Clientless SSL DNS error
Hello
I have configured without SSL client and I can't make the bookmarks to work. I created 2 bookmarks (mail.yahoo.com and www.gmail.com), but they are dimmed. The default DNS server associated with the connection profile group has 2 servers and the ASA is able to resolve the names of the bookmarks in the CLI.
With the same configuration I also use AnyConnect Client mobility with lots of Tunneling and customers are able to solve using the dns servers configured on ASA.
The ASA is 9.1 version 2. Before I had 8.4 (5) and had the same problem.
Is there anyone who has experienced the same thing and found a solution?
Thank you
Razvan
Is it possible to fix the configuration.
Tags: Cisco Security
Similar Questions
-
Homepage of vpn clientless ssl after login problem
Hi all
I have a problem with my vpn without customer portal.
I need to configure when a user connects via the portal, something that works very well, it ends up on the home page.
At the present time there ends up immediately on the anyconnect button.
With the home page, I say the first button that says 'home '.
Users should be able to click on "Web Applications", hereinafter 'House '.
Under 'Web Applications' users must have their button aswell "Anyconnect".
First of all, I wasn't able to make the portal "Anyconnect" button display in the menu.
Then after awhile, I realized that when dynamic access policy says "Unchanged" on the page "access method".
When you change this setting "Client Anyconnect" portal no yard is no longer, I find myself immediately at the start of the anyconnect client.
When you select 'Portal' get the page of the portal, but the menu anyconnect is missing.
When you select 'Time-by default-portal' I get the anyconnect button and all the other menus, which is good.
But I hold the home button to be the default.
And not the anyconnect, after login button immediately you get the anyconnect start page.
And then finally and most importantly, when you select 'Time-by default-Anyconnect' you login to the Web portal, anyconnect begins immediately in the menu.
Something we want the end user to manually (click on "Start Anyconnect") I mean!
I'm sure that DAP which forces because of the options above.
But what selection unchanged or anything that does not include Anyconnect, then the anyconnect button went...
I don't know what I can do to change that.
Am I missing something?
I would say that DAP is not necessary, but when I put everything in the DAP default by default, then the anyconnect button went into the menu...
Kind regards
Robin
Here is my configuration:
attributes of Group Policy GP_company_intranet_portal
value x.x.x.x WINS server
value x.x.x.x DNS server
Protocol-tunnel-VPN-client ssl clientless ssl
Split-tunnel-policy tunnelall
company.local value by default-field
value of IPP_SSLVPN01 address pools
WebVPN
the value of the URL - list BML_company_intranet_portal
Disable http proxy
AnyConnect Dungeon-Installer installed
AnyConnect ask to activate default webvpn
value of customization CO_company_intranet_portal
gzip http-comp
hidden actions no
activate ActiveX-relay
disable file entry
exploration of the disable files
disable the input URL
disable the auto-signon chip-tunnel
type tunnel-group TG_company_portal_localauth remote access
tunnel-group TG_company_portal_localauth webvpn-attributes
personalization CO_company_intranet_portal
allow group-url https://portal.company.be
xxxxxxxxxx of encrypted password 0 privilege testaccount user name
attributes of testaccount user name
VPN-group-policy GP_company_intranet_portal
Protocol-tunnel-VPN-client ssl clientless ssl
disable the password-storage
value of group-lock TG_company_portal_localauth
type of remote access service
Troubleshooting when you are connected to, just to check if the right group strategy is used:
FW-company # display webvpn vpn-sessiondb
Session type: WebVPN
User name: testaccount index: 510
Public IP address: x.x.x.x
Protocol: without customer
License: AnyConnect Premium
Encryption: 3DES hash: SHA1
TX Bytes: bytes 114897 Rx: 16087
Group Policy: GP_company_intranet_portal
Tunnel of Group: TG_company_portal_localauth
Connect time: 14:50:56 GMT + 2 Thursday, October 25, 2012
Time: 0 h: 00 m: 03 s
Inactivity: 0 h: 00 m: 00s
Result of the NAC: unknown
Map VLANS: VLAN n/a: no
Hi Robin,
You can try:
1. Please remove / disable the rules of RAP and keep only one by default with the default action and parameters (continue). This is to exclude the DAPs as the primary cause.
2 - GP_company_intranet_portal group policy attributes
WebVPN
AnyConnect ask no webvpn default
Let me know how it goes.
HTH.
Portu.
Please note all useful posts
-
(Browser) clientless SSL VPN access is not allowed.
I'm trying to set up an additional Anyconnect vpn profile. I have one that is working properly but this news will not. When I try to log in to download the client or try to connect with a computer that already has the customer I can not.
The client side receives this error: "access (Browser) Clientless SSL VPN is not allowed."
On the ASA journal:
4 May 10, 2010 11:42:17 722050 group
user <> IP <10.12.x.x>Session is over: SVC is not enabled for the user
4 May 10, 2010 11:42:17 group 113019 =, Username =, IP = 0.0.0.0, disconnected Session. Session type:, time: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: unknownHe does reference the main our ipsec connection group name. I think it's very strange. Here's the part of my config that treats the ssl client.
tunnel-group type SSL - RDP remote access only
tunnel-group SSL-RDP-Only general attributes
address pool SSL_VPN_Users
authentication-server-group FUN-LDAP
Group Policy - by default-SSL-RDP
tunnel-group SSL-RDP-Only webvpn-attributes
enable VPN_FUN group-alias
allow group-url https://64.244.9.X/VPN_FUNinternal SSL - RDP group strategy
attributes of SSL - RDP group policy
value of VPN-filter RDP_only
VPN-tunnel-Protocol svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list RDPonlyVPN_splitTunnelAcl
WebVPN
list of URLS no
SVC request no svc default
Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
Comment by RDP_only-.x RDP access list
RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
Comment by RDP_only-.x RDP access list
RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
Comment by RDP_only-.x RDP access list
RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389mask of local pool SSL_VPN_Users 10.12.20.1 - 10.12.20.100 IP 255.255.255.255
Post edited by: kyle.southerland
After reviewing the config, the difference between groups Anyconnect and SSL-RDP-Only is the AAA server.
AnyConnect group uses the radius for authentication (RAS01) server, while the SSL-RDP-Only group uses an LDAP server for authentication (FUN-LDAP), and the configuration of the FUN-LDAP server, you configure the mapping of LDAP attributes, which is to map the group "An1meR0xs".
To test, change authentication LDAP aaa RADIUS for the newly created group.
Hope that helps.
10.12.x.x> -
Why am I messages DNS error since upgrading to El Capitan?
Since I upgraded my OS to El Capitan I was making (Yahoo Search page) DNS error pages when I use an Internet link to leave my email to another site. Its pretty boring and I have to use Safari where it happens. I like FireFox, but if I can't solve this problem I will be forced to stop using it. Help, please. Thank you, Michael.
You might have installed something more. On Mac, this problem is associated with some extensions Spigot, especially one named Searchme.
Open the page modules using either:
- CMD + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. Then on the side right, remove or disable Searchme - and anything else that you don't need, like all the other Spigot/MyBrowserBar extensions. Keep in mind that all extensions are optional and none is included with Firefox when you get it first.
Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.
Is that what helps you regain control?
This could be the tip of an iceberg of malware. When you install free software, you often get the options grouped under silence. I don't know the best way to 'clean up' a Mac of these elements, but you may want to consider the issue.
-
Why I redirected to a Yahoo DNS error page whenever an ad fails to load in a Web site?
Yahoo Solution DNS error handler
https://search.yahoo.com/yhs/errorhandler?hspart=gt & hsimp = yhse-gt & q =(URL of the page I wanted)
Search query
We found results because SafeSearch is active and that your request contains certain words limited. Try the suggestions below or enter a new query above.
To search, change your SafeSearch preferences.This started recently popping up when I insert a few news sites. It seems to load the article, and then an ad arrives and fact that the redirection page to this error handler. Yahoo isn't even my default search. I can usually click on the back button and get the site I wanted to, but it is extremely annoying and I don't know what causes it.
Hi boriszcat, the details of your Question > System Details more shows that you are infected with the extension of Searchme.
Open the page modules using either:
- CMD + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. Then on the side right, remove or disable Searchme - and anything else that you need not, like the other 3 extensions of Spigot/MyBrowserBar. Keep in mind that all extensions are optional and none is included with Firefox when you get it first.
Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.
Is that what helps you regain control?
This could be the tip of an iceberg of malware. When you install free software, you often get the options grouped under silence. I don't know the best way to 'clean up' a Mac of these elements, but you may want to consider the issue.
-
Updated ReadyNAS 316 OS, returned with the DNS error
I've recently updated as well to my NAS 6.5.2 devices and since doing so, the VA started sending notifications, update attempts failed. When I investigated further, I discovered that none of the functions of the update seems to work. For example, when I click to search for updates to the NAS operating system rather than show 6.6.0 or tell me there is no update he insteads returns a DNS error. My network has not changed in any other respect. 2 devices still sync with eachother and all my users can still access their data in the two places for the more basic functions appear to be not affected. I have manually updated them to 6.6.0 OS but the OS DNS error update remains on this device. I noticed that at some point the AV definitions that update before the manual up-to-date operating system and now it seems to work (for the moment) very well. However, as I have already said, the error remains the update of the OS. Rather than report the status update I get a DNS error.
Thoughts anyone?
A friend today got the same problem after the update of the firmware.
Try turning off IPv6 support on your network interfaces.
It has resolved the issue.
-
Reset my router & get a DNS error?
Why do keep losing the connection to the internet and have too keep resetting my router & get a DNS error?
Hello
-What is the exact error message that you receive?-What is the operating system installed on your computer?-Did you do changes on the computer before this problem?Method 1: Run the network troubleshooter utility.
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2: Try to reset it TCP/IP and check.
http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
For reference:Hope this information helps. -
changed «sharing data...» ', looked already several answers... all other laptops (4) adapted for the new router & modem with no problems...
When you run the network diagnostics I can connect to the internet once, but trying to follow the link or open the second window provides DNS error and kill the connection.last error now from network diagnostics is error 0x5b4 to query the server DNS 192.168.1.1; DNS not found, not a home user scenario...any other idea?Hello
You did changes to the computer before the show?
Please follow the steps mentioned in the link below.
-
Internet page cannot be displayed/cannot can not find server or DNS error
I have a new hard drive and cannot connect to the Internet (page cannot be displayed error / cannot find server or DNS error). Operating system XP and Internet Explorer v6. I tried without success to create a new network connection. The only network connection listed is a 1394 connection. Under Options, LAN settings is set to automatic detection. The firewall is disabled.
Hello Barbrab
You must install the network drivers for this system that you did a clean install of windows. After installing the driver, find the network connection. Let me know if it helps.
-
Original title: error 107
Anyone know how to fix this error? Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error
I'm unable to open Yahoo Messenger or email.
Hello
1. don't you make changes to your computer before the problem?
2. is the relevant question for Yahoo Messenger and Email only?I suggest that you follow these steps and check if the problem persists.
Step 1:
Test the issue in safe mode with network.
Step 2:
If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.
Note: Don't forget to restart your computer as usual.l.
Step 3:
Problem can be linked to a malware infection, I would have you download, install and run Microsoft Safety Scanner and check if the problem persists.
-
E4200 and WDTV live via wifi without DNS error?
Someone does it, I mean EVERYONE, got a WDTV live hub to successfully connect to the E4200 via wifi without getting a DNS error?
My system:
E4200, fw c. 2.1.39.145204
WDTV Live Hum, fw c. 3.08.14
DWA-160 (Rev.) (A) usb wifi dongle fw v. 1.80
My sony wifi equipped blueray connected to the E4200 without boredom and access the USB HDD connected to the E4200.
Any help, suggestions, comments are welcome.
-
Can not get on the net via wifi apt, dns error msg
Howdy, hey i cant get on the net with any browser through my wifi apt. I can very well with any other wifi in the range but my wifi apt has the best signal. I get a msg of DNS server and tried everything that the computer recommended to fix. Why this only happen with wifi at my complex?
SteveAustin71,
Thank you for visiting the Microsoft Answers community forum.When you say that your wifi apt, it's your own personal network or provided by a complex of apartments for the residents? Is that what you must pay for, or is it a free hot spot? What is you get the exact error message? If it's your personal network in your own apartment, what type of router is and is it secure? If it is fixed, what kind of security it uses? Answers to these questions will help us better diagnose your problem and propose solutions.
DNS errors can mean different things, depending on what is the exact error message, but generally means that your computer does not have the DNS information from the router or server that is supposed to provide the IP address, gateway and DNS information on the computer when you log on.
Let us know the answers to these questions so that we can better help you.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Connection PS3 (DNS error)
I cannot connect my ps3 to my Wireless Linksys WRT160N router. The router does not have a version type, so I guess it's version 1.0?
