CM1312nfi (PFM) fell into a boot loop and do not print.

Similar Questions

• Windows XP media center keeps going in a loop and will not complete the boot.

  Rebooted PC, probably because of an update, but I also dropped the mouse wireless in the word, and I don't know if that's the problem.  To start Windows and I have three choices, but if I choose safe, last known config, or normal mode, it ends the countdown and starts, but loops to the same black screen that has the countdown.  Help!   Thank you very much.

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  the problem is known as "boot loop" and it is generally caused by a lack of disk and file system tune up

  There are commands that can be executed in the disk prompt that will help stabilize the boot process.

  However, you need to start with any xp cd and launch the recovery console to log on to the disk system.

  then the disc prompt, run the following commands >:

  Chkdsk

  Fixboot

  FIXMBR

  (the fixmbr will provide a serious warning, but you can ignore the scarecrow)

  then the output, remove cd and the system should be able to boot normally again.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Mouse randomly turns into a bigger sign and does not act as a cursor to all the

  original title: the behavior of the cursor

  Sometimes, and often, my cursor turns into a huge sign and does not act as a cursor at all; Let me not select, click or anything like that.  Acts as a tool "edit page."  I can't understand why or how it turns into that.

  In the mouse settings, make sure that ClickLock is unchecked.  This feature, if enabled, will cause the cursor being stuck in the corresponding mode.

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• How do U get rid of an element of U, sent to a printer dell 305? I tried to cancell the print job because apparently, he hung up and will not print, but I can't get out of the what.

  I sent a document of 3 MB 3 pages for the dell v305 printer. It seems to hang and would not print. I tried to cancel all print jobs, but he finds just there.any ideas on how to get rid of this work and leave the impression that if I can get other printed documents?

  Has a moderator move this thread on forum Windows for the hardware and the drivers of the feedback forum.

  Hi, dadzippytr,

  Click Start and type services.msc

  Press enter

  Scroll down to print spooler

  Right-click on the spooler and select stop

  Wait for Windows to stop the spooler

  Close the window

  Control Panel > printers folder

  Right-click on the printer icon and select open

  Click file > cancel all Documents

  Close the window

  Start > right click on computer

  Click on manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printers

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  Close the Device Manager

  Restart the computer

  Windows will reinstall the drivers

  Go to the manufacturer's website and search for updated drivers

  Don't forget to come back to services and start print spooler before printing again.

• My MX430 keeps going offline and will not print

  My MX430 is set up for wireless printing and keeps going offline and will not print.  I reinstalled the software several times, and it continues to be.  This is my only printer and is defined as the default value.

  Hello sallyb.

  Printer offline may indicate that the printer driver is not configured correctly.  Please, try the following to resolve the problem:

  1. click on start.

  2. click on Control Panel.

  3. click on hardware and sound.

  4. click on devices and printers.

  5 right-click the MX430 printer, and then click printer properties.

  6. click on the Ports tab.

  7. make sure that the check mark is on the port that begins with CNBJNP, then click OK and try printing.

  If the port CNBJNP was already selected if please try right click on the MX430 printer and click on see what printing.  When the queue opens, click on the printer and uncheck on use printer offline by clicking on it, then try to print again.

• Whenever I try to print something from my documents opens and says under xps. file and does not print

  Whenever I try to print something from my documents opens and says under xps. file and does not print. I also tried troubleshoot my computer and it says that my printer is not a driver and whenever he tries to fix it and says that it cannot install a driver. any help would be appreciated

  Looks like you have the default printer configured to be Microsoft XPS Document Writer.  Go to control panel > printers and devices and see which printer is enabled in a green circle.  If this is the XPS Document writer as I suspect, you can right click on your printer and then select "Set as default printer" after you do this, or if you cannot do this, answer with the brand and model of your printer and we are able to help if you have a driver problem.

• Printer is offline and will not print documents

  Printer is offline and will not print documents, the rocker switch "Printer offline" option is not available and it is constantly check on 'printer offline '.

  How can I fix this so I can print the necessary documents?

  Hello destiny.

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • Is the printer connected directly to the PC or it is on a network?
  • What is a printer wired or wireless?
  • What is the brand and model of the printer?

  Try the following and see if it helps.

  Method 1: Disable Antivirus

  If you have installed any third party such as antivirus or firewall security software, I would say you temporarily disable and check if it works.

  Disable the anti-virus software

   

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2: Update the drivers for your printer.

  For more information, see these links:

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  
  Method 3: Restart the print spooler service.
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.

  If nothing works, then manually add the printer to the local port and check.

  Method 4: Manually add the printer to the local port.

  a. go to control panel and click on devices and printers.
  b. click Add a printer, and then select Add a local printer. Click on create a new port. The default value in the drop-down list is Local Port. Don't change that.
  c. click Next.
  A dialog box appears for you request that you enter a port name. Type the name of \\computer name\printer.
  d. type your user name and the name of the printer (name \\PC\printer)
  e. click ok and exit.

  See also:
  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information was useful. Let us know the results once you have tried these methods. We will be happy to help you further.

• Sometimes it prints perfectly, sometimes it prints overnight and sometimes not printing.

  I use EPSON LX-300 + II printer with Windows7 Professional (32-bit) OS.

  in those days he became a hard to print using it... at the beginning, it ceased to print MS-Office files and after that stopped printing my office files that will be printed using the LPT1 Port.

  Sometimes, the time will be 3 to 4 hours, sometimes, it will be the next day and sometimes not printing.

  When checked in the 'devices & Printers'--> which is... the printing of the document will be sent for printing, but no print is generated.

  so kindly help me to overcome this problem.

  Hello Perugudayanand,

  You can try to uninstall and reinstall the printer software and see if that helps fix the problem.

  Follow the below link to do the same.

  https://files.support.Epson.com/htmldocs/CX11NF/cx11nfug/dwnh_6.htm

  I hope this helps. Otherwise, feel free to write us back for assistance.

  Thank you

• black and will not print on hp Photosmart Plus B210a of Window Vista model

  black and will not print on hp Photosmart Plus B210a of model

  The post here could help solve the problem.  Be sure to check the vents.

• Windows Vista Home Basic Edition keeps looping and will not start

  Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.

  I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.

  Bill

  If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• I tried to reload XP using my drive but it failed due to a hardware or software problem, XP is stuck in a loop and does not load. How can I clean my disks and reload XP?

  I have a HP XP of 2005. After a year of use of a premium support tech, my OS must be installed.

  I used the disk and followed the installation steps. I received a message on there was a hardware or software that would effect the install and may not work properly. In any case, I continued and of course I am stuck in a loop.

  I can't go to my office.

  First of all, I get a notice on a black screen to select the operating system to start. There are 2 identical choices. Microsoft Media edition.

  Once selected, a screen appears. "We apologize for the inconvenience, but Windows did not start successfully.
  a recent hardware or software change might have caused this. "

  I have enough to make choices and none work.

  1. choose the last known good configuration to return to the most recent settings that worked. :

  2. do not apply

  3. There is a selection in the Safe Mode with command prompt and if I had used the F8 key to reinstall this option would have worked. To do this, do not hurry.

  what I get is a list of drivers that are installed.

  I'M IN A LOOP BETWEEN CHOOSE TO START WINDOWS WITH MICROSOFT XP THEN A NEW SCREEN APPEARS, WHATEVER I HAVE THAT LISTS THE CHOICES ABOVE.

  I need help reload my OS and wipe the hard drive clean. Is there a software I can download to help?

  Hi btbtms,

  You can follow this link to find out how to install Windows XP on your computer.

  How to install or upgrade to Windows XP

• Want to 110 e - everything - in - a D411a - printer to idle and do not print

  I want 110 e - everything - in - a D411a - currently, print all the pages of my iMac (OSX El Capitan - v 10.11.6) test, but the printer shows as inactive when I try to print documents or emails etc.

  Loading the latest version of the software and drivers, but without success.

  Any guidance appreciated.

  Hey @DT_68, welcome to the Forums of HP!

  I understand that you can't print from iMac running to your craving for 110 El Capitan. In General, idle indicates that the printer is ready and waiting for a print job. Given the efforts that you have already done, I recommend resetting your printing system, repair disk permissions and then re-adding the printer (instructions to follow). If this resolves the issue please click Accept as Solution button below; If not, let me know and I will do everything I can to help.

  Reset the printing system

  1. Click on the Apple icon and then click on System Preferences.
  2. In the hardware section, click on Printers and Fax/Scan. The Print & Fax/Scan dialog box opens.
  3. Do a right click (or Ctrl + click) in the left panel and then click on reset printing system...
  4. Click OK to confirm the reset.
  5. Type the name and the correct password.
  6. Click OK to reset the printing system. The printers and Faxes dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Repair disk permissions

  • Click on your desktop so that it is written next to the Apple Finder icon, and then click OK (you will see this next to the Finder after file, edit and view).
  • Under Go, click Applications.
  • In Applications, select utilities.
  • In the Utilities folder, you will see disk utility, double-click on this icon to open the disc utilities.
  • Click on your hard drive, and then click first aid. Click OK to allow it to run.

  Once the repair is completed, restart the computer and add the printer to the back.

  When you add the printer, please ensure that you use the HP driver.

  1. Select Add another printer or Scanner
  2. Select the printer you are adding and next to the 'use' select the printer driver. As you can see from the image below, AirPrint driver will be automatically selected by default. You will need to choose your printer driver instead. Using the HP driver will help to isolate the problem, if the problem persists.

  I hope this helps.

• Laser Jet 4500N disconnection and does not print

  I got a cable (mini centronics USB) to connect the printer to my mac OS x 10.9.5 via USB. This is my first time the printer connected.  I recognized the printer and installed. He has not been able to print an entire page.  When I select printer and print it Say "Sending data to Printer".  The window will then say "the printer is not connected.  Then I can unplug the usb on the printer and plug it in again and it will print some of the page. (it seems that it prints better if its only text and no image or ink.)  Sometimes, I have to uninstall the printer and install again.

  The pilot is a 19.8 for the printer?

  It is printing only about 10% of a page.

  It says at the top. Any idea here?

  ERROR: UNDEFINED
  OFFENDING COMMAND: @7NLD
  BATTERY:
  -DICTIONARY-

  As I print multiple pages the Offending command: changes. Here's more

  OFFENDING COMMAND: 6WjhI, T
  OFFENDING COMMAND: =:? E
  OFFENDING COMMAND: QN! QQ.c #RS',

  Any ideas? Thank you very much!

  @Marketqr

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar