Clock problem

Similar Questions

• MIDI clock problem

  I'm having a problem with sending the Midi out of Logic Pro X clock. It seems that every time I have connect my computer to my audio interface and open a new project (or old), I have to go into preferences and project settings for the Midi sync and restore 'Destination' under ' passed to ' to do things correctly implemented. Is there a way to set a default value? Thank you.

  Yes... Create a new project... Configure everything as you wish... and then save it as a template via the file menu

  Now, you can use this template with everything you want, set up the way you like it... When you start a new project...

• LM3S8962: SPI clock problem

  Hello

  I'm working on a project using the star LM3S8962 evaluation kit and a 4-channel analog digital converter 24-bit Texas Instruments ADS1274EVM.

  I want to get the data sent by the ADC with the LM3S8962 using the SPI bus.

  I have all of the example provided by the following link for my case: http://decibel.ni.com/content/docs/DOC-7701

  The ADS1274EVM provides 2 pins for SPI communication: DOUT1 and SCLK.

  When it becomes a clock on the SCLK pin, it starts to send data via DOUT1 pin, there is no pin slave select.

  If I'm right, I don't have to connect:

  -PIN SSICLK for the LM3S8962 with SCLK of the ADS1274EVM pin

  -PIN SSIRX for the LM3S8962 with the pin of the ADS1274EVM DOUT1.

  The ADS1274EVM is powered independently of the LM3S8962, so I connect VA WINE GND as shown on the http://decibel.ni.com/content/docs/DOC-7701page.

  I write because it does not work: the ADS1274EVM sends no data given that I cannot get a clock signal of the SSICLK of the LM3S8962 pin that allows the ADS1274EVM start the conversion

  I think that him 'ARM of SPI create Configuration reference VI' configures a clock that is sent through the LM3S8962 SSICLK pin, but it does not work as expected.

  Can someone help me please? Thank you

  Luke Y.

  Hi Luke,.

  I just tested the example and had no problem generating a clock on SSICLK.

  I join the project I did with LV 2009 SP1. I hope that you could test and tell us if it works.

  Kind regards

• derived clock problem?

  I am tring to derive a clock to 25 MHz using an NI PXI-7842R and labview project will not allow exact clock

  But when I try to do the same thing for a PXI-7830R target, I'm successful.

  What is going on?

  I choose a base of 40 MHz clock

  for 25 MHz, the multiplier is 5 and the divisor is 8

  When I right click on the clock of new derivatives, I get only the possibility to enter a new frequency of the clock.

  Why doesn't the tool let me simply specify the multiplier and divisor?

  I'm using Labview version 2010

  That should work just fine.  The structure of the case will add some overhead to the total runtime of the circuit, but at 50 MHz, these costs should be minimal and you should not encounter many problems of timing.

• Pavilion dv6 2170 clock problem after replacing the CMOS battery

  Hello world. Sorry for my bad likely English

  OK, so the problem started since I changed my laptop CMOS battery. and to be honest it wasn't whit any problem the clock when I replaced it but I if this may be the cause of another problem that later I figuered what the problem was because of the RAM.

  in any case, I changed the Rams and this problem has been resolved. I just set the clock of the BIOS and rebooted the system. After awhile I figuered that windows clock is not fair. I restarted again and saw the BIOS clock. It has been reset for 2009! even when the laptop battery and power supply are attached the BIOS and windows continues to change clock! I even changed my windows and I replaced the CMOS battery with the former, but nothing helped. It seems really strange, but I don't think it's maybe a hardware problem there a driver or something for the CMOS battery... need your help! Thank you!

  You mentioned that the BIOS has been reset for 2009? This means that there is a problem with the current or any leak and the BIOS has been "reset" back at the root of the plant. I'm afraid you have shorted something when you changed the battery not be grounded.

  Worst case is that there is physical damage to your motherboard and there is nothing you can do about it, probably broken a capacitor - who cannot hold a charge to prevent the reset of the BIOS clock.

  However, you can try this.

