Clarification in the Certification Vmware Technology

Similar Questions

• To hold the certification vmware certified advanced course is necessary? What pre applicant?

  To hold the certification vmware certified advanced course is necessary? What pre applicant?

  
  
  ________________________________

  Thiago Rodrigues | Network management

  Associate. [email protected]

  Mobile: (011) 6122-0994

  www.DIGISYSTEM.com.br

  Engine certified Manager

  Certified Itil v2 Foundation

  ________________________________

  Minimum is to be SECURE, after that you can go without any course.

  http://www.VMware.com/go/VCAP

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• advice on the first VMWare certification for a beginner.

  I'm looking to get my first vmware certification. Something that will not be for a long time so I can get motivated to keep going further certifications.

  My experience with vmware has implemented via vcenter servers, using models to build servers, have built esix hosts, created esxi clusters, knowledge of vmotion.

  Any advice would be much appreciated.

  Anthony

  Since you are already experienced with VMware datacenter product, I highly recommend you take a look at the path of the certification VMware Data Center Virtualization: http://mylearn.vmware.com/portals/certification/

  You can start taking the VCA - VTC, which is not a requirement of class and you can take the test online... Another option is to go directly to VCP - VTC, but you will need a requirement of class and to test on Pearson VIEW.

  See the following links for more information:

  (VCA - VTC) VCA-data center virtualization

  (VCP5-VTC) VCP-Data Center Virtualization

• Contact the Certification examination test after the accident?

  I'm trying to find out who to contact to have my revised test?  It crashed during my attempt to DCD, and I was actually very shocked to fail, as I was very confident for the majority of the questions.

  What is the process of having this review?

  Thank you!

  Send an email to [email protected]. Include as much detail as possible with case No. Pearson.

• As part of the certification NAS RHEL 6 guest operating system is recommended. We see that the STAF Installation fails on RHEL 6. Because of this issue, can we use RHEL 5.7 as guest operating system?

  As part of the certification NAS RHEL 6 guest operating system is recommended. We see that the STAF Installation fails on RHEL 6. There is no rejection of STAF for RHEL 6.

  Because of this issue, can we use RHEL 5.7 as guest operating system? If so, it will lead to problems when VMware Certification?

  Seems to have been solved in WB 3.0.1

• New certifications VMWare VCP

  Hello.
  I need your help to understand how to manage with the new VMWare certifications.
  I saw all the certifications are now named VCP5-XX, the 'simple' VCP5 disappeared almost everywhere at VMWare.
  Since I'm VCP4 and VCP5 certified, I would like to know how to handle this.
  The VCP5 have no meaning more at VMWare and I have to take other exams to update to VCP5-XX?
  Will be the VCP5 updated automatically with one of the names of this new?
  If so, why in myTranscript and logos I can still see the simple VCP5 of 'old '?
  Can anyone of you please help me with a clear explanation of what's going on?
  Of course, any document on this subject or any kind of help is welcome.
  Thank you all for your support.
  Kind regards.

  For the traditional PVC based on vSphere the suffix - DV is just a change of name/rebranding exercise. The secure Channel branding now applies to 3 areas of different products as follows:

  VCP - DV = data center virtualization (vSphere)

  VCP-Cloud = cloud (vCloud Director)

  VCP - DT = Desktop (view)

  So VCP5-DV is the new name of VCP5, and you are a VCP4-DV and a VCP5-DV.

  I don't know if/when that VMware updates transcripts/logos.

  Scott.

• Install the server Vmware View connection

  Hello

  I have problem install vmware view connection server, my server has already joined ActiveDirectory, but I can't install vmware view connection to the server

  

  Help, please.

  Thank you

  Hudan

  It simply means that the client does not like your server certificate.  You should be able to click on configure SSL and change the certification autour options to make it work.

• Clarification of the DRS

  A clarification of the fast, if you don't mind.

  I have 3 groups of resources hung off root: high, normal, or low. There are 2 virtual machines within the high, 2 in the bottom and the rest are in normal.

  Each of the groups of resources have their limits and extensible settings the value 'Unlimited' and 'Yes' respectively. Is it the same as that of all virtual machines in the Normal group? i.e.There is without real time resource to go because whenever a group needs more resources, it is just what he needs of the parent (until, in the case of memory that the virtual machine has defined within its own parameters).

  Thanks for your comments.

  GlennBrett wrote:

  Each of the groups of resources have their limits and extensible settings the value 'Unlimited' and 'Yes' respectively. Is it the same as that of all virtual machines in the Normal group?

  It is effectively the same as that of all virtual machines in the resource pool root, unless you set actions on subordinate resource pools.

  i.e.There is without real time resource to go because whenever a group needs more resources, it is just what he needs of the parent (until, in the case of memory that the virtual machine has defined within its own parameters).

  There are ALWAYS resources planning going on! By defining "Unlimited" and "Expandable Reservation" you prevent resources covering before complete depletion of the system.

  Thanks for your comments.

  You are welcome!

  Ken Cline

  VMware vExpert 2009

  VMware communities user moderator

  Blogs about: http://KensVirtualReality.wordpress.com/

• Can someone give me information on the certification of Toshiba?

  Hello
  Can someone give me information on the certification of Toshiba?
  I'm really interested to take one of them, but I really couldn't find any place to get information.

  By the way, I am in Australia now, so it would be better if there is some information on
  Certification of Toshiba in Australia

  Thank you

  Hello

  What do you mean with certification of Toshiba?
  Do you want to know more about the Toshiba warranty?

• Satellite L750-1PH - how to activate the Turbo Boost technology?

  Hello

  I want to activate the * Turbo Boost technology *. But I don't know how.
  And the fan makes a lot of noise and hot air of spit.

  I will be very happy if you could help me :(((

  Thank you
  Best regards
  * Bahad? r ACAR

  You have Intel Core i7-2670QM processor and this processor supports Intel® Turbo Boost technology 2.0

  These features of the CPU can be enabled and disabled in the BIOS. But just in case where this option is available in the BIOS.
  When this option isn't available, you will not be able to put ON or OFF

• How to disable the functionality of the hyper-threading technology

  How to disable the functionality of the hyper-threading technology

  Hello

  I put t know what BIOS you have, but generally you can activate or deactivate this option in the BIOS.

• Seeking clarification on the SFD in AKM Brushless Servo Drives

  Dear members,

  I'm looking for clarification on the smart feedback device (SFD) installed in the series of servomotors AKM. There is little information available on this subject in the specifications. It appeared that it offers a very high resolution, information on the position of the rotor high precision signals.

  1. how exactly is the PCG provides the position of the rotor?

  2. is there a provision to contract low resolution effect Hall of EPD type feedback?

  Thank you.

  Ansari07

  Hi Ansari07,

  I don't think that this level of control is possible with the AKD. The reader is supposed to close its own current loop on board for the control of switching and outputs of phase. The AKD offer couple, speed or modes of control position, and you can talk to it by Ethernet on the service port, via a field such as EtherCAT or CANOpen bus, or with an analogue signal +-10V or step/dir commands.

  I don't think you can get around all of the internal firmware in the AKD and get direct control of how current passes through the phases.

  Best regards

  Nate

• MFP HP LaserJet Pro M126nw: Clarification of the use of HP Laser Jet MFP M126 nw Pro Page

  Hi support them.

  Recently, we bought a new HP Laserhet MFO M126nw Pro. The cartridge came with the new printer. I need a clarification of the HP Laserjet Pro MFP M126nw on the usage Page.

  We want to know how many pages that the printer has taken so far, printing and also how many pages is analysed and the copier took how many pages.

  I have attached the report using page for your reference.

  Please specify the things below.

  Pages for the scanned copy = 65

  I think he has counted only scanned copies 65.le is okay?

  2. What is Monochrome pages printed from copy = 66

  3. What is pages scanned host = 86

  4. print engine:

  1. total Impressions showing 829.

  Overall, I think it's showing printing, copier, 580 the scanned pages. Is this OK.

  2. What is jam events?

  It's showing 1.

  3. What is EconoMode Impressions?

  showing 0.

  4. What is monochrome prints?

  showing that 829

  Need to clarify the details above for my knowledge.

  Your support is much appreciated.

  Thanks in advance

  Concerning

  R.Pradeep

  the digital and print values are different.

  pages scanned copy 65 - this means that 65 pages have been executed by the scanner with someone using the copy function. the report shows 66 printed pages 'copy' which means 64 of these copies were only a single copy and 1 scan someone made 2 copies - which gives you a total of 66 pages printed from the copy function.

  pages scanned to accommodate 86 = that means 86 pages were executed by the scanner with a person who uses the "scan to network folder" or "scan to computer" function

  That's a total of total of 151 pages run through your scanner. only 2 values that you add to the scanner are the "copy" and «scan to host» numbers copy of 65 + 86 scan-to-host ='s 151 total scans

  total impressions are 829. pages printed from copy fuction are 66 - if you subtract 66 829 that gives you the number of pages that have been printed from a computer = 763

  763 pages printed computer + 66 pages printed using the copy function = 829 total number of pages printed

• H9-1350 impossible to activate the Hyper-V technology

  I just bought a new Phoenix h9-1350 HP Envy, running under Windows 8 64-bit on i7-3770. I want to activate the Hyper-V technology. I have looked at the BIOS settings and cannot see an option for Data Execution Prevention. According to other threads like this one to another desire with the same motherboard, it should be in respect of the security of the system. But all I see is the option for virtualization.

  Does anyone know if there is another way to turn on DEP? Do I need a BIOS update? The version I see is FOR_814.ROM V8.14

  TIA

  Hello

  You must run Windows 8 Pro and VT must be enabled in the bios.  Go to the Control Panel - programs and features, and then click Windows features turn on or off.  Check Hyper-V as it is not defined by default.  See the image below.

  

  Click OK, and then restart.

• where the virtualization is technology BIOS setting aspire v5-561-6607

  where the virtualization is technology BIOS setting aspire v5-561-6607