Clip + stuck in cooling media mode

Similar Questions

• My iPod is stuck in Recovery/DFU mode

  My iPod is stuck in recovery/DFU mode. He is stuck with the apple logo and a progress bar which is of about 1/20 of the way along. If I connect it to my computer it does not appear in iTunes or in my computer. If I try to restart of Force as suggested in this article:https://support.apple.com/en-gb/HT201263 , then it will display the logo of low battery. If I connect it to my computer, it loads and goes back to being stuck with an Apple logo and a progress bar. Any ideas on how I can fix this?

  While similar DFU mode and recovery mode are different. Try the other method and then try to rebuild through iiTunes

  Try DFU mode, then restore to factory settings / new iPod via iTunes

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  Recovery mode

  Next

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• 'Cool Down Mode' a 'threat of application?

  I have a Motorola Backflip that I updated to 2.1 - update1 awhile back. A few weeks ago, I installed Webroot Security for Android 1.6.13.296. He currently has 125 game definition. (I use Webroot Spy Sweeper on my PC for several years without problem).

  I did a scan a couple of days and Webroot reported a 'threat of Application' called 'Cool Down Mode '. He wants me to 'remove' the threat.

  I googled "Cool Down Mode" and it seems that it is an integrated application included with the phone. If it is actually a virus, I'm happy to remove it, but if it's an integrated application used to prevent overheating on my phone I think I want to keep.

  I went to Webroot backup and questioned on this subject. They told me to post a question on their forum. I haven't done it yet, I thought I'd ask the experts phone first.

  Is 'Cool Down Mode' a threat? Will there be an Android virus called that?

  Thanks in advance.

  I went on the Support Forum of community Webroot and was informed that my version of Webroot Security for Android (1.6.13.296) was not common. I've updated to version 1.8.15.640, always with the definition set 125, and the problem is solved.

  "Cool Down Mode" is not a threat of enforcement. It is integrated in the operating system kernel in the factory and cannot be deleted.

• MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

  My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

  Hello rad trp,.

  Thank you for using communities Support from Apple!

  From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

  I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  See you soon!

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• locks up PC / gets stuck in standby/hibernation mode

  I clubhouse of compaq with preinstalled windows vista that I bought the pc in September 2008 when I fist got the pc he would be stuck in standby/hibernation mode when I pressed on the moon shaped button or when I let it just fall asleep on his own. I went back to the futureshop in my period of 2 weeks buyers and they interlaced monitor as would the tower should green light that he was always on but monitor would remain off until I unplugged the pc from the wall (button / stop does not work)

  now almost 2 years later July 2010 I have problems with Explorer does not or anything like that to with the internet, even my network sharing Center wouldn't load so I took it with future shop service plan and they found some viruses but removal did not work, so they have restored and now I have new sleep problems and they advised me that it can't be fixed. I have disabled the sleep on the keyboard button, but left the pilot light. the technicians reported that they turned off and now it will not (duh!) they told me that I just have to live without it no idea what can help?

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Try to reset the default power Plan settings. information is at the link above.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  And how to solve problems in Standby Mode is at the link above.

  And read the information of 'Related links', too.

  See you soon.

  Mick Murphy - Microsoft partner

• M177fw: Cool-Down Mode problem with m177fw

  Hello

  I'm in big trouble

  just bought m177fw today and printed only 30 outs. Since after I'm get 'printing... '. Cooling mode error ".

  Please help me what I have to do

  Thank you

  I just put the printer under the ceiling fan. IT IS EVERYTHING!

  Yet sometimes when I print more than 50-60 prints in<5 minutes.="" printer="" goes="" to="" cool="" down="" mode="" and="" i="" have="" to="" increase="" the="" fan="" speed="" and="" turn="" the="" printer="" off="" till="" 30minutes="" than="" again="" it="" works="">

  Overall, I recommend this product for SMEs, but not big companies.

  Thank you

• Computer is stuck in selective startup mode

  My computer is stuck in selective startup mode. I had a problem of reinstallation of office 2010 after a fraudulent copy was downloaded by crooks who hijacked me for a secure Ms page and took me for $ 50 is not the problem. I have a MS software warranty, so I had a technician help me with office and got it works, but I'm stuck in this restricted mode and need help to return to the normal mode. Bootrec/ect... did not work it says no found windows system or corrupt files load all the drivers which is not available in selective mode. Please help as this is getting frustrating that I can't work with the applications minimum programs ect... If nobody answered, then this guarantee will be useful ;)

  Original title: the System Configuration

  Hello

  Long term, that could actually be better... Especially after the publication of office...

  You will lose all your programs except those provided with windows...

  You cannot save those install you, but remember to back up all your important data and other things...

  Just in case...

  You could study later get an imaging program that you are running from a CD...

  Make an Image to an external HARD disk... If something happens then windows, simply reload the image and make it like new... MUCH easier then reinstall...

• Sansa Clip - stuck on the refresh database... I don't know how go you to the SMC is stuck on the refresh database...

  Hey guys,.

  I had to look around the forum without result...

  Have a new Sansa Clib 4 GB... Spend 2 hours sorting of a list of synchronization... (Who has no record on a playlist... )

  Put on I "Refresh database" at about 20%, which is frozen right there...

  I've read about the opening in MSC? to find the bad file which is the cause (correct me if I'm wrong)

  But can't figure out how to do something that he is stuck on the refresh database...

  Through 60 GB of music earlier and really don't want what should once again!

  Please help, not very good techno animal

  Thank you

  PAM

  Go into the menu settings of clips and then use the system settings internal to format the drive (sorry it will delete all the music on the player). Once that is completed, make sure that you have the latest firmwire. Then download mp3tag (google it) and use it to check the tags of all your files, make sure that they are all Id3 tags, and that there is no mistake on any of them (sorry, this can take some time). Then, make sure that the clip is in MSC mode. Then use windows Explorer to drag and drop the files you want onto the clip on the clip. Disconnect and then turn it on. Leave it to update the database (do not touch anything). If you have music you know to be protected DRM you will need to plug the "rocket" back in and use Windows Media or any other similar program to add these files. I hope this gets you going.

• HP Envy 4502: HP Envy 4502 printer is stuck in "shutting down" mode. Second time this has happened.

  My printer is stuck in a "shutting down" mode and has been so for 2 days.  This is the second time that this has happened.   I hope someone can help with this.  The power button flashes.

  Thank you!  Thank you!  Thank you!  It worked!

• printer is stuck in "shutting down mode.

  Printer stuck in ' printer shutting down "mode, will not be closed."

  I would suggest resetting the printer as follows: unplug the power cord from the printer.  Wait a minute, then plug the printer back in and turn on the printer.  The printer is correctly initialized?

• clip + on several occasions "Media update".

  For some reason any my card 4 GB clip + w/8 GB can jump in a cycle where for every button pressed the media refreshing process starts again. I also have a 4GB clip and even can't, so the presence of the card is being questioned.  Similar defects? All solutions?

  This problem has been resolved by placing a call to Sansa Tech. Help.  Finished I had to reformat the system.  Sacrificed the air memory internal, but could easily replace. So, solved by Sansa!

• S2415H, stuck in power save mode

  I have the same problem with a S2415H screen I bought only 1 week ago. He always crossed the power save mode prior to entry. Now he's stuck in this mode. I tried the sequence here twice, but when I turn on it immediately goes into power save mode. Any suggestions please?

  Run the self test
  * Disable S2415H and computer
  * Unplug the cables VGA or HDMI, the power cable and audio cable from the S2415H
  * Wait a minute
  * Only connect the power cable to the S2415H
  * Turn on the S2415H. You should see one of them =.

  

  Run the built-in Diagnostics
  * Disable S2415H
  * Press and hold the 1 and 4 button on the front panel simultaneously for two seconds
  * A gray screen appears
  * Press button 4, once again on the front panel
  * A red screen
  * Press button 4, once again on the front panel
  * A green screen
  * Press button 4, once again on the front panel
  * A blue screen appears
  * Press button 4, once again on the front panel
  * A black screen appears
  * Press button 4, once again on the front panel
  * A white screen
  * Press button 4, once again on the front panel
  * A text screen

  If these test pass, the monitor works. The question is the computer or video card.

  * Disable S2415H
  * Connect a cable from the computer to the S2415H (either VGA or HDMI, but not both)
  * Turn on the computer, then the S2415H

• magnifying glass stuck on the snap, mode what do I do? (iam using aero themes)

  using the IAM missing and I can not use any mode other than rooted... iam using aero themes and every time I open the Magnifier bar under loses its transparensy

  Hello khalidosman,

  I disable the magnifying glass and then see if you can reset it so it is not stuck in docked mode.

  Click the Start button.
  Select all programs
  Click on accessories
  Click ease of access Center

  Then click on "make the computer easier to use. This opens up many options. Uncheck "turn on Magnifier." Click OK.

  It should detach your magnifying glass.
  If you use Aero, you should get only the option for mode full screen and lens Mode.

  I hope this helps.

  Marilyn

• Collection of Microsoft solitaire spider stuck in a suit mode, cannot change for 2 costumes

  I was so frustrated with Windows 8, I got my new computer to Best Buy.  They didn't have computers that they could sell me other than Mac which had nothing else but Windows 8.   They sold me their Geek Squad package, restore my computer to its original state.  Reinstalled my software.  So today, I downloaded the game applications Microsoft Solitaire Collection.  I had the same game with the same problems as before.  Stuck in the mode of a suit, never gives me an option to change costumes 2 or 4.   Does not show my stats I used in the 2 pressurized suits.  Must have something to with xbox live, which I'm not interested.  I want to just relax with the spider that I play for years.

  Hi Rosie,
   
  We are happy to help you with the problem on Microsoft Community.
   
  It seems that you have a hard time playing on game Solitaire from Microsoft that you can not change the number of suites in the game.
   
  We understand the inconvenience that you face, but we will work together and try to solve the problem.
   
  You can change the suites lone Microsoft easily by accessing its parameters.
  You can follow the steps below to do so:
  (a) open the Microsoft's Solitaire game.
  (b) press Windows and c together key to open the charms bar on the right side of the window.
  (c) click the settings option.
  (d) click game options.
  (e) alter the number of suites by selecting the required number.
   
  It will be useful.
   
  Please email us if there are unresolved.