close computer.

Similar Questions

• Y410P cover with Do Nothing Option close, computer laptop Goes CRAZY (opens programs randomly)

  Just got my phone today. I play with her, but I found a problem obvious and unpleasant. If I can not ge this fix I must return.

  I have the opportunity to "do nothing" when the lid is closed. However, I discovered that the laptop opens just randomly files/programs/applications. I have the laptop sitting on my table. It's not squealing or repositioning. Is it due to poor planning on this laptop? The laptop isn't even a touchscreen when what happens?

  Hi anon09,.

  Welcome to the Forums.

  There is unusual activity on your computer. You can try to:

  1. press Fn + F6 to disable the touch pad and try to re-create the problem (if it works, the touchpad is probably the one that opens apps - try to set the sensitivity by going to control panel > mouse.) There should be a tab device settings or MOMENTUM to set the sensitivity.

  2. if same problem, try to re - create the problem in Safe Mode. If everything works well, perform a clean boot and test (this action temporarily disables startup programs which is most likely causing the problem).

  Let me know your findings,

  neokenchi

• External USB HDD PX1269E - 1 50 cannot be recognized on computer

  Hello

  I recently bought an external hard drive, Toshiba 500 GB external USB Hard Drive PX1269E - 1 50 I want to use it on my Pentium 4 3.6 ghz memory 1 GB 400 GB internal hard drive and motherboard ASUS P4P800.
  I installed Windows XP Profesional SP2 on this PC.

  We have 4 pc at home and he answered on any of this.
  The next problem is that after I pluged in the USB 2.0 conector, nothing happens? In the close computer store, I asked the seller to try it on one of their computers and the seller pluged it in one of the laptops and my external hard drive has responded immediately!

  After the test to the computer store, we have purchased a pci usb 2.0 card because we thought it was the problem of usb, but after installation of the usb hard drive adapter has failed, either.

  What could be the problem?

  Hello

  The dealer has tested the HARD drive and it worked.
  It seems the exterior works of HARD drive and can be recognized on the computer.

  In my opinion it s is not a HARD drive problem. For the most part this external HARD drive needs more power that can provide a USB port. My brother uses external USB HDD and it was delivered with a cable from USB 2. His HARD drive must be connected to the 2 USB ports on the laptop.

  I think that if you have a single USB plug cable, so you should use an external power supply for the HARD drive or try to connect it to the USB hub with external power supply.

  Maybe it will work

• This computer does not have an enough space to the temperory files: error Code 0 x 80004005: upgrade of Vista

  Hello

  I am trying to upgrade to Vista home premium, Vista ultimate, but get the error continues on the execution of the installation program. Here is the error msg:

  This computer does not have a sufficient space for temporary files. Windows installation needs at least 445 MB of space on any partition for temporary files

  Error code: 0 x 800004005

  I want to just point out that I have 4 partition and each partition have at least 5 GB of free space on the disk with one of them having 35 GB of free space.

  Would be grateful if someone can help me solve this problem

  Concerning

  Vik

  Hello Vik.in,

  If you upgrade your Windows Vista,

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click on system and security.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click on disk management under storage.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action

     Note At this point, the existing Windows installation will not be able to start until the remaining steps are complete.

  9. Close computer management.
  10. Insert the Windows Vista DVD.
  11. Restart the computer.
  12. Use the Windows Vista DVD to start the computer.
  13. Choose the desired language and keyboard settings and then click Next.
  14. Click repair your computer at the bottom left of the screen.
  15. When you are prompted to repar startup data, click repair and restart.
  16. After the computer restarts, repeat steps 12 through 14.
  17. If your computer has only one installation of Windows, click Next. Otherwise, choose the correct installation of WIndows, and then click Next.
  18. Click on the link of the Startup Repair tool .
  19. Click Finish once the repair is complete. The computer should reboot to Windows Vista.
  20. Start the upgrade using the Windows Vista DVD

  Here is a link to the article that talks about it:

  http://support.Microsoft.com/kb/928232

  Hope it would work, answer back if it does not work.

