Classic blackBerry BB classic OS10 battery monitor bug

Similar Questions

• Battery monitoring software shows 0% of costs - Satellite 1900

  My Satellite 1900 ceased to charge the battery. It works very well on sector and says he is in charge, but when you check the Xantrex battery it says 0% fees. Up to this point, the battery appeared well with use of 1-2 hours to charge.

  Is this a problem with the computer or battery, monitoring software, or the battery would have an instant failure? The computer had not been moved since the office then had not been dropped or hit.

  I put t think there is a problem of battery or material. Looks like that the laptop works properly with the power of the battery.
  Try to access the Toshiba Power Saver and go to the last tab called battery power meter.

  Here, you can click the icon for individual battery for more information. Maybe the setting should be reset only.

• Satellite L10 - 102 - battery monitor programs do not read the batteries

  Hello

  I downloaded toshiba L10 drivers yesterday and I set up bios driver today after that my battery was not readable by the battery monitor and other programs.
  Has not changed in the Bios, but my battery is now unreadable.

  features
  Toshiba Satellite L10-102
  battery EEPROM: bq80201dbt

  This means that you can not start your laptop with battery power only?

  What happens when you follow:

  Remove the battery
  Departure for laptop with power supply only and when the operating system is fully loaded, put the battery inside. Battery is correctly recognized?

• BlackBerry curve 8330 Smartphone battery life

  Hi, I'm new to blackberry and love my Curve 8330, but I have to charge every 18 hours. I speak more than I did on my cell phone and was able to get a few days on a regular battery. Is there a way to get more life out of it?

  Thank you

  Luis

  Thanks drizzt09, I will monitor the battey and see if that helps. I appreciate it.

  Luis

• BlackBerry Smartphones phone slow - activity monitor - the file manager/Explorer

  In fact, I have 3 questions that are more or less related I think.  (1) I installed a lot of apps since getting my 9530 Storm a few days ago, especially to try.  Since then, occasionally when I try to do something, I'll see just the icon of "transformation" (the circular icon with the one hand forward like a clock) for a very long time.  It is not always the same app or thing I try to do.  I suspect that * part * of the problem is that I was not closing apps - that moving from one to the other, and he left running in memory to the bottom of things (in particular, I suspect PocketDay and Internet browser for it).  Keep the battery solved the problem every time.  This leads to my next question: (2) is it a kind of application or activity monitor app which will let me know what programs are juice?  I saw a kind of app somewhere that is supposed to kind of manage the memory and do a "battery pull reboot" without physically pull the battery.  Maybe that's what I'm looking for.  (3) is there a kind of thing edge file manager/Explorer?  I know there must be an app for this, and I have no problem any display on my lap as mass storage.  I'm talking about something from the BB itself.  Recommendations for a good?   Thanks for any comment on this.  I will do this kind of things slowly, but thought it was a jet-out for some ideas.

  Hello!

  Lots of advice... start here...

  There are three types of potential memory on a BB: 1) application memory, the device memory) 2 and 3) Media/SD memory card

  Application memory - it is the most important; It is protected (not available to the user), dedicated and (fixed size) space as the destination for the installation of applications (more a few storage applications, overhead and other costs). You can't touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can install only here... There is no other choice.

  The device memory - it is space on your BB you can touch these files, images, media, etc. In general, it is not very big, but it is available.

  Memory card SD/Media - is what it says... your SD card to store files, media, photos, etc.. It can be as large as your BB OS can support... see this KB:
  http://www.BlackBerry.com/BTSC/KB05461

  On some devices/OS levels, enforcement and the memory of the device are combined into "free file"... This is, IMO, a little more difficult to administer that you can't see really how AppMemory you have. Nevertheless, here are some tips to use:
  http://www.BlackBerry.com/BTSC/KB15345
  http://www.BlackBerry.com/BTSC/KB14320
  http://www.BlackBerry.com/BTSC/KB14213

  Finally, it is always important to correctly close applications when you are finished with them. Using the back or on the red button won't do that - those leave the app to decide what to do... and some let themselves memory-resident, consumes resources on your BB, slowing down the overall performance. Rather, to close an application, press the BBKey and select 'Farm' or 'Quit'... that forces the application to be closed, freeing for your new use the resources it consumed. Some applications will always be running (in general - BBMessenger, browser, homescreen, phone and Messages)... but, you should always close them properly - especially the browser... If we leave on a web page, it will not consume only additional resources, but the power of the battery as well.

  Now, to your question about memory management and a reboot Batt-Pull simulated... There is indeed an application for the part... of the latter it is called QuickPull and it is available via AppWorld or directly from Steelhorn. I have the pro version and it works fine - except that he can't perform the reset if the device is locked with a password. But I can work around that. I restart my storm every night and allows me to stay in good shape... full batt-tire is a rare thing now (zero not... just rare).

  Regarding the management of files embedded... Indeed it is. Launch the Media application, but do not select any of the individual applications. Press the BBKey and select Explorer... you are now in the native file Explorer.

  See you soon!

  Good luck!

• How blackBerry Smartphones are registered with RIM bugs?

  I've seen several messages reminding people that it is a place of community support.

  Fine - then, how a long time BlackBerry user in fact save bug with RIM?

  If this forum is monitored and RIM take notes comments here?

  My main bug is - as I already posted NO supported applications.

  Said is unable to contact the update server... Sorry - but the turf - I want to manage my local applications - you assume I want to upgrade the operating system.

  Then...

  How to raise a bug and ask questions

  (1) is it because I'm in the United Kingdom?

  (2) is it because my BB is on O2 to the United Kingdom

  (3) is it because I use a 8900?

  (4) is it because I'm connected wireless to the Internet?

  It's the standard validation issues that I would task any Quality Assurance team with answering and use in investigating the issue.

  How can so - someone - I raise a bug with RIM?

  Because - to be honest - BusySync gave the facilities that I currently have with the DTM for Mac - sync contacts, better synchronization of calendar that I have seen with this DTM (why don't I still choose the mail on the BB calendar - I can choose that on the Mac!)

  I will try to update my OS - O2 do not seem to make the updates their forwarding sites for RIM and air...

  So - unless I'm using Windows (no thanks!) - I'm totally scuppered re: update of the OS...

  It's hard to be a citizen of class 3rd in this world of the 21st century!

  Thank you very much. I'll see if I can find more information on this... You have my email, so feel free to bug me anytime if you have any other problems.

  But for now, a weird to manage your applications is to disconnect from the Internet, so that BlackBerry Desktop Manager cannot detect the update for your 8900.

• Portege Z830 service - need battery monitoring on the March!

  At one point, I turned turned off/disabled the service that monitors the battery and indicates the State of charge.
  who warns you when below a certain level.

  I don't remember what I did.

  Does anyone know how to reactivate it?

  Hello

  Usually the easiest way to return of any change to the system is to use the Windows system restore
  Let's go to:
  + All programs - > Accessories-> System-> system restore tools +.

  Here, you would be able to restore unity to this early time.

  Also recommends checking the Youtube clip on + how to restore windows to a previous state using Windows System Restore.
  http://www.YouTube.com/watch?v=-8gRr83J0Sw

• T460: Battery-management-Bug in BIOS update 1.10?

  Hello

  A week ago, I've updated the BIOS of my Thinkpad T460 of 1.07 Version 1.10 and then some time later I noticed that from there on an internal battery pack was released before externally. Normally, it should be the other way around.

  At first, I couldn't imagine it has something to do with the new BIOS but today I installed the old Version 1.07 again once and now it works exactly as before the update and battery packs are unloaded in the right order.

  I have also heard Lenovo engineers and programmers read in this forum and so I decided to write about this problem here. It is perhaps possible to fix this bug in Version 1.10 with a new BIOS update.

  01/05/2016:

  Today, I installed the update again to see if it is a problem that appear each time and at the beginning it was fine, one internal was released in first then the external track. But when I started to load my thinkpad I noticed that now, right here, it's the other way round, so the external battery has been charged to the first and not internal, as would be normal. So I think it's really a T460 BIOS Version 1.10 bug affecting battery management.

  
  

• portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

  my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

  Hi Joseph,.

  Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

  How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

  The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

  I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

  Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

  I hope this helps.

  Good luck!

• BlackBerry, Blackberry Q10 Q10 OS10.2 update calendar

  Hello.

  Can someone please provide a timeline for when we go see the update OS10.2 in America for AT & T?

  Best regards

  Shawn

  Some additional information for your question can be found here:

  http://blogs.BlackBerry.com/2013/10/BlackBerry-10-2/

  Now, I also know that some operators will drive faster than others on the same continent...

  Good luck, should be published very soon

• BlackBerry Q10 Q10 - the battery life low, overheating, restarting the device.

  Hello

  My camera has been upgraded to 10.3 towards the end of February, I think.  Battery life was low at first, but eventually improved to an acceptable level.  (Acceptable = able to make it through the day without charge.)

  In recent days, the battery life was horrible.  At 01:00 this morning, it was fully charged and from 05:00, it's about 40%, without any use at all.  All idling with the screen off.

  I read some suggestions in the forums.  I deleted all my email accounts, restarted the unit, then added them.  I also confirmed that there are no other applications running that might be draining the battery.

  I bought the unit directly from BlackBerry back to November, so I have no support available carrier.

  So sometimes after typing a message, I hung up and he begins to restart.  I'm quite sure physical were issued with the phone - it is never dropped or roughed up somehow.

  When I look at my use of the battery, I see the remaining 38%.  System of 26%, and PIM services is 8.6%.

  Someone more detailed suggestions on how to fix this?

  Bryan.

  Hello and welcome to the BlackBerry support fourms!

  Try to veiw of the last 12 hours of the CPU usage. The heat is probably high CPU load.

  I also recommend that you recharge the device through BlackBerry link software. Good luck and keep me posted.

