CMOS RAM recording does not

I received a used without HARD drive computer. A new hard drive has been installed and it works great except for the following:

CMOS RAM is not save the date and time. If the computer is disconnected from the electric or put out voltage of power network ON / OFF switch, when the commissioning and start-up of the computer again, I get the following message appears in the start menu.
"CMOS wrong settings.
CMOS date/time not set
Press F1 to start implemented
Press F2 to load default values and continue"

When F2 is pressed, it starts OK. Otherwise, I have to press F1 and reset the Date and time for it to start.

I put in a new battery, but the result is the same (the old battery shows as complete 3 volts). Checked with battery Tester and found the two 'good '.

What can I do to remedy this?

Compensation of the RTC RAM probably won't much more that what is already the case because the jury does not seem to recognize the presence of the battery, but there is nothing wrong with trying.  Remember (a) to take care of good discharge of static electricity, and (b) all the variables of the BIOS is erased, including BIOS passwords (clear passwords is the most common reason for the use of this jumper, see page 4-40).  Other than the system time/date, you can probably rely safely on "Load Default Settings" when you go into the BