Citrix connectivity after updating to 2.3 problem

Similar Questions

• My Macbook Pro does'nt connect after update to 10.11.6

  Hi all.

  After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

  An advise, please.

  Kind regards

  Fabio

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Satellite C660 - no Internet connection after updating BIOS

  I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

  Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

  Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

  Hey Buddy,

  The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

  You can access the Internet now?
  You try to access the Internet with LAN or WLAN connection?

  Also check device manager if all devices are recognized correctly.

  > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
  You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

• Citrix Access Gateway does not connect after update June 17

  I am running Citrix Access Gateway on a Windows 7 64-bit Client computer and as updates on 17 June, it does not connect.

  Have you checked with Citrix technical support? This would be my first step. If they cannot help, contact the technical support of MS for Windows Update.

  Support for Windows Update -http://support.microsoft.com/gp/wusupport

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  If you are not in the Canada or the United States, there are numbers to contact local support here:http://support.microsoft.com/common/international.aspx
  MS - MVP - Elephant Boy computers - don't panic!

• Problems of delays and of connection after update 5.1 (2)

  AIM/chat and other programs are timeout/connection problems after upgrading to 5.1 (2). I also use S241. Connection problems stopped when the IPS has been set to avoidance. IPS rebuilt and left to default sigs and the problem still occurs. I don't see any IP addresses that have the problem in the observer of events or the events of IDM.

  Of the known problems with the 5.1 (2) which would cause this type of problem?

  I do not particularly, but I noticed that 5.1 (3) was released today.

• ITunes can't connect after update to iOS10 - invalid response

  My iPad or IPhone 6 Air can connect to iTunes on my PC Windows 10 after the Apple iOS 10 software update yesterday.  The error message is "iTunes could not connect to the iPhone because of the invalid response was received from unit.

  Short of wiping and restoring, I tried all the options such as changing strings, trying different USB ports, disconnect all the devices, re-booting, troubleshooting peripherals in Windows, etc., without success, anyone else having this problem? Someone at - he found a way to fix without wiping and restoring?

  I tried the restore via iTunes mode. Software downloaded and extracted.  Then I get the error message "the iPhone could not be restored. An unknown error occurred (3194). »

• Pavilion Sleekbook 14-b000: unable to connect after update

  Hello.. I'm at my wits end trying to "fix" this problem of mine.
  It all started when I got a Ransomeware virus, I downloaded some antivirus software (AVG, kaspersky, Malwarebytes) to remove the virus from my laptop. He worked in a way if my files are gone. I read on a site that I have to reformat my laptop to completely eradicate the virus. So after that Kaspersky did a complete and all analysis, I got an update from Microsoft. Without thinking too much, I clicked on "update & Restart', which was a big mistake I guess... the patch was fine til he was stuck or frozen for 6 hours... looked up Google again and I just did a hard reboot for it. Laptop was fine again til when I tried to uninstall Kaspersky, when suddenly the blue screen appeared with a sad smile, saying: you need to restart... and I clicked on restart. After the reboot, I was sent to the usual display of the Date and time before entering the login screen. That's when I noticed now that my keyboard, touchpad and external mouse doesn't seem to work. I couldn't connect anymore. Looked up on Google on top of many sites for this correction... seems simple enough... all I had to do was either do a system restore, refresh or Reset... you all one by one... and none of them worked. Could not do a refresh or back to zero because the message says I have no drive partition or something and my drivers are blocked... System Restore didn't work cos the message said that an Antivirus program blocked or something and that I should uninstall it antivirus software FIR... But I can't connect even in safe mode... and I checked if it's just like the keyboard material that gives me this problem... It's not like I tested it in the recovery menu or something... can't remember I'm so tired
  So now I'm stuck with a brick of a laptop that only shows me the time and date of the day... I don't know what else to do... and I'm not a computer person... so I hope there is a way to fix this big mess...
  And thanks for reading the whole problem of long breath of my friends... I'm sorry.

  Have you tried a system recovery? See section-"recovery when Windows does not start correctly:

  http://support.HP.com/us-en/document/c03489643#n144

• Cannot connect after update monthly weather gadget.

  Hello, my weather of MS gadget just stopped working right this morning after the reboot required by the monthly batch of updates that happened recently. It just says: unable to connect to the service. Any attempt to change the city just returns not found location. No other changes have occurred on the machine outdoors updates MS. Suppression and relocation of the gadget have the same results. The gadget, however, works very well on the administrator account, but all the standard users see the just failed to connect to the service. I even added a new standard user account and the problem persists. I tried most of the things that I could find in the forums but no luck...

  Have you checked if your Internet Explorer is not set to work offline.

  Update:
  Microsoft has DISABLED the weather gadgets and currency via a recent update of security, because of worries about the vulnerability associated with these gadgets running on your computer. You can read more here: http://support.microsoft.com/kb/2719662 . Adjust the settings of your computer and all these other 'suggestions' people are, will NOT work. The function has been REMOVED from the operating system. It has also been removed from Windows 8 operating system. There are "theorists" who agrees that there is a security problem in the gadgets or Microsoft just doesn't support gadgets (usually from third party software) and has therefore disabled them in Windows 7 and eliminated in Windows 8.
  Thanks to DaveNYC for the Info. Pass the word, because a lot of people is facing this problem just like you.

• Firefox on Win XP does not connect after update! Possible causes?

  Two weeks ago Firefox auto-installé the latest version. The browser immediately lost the connection with the internet. I can't open new sites t and already open tabs cannot be updated.
  I have since trip, where the late issue.

  For better or for worse the Windows Firewall is not enabled.

  I am running Windows XP Pro on an AMD dual-core computer.

  The strange thing is a previous instance used Opera as your primary browser seems to work perfectly, I use it now to write this.

  An attempt to install of Google Chrome has failed due to internet connection issues?

  Latest Firefox on a Linux partition works perfectly afaics.

  A new upgrade of a downloaded installation file did not resolve the issue, nor has an uninstall and a clean reinstall.

  I have in any way tinkered with the options of the browser, or the internet connection before the problem.

  Grateful for the advice.

  Best

  Phil

  As far as I KNOW, the only way to really disable the Windows Firewall is by installing another firewall program.

  12 ways to be fooled by the firewall:
  
  http://forums.mozillazine.org/viewtopic.php?p=2295421#p2295421

  http://KB.mozillazine.org/firewalls

• WiFi never connects after update to 4.1.57

  Last Thursday, I bought my phone. I had a few minor problems, but now I'm angry. My phone is connected to my WiFi fine until today. In other words, until I updated to 4.1.57. Now, even if the WiFi is enabled on the phone, and security is configured correctly, the phone never successfully get an IP address. I can see my wireless router that there is an IP address for my phone. And when I select my network on the phone, it indicates that the signal is excellent.

  Analysis...

  Obtainin IP...

  Not in the beach, remembered, secured with WPA/WPA 2 PSK

  New cycle traverse, then ends with

  Not in the beach, people with disabilities, secured with WPA/WPA PSK 2

  and then he simply repeats the cycle - sometimes "remembered", sometimes "off." Never connected.

  Any ideas?

  Oh yes, my wife has a purchased the same day. Again, the WiFi worked all day until that we have installed the update.

  NOW, any ideas?

  Now for the answer: I used the troubleshooter on the Motorola support site which gave me about 8 things to try. I did the 6 first last night on my own. The next thing to try is to restart my phone so my WAP. I turned off the phones and powered router myUVerse market. Once the router is up, I turned on the phone and they worked immediately.

  My phone is fun again!

• Unable to connect after update of the preflight IOS app

  Since the last update of the application of DPS preflight on iOS, I am unable to login to see the projects. I am able to connect to the DPS dashboard with the same username/password.

  What should do?

  Thank you

  Ulrich haha

  The app apple approved is not oriented to our production department. The dev team is aware and is working to solve this problem and get a new construction submitted to Apple for review.

• Unable to connect after update

  I was invited by my Ipad it needs to update. I ran the update and received a message that he was successful, and I have to follow a few steps. When I choose my network, it won't turn on. It worked 100% before the update

  If the notice you received is on an error with Apple's Activation servers,

  There is a problem known/glitch with Apple activation servers.

  Apple, I think, recognize and acknowledged this problem with difficulties with some models of iPad activation server and have stated that they are working on this issue and it will be resolved as soon as possible.

  I hope more early.

• OME - cannot connect after update 1.3.

  Hello

  I have upgraded to 1.3 1.2 OME and can connect is more - it hangs right on the start screen.

  Install the journal + splash screen error is less. You see where it went wrong?

  2014-03-26 10:19:55
  "C:\Program Files\Dell\SysMgt\Essentials\bin\WebInstall\InstallUtil.exe" - DatabaseOptions 32-i - WebsitePath "C:\Program Files\Dell\SysMgt\Essentials\WWWRoot\Essentials" - WebsitePort "2607.

  Program.RunInstall (...)

  Website unzip started...

  Uninstall started Web site...

  UpdateRegistration (True)
  Site Web uninstall completed.

  OmeDAService.Uninstall)
  Killed process: Dell.ManagementEssentials.Service.DAService
  Killed process: Dell.ManagementEssentials.Service.DAService
  Killed process: Dell.ManagementEssentials.Service.DAService
  Service exe file not found: C:\Program Files\Dell\SysMgt\Essentials\Services\DAService\Dell.ManagementEssentials.Service.DAService.exe

  OmeHostService.Uninstall)

  OmeHostService.Uninstall () - complete

  Deletes the file DLL of CLI...

  The removal of the finished the CLI DLL file.

  Database.Install (...)