• BlackBerry completely exhausted Z10 battery does not load when 10 BlackBerry smartphone is connected to the charger or usb

  Hello

  I have a BB Z10, two days ago, while the travel battery got completely exhausted and the phone got turned off. later, I connected to the BB charger and the phone does not charge, I tried to connect it to the USB, but it does still not load... just a constant red light nod. I tried to remove the battery for 2 hours and back and not luck it is plugged. Like I need my phone works, I tried to go to a service center but not able to locate one on the BB site, I bought a new
  BB Z10 battery and it worked fine. I went back to my place and it took about an hour for me and yet once again, the battery discharged and I am with the same problem now. Now, when I connect my Z10 to the computer (windows 8.1) I get a red + green slow light flashing and after say 20 minutes, it connects to the computer and the phone turns... and when I see the phone it says Exiting battery saving mode"" immediately followed by "turning off the appliance" and it loops constantly. "

  Help, please!

  It's weird, but not the first time I heard of this.

  See this: http://www.blackberry.com/btsc/KB36747

• BlackBerry Z10 now the battery problem is irritating me...

  Now my z10 mobile BlackBerry that I bought one and half a month ago... is irritating me like anything. This phone is running at 50% of the battery... Please give me a solution for this problem...

  All the z10 stl100 1 users who face following problems listed
   
  1. mobile fires at any percentage of the battery for example 48% or 88%
  2. display 0% battery with flashing of the Red led mobile and mobile works normally
  3 status indicator giving different different percentages of battery level
  4. battery capacitor problem
   
   
  These are messages posted by different people on this forum actually pointing to the same question
   
  to resolve this problem when you think that your mobile battery indicator giving bad percentage simply turn off your mobile phone and remove the battery for more than 1 hour then re insert battery... There is no indicator problem more and your mobile will give % correct battery indicator.

• BlackBerry smartphone Curve 9360 battery

  Info on the device

  Your carrier:

  Smart phone BlackBerry 9360 (3G, Wi - Fi)

  7.0 bundle 1680 (v.7.0.0.353, platform 8.0.0.388)

  Apps and free space

  File for free before the removal of the battery: 135969061

  File for free after battery remove: 136850669

  Installed apps and their version:

  Bey2ollak - 0.0.8

  The system of blackBerry 7.0.0 software - 7.0.0

  BlackBerry App World - 2.1.4.13

  BlackBerry Maps - 6.1.0.24

  BlackBerry Messenger - 6.2.0.44

  BlackBerry Podcasts - 1.5.0.47

  BlackBerry Protect - 1.1.1.29

  BrickBreaker - 7.0.0

  Browser - 7.0.0

  Calculator - 7.0.0

  Calendar - 7.0.0

  CaptureIt - 1.4

  Clock - 7.0.0

  Contacts - 7.0.0

  Documents To Go - 3.0.0.115

  Email configuration app - 7.11.0726.1505

  Facebook - 3.0.0.17

  Explorer - 7.0.0

  Help - 4.0.0.12

  Homescreen - 7.0.0

  Media - 7.0.0

  Notepad - 7.0.0

  Messages - 7.0.0

  Options - 7.0.0

  Password Keeper - 7.0.0

  Password Lock - 7.0.0

  Phone - 7.0.0

  Installation - 7.0.0

  Social RSS - 2.0.0.39

  Tasks - 7.0.0

  Twitter - 3.0.0.24

  Voice dialing - 7.0.0

  WhatsApp - 2.7.6401

  World Mole - 7.0.0

  YouTube - 1.0.0.43

  Question

  I bought this unit on 29 February. A few days later, I noticed the battery was going from 100% to 0% in a few hours, so I went in the first week to change the battery and did this and he used to work fine until a few days where the battery goes from 100% to 0% in less than an hour ago. I do use the browser and twitter a lot, but I still think that the battery must remain more than that.

  Any ideas?

  
  

  Here are a few good tips for using battery that probably apply to you.

  http://www.BlackBerryFAQ.com/index.php/Maximum_Battery_Life
  And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...

• BB in blackBerry bold Smartphones 9790 battery life and temperature

  I used Blackberry curve 8520 and not been disappointed until the 9790 bold. Within 5 days, the reduced 1 day-hours battery life.

  It's even worse

  1 when the battery life is less 65% is greater than the demand for phone on battery, it of performance and the heat of the battery up to a scary point and die faster.

  2 less than 65% the phone take charge and no is not controllable and crashed constantly.

  will you please reply as soon as possible because I'm afraid something will happen to me because of the temperature of the phone. I just bought the phone 5 days ago and I can't give it back to the supplier as I bought the UNITED Arab Emirates and now I am in Egypt

  There is obviously something weird going on inside your phone.

  Let's start with a battery pull.  Something in your operating system does not work correctly if a battery pull he must solve.  Remove the battery while your phone is on, then replace it.

  If that does not improve the performance of your phone, it might be a good idea to reload the OS of your phone using BlackBerry Desktop Software.  You don't even have to load a new OS, sometimes just reload the same OS makes the turn.

  Try these suggestions and post back with your results.