Cleaning of Windows install on Lenovo Edge

Similar Questions

• Clean windows installed, can not synchronize

  I just clean windows installed (from 10 to 8 1). Then, I downloaded firefox, signed and sync, but nothing happened.
  I'm sure that's not old sync (firefox says that my version is up-to-date)

  Pure install FF from the given site:
  https://www.Mozilla.org/en-us/Firefox/new/

  and for ALL the query related sync, please visit:
  https://support.Mozilla.org/en-us/products/Firefox/sync

• Error in installing Windows XP in Lenovo G560

  Hello

  I use lenovo G560 with Windows 7. Now I don't want to use it. So I decided to install Windows XP as normally in desktop computers I used desktop computers only.

  Boot from the CD and windows Set started with loading files... in the Middle, it stops showing the Blue Screen of Death , I'm not sure about why you came.

  Please suggest how to install Windows XP to replace windows 7 in lenovo G560

  When you see the lenovo logo, press f2 to load bios, on the configuration tab, change the sata mode selection settings, save and exit.

  to burn discs of recovery, check the user manuals.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Try to install Topaz Denoise and Topaz Clean, getting the error "cannot access the windows service install. "This can happen if windows install is not properly installed.

  This problem arises when clean installing topaz denoise and "Topaz". I tried the fixes in this article http://support.microsoft.com/kb/2642495 and none of them seem to work. This problem arises when clean installing topaz denoise and "Topaz". I tried to install other programs, and the error does not appear anything else. I also restarted my computer, any advice on how to solve this problem would be appreciated.

  Original title: the windows service install are not accessible. This can happen if windows install is not properly installed. Ask your assistance technical assistance

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot, try to install the programs and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Method 2:

  I suggest to try the methods mentioned in the following article and check the status of the issue.

  How to solve the problems when you install or uninstall programs on a Windows computer.

  http://support.Microsoft.com/kb/2438651

• HP 250 G4: Clean Windows install 10?

  I am eager to clean W10 to install on my new laptop.

  There will be problems with the HP drivers at all? With my previous two Acers, W10 Gets the drivers automatically.

  In addition, this means that I can never use the HP device will support the wizard again to check my warranty, or it may cause problems with warranty?

  Thank you

  Yes, wifi and BT will be under network and you need each... even with chipset... it will be the actual chipset driver and then a few pilots with as maybe usb 3.0... you say your usb ports are all black inside... all must it the SS lightning software then it? This is another indicator of usb 3. Basically, you need a driver with each title and take the one with the most recent release date.

• [Lenovo Edge 11] Disorder of the migration of a HDD to SSD

  Good evening everyone,

  I currently own a Lenovo Edge 11 "Intel, that I wanted to spend by exchanging the HARD drive-slow down-stock nine DSS and I'm stuck when I try to restore the image from a USB key.

  This stick contains the recovery image made with the ThinkVantage recovery media in the ThinkVantage Toolbox.

  First point: I did not abandon car stock data, it is still able to boot the system.

  Second point: I installed the SSD drive, plugged my USB with the recovery image, press F12 and chose this... and nothing, just a message "error loading system.

  I thought that my recovery image can contain something wrong (although I have follow-up Assistant and left ticked both boxes check to create a bootable disc and copy music Q :), I mounted at the back of the hard drive and tried to make a system image.) But the utility boot me as he tells me that I already have my recovery image.

  What should I do now? Thank you for your advice.

  Concerning

  Hi people!

  Finally, I can deal with my migration from the HARD drive to my new SSD. Given that I bought a few quality brand blank DVD again (something that I did not long ), I could re - issued a new set of recovery DVDs (all three, the trunk and the two required for the score).

  In fact, it loads its content on the SSD.

  So far, here's what I did:

  0) back the stock hard drive inside the laptop and the old windows startup

  (1) reset the file done.ini to be able to re-launch the process of creation of recovery media

  (2) mount the SSD in an external case and start a portable Flash DRIVE containing my Ubuntu distro

  (3) launches gparded and get rid of linux partitions I did on the SSD, so all the space is stayed "unallocated".

  4) start on recovery media

  (5) allow the system to restore the computer as he should have done with the first attempt on a USB key.

  What I keep as a lesson to all that is:

  (1) DVD are more reliable than the issuance of a USB drive as a recovery unit. Perhaps the process has been modified and improved.

  (2) Lenovo could save time user and give directly the recovery media. Come on, 3 DVDs are not that expensive, Asus even do!

  Thank you guys for your support and advice. .

• Unrecognized works drivers and windows install on and on

  Dear Toshiba

  I need some advice and help on some problems with my laptop Toshiba Satellite L550D windows 7 (updated with windows 7 I have purchesed on your part).

  I searched on several Forums (forum of toshiba responses, Microsoft MSDN Web site), but I still have a few problems, and I do not hesitate to ask for help in this way.

  Question 1: My laptop does not recognize some drivers, and it happens as follows: I check in the Device Manager, device system, ATI i/o communications processor smbus controller, shows message: "no drivers are installed for this device. When I chek 'pilot' message: ' no file necessary drivers or embarked for this device.

  When I tried to update driver, there is automatically a message that this driver is up to date and in 'Browse my computer for driver software' we goes to the location of the driver file, and then select the driver to install, the installation of the driver, then "windows has successfully updated the driver software", has finished installing the driver for the software (see above the IO... ATI).

  After that, I downloaded all the drivers available from the Toshiba site yesterday for my OS and my product and the situation is the same, it shows NO file necessary drivers or have been loaded for this device.

  The same situation is with other equipment, as follows: timer event 2) precision, 3) numeric data processor, controller 4) programmable interrput, 5) speakers, 1 memory access controller) direct, clock system 6).

  Question 2: There is also another problem, that some downloaded drivers can be installed, as follows:

  (a) software modem of toshiba 2.2.97 (SM 2297ALDO4), message: you want to allow this program to make changes... ? I click 'Yes', but nothing happens.

  (b) parts of modem select Driver utility, it appears the message "cannot find the support device.

  (c) Mobility Center tiles pilot and driver DVD player, touch pad driver synaptics, for only three drivers there is no Install Shield Wizard on the screen, and installation does not start.

  (4) Toshiba vallue added package 1.2.25, message shows, 'Try to prepare InstallShield wizard', then 'another version of this product is already installed, installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove programs from the control panel. {FEDD27A0-B306-45EF-BF58-B527406B42C8}.

  I tried to uninstall Toshiba value added package, but it shows that Error 1612 the installation source for this product is not available. Verify that the source exists and that you can access.

  I also noticed that the existing version on my laptop is 1.2.28 (of the 06.01.2010) and this downloaded version (that cannot be installed) is 1.1.1.4.

  Question No. 3: above all that, every time I have start or restart Windows 7, it displays the message 'windows install installation preparation', short-term, then disappears, (I collapsed, then activated and restarted Windows install) and the error is not resolved.

  How to remedy?

  Thank you

  I have after reading your long post m really to wonder: what do you do?
  DERA Jelena I installed Win7 Toshiba upgrades and clean install Win7 on more than 10 different Toshiba notebooks and didn t have a problem except the feature FN keys on an old Satellite A200.

  Anyway, when you upgrade pre-installed Vista notebook with original Toshiba upgrade kit you need to just follow the instructions you have with her. Instead of the first composite (drivers) drive and it will be your system and you inform that drivers must be removed from the system before the start of the Win7 update. When the drivers and some tools from Toshiba is deleted, you must use second upgrade for Win7 upgrade disk.
  After doing this put the first disk again and check for the installation of compatible drivers.

  That is so easy to do and I don't really understand what is happening with your laptop. After reading your ad I think you've done the installation of own OS and not an upgrade. What did you do exactly? I mean after upgrade cannot be so conflicts of hardware in Device Manager.

• my computer can't find the path for windows install what I do to get it back

  whenever I restart my computer, a box appears saying: it can not find the path for windows install and the box comes back to how to fix this

  Hi Billy,

  Try a clean boot (Vista and W7) http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once don't forget to reset your system back to the normal state, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work. If you are using XP, see http://support.microsoft.com/kb/310353 and http://support.microsoft.com/kb/316434.

  I hope this helps.

  Good luck!

• Windows install doesn't work or is not installed properly how to fix?

  I have Windows xp proff. Windows install worked and it stopped working after some time I can not do the automatic updates and can not install some things, I tried many programs and none of them can help me. Someone at - it an answer for my problem?

  Hi Kathleen,.

  Thanks for joining Microsoft Community.

  According to the description provided, looks like you're not able to install updates or programs such as the Windows Installer does not work.

  I have a few steps, I should help you solve this problem.

  Method 1:

  Try the steps mentioned in this link and check:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Error message "Could access the Windows Installer Service" when you install a program in Windows XP

  http://support.Microsoft.com/kb/315353

  Method 2:

  Try these steps and check

  Let us scan SFC and check if there are any file system corruption.

  1 put the Windows XP CD in the CD-ROM.

  2. click on 'Quit' if the auto-menu appears.

  3. click on 'Start', then click on 'run '.

