clone of the EBS & metalink notes upgrade

Similar Questions

• I need a version 3.0 - ish of Firefox which is used on a registration site the webmaster has not upgraded and debugged the site to be compatible with Firefox 4.

  The site

  https://Fourwinds.com/OCF/login.php

  only works with Firefox as browser. The webmaster does not have upgraded and debugging for use with Firefox 4. I'm hoping to find a copy of the version 3.0 - ish to be able to access this web site. Any suggestions?

  You can get Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html

  If it's just for a site, an alternative is to keep Firefox 4 but install the portable version of the earlier version of Firefox on your hard drive. You can get http://portableapps.com/apps/internet/firefox_portable - section version inherited at the bottom of this page contains links to older versions of Firefox.

• Linked clone failed: the operation is not supported on the object

  Hi all - I would appreciate help on a related clone operation that is a failure.

  I use Quest vWorkspace to create linked clone VM in my environment.  It integrates with virtual Center and creates from a VM snapshot parent according to normal related clones.  It has just stopped working and I am trying to track down the cause.  The task fails with the error message in the console of VMware vCenter: the operation is not supported on the object.

  The vCentre is 5.5 and esxi.  vWorkspace is v8.0 MR1.  The parent VM is located on an iSCSI datastore.  I tried to put the clones of destination on premises and warehouses of NFS data with the same result.  Unfortunately I can't (don't want really to) move the VM parent from the data store that I have of many VM related to this virtual machine.

  The failure message is a bit generic, so I looked on through the vmkernel.log and vpxa.log and it is an excerpt from the vpxa.log whereby it shows failed task 153.  Can someone please indicate something in the newspaper that had to be examined or another newspaper to look at?

  vWorkspace attached error and below:

  Linked clone has not CreateLinkedClone_Task of CloneVmLinked failed! Task of VMware CreateLinkedClone_Task status error - the operation is not supported on the object. -Call stacks-VmLinkedClone.VmLinkedCloneService.CloneVmLinked String vmInvPath, String strSnapshotMor, String strNewVmName, String strSysprep, ManagedObjectReference morFolder, ManagedObjectReference morResPool, ManagedObjectReference morHost, String strDatastoreName, Boolean bQuickPrep, String domainNameIP, String

  See attachments

  Thank you very much
  Wikus

  Additional accessories:

  • 
    Untitled picture.png

  Hello guys,.

  For those of you already on 5.5, I did a few tests these days. I did find a magic bullet yet as a single parameter that is sure to break but I came up with a workaround.

  I found that if my ESXi server was still on the 5.1, vWorkspace could deploy clones linked via vCenter 5.5 - it's only when the ESXi is also on 5.5 that you have a problem.

  If any of you have ESXi hosts still on 5.1, you can deploy there for now.

  In ESXi 5.x, it is easy to have an ESXi virtual machine. You might want to consider creating some virtual boxes ESXi to deploy on while the vworkspace dev team look at why it does not work.

  I know that this is not the best solution in the world, but it's better than no work around

  Thank you, Andrew.

• Don't download the CS5 updates (not upgrade)

  I bought a new MacBook Pro and installed CS5. But when I update the programs of more creative it gives me 'there was an error downloading this update. Exit and try again later. "for each program.

  When I click on the customer support link, it takes me to a page on upgrades and who need a serial number valid. I have a serial number valid because the programs installed. I erased my old MacBook Pro so my serial number is not used in this regard.

  I saw a discussion mentioned here change security preferences to "allow app downloads from: anywhere." So I tried, but it still gives me the error.

  It also only allows me to install Adobe Acrobat 9 Pro. But with this program it just will not fully open and install when I double click on it. He's going to question what plug-ins you want and then nothing, just has Acrobat in the menu bar, but you can not click on this.

  I tried the suggestion I saw off the Creative Suite and try to install Acrobat, but that did not work.

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

  The forum has not been hacked, but the scammers will use the messaging system to send false messages

  Adobe uses NO Skype, so please post her here Adobe identification code, so it can be reported and banned

• How to convert Date months in the database that points to the EBS, DWH not.

  Hi friends,
  
  We intend to create reports in OBIEE and the Source is EBS. This means that we do not want depends on Datawarehouse and Informatica and OBIApps. Simply create us some reports and that they refer to the EBS database.
  
  End of test, we took an HR report and it contains under columns:
  
  Months (Sun)
  Revenue by Division (Fact)
  Average cost per numbers of workforce (Fact)
  
  In my little survey, we found that the income column is of EBS: GL_BALANCES. And we have configured the base of W_Day_D table in DAC has no column months in EBS (not sure).
  
  Come to my problem, how can I call the month column in my data base stressed EBS. How to convert the Date months in my database.
  
  I can deceive me, but someone please look into this... How can I create columns for this exact report of OBI in EBS database instead of DwH.
  
  Thanks in advance...
  
  Raghu Jen7782

  Just confused here.

  Hang on, if I get it, you want to create report based on columns of EBS directly then using rt BI applications?

  There is then no question of using the W_DAY_D table then.

  Follow

  As long as you have Date column, you can use DB functions to convert them into months (just use the string SUBSTR to extract the month and the year).
  Create your own query instead of using the tables of BI APPS and try to bring a hybrid product.

  Sorry I'm wrong in the understanding of your needs, if I had properly then do the steps above.

  Mark correct or useful if this can help,

  Kind regards
  Rayan Vieira

• Deliver in clone of the EBS R12 on Vmware machine on the same server

  Hi Experts,
  
  To clone an EBS r12 DB for Vmware machine that are running on the same server which is RHEL 6 64 bit OS platform.
  
  EBS r12 software needs to be installed on the vmware machine prior to EBS r12 DB can be clone on it?
  
  Can we clone EBS r12 database by restoring fair EBS DB files or through rman on the vmware that has just installed RHEL 6.
  
  Please suggest what are the means or how EBS r12 DB can be the clone of Vmware server which is not installed software EBS r12 have? What is the best.
  
  
  Thank you!!

  971054 wrote:
  We have installed all the pre - req RPMS under Linux x 86-64 [761566.1 ID]

  Could you please elaborate a bit more on how we could use rman to clone an EBS db to vmware.
  Since vmware is not have ebs or in this case installed oracle software.

  If we use the quick clone IE when we can run the adpreclone on the source applications & level db or more specifically
  How we could run the adcfgclone on the target since it is not have installed software ebs. Could you please develop.

  Thank you!
  Priya

  You must copy all applications and files nodes of level database from the source to the target servers-this is already explained/mentioned in the documents mentioned above.

  Thank you
  Hussein

• Messages in the Sierra have not upgraded

  I upgraded to Sierra and my messages app have not improved. It's always the old version with all the names of the contact of my conversations replaced with their phone numbers. If I try and type a name to add a contact on a new message, the application crashes.

  When I look at the modification date of the application in the application folder says 'may 7, 2012', so that all my other wealthy apps goes back to the year underway (2016). I tried to reinstall Sierra again without change.

  Please let me know if anyone knows how to solve this problem.

  Thank you!

  Save a backup copy of your Messages application on a USB key, and then delete the Messages from your Applications folder on your Mac. He may request a username/password admin name. Don't forget to empty the trash after that. Then, try to reinstall the Sierra again and see if that does not copy the new Messages on your Mac application. If something goes wrong, you always have your initial request of Messages and can be replaced from the flash drive.

• Questions about the displacement of 4.0 to 4.1 (move to the new facility, not upgrade)

  We have an existing installation of VMWare with blades 11 HP running VSphere and VCenter.  Everything works 4.0 with SQL 2005 Standard installed locally on the VCenter server.  We have the blades in a cluster with HA active and have made some "adjustments" on the alerts and configuration, but installation is pretty basic.  We have only 5 members of staff who come in the VCenter system and really only two "primary" VMWare administrators

  We seek to upgrade to 4.1.  I've been watching the steps we would need to back up the database, restore it on x 64 machine, installing VCenter, upgrade the database, etc..

  What I thought was that since our installation is very simple, instead of "redevelopment" of our VCenter, what about just install a new VCenter & SQL Server, and then manually delete each blade in the old VCenter and add it to the news.

  One of the advantages I can see for this is that we would go to a nice, clean configuration and the database.  Our system was installed about 1-1/2 years ago when we first bought ESX 3.5.  Since then, we have done several updates, software patches, VMWare and Microsoft, configuration changes, etc.  We are new to VMWare at this time there, so we made various changes to the configuration that we have learned.

  What I found on the net, we can extract a knife of the 'old' VCenter and then just add it to the new VCenter 4.1 without interrupting the VM running on this blade, is this correct?  When the blade is added to the new VCenter, it will automatically add all virtual machines to the new VCenter inventory?

  Another question I have is licensing.  We currently have our existing VCenter Server VMWare VCenter licenses.  Same license key can be installed on the new VCenter system while they are still active on the existing VCenter?

  If not, can we install the new VCenter and migrate the blades using the trial licenses, then after moving the last blade, remove the old VCenter licenses and install them on the new VCenter?

  After we get everything on the VCenter 4.1, we will then go back and reinstall VSphere 4.1 on each blade.

  Am I missing something?

  Your comments would be appreciated.

  Mike O'Donnell

  Should be good to do this way. Disable HA and DRS - disconnect the old vcenter - attach to the new. In the end, run ESX update process.

  You can test the move with a few virtual machines. Once HA and DRS disabled, evacuate sensitive VMs of the host that you want to test and move it.

  Good luck!

  Franck

• Version of the tools do not upgrade

  I just used update of VMware Infrastructure to upgrade a stand-alone ESXI server to 3.5.0 158874 and then restarted. All the virtual machines that I said the Tools version is now obsolete. When I try to upgrade the tools, nothing happens. The tools to remain at the current version being 3.5.0 143129. I uninstalled the tools and tried a fresh install and it still installs version 143129.

  I ran the update of VMware Infrastructure to see if there was an update of the tools and it is said the system is up-to-date. Any ideas of what I should do here?

  I saw a similar thing, where the installation of tools has been constantly U3 version.  I had to run manually upgrade executable tools updated to update 4.

  -KjB

  VMware vExpert

• all the Manager are not open after clone r12.1

  Hi expert,

  I have clone of database on a new server from prod. database is in place, the application is in place for the backend. When demand de./adstrtall.sh all services are normally don't start no error/warning back. but when I check the Manager

  ps - ef | grep FNDLIBR

  He returned only 5 lines that show all the Manager are not started. and one thing more when I access the PC customer request the application is not open.

  Please suggest me what I can do to check any type of error.

  I check all the quick logfile clone basic data and application but not found any type of error.

  AutoConfig successfully completed level database and application.

  OS - rhel 5.7 (test server)

  EBS r12.1

  OS - rhel 5.3 (prod server)

  Thanks and greetings

  pritesh Rodriguez

  the question is sloved by the following steps.

  1. in my case, the firewall is turned on then I m unable to access ebs application in the browser. so turn off the firewall on the server.

  2. in the-> simultaneous set I check every manager and change the host name of the server test (instead of host name of server prod). After eating this all is implemented successfully and works very well...

  Thank you & best regards

  pritesh Rodriguez

• Role of PLSQL developer in the process of upgrading the EBS?

  Hello

  One client is currently in the process of upgrading of the EBS from V11 to V12. They are looking for a PL/SQL Developer, migrate their paintings of previous version again. What would be the role of a pl/sql developer in such situation? I want to ask that position and looking for documents related to the post but could not find one. If there is someone who had experience with this migration scenario please help me.

  Thank you

  Siva.