  See you soon
  Syed Irfan

• Firefox continues to run in the background after loging out.

  I connect on firefox. Close computer. When you try to restart firefox, I get a message that firefox is still ongoing.

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs

  See "Firefox crashes when you exit it:

  • https://support.Mozilla.org/KB/Firefox+hangs

• HP Envy 15 Notebook PC: HP Envy 15 laptop hinges

  I am extremely disappointed by HP; I bought my computer just long enough so that the warranty expires before that one of the attching the display hinges to the broken keyboard, something that has been difficult to close computer and, in general, to use. It is a problem that other users have had on other models of ENVY, but when I tried to reach out to a HP representative by phone, informed me that I would be charged $229.99 for a repair. It's discouraging and mind-boggling that a mechanical problem, most likely the one who comes to me sent a defective product because it was not the result of the computer never dumped, would cost me about 20% of the price of the computer to fix.

  @rmm268

  
  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).

• Satellite Pro L300D do not automatically extended

  Hello

  I've notified two days ago, when I closed the screen down, he started to hibernate automatically, the system is left on. I was always close computer displayed on the screen and it has always started to hibernate automatically.

  However, now I have to do it manually: I have to go to the Start Menu, press closed computer and choose the button 'Hibernate '.

  What is the problem? What should I do? If I haven´t expressed properly, with the right words, tell me please come back.

  Greetings,

  Lafayet

  Hello

  Have you checked the option that controls the Hibernate mode when the lid is closed?
  Go to Power Options. On the left of "Control Panel" - window "Power Options", click "choose the closing the cover.
  Then you will see option called "when I close the lid. There you can assinge the option for battery mode and connected:
  Choose for both; Hibernate

  Welcome them

• HP Pavilion Elite HPE-180 t CTO: multimedia card reader does not work

  The provided HP 6-in-1 multimedia card on the upper drive before the computer has stopped working. This computer is running the Microsoft 64 - bit Windows 7 home premium, I can't find any information on the card or drive driver on HP or sites in the HP user guides. I had to buy a support external USB, card reader to import photos from the cards. Do you have an idea where to find a driver or how to re - turn on the card reader? He simply stopped communicating. What can be done to make it work again?

  Go back to a restore point is not a viable solution. There are too many updates on this computer because the problem occurred. In addition, returning to a previous restore point does not solve the problem. I continued my research and found the solution on the Microsoft support forum.

  Step 1, uninstall the 'readers' listed under MOBILE DEVICES.

  They all have an error "this device cannot start Code 10".

  Restart the computer.

  Plug a carf Compact Flash and Device Manager reports:

  "WPD filesystem Volume driver does not (code 10)".

  With a card in the reader:
  Select START > > > right click COMPUTER > > > select Manage
  Under STORAGE select DISK MANAGEMENT
  Flash cards will appear in the middle like a FAT Partition window in good health
  Right-click next to the icon
  Select the paths AND the CHANGE of DRIVE LETTER access
  Select Add
  Select the radio button OK (assign a new drive letter or path)

  Windows will automatically assign a new drive letter
  Click OK
  Close computer management

  The computer will recognize the Compact Flash, SD, etc and you can select what you want to do (such as open in the file manager).

  Restart the computer.

  Connect a Compact Flash or SD card.

  The system will recognize the card.

  If it is not the case, repeat the procedure for this type of card management.

  This solution really works.

• When the motherboard must be changed does the PC cabinet to be change simultaneouly must

  My two PCs have stop working on currently due to heavy rain and moisture in my office, when we consult with our close computer repairer, we were advised to change the motherboard and motherboard should be changed, we were advised to change the furniture as you please give the direction that we use the HCL EC 2 pc.

  When the motherboard is changed you change case as well?

  No, it won't be may not be not necessary.

  See the following video (which last about 3 minutes) that explains the operation: -.

  http://www.ComputerActive.co.UK/CA/PC-help/2039758/build-PC-step

  If my comments have helped please vote too useful.

  Thank you.

• Problem Windows Update after reinstalling Windows Vista

  Hi all. I had a big problem, I get viruses on my computer and a friend who is an expert in computer science, says that I have to reinstall my Windows Vista Home Edition Premium, the virus is impossible to remove. I reinstalled who, install all drivers card mother plaplapla... Can I get the problem. When the computer install updates and restart the computer, just tested something: ' installation updated 1/3 0% "you know, it is allmost allways, but then comes the message as (sorry its Finnish and I translate Finnish to English., but I try):"configuration of updates failed. Updates to repeal. Do not close computer. "And then like 15 minutes and the computer to reinstall and updates are not installed. Even my friend don't know what to do, then, he said, that I should ask here. Sorry on my text, now is 04:15 clock, I tried to fix this several hours. I have reinstalled this about 2-3 weeks ago, first of all, I think it's a small problem, solved itself. Then I start looking for help and finally ask my friend and now I ask the help of your part. I'm sorry, I'm so tired, so I can't say to my hardcore computer, ask more, I have to go to sleep. Thank you.

  Perhaps this may be relevant-

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  When you try to install an update from Windows Update on a computer that is running Windows Vista, you may receive the following message: Configuring updates step 3 of 3. 0% complete
  After you receive this message, the computer returns to the screen that displays the same message. In addition, the update is not installed successfully, and the computer restarts.

  or see: Description of the preparation tool system for Windows Vista update -.
  http://support.Microsoft.com/kb/947821

• What is events from COM + has stopped working?

  How can I solve this problem?

  Hello

  Try the following steps:

  Step 1: Try to start the service event COM system + and check that its dependencies are running:

  a. Click Start, and then type services.msc in the box start the search. Click on enter.
  b. when the services window opens in the right pane, look for the COM event system +, look at the status and make sure that it is started and watch the Startup Type and make sure that
  It is automatic or manual.
  c. If all are not as indicated, do a right-click on the service and click Properties, on the general tab, click Start, and select automatic for startup type.
  d. click the Dependencies tab, the first box will be the other components of the system which this service depends on the list, not one of those listed, and then return the list of Services and
  take the same steps listed above to ensure that these services are started.
  e. click OK and close the Services.

  Step 2:
  a. Click Start and then right-click "computer".
  b. click 'manage '.
  c. under the section 'System tools', Double click "Local users and groups" then click on 'Groups' d. 'Administrators' right click and click 'add to group... ". »
  e. click 'Add', then click on "Advanced".
  f. now click "search now".
  g. Double click 'Local Service', then click 'Ok '.
  "NT Authority\Local Service" should appear in the list now
  h. click on 'Ok '.
  i. close computer management and restart the computer.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• EVENT SYSTEM COM + HAS STOPPED WORKING

  Not sure the cause of this message, I have no choice but to come on the forum and ask questions that can help me identify the problem and how to solve it.  I have a laptop TOSHIBA Satellite A205-S5852 with Windows Vista Home Premium operating system.  The details of the message is:
  Signature of the problem:
  Problem event name: BEX
  Application name: svchost.exe_EventSystemApplication
  Version: 6.0.6001.18000
  Application timestamp: 47918b 89
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791a73e
  Exception offset: 691d814d
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 2b5e
  More information 2: d41d8cd98f00b204e9800998ecf8427e
  3 more information: 6c8e
  Additional information 4: 394a6bb34f36a03a2ba20af95ac6aae6
  Open to any suggestion to get rid of sending this message.  Thank you!

  Bori1033AKAFRED & Char8691,
  Here is the solution for the COM event system + no stopped working error:

  COM + a event system stopped working

  Right click on "computer".
  Click 'manage '.
  In the section 'System tools', Double click 'local users and groups.
  Click on 'groups '.
  Right click "directors".
  Click on 'add to group... ". »
  Click 'Add '.
  Click on "Advanced".
  Click on "search".
  Double-click on "Local Service".
  Click on 'Ok '.
  "NT Authority\Local Service" should appear in the list now
  Click on 'Ok '.
  Close computer management, and then restart.