  4. Type "SFC/scannow" (without the quotes) in the "Open" box, then click on 'OK '.

  Note: There is a space between "SFC" and "/ Scannow".

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3:

  Run a virus scanner and check:

  Virus is known to cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Problem with the service Windows install

  Window error message: windows Installer service could not be accessd.
  This can happen if you use the window in safe mode,
  or if windows install is not installed correctly.

  Cannot download antivirus. Run software free reg clean and found registry 7556 errors.
  Internet AVG could not load because of the problems in windows xp.
  Severity: error
  Error code: 0xC0070643
  Error message: internal error.
  MSI engine: failed to initialize the package.

  My concern is what when they ask the product key that is not on the CD I

  [I've waited for this shoe to drop.  [Good luck, Elizabeth, it is all up to you.]

• I found c:\windows\install\winolf.exe, what is it?

  original title: c:\windows\install\winolf.exe

  I find c:\windows\install\winolf.exe. What is a microsft exe or spy software? This file is re-created after I delete it. Help, please

  Hi vinojkumar,
   

  An analysis online on your computer for cleaning any type of virus/spyware:

  Check out the links given below to do the same thing:

  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Microsoft Security Essentials

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• service Windows install not about services.msc

  Running Vista Home premium, SP2, 32-bit o/s and receive messages of "update failed". I checked the permissions DCOM, has given full control to the SYSTEM account, checked registry permissions.  When I went to check the properties of the Windows Installer service, I found that WINDOWS INSTALLER did NOT appear on the list!

  Problem was recognized during scheduled updates were fails with the error 80070641 Code 641.  I tried to download WINDOWS INSTALLER 4.5, but all the versions for VISTA failed with "not intended for this machine" messages, I tried.  Help!  I can't uninstall even without this module.  Thank you.

  Hello

  
   
  1. What is the full error message and the error code?
  2 did you do any change on the computer before this problem?
  
   
  Try the following and see if it helps.
  
   
  Method 1:
  Unregister and register the Windows Setup program again
  a. click on Start Orb, in the search box of start, type MSIEXEC /Unregister. and then click OK.
  b. Click Start Orb, in the search box of start, type MSIEXEC/REGSERVER, and then click OK. After you run this command, the operation is complete.
  c. now restart the computer and check if that helps.
  
   
  Method 2:
  Make a file system checker and check if it helps.
  To run a SFC scan, follow the steps described in the following Microsoft article.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833

  Method 3:

  Reinstall Windows install

  a. Click Start, click Run, type cmd in the Open box and then click OK.
  b. type cd % windir%\system32, and then press ENTER.
  c. Type attrib - r s h dllcache and then press ENTER.
  d. type ren msi.dll msi.old, and then press ENTER.
  e. type ren msiexec.exe msiexec.old and then press ENTER.
  f. type ren msihnd.dll msihnd.old, and then press ENTER.
  g. Type exit and press ENTER.
  h. at the command prompt, type exit and press ENTER.
  i. click on start and then click on stop computer or Shut Down.
  j. Select the reboot option, and then click OK or click on restart.
  k. Journal on the computer.
  a. download and install the latest version of Windows Installer. For more information about how to obtain Windows Installer, click on the number below to view the article in the Microsoft Knowledge Base:
  893803 Windows Installer 3.1 v2 (3.1.4000.2435) is available
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8483
  Mr., click Start and then click on stop computer or Shut Down.
  n. Select the reboot option and then click OK, or click on restart and check if it helps.

  
  Note:
  
  Also follow steps under Windows Installer issues in the following Microsoft article.
  Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651#reso1
   

  Method 4:

  How to fix MSI software update registration corruption issues: http://support.microsoft.com/kb/971187

  
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
   
  
  Method 5:
  
  Try disabling third-party security software and programs can test the question.
  
  Step 1:
  How to solve the problem by running the clean boot in Windows Vista: http://support.microsoft.com/kb/929135 
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.
  
  Step 2:
  Disable security software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software
  Note: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 6:
  

  Reset Windows update components, and then check if it helps.
  How to reset the Windows Update components? : http://support.microsoft.com/kb/971058
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
  
  
  Method 7:
  Download and install the Windows update manually and check if it helps

• Uninstalled Microsoft office XP Professional with Frontpage, since then I get Windows Installer Windows pop up. Y at - it a fix for Windows install stop this.

  Uninstalled Microsoft office XP Professional with Frontpage, since then I get Windows Installer Windows pop up.  Y at - it a fix for Windows install stop this.

  You are in the habit of using "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. ( CCleaner Registry Cleaner) ?