Whenever I try to connect my ps3 I get a DNS error (80710102) of the playstation. I tried to use the automatic settings and manual settings. My laptop connects fine, but my PS3 doesn't even bother. During the settings auto, he will not even get an IP address, but when I entered this manually, it worked. However, I had no luck with typing manually DNS settings. It fails every time. Help, please!
Thank you
James
First of all every time that you assign a static Ip address to your PS2, the IP address must be different from your computer, if you enter the same IP address, and then due to IP address conflict, it will make your Deivce work offline.
Check the settings of your router wireless? It can be due to a higher level of security on your router. Connect to the router configuration page and click on the Wireless tab, and then click the sub-tab under wireless "Wireless Security" and below, change the Security Mode 'WPA discover' and under 'Passpharase' enter your password and click on save settings... "
Now on your PS3, first remove the static IP address and then look for the wireless network and then trying to connect to it. Once connected to the wireless network your PS3 should be able to go online.
-
When I first bought a PS3, I needed a router to access the internet for my PC and my PS3. It worked fine for several months and then one day, that my router is no longer me connected to the internet. Currently I am connected to the internet directly from my modem which means that it is not my ISP that has the problem. When I connect the router it says that there is some sort of DNS error. Help?
What is the model of the router?
Are you on the computer or on the... PS3 DNS error ?
On the computer, click on start > all programs > Accessories > guest... A black box will appear (command prompt)... In the command prompt window type ipconfig and press "Enter"... Look for Ethernet adapter Local Area Connection address IP, subnet mask, and default gateway... IP address must be 192.168.1.x, subnet mask: 255.255.255.0 default gateway: 192.168.1.1 (assuming that your router is 192.168.1.1)...
If you get mentioned above IP address, a subnet and address the gateway then you ping the gateway, type ping 192.168.1.1 and press ENTER... If she gives you ask has expired, and then disable any firewall, the security software on the computer...
If you get 4 replies then type ping 4.2.2.2 and press ENTER, if you get the request exceeded, then you must update the firmware on your router... If you get 4 replies then type ping yahoo.com and press ENTER... If you get answers from Yahoo, then you should get the Internet after adjusting the browser settings...
Setting of the browser settings: open an IE, click on tools > Internet Options, and then delete all files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...
If yahoo expires, provide static DNS on your connection to the local network...
Click the Start button > settings > Panel > Network Connections - right click on Local area connection icon and go to properties On the "Général" tab, select "TCP/IP Internet Protocol" and click on the properties button - select "Use the following DNS parameters" DNS preferred 192.168.1.1 DNS auxiliary - 4.2.2.2 > Click on the button Ok to save and click on 'Close' in the main window of properties... You should be able to go online...
-
DNS error when you try to access the link online
I have been using a link on my site of doctors for centuries to order a prescription (it uses elbowspace) when I tried to order today I received the follwing message' Oops! This link seems broken. DNS error occurred. Server not found "." I contacted the surgery and they tell me that there is no problem. I can access my other sites OK. Any suggestions as to why this has happened?
Hello
Are you using a 3rd party firewall or anti-spyware?
This is most probably the site causes the error, but you can try to reset your TCP/IP stack.
Start command - in the search box type-
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
For a few months (end of 2015) Firefox returned an error of "secure connection failed" when I try to access my account at a major insurance. The site worked fine in Firefox for years and works very well with Microsoft Edge, but I prefer to use Firefo
-
Portege R830 - screen problems
HI -. I need some advice.You just bought a R830-138. Must say - I'm not too impressed with it so far [had a M300 before which was great - and it is about emerge I would like some advice on. When powered on battery or sector - and when the screen brig
-
New keyboard on Satellite L500 - 19 X does not work correctly
Hello About a month ago, I spilled pepsi on my laptop and had sent for repair. I came home today and he had a new keyboard installed, among other things. But the new keyboard does not work properly. A bunch of key type is close to letters instead. Fo
-
Used to install Service Pack 1 for Vista
I get to the point if I download the sp1, it starts the installation. It goes all the way up to step 3, and then he tells me after a very long time that service Pack 1 installs recovery of changes. Wondering what to do.
-
Hello! I can use some help to configure my linksys EA3500 for my new ISP. My original ISP had a simple modem only had a port of the plugged into the internet port on the linksys router, did not provide for DHCP, none of that. It was just a modem. The