  Please post back and let us know if this solves your problem or if you still need help.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup error 0 x 80070003-Windows

  Win7 Home Premium 64 ceased to make backups and the only message I get is "Windows backup - Windows cannot disable the task of automatic backup for the following reason:

  The system does not have the specified path. (0 x 80070003)

  Try again.

  Would be really nice if you could cut and paste from these error windows.

  Hi Grunt65,

  I understand you are trying to backup file in a local drive or a USB external drive. Please follow these steps:

  Option 1

  Create an additional administrator account to test and try backup when you are logged in using the new administrator account. If it works then you old profile could be damaged.

  To create a local administrator account:

  > Click Start, right click computer and select manage.

  > Expand users and groups local and right click on users and select new user.

  > Enter a user name, name, name, and password.

  > Deselect the option user must change password at next logon and select password never expires.

  > Click on create, and then click Close.

  > Right click on the name of the user account and choose Properties.

  > On the Member tab, click Add.

  > Administrators and click OK.

  > Click OK and then close computer management.
  Option 2
  • Microsoft has a solution for this here: http://support.microsoft.com/kb/979281
  • If that failed then try this: http://support.microsoft.com/kb/929135
  More details here: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/2d5de0fd-581b-4865-87fd-1a34d1a73c29/

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• C: drive enlarge or extend the Win 7 problem

  Hi, I use windows 7 x64bit, recently I installed this OS but somehow during the partition I've entered by mistake a small amount in my C: Drvice (approximately 30 GB) only. Now, after the installation of all programs that I'm going to be necessary, my space memory disk c is declining and I need to extend my c drive volume to avoid another problem whenever I installed another program. Based on some forums and blogs to technical support, all I have to do is go to disk management and click with the right button on c drive and click on Extend Volume, but it is not clickable. Someone please help...: D thanks!

  Victory built in partititionneur has its limits, it can only develop if not used are right next to the C: partition.

  You must use a third-party partition manager, for example http://www.partition-tool.com/personal.htm

  Resolution

  On RT click the desktop > screen resolution > make text and other items... etc.

  Is that what you're looking for

  I'll help you with this problem. I suggest you follow these steps to extend the primary partition:

  (a) right click on the partition (C:------) you want to extend in the now unallocated partition and click Extend Volume.

  (b) click on Next, welcome to the Volume Wizard window extend.

  (c) select the amount of space in MB to use of the unallocated partition to use to extend this partition.

  (d) If you want to redo a partition, select all of the space available for this disc. If there is other disks with unallocated disk space, they would have shown during the selection available.

  Note: It is recommended that you do not extend a volume on a disk with another disk free space. If one of the disks has a hardware failure, all data on that partition (volume) will be deleted.

  (e) click Next. Click Finish in the window end extend. You will now see the disk management console with the new extended partition volume ready to be used.

  (f) close computer management.

  (g) click computer in the Start Menu and see your new scope of partition volume.

  For reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-do-i-extend-the-volume-of-my-c-drive-in/344b6a36-BCD1-4d7f-B638-3a4d048ecea0

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/trying-to-expand-c-drive-with-unallocated-space-in/6efb0a1f-CC27-440e-83e1-eeb643fc5093

• Acrobat error when you start visio 2003

  when I start up visio 2003 I get this error
  
  "Visio could not find this add-on or one of its files.  An error 
  occurred and this feature is no longer functioning properly.  Would you like 
  to repair this feature now?"
  
  I run visio on close computer without any admin rights, so I can't install anything, is there 
  any way to disable this update.
  
  I'm trying to make a fix that I can deploy on more then one computer, and uninstalling acrobat for 
  visio is not an option, because we have user that need it.
  
  any ideas will be highly appreciate 

  Without administrative rights there is nothing you can do.