Click on TouchPad does not work properly

Similar Questions

• Satellite L50D-B - TouchPad does not work properly

  My TouchPad is not working properly, it stops working after a few seconds after the start. Can someone help me?

  To be honest, it is not easy help these problems.
  What exactly happens? Touchpad is completely off? I want to say is there any kind of reaction?

  Have you tried to turn again using the F5 button?

• Satellite Pro C50-A-153 - Touchpad does not work properly

  First, sorry for my bad English.

  I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

  Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

  It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

  Can someone help me with this?

  Thank you.

  On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

  How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

  Check it out.

• Satellite A200 - touchpad does not work properly

  Recently bought a computer laptop a200 toshbiba of second hand and the touch pad for the frist week or two worked very well.
  And then began to get hard to use, as lethargic, now it wont even move at all.

  I reformatted computer and who did not.
  So I think the touchpad itself may have disappeared?

  Any suggestions and if yes, how would a new touchpad?

  see you soon
  mast

  Hello

  You mean that the touchpad no longer works?
  Have you used the Toshiba Recovery disk to recover the device?

  You use the latest version of the BIOS?
  Please check this and if the latest BIOS if available, please update this

  Well, it could also be a hardware problem
  And in this case, the touch pad needs to be replaced

  It is delicate and must be done by an ASP (partner) in your country

  PS: the touchpad can be ordered as a local ASP.

• Suddenly, IncrediMail does not work properly. When you click on an email that internet Explorer tried to open

  Original title: corruption of the probably the key ".htm" registry is damaged or missing

  Suddenly, IncrediMail does not work properly.  I click on the message and get nowhere.  It seems that it is trying to go to IE and can not find the web page.  I searched everywhere on the internet and saw where others had the same problem, but I can't find the fix.  One person suggested it be referred to Microsoft as a "failed to open local html file with IE' problem."  I guess maybe that's a problem with the registry, but do not know how to fix it.

  I can not even do a system restore or reinstall the IncrediMail program.

  For assistance please ask for help in the IncrediMail Forum

  IncrediMail Support Portal:
  http://www.IncrediMail.com/English/help/choose-your-version.aspx

  Directly in contact with the IncrediMail support team, click here

  Cordially,

• Satellite L50-B-211 - Touchpad does not work

  Hi I have a question

  We just bought a Satellite L50-B-211, but the touchpad is not working properly.
  Move the pointer autour is no problem, but the buttons do not work.

  Using the buttons does nothing, left or right clicking has no effect?
  If I want to get the properties of a file right-clicking does not work?
  (two fingers press work)

  The hardware is correctly installed, there is no problem in the configuration of the device.

  Do I have to return the device (before installing our software / config the device to our needs)
  or is this a software bug?

  According to specification for laptop, your laptop was supplied with Win8.1 pre-installed so that all the necessary drivers are installed and all hardware should work fine.

  Try please check all the touchpad settings and check if changing the settings has positive effect.
  What you can try to do is to reinstall the original recovery image and test once more with the factory settings. If the result will be the same, I recommend you to contact your dealer as soon as possible and explain the situation. Ask if you can get the new machine.

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Mat * one years (uj-840) DVD player does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
  Check it out!

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Carpet * a DVD - RAM in Sat M55-325 drive does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0
  I have RecordNow from Sonic/Roxio which is preinstalled on the computer.

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  Hello

  Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 Microsoft

  I had similar problem. The ODD (optical disc drive) did not appear in Windows Explorer. Method 1 from this page solved the problem. Please try the same thing and let me know if ODD working again.

• Synaptics touchpad is not working properly on the Satellite A100-635

  My synaptics touchpad is not working properly my mouse works very well but does not work in every corner of the touchpad for special functions.

  I tried to set it up again but it had no result, also I downloaded a new driver, but it had no results to. My buttons multimedia keys like play/pause or stop are not no longer works.

  These buttons/keys stopped working at the same time as the touchpad. Checked with NOD 32 pro virus and spyware with ZA pro ==> no results.

  Who can help me with this problem?

  Hi Jarno

  Do you know how many different Satellite notebooks have a series? Drivers and tools are not the same for each of them. Because of this you should also tell us that you have.

  According to your description, I can tell you: install OS using support and recovery delivered with factory settings, your mobile phone must be configured correctly.

• Satellite C850 - internal MIC does not work properly

  my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please

  You must mark the internal mic as the default device.
  This can be done in its tab → click right on internal mic to record and choose the default device

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Re: HP laptop touchpad does not work after uninstall of kaspersky anti-virus (version of windows 7 32)

  Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?

  Hello

  Try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with Networking" and press ENTER.  When it has loaded, download driver Synaptics following, and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe

  Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.

  When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.

  Kind regards

  DP - K