  PLSQL developer should be involved in the code changes between 11i and R12 - please see these links/docs.

  Changes to model data identification between 12.1.3 EBS and EBS prior releases

  https://blogs.Oracle.com/stevenChan/entry/ebs_data_model_1213

  Report of comparison data EBS model [ID 1290886.1]

  Comparison of EBS seed data reports now available

  https://blogs.Oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports

  eTRM

  http://ETRM.Oracle.com

  Thank you

  Hussein

• the ebs 11.5.10.2 to 12.1.3 on IBM AIX 64 upgrade

  Hi experts,
  
  We have ebs 11.5.10.2 currently, simple installation (db levels and applications on the same node) node
  We intend to upgrade to the latest version 12.1.3 on 11.2.0.3.0 RDBMS.
  
  I need your help for the following queries;
  -is it possible to configure the ebs (levels of db and apps) using RAC (only available to 2 nodes, each node must hold levels db and apps?)
  -What is the required minimum nodes if I deploy on my ebs environment rac?
  
  could you please help me with the docs needed to deploy a successful upgrade?
  
  Thank you.

  the current environment of EBS is IBM AIX 64 single node installation.
  the new topology must include 2 nodes with IBM AIX 64 > holding the DB as RAC level
  and the application layer should be migrated to Linux 64.

  In this case, you do not need to migrate the database and you just need to use a different OS for application-level nodes.

  the measures on the current node,
  1 - upgrade 9.2.6 to 9.2.8 DB layer
  9.2.8 to 11.2.0.3 DB layer 2 - upgrade
  3 - passage of the application layer, of 11.5.10.2 to 12.1.1
  4 - crossing the 12.1.1 to 12.1.3 App

  Sounds good.

  I will later propose the db for oracle RAC on a new nodes with the same IBM AIX 64 platform diffenet
  5 - Install the grid and the db on the new nodes
  6 - import the Pb of the old node upgraded to the cars db

  I still need to read good to find the best way to go through a successful upgrade.

  Once you upgrade 11i to 11.2.0.3 data base, lay the R12 software on new Linux machines and complete the 12.1.1 upgrade. Then upgrade to 12.1.3 release. Once you are finished with the upgrade of the application migrate the database of unique to the RAC node.

  Thank you
  Hussein

• Will be the Apple Support IOS still 9.3.5 on my ipad 2 even if it will not upgrade to IOS 10?

  Issues related to the:

  Will be the Apple Support IOS still 9.3.5 on my ipad 2 even if it will not upgrade to IOS 10?

  9.3.5 IOS is still safe?

  Please answer ins a few hours of

  iPads that will stay on iOS 9.3.5 will still run and be fine and app developers will publish app updates should still be compatible with iOS 9 for, probably, a year, or almost.

  Maybe a little of everything and more.

  Even in this case, regardless of apps that is updated will still continue to work.

  IPad 2 will be just fine.

  Do not worry.

• Pencil of the Apple and Notes App upgrade

  iOS version 9.3.4

  iPad 12.9 pro

  Please can someone advise what application is advertised in the attached picture. It is not the stock notes application. Is - this application notes upgrade? If this is the case, can someone tell me how to get this app (pictured below)

  I tried the service customer (no idea), I reset my iPad several types and time to get the opinion of upgrade (waste of time)... not the upgrade option should be in the notes app... No. option is to say if the app has been improved... (which doesn't seem to be the case... because the painting tools are rare... see second photo)

  try to get to

  

  what I have now

  

  P

  Have you tried the search in the App Store?

• After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.

  After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
  Mac OS X 10.7.1
  Firefox 6.0.2
  Flash 10.3.183.7

  The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.

  1. Closing of Firefox
  2. Launch the Finder and open the Applications folder
  3. Make a right click or Ctrl-click the icon of Firefox.app
  4. Select "Get Info."
  5. Select or deselect the option "open in 32-bit mode".
  6. Close window "Firefox Info"
  7. Restart Firefox