  Completely, unplug your computer, remove the laptop battery, etc... Then browse 'Guide' your computer for the "hard physical reset" for your CMOS. I don't know what it's like on a laptop, I only did it on desktop with riders. Be sure to follow the directions precisely.

  -Make sure you are properly grounded. touch the metal parts that is grouned before touching anything on your computer.
  -the hard reset should be done for at least 30 seconds, this ensures that the power is completely served the system. Then you can set this back.

  Try this a couple of times, first without removing the CMOS battery and 2nd time after remove CMOS battery and placing it in.

  Good luck.

  BTW, you can also try running without your new memories (if there is more than 1 stick, try them separately). In fact, I would probably try first before doing a hard reset CMOS. The reason why I didn't say earlier, it's because I have assumed that you already tried this.

• Alarm clock problem

  If there is a problem with the alarm clock since 4.4.4 updated and it's still in 5.0.2. When I try to clangw, sound alarm clocks it opens Commander file stock not his! 4.4.4 usually after phone restart everything has worked for awhile, but now in 5.0.2 is not fixing problem. Any ideas how can I get in stock clocks sounds? Or mount it at all?

  You could erase the default values for applications in the settings-applications-all.

• BlackBerry Smartphones Spinning clock problem

  Here, I had a problem relates to a spinning clock that always appears when I lock the keyboard.

  When I bought the first of all, it was not.

  I thought that may be due to some applications that I installed, but I have not installed these heavy applications. My 9700 memory is always around 88 mb. and I uninstalled for some of them.

  I just did a battery pull, but still it does not get rid of the spinning clock

  Your memory active cleaning? Turn it off, you do not need.

  Options > Security > advanced > garbage collection

• After 1.4 update clock problem

  Hello

  I am a user of Palm Pre Telcel (Mexico) and I have problems with the clock on my device since the 1.4 update.

  It is always 1 or 2 minutes before every day.

  Someone knows how to fix this?

  I have network disabled time...

  Thank you!

  I replied to your other post for this problem, we try not to cross-post here, thanks.

  TreoAide

• Skype clock problems

  Hi all. I use the latest version of Skype and is now, for some reason, running three hours behind my computer clock. [Ex; my computer say 11:00 and Skype will say that the message is sent at 08:00.]

  I get messages the same way. My friend will answer to something I said, and it will appear under mine, but also say that he has been sent three hours before. Essentially, Skype works fine it's just wildly incorrect time display. I followed a suggestion here and checked that Skype has been set on time - my computer is it. So I'm not entirely sure what's going on.

  Does anyone have a solution?

  ZephyrNocte wrote:
  

  That's what is said about the time: line TZ;

  * Time: TZ: UTC - 7, Server: 1461004250, Local: 1461015051

  This translates to:

  Server time: Monday, April 18, 2016 18:30:50 GMT

  Local time: Monday, April 18, 2016 21:30:51 GMT

  This means that the time on your computer is set to a wrong time zone.

  https://community.Skype.com/T5/Windows-desktop-client/chat-time-is-all-wrong/m-p/4334829/highlight/t...

  You must set the correct time zone on your computer.

  http://www.SevenForums.com/tutorials/944-time-zone-change.html

• HP pavillion a6720y clock problem

  The time on my HP Pavilion a6720y desktop PC display is seriously wasting time.

  I think I need to replace the internal battery, but I'm not sure if us a solution. Also, not sure where to find the battery once I find.

  Standard button battery is a CR2032.

      

• Why my computer clock will keep at the right time?

  Would it be a virus or something wrong with my computer?

  Hello Marchellleekins,

  I've added a few links below where others have this problem. Please let us know status.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/my-PCs-clock-and-date-always-change-when-i-switch/c0eb39ac-8c4f-4ad4-8BF8-776eba4d22ed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/clock-problem-in-Vista-always-shows-future-time/f0144281-E717-4fde-861D-576c3e950a34

  Thank you

  James

• 17R3 I7-6820HK MORE PROBLEM

  Hello

  My AW17R3 has a cpu over clock problem.