  Database.UnzipDataScripts)
  -10.20.04 C:\Users\terenceadmin\AppData\Local\Temp\OMEssentials-2014-03-26
  -DatabaseAdd.sql
  -UpgradeOMEssentials, 1.0.0.30.sql
  -UpgradeOMEssentials, 1.0.1.1253.sql
  -UpgradeOMEssentials, 1.1.0.6063.sql
  -UpgradeOMEssentials, 1.2.0.1160.sql

  LoadSqlLogin()
  Open a SQL Server connection to validate.
  Runs a TSQL.

  Server name: \SQLEXPRESSOME (local)
  The database name: OMEssentials
  Script:
  SQL login: Yes

  RemoveWindowsGroups (...)

  LoadApplicationGuid (...)
  Adding a Guid of the database application.
  Complete unzip Web site.

  Installation of site Web started...

  UpdateSiteRedirection()

  Full UpdateSiteRedirection() - saved changes

  UpdateVirtualDirectories()

  UpdateAuthentication()

  DisableAuthenticationSection (..., OpenManage Essentials/Web, system.webServer/security/authentication/anonymousAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Web, system.webServer/security/authentication/basicAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Web, system.webServer/security/authentication/clientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Web, system.webServer/security/authentication/digestAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Web, system.webServer/security/authentication/iisClientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., Essentials/Service OpenManage, system.webServer/security/authentication/anonymousAuthentication)
  DisableAuthenticationSection (..., Essentials/Service OpenManage, system.webServer/security/authentication/basicAuthentication)
  DisableAuthenticationSection (..., Essentials/Service OpenManage, system.webServer/security/authentication/clientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., Essentials/Service OpenManage, system.webServer/security/authentication/digestAuthentication)
  DisableAuthenticationSection (..., Essentials/Service OpenManage, system.webServer/security/authentication/iisClientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/FileAccess, system.webServer/security/authentication/anonymousAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/FileAccess, system.webServer/security/authentication/basicAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/FileAccess, system.webServer/security/authentication/clientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/FileAccess, system.webServer/security/authentication/digestAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/FileAccess, system.webServer/security/authentication/iisClientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Help, system.webServer/security/authentication/anonymousAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Help, system.webServer/security/authentication/basicAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Help, system.webServer/security/authentication/clientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Help, system.webServer/security/authentication/digestAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/Help, system.webServer/security/authentication/iisClientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/WebServices, system.webServer/security/authentication/anonymousAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/WebServices, system.webServer/security/authentication/basicAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/WebServices, system.webServer/security/authentication/clientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/WebServices, system.webServer/security/authentication/digestAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/WebServices, system.webServer/security/authentication/iisClientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/setting, system.webServer/security/authentication/anonymousAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/setting, system.webServer/security/authentication/basicAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/setting, system.webServer/security/authentication/clientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/setting, system.webServer/security/authentication/digestAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/setting, system.webServer/security/authentication/iisClientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/api, system.webServer/security/authentication/anonymousAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/api, system.webServer/security/authentication/basicAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/api, system.webServer/security/authentication/clientCertificateMappingAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/api, system.webServer/security/authentication/digestAuthentication)
  DisableAuthenticationSection (..., OpenManage Essentials/api, system.webServer/security/authentication/iisClientCertificateMappingAuthentication)

  UpdateRegistration (False)

  Web site installation is complete.

  Program.UnzipFile (...)
  File: C:\Program Files\Dell\SysMgt\Essentials\bin\WebInstall\Services.zip

  OmeDAService.Install)

  OmeDAService.Install () - complete

  OmeHostService.Install)

  OmeHostService.Install () - complete

  Program.UnzipFile (...)
  File: C:\Program Files\Dell\SysMgt\Essentials\bin\WebInstall\Tools.zip

  EventLogs.Install)

  EventLogs.UninstallLogSources (...)

  EventLogs.UninstallLogSources (...) - full

  EventLogs.UninstallLogSources (...)

  EventLogs.UninstallLogSources (...) - full

  EventLogs.Install () - complete

  2014-03-26 10:20:21
  "C:\Program Files\Dell\SysMgt\Essentials\bin\WebInstall\InstallUtil.exe" i - patches

  Program.RunInstall (...)

  Database.ApplyPatch)

  The database is not compatible with the version of the fix 1.2.0.1160

  No patch of the database have been applied.

• After Update 9.3 activation problem

  I just installed the iOS 9.3 and I can't activate my Ipad! I tried several times without success.

  I went on the apple site but no help at all that can than I do?

  He just wrote that the server is not available for s...

  Thank you

  Force restart your iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

• WiFi problem after update of lollipop

  Is anyone having problems with their wifi connection after updating to the pacifier. Mine was working fine before the update. A move 35mbps ookla speed test download when connected to my home fibre broadband before the update, but now even hit 1mbps after update. Keep buffering when watching videos. Home broadband Checked speed on pc and getting 34mbps so it's not my Internet problem. Would appreciate ideas. Thanks.Using xperia D6603 z3.

  That's what I'll do, fix the phone with PCC

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

  and uninstall any antivirus > check again.