cluster this warning in the event of failover

Similar Questions

• After trying to install a specific program, I get this appcrash, check the event log,

  * Original title: app Crash

  In general, I store my programs on a USB key. I've never had a problem installing or running

  install them on my computuer using windows 7 home edition 64-bit.

  Lately after trying to install a specific program, I get this appcrash, check the event log.

  It seems to say that the file for this installation is damaged, but how can this be since the installation has worked before?

  Get corrupted - it happens.  Jump drives die all the time.  You might be able to reformat (erase) and get more life out of it, or you can get a new USB, install again and use it until it is damaged again.

  Average life of a disk is 5.2 years, but just like people, many drive die younger and many die older. You never know what will be yours.

• Get a warning in the event viewer: "graphics subsystem resources are over-utilized.

  OK, so this problem happens when I connect my second monitor. But, as far as I know, the second monitor should not be a cause of problem my gpu is a MSi GTX-760, who should be able to run 4 monitors at a time. I also had this problem on my previous graphics card (went wrong in the meantime) which leads me to believe the issue is not with the graphics card.

  I should post you my specs? The details of the event? I don't know how to solve this.
  I would add that I tried a clean install of windows and nothing has changed (also tried various graphics drivers).

  In addition to the grueling process Explorer, you could install RAMMap: http://technet.microsoft.com/en-us/sysinternals/ff700229

  J W Stuart: http://www.pagestart.com

• why I have this warning in the after effects cc 2015?

  Hello everyone

  today I was updating my creative cloud software and I have a problem with the legacy cc 2015

  When I open a file of cc, 2014 in cc 2015 I have this warning and I don't see the composition with which I work.

  Please help me!

  

  It may be a bug in Primatte Keyer after effects CC 2015 (13.5). Note that most of the effects must be updated for this version, as described here:

  plug-ins and after effects CC 2015 (13.5)

  Red giant is looking into this possibility.

• Windows Explorer crashes and get this error in the event log: maximum number of ATI EEU session has been exceeded

  Windows Explorer crashes and it is what I have in my event log. Can anyone help?

  Exceeded maximum number of ATI EEU session

  Hi TodFranklin,

  1. when exactly you receive this error message?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• Programmatically trigger a structure of the event with the value (signaling) is not responding

  Hey, in my attached program I check if the two steps of translation are in a specific position. If Yes, I want my code to execute a sequence of movements. If this isn't the case, I'm asking the user if he wants contributed from this position anyway. It has three options: Yes, go to load (the specific position) and cancel. If he hits Yes, I am using a property of signal value which should update the controls Boolean true, allowing the sequence. Cancellation and work "to load" perfectly fine, but 'Yes' does not work. I think I need a structure of the event to ahndle the value of the Boolean control 'x' change event, however, the addition of this structure of the event for some reason any even do not allow me to click on the Start button of the procedure.
  Thanks for any help in advance.
  Doug

  Really, you should look into using a State Machine.  You should have really not what happens inside a structure of the event.

  In addition, I would like to use a shift register to store this value instead of a front panel control.

• Structure of the event can be triggered a 1 event

  I am using a structure of the event to trigger a 1 off the coast of the event.  I thought that I could check the State I want to trigger the event and this thread the Val (signaling) a Boolean property.  Then I created an event to change the value on this command expects the event fires when the value from false to true.  I think it is this writing in Val Signaling property raises the event each time not only when the value changes.

  The attachment is a simple vi to try to illustrate this point by using the iteration count to try to trigger a 1 off the coast of the event on the 10th iteration.  The Boolean 'once' varies from iteration from False to True on the 10th, but the event is fired for each iteration.  Need to run in debugging

  Any help much appreciated

  Ken

  I've seen this confusion on the value of property front of signage. You expect it would only trigger an event, if you write a different value than the control or the indicator has been set to. This is not the case. She fires whenever you write to it.

  Your simplified example wrote to the property value of signage in the while loop for each iteration. That triggers the event value changed whenever you write to it. Notice that the property is 'signs of value' and not 'value has changed the signs '.

  Some of the examples were complex with the authors of notifications and user events. But the easiest way is just to put the property within a business structure node while it is written only when you want that one off the coast of the event. It does not matter what you write to the node if you send all the data for the case of the event.

  If there is a reason you must write to the Boolean value of traffic property on each iteration of the loop you can use the value written in sub condition to run code in the event. But notifiers, queues and the user just looks complicated events.

• Controls are out of control in the structure of the event

  I have a program that has 4 cases in the event handler. In the third case, a while loop, after that I can't klick control elements more. But I tried this while loop, the event handler has worked well. Thanks in advance.

  Concerning

  Guo Zhongge

  Hello!

  Try looking here: Application Design Patterns: master/slave

• More than a user sources for simple event structure of the event

  I have five different sources, I want to use to generate the user events using the structure of the unique event, acting as a producer loop. Is does not seem to be possible to use five different sets of create/generate user for a single event events structure and the structure of the event does not have the ability to add dynamic event hydrants more than once. Is it possible to do this by using the events structure and user event

  Kind regards

  Austin

  And again in LV2010, (good guess?)  I think this is what you need.

  Michael.

• Epson Event Manager cannot find the scanner driver. Epson said that the event handler is a windows thing, and so is the problem.

  I installed an Epson Stylus SX215. I can print, scan and copy if I use another way, but if I want to use the event handler it says that it cannot find the scanner driver may not use the event handler at all (cannot yet open the program).
  In addition, the scan option "attached to electronic mail" does nothing either. Don't know if this is because the event handler program or because he can not see e-mail programs I have.

  Hi bdelrio,

  Thanks for posting. Try running a System File Checker to find errors.

  Click Start.
  In the search box type cmd
  In the menu start right click on cmd.exe and select Run - As-Administrator.
  In the command prompt, type "sfc/scannow".
  Allow this to fill and run. Please let us know if this corrects and error, or if it reports errors, it cannot fix.

  Thank you! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The event - the print spooler log error could not load a plug-in module

  Using a HP Officejet 6500 a Plus e-All-in-One - E710n p6 - 2036c HP with Windows 7 sp1 64 bit operating system desktop.  I get the following error:

  Log name: Microsoft-Windows-PrintService/Admin

  Source: Microsoft-Windows-PrintService

  Date: 27/09/2012-17:24:41

  Event ID: 808

  Task category: initialization

  Level: error

  Key words: print spooler

  User: PC-1\mpw

  Computer: PC - 1

  Description:

  The print spooler could not load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI. DLL, error 0xc1 code. See the user context information for event data.

  The event XML:

  http://schemas.Microsoft.com/win/2004/08/events/event">

  808

  0

  2

  36

  12

  0 x 8000000000020000

  43

  Microsoft-Windows-PrintService/Admin

  PC-1

  http://schemas.Microsoft.com/win/2004/08/events"xmlns ="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">."

  C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI. DLL

  0xC1

  112

  I have no problem with printing from the desktop wired or wireless laptop. But every time I print something this error appears in the Print Service event log.

  I found that the event ID 315 with error 2114 is a synchronization problem.  When I turn on the printer to the computer before, I get this error in the event log.  If I start first to the computer, and then turn on the printer, the error disappears.

• CGI and the event gateway

  Hi all

  I have create an eventgateway and call the gateway instance using the function "SendGatewayMessage.  The gateway instance works correctly.

  But I write the CGI in pdf format

  The CGI. Server_name is NONE, REMOTE_ADDR is the empty string

  How can I get the servername and REMOTE_ADDR

  Help, please

  You will need to pass this information in the event handler function.

  The CGI variables are built by the web server and the application server.

  Invoking an event gateway with SendGatewayMessage does not pass through the web server so no CGI variables.

• References to cluster in the structures of the event?

  Hello

  I'm building a front panel with, say, a bunch of buttons/indicators in both groups. Inside a while loop, I had a structure of the event with two cases, one for each cluster, waiting for a change in the value of each cluster. I know which button has been activated by comparing OldVal, NewVal.

  Now, I want to generalize a Subvi comparison since I will soon add loads of button clusters. The Subvi I have managed to get to now me returns a string containing the name of the control that has changed its value.

  However my Subvi accepts only one type of clusters only and is not generalizable. I understand that this cannot even be done directly and I have to use control references to move inside my Subvi. But I can't create references of control for the two OldVal and NewVal clusters, only for the control on the front panel.

  So, how to create a Subvi, which returns me a string containing the name of the control with a different value between two identical groups of any type within a structure of the event?

  My LV version is 7.0 and I can't open most attachments on this forum, so I would appreciate your screenshot solutions.

  Here, you can code like this so that you will come to know what button was pressed.

  

• Symbols of the event viewer and 'Error' or warning

  In the "Event Viewer" window, in the file of the application, there are events 1701. All of these events have a 'mistake' or the symbol 'warning' in the column type.  Is this serious? How did this happen and an average person can solve these erroors and these warnings? Kenny

  OK you return

• The event of COM + a system attempted to RAISE the event object. Warning event Id: 4353.

  Original title: anyone know what this means? Its a new one on me!

  Anyone know what this means?

  The event of COM + a system attempted to RAISE the event object: change subscription events but had received a bad return code.    HRESULT was 80040201.

  Warning event Id: 4353

  Im not accustomed to see messages like this.

  What happens if the bad thing is fired?

  Someone please answer as soon as POSSIBLE. My imagination

  will work 24/7 to 100% until I get the

  response. Thank YOU, larrythehawk

  This has happened on Windows XP Pro. The Application of event viewer

  Hi Larry,

  Sorry for the late reply. Let us know a few things before you proceed.

  • You are looking at these errors in Event Viewer?
  • Is affecting how your computer performs?
  • Have you tried troubleshooting on the same?

  Please response so we can help you best.