  I was used to 7months there is more fashion clock LV3. (temp of loading full 71' c, 161' F) no screen Bule.

  yesterday, I found that the processor works on 3.6 Ghz, so I got a LV1 OC choices in the BIOS

  but cpu clock still 3.6 LV2 LV3, all the same clock 3.6

  re-installed win 10 & BIOS update but same 3.6

  What should I do?  call support technique dell?

  uninstall 'Intel (r) platform thermal and dynamic framework.

  re-installed old version. now the clock cpu 4.0

• My battery percentage is not accurate, I will let it charge all night, I wake up and it's on 80 so so I cut my phone to make it precise. Also my alarm clocks do not go to sea, and it's starting to be a problem.

  I need a solution to my battery unaccurate percentage and help with my alarm clocks that they leave mounting

  Hi there alara11,

  It seems that your phone battery does not charge, and your alarms do not seem to jump when you value. We should be able to solve that with troubleshooting software, so I would like to start by leaving the clock app and the settings:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you did this force restart the unit with the Home and Sleep/Wake buttons as described in the following article and test questions again:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559
   
  I don't think that, but if the problem persists, save your device in iTunes, then restore it like new and verify that it works.
   
  How to clear your iOS device and then set up as a new device or restore from backups
  https://support.Apple.com/en-us/HT204686

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Thank you for using communities of Apple Support, let us know how it goes!

• Problem of drift incredibly strange clock in Windows 8 on ENVY 14 t-1000

  I have a ridiculously strange and frustrating issue running Windows 8 x 64 (RTM) on my Envy 14 t-1000.
  
  The first time I noticed this problem was when I ran the consumer Windows 8 build preview earlier in the year. I noticed that my clock might drift off-sync, usually at least a few hours, often more than a day (always drifted backward in time). I would sync it using 'Internet time' in the options of time & Date but it would soon become off once again in a few minutes.
  
  Thinking it was a dead CMOS battery, I disconnected the battery and checked, but it read full voltage. I then did a clean install of Windows 7, no problems whatsoever. That lasted a few months.
  
  I recently did a clean install of the final version of Windows 8. Exactly the same thing is happening now.
  
  All this experience? Is there a particular driver should I install? An incompatibility permanent with Windows 8 on this machine?

  Hi chambo622,
  
  Take a look at this document and let me know if the steps help solve your problem.

• Problem with DAQmx Schedule VI (sample clock)

  Hello to you all,.

  I'm new to this forum, please bare with me. I have some experience with LV, but I am relatively new to data acquisition projects. I use LV2009.

  I want to make sure that I use the hardware timing (instead of software distribution) in my project so I followed some of the threads here as sugested to use DAQmx Schedule VI. The problem is that no matter how I set the system I get the same error-200300 invalid calendar
  type.

  The project is simple. I encode with 1000 pulses per
  Rev and it is mounted on a shaft of a turbine water goes thru. I'm watching the frequency
  and so the rotation of the shaft which tells me that the amount of water flows through the turbine. In the end, there will be 2 channels
  by every encoder and ~ 3 encoders (turbines) total and calibrated the main meter that will give me constant impulses and all encoders will be compared to this master frequency.

  I'll use PCI6602 DAQ, but
  now, for the development, I use USB6221. Let's say that the
  frequency is between 500 Hz and 10 kHz. What I am doing wrong? Or maybe better to ask - what would be the right approach for this project?

  Thank you

  Marty

  Hi Marty,

  It seems that your question is already answered here, but Jason is correct that the 6221 neither the 6602 support a clock sampling for frequency measurements.

  As Jason mentioned, your best bet is also likely set the mode of synchronization for "implied". This means that the frequency value is sampled at the end of each period of your input signal. In addition, a solution that is clocked by the software (On-Demand) might be acceptable.

  X Series DAQ devices allow an external sample clock to use for frequency measures (described in the Manual of X series). Frequency of sample-clocked measures are useful in very specific
  circumstances, but it does not seem that you need this feature based on what you've described so far.

  (621 x) bus-powered M series can also be configured to use an external sample as the X series clock but do you not have the same features described in the manual of the X series.

  I hope this helps!

  -John