CiscoWorks LMS 3.2 exporting bulk Configuration
Does anyone know an easy way to bulk export configurations off Ciscoworks LMS 3.2? The only thing I found is the cli command export config u cwcli.exe - p-unit %, but it exports in XML format which is not very readable. Prefer a text file format. Someone at - it suggestions?
CLI, it is the only option, but what you can do to get the files in TEXT format is, you can connect to the server and
go to this site: NMSROOT\CSCOpx\files\rme\dcma\shadow
* Sides encourage contributors *.
Tags: Cisco Network
In my business, we look adds a network management solution:
Some time ago, we installed CiscoWorks LMS 3.2, but we decided to install on the other more modern solution, what is the solution which recommend me?
1 000 devices from cisco management.
Regularly perform massive configurations.
Constant monitoring of the network infrastructure.
Backups of configuration.
We have two solutions:
-Update the current CiscoWorks to LMS 4.x version
-buy the "First Cisco LAN Management" Solution
What solution that recommend me?
Thank you for your attention.
The current product packaging is a bit confusing. Cisco is rebranding all of their management under the aegis of the first Cisco solutions. All prime products have a common appearance and take advantage of some approaches architectural. From LMS 3.2 on 4.x will put you in the first territory of Cisco.
In the 'first' products are (among others) "Cisco first Infrastructure" (also known as PI - 1.2 is the current version) and "Cisco first LMS" (4.2.3 is current). Preferred Infrastructure (1.0) began in the successor to management wireless Cisco (NCS) product and had been adding features on the way to bring it up to parity with LMS functionality to wired infrastructure. He isn't quite there right now (current comparison here) that existing customers of LMS are usually advised to stick with the latest version of the LMS for now.
Still with me? Good. If the extra twist is that 4.2 LMS is "included" with licenses of FT 1.2 - see the link guide below. So, if you want LMS 4.x, you order indeed 1.2 FT with licenses "Cycle of life" according to the number of devices you manage. (There also is 'respect' and 'insurance' adding these new features of the respective licenses. Compliance is available from LMS 4.2 in the CAAM. Insurance is almost a FT 1.2 functionality only.)
So my recommendation to you would be to upgrade to version 1.2 of PI and to install and to use the LMS 4.2 (4.2.3 and put patched up-to-date with all the packaging of the products). If you have a VMware configuration, deployment option flexible device (file eggs) is the easier implementation,.
You may find it useful to explain this point of view of Cisco the following two links:
Don't worry not-all this will not be on the test.
I just don't understand?
What is the point of the feature to import/export of Configuration MAX and why my version of the installer allows (not need) to set?
We have a project that has been developed on a chassis NI PXI-1044. He now resides in a configuration management system, and sometimes we want to remove to make changes and build on a system that now knows nothing about PXI/chassis/controllers/etc, etc. In fact we have more material. But this Configuration hardware option within the construction of the Installer seems to require a configuration by MAX file on the host system used for the generation of the project. Is no longer the PXI-1044 chassis but another PC altogether.
Why is this hardware configuration option exists? What is its usefulness when it comes to the installation of an integrated (such as an installation program) project. Why I can't live without it?
It is perhaps a fundamental issue, but it makes no sense to me. I come from a background of the conventional script-based programming (C / C + c++ / Ada etc.).
The hardware configuration is not at all unique to LabVIEW and you also use it with all the other languages where appropriate. The configuration includes the names of devices, custom scales, tasks, etc. Include you the configuration that you have created on the original pc or recreate it on the deployed pc. If you have not used MAX for any configuration, so you do not need to export/import but correct detection name, scales, etc. have all be integrated into the program itself.
I am creating a poller to monitor the trap of the temperature of my cisco catalyst 2960 Ciscoworks LMS 4.1.
I created a snmp trap on my device:
Switch(conf-t) # snmp-server <@IP_server_LMS>SNMPv2c host -I use SNMPv2c
Switch(conf-t) # Server enable snmp traps envmon temperature
I created a MIB model Envmon with these variables:
-ciscoEnvMonTemperatureStatusValue -ciscoEnvMonTemperatureState -ciscoEnvMonTemperatureLastShutdown
I created a poller associated with my model, I add my device and when I click on 'Next', I have this error message:
No instance are in the devices. This could be because the device is inaccessible, the device does not have the case for selected models or the timeout value is low.
Could someone explain to me why I can't monitor MIB?
Thanks for your consideration and Merry Christmas to all!
It seems that most of the 2960 have a temperature sensor implemented in hardware and therefore, it shows no values.
If a device does not show anything on CLI, it is almost impossible that it will display something via SNMP.
HI, I want to know if the 3850 switch is supported in ciscoworks LMS 4.0.1 I added devices, successful inventory collections but peripheral icon is blue with question mark '? ' and config sync always fails.
I tried to download the packages to install it, but I couldn't find it.
Thanks help fo
3850 is supported on LMS 4.2.3. Check the list supported here:
You must upgrade to 4.2.3 LMS or 1.3 FT go.
*Side encourages contributors and it's really free. **
What is the best export the configuration when you want to place your video on Facebook or youtube
Here are the high quality requirements of Facebook: How can I ensure my videos are of high quality. Facebook Help Center | Facebook
I have improved my OpenSUSE 12.3 to 13.1 and now I am not able to export the configuration of the IOM. When I click on export in the System Administration Portal, the popup window is opened and closed immediately.
I have the same problem on Windows 7 with JAVA more recent.
Very interesting, is that the export of the IOM 126.96.36.199.0 configuration works very well. In the version 188.8.131.52.0 not!
Do you know how to solve this problem? (btw. I don't want to demean my Linux or Windows with Java)
I think it is a bug in the IOM.
Thanks and greetings
Oh... we discovered what the problem.
DB password expired yesterday!
How to export the configuration information for each group? (I want to see the information that this group has read or write access to the cube XXXXX)
By LCM, I was able to export information on groups and users. But no information about its commissioning. can any body tell me how can I get the configuration of shared services information
We have a utility to do this, or can we get this information using LCM?
Any information about him will be useful
The commissioning is under Application groups > Foundation > Shared Services > native Directory > assigned roles > then choose the product / app
There is a utility command line available if you want to automate the process of execution of export - Oracle Hyperion Enterprise Performance Management System Lifecycle Management Guide, you create the definition of migration file but which can be done by running an export.
See you soon
Anyone know of a tool or technique (existing script of VI?) for existing bulk export of the panels prior to project in PNG or JPG?
Looking for a handy tool to generate solutions for the user interface across multiple products. Otherwise, Alt-PrintScreen is my rescue [ineffective].
Hope this helps you.
I trusted recon about 20 k users of TFTP.
With the help of accesspolicies I need to grow near 8 k users in downstream applications.
Because of the connection pooling issues/network, if the target system fails,.
What is the way to make a new attempt to bulk of all configuration tasks failed.
All entries on this.
All the tasks in a rejected State are listed in the table of ITO. Also on standby and waiting are here, but you can query to simply rejected. Then you can either start over in bulk
retryTasks (long  taskInstanceKeys)
or try one at a time
retryTask (long plTaskInstanceKey
You can create a simple scheduled task to retry them.
I have problems with the procedure for recovery of password on a 3.2 CiscoWorks installation. The problem is that I have no idea what versions of software are running (track never cared).
I tried following the steps here: http://www.cisco.com/en/US/products/sw/cscowork/ps2073/products_password_recovery09186a0080107dee.shtml (twice) and I was impossible to reset the password.
Is there something that I am missing? Something extremely obvious I forgot?
Thanks for any help!
Use the resetpasswd utility:
The apps were running smoothly, but after a suddenly cut power that affected the (stand-alone) server, it was not possible to loggin again.
We got the login screen, but after typing user/passwd, appears a blank screen (done) and nothing else.
Each process runs normally, except the process = EssMonitor = ESS Info is entirely online!
Can you guide me to solve this problem?
Thank you very much
regdaemon. XML has been damaged. It is therefore more correct XML. It was probably truncated in the feeding tube. If you don't have a good backup of LMS, you must uninstall and reinstall LMS from scratch. You will not be able to preserve your data because restore this file regdaemon.xml will corrupt so all future installations.
Recently, we had a major outage with our two ESX 4.0 host. Initially, they would take extended periods of time to perform simple tasks (reset of VMs, the host migration, etc.) without completing successfully. After restarting the service mgmt-vmware on one, he has started not back until I killed the process go. He then returned to the top, but wouldn't connect the server vCenter (4.0 update 3). Finally, the second host disconnected for unknown reasons. Now, we are trying to shoot the balls to vCenter to understand what has happened and we have questions.
When it is connected to vCenter using vSphere Client I go to file > export > export system logs and an immeidately error message stating "cannot create a beam of diagnosis. I then log on to the vCenter server and click Start > all programs > VMware > generate vCenter Server log bundle and a quickly flashing error message that makes reference to the vc - support.wsf cscript giving a "VBScript runtime error: component ActiveX cannot create object:"Scripting.FileSystemObject"'." Any ideas on what may be limiting pull me the papers?
I found a few kb´s.
check if help.
Please, do not forget the points of call of the "useful" or "correct" answers
Mauro Bonder - moderator
We have a lot of ONS 15454 and CiscoWorks LMS 4 apparently does not support these devices (I can't pick the cards ML1000 configurations or configs of chassis).
Can I save the configurations of the STC cards/chassis using the CTC? I see a backup option of database under maintenance contract, but I'm not entirely of this make. Basically, I want to assure you that if one of these devices suffers a hardware failure, I have backups of the way in which the circuits are provided.
Is there a better tool to use?
Any advice would be great
For nodes to backup through the CTC, the Cisco ONS 15454 procedure Guides describe the steps to be taken to save the nodes (section below the latest version is:)
Cisco Transport Manager is a management system of item available for the largest optical networks and has features to back up the databases of several nodes.
NTP-A108 back up the database
This procedure saves a backup version of the TCC2/TCC2P (software) database on the workstation running Cisco transport (CTC) controller or a network server.
Required / have required
Mandatory. Cisco recommends to perform a backup of database at intervals of about a week and before and after configuration changes.
Onsite / remote
On-site or remotely
Maintenance or higher
Note You need to back up and restore the database for each node on a path of the circuit in order to maintain a complete circuit.
Note The following settings are not backed up and restored: node name and Internet Inter - ORB Protocol (IIOP) port. If you change the name of the node and restore a backup of a database with a different node name, the circuits map to the new node name. Cisco recommends keeping a record of the old and new node names.
Step 2 Click it maintenance > Database tabs.
Step 3 Click on backup.
Step 4 Save the database on the hard drive of the workstation or network storage. Use a file name with the extension of .db file. for example, database.db.
Step 5 Click Save.
Step 6 Click OK in the confirmation dialog box.
Stop. You have completed this procedure.
I'll put up device Fault Manager in Ciscoworks LMS 3.0.1
For the moment, we used what is gold (ping) to alert the team of Technical Support if the devices go down. As you can imagine, they receive hundreds of emails every day to inform them that these devices are going up and down etc...
Ciscoworks may draw attention to more detailed information, I would like to alerts configuration for the team of support when the devices goes down/crash/inaccessible etc. using SNMP. These devices do any configuration on them to attract the attention of Ciscowork. They are already syslogs send to the Ciscoworks server. What settings will suffice for these devices down?
Also, I have more questions, for notification of SNMP trap on the Ciscoworks server, what information should I put here?
DFM version is 3.0.2
First of all, I highly recommend that upgrade you to 3.0.3 DFM. There is a serious enough problem that can cause the whole of the LMS to failure if some that are installed on the system. This bug is fixed in 3.0.3 DFM.
If you wish to inform your operators based on syslog messages, you can set up automated actions to do so under RME > tools > Syslog > automated Actions. Any time a corresponding syslog message is processed by the RME and e-mail can be sent, or a script can be executed.
While DFM can treat some traps, it is mainly based on SNMP and ICMP on election to build its events. Therefore, as long as SNMP and ICMP connection exists between your server and your devices, you should be set. You can configure notifications DFM under DFM > Notification Services. I recommend that when you set up your Notification Group, just check you the option buttons in events. Events contain specific details about a defect of the device. Alerts, contain a roll-up high level of several events. DFM notifications can be sent as e-mail, traps and syslogs.
Maybe you are looking for
Can someone please tell me why my iphone 6s has just completely off after/while (im not sure that I was asleep) iOS update? everything was going well with the phone except for a crack in the screen, so I am really confused as to why he died so sudden
Hello after update of online store, a crash about with white screen.Dear support, I need reset account id: 33197 / sn: Z9018629DH Thank you very muchBest regards SKunkTN
Hello. I just want to save the data in real time to excel automatically, but not need to open excel collection "ExcelRpt_ApplicationNew (1, & appHandle);' will open the excel. Is there way to connet to Excel? Thank you.
trying to connect printer to computer hp 940c hp laptop pavilion via a USB cable conversion... windows vista
Hello I'm doing a simillar e-mail request to whatsapp. My first approach is a listfield with an inputtextfield on the bottom. For that, I am on the field of text with setStatus. I am facing problems: -Have the inputtextfield worn when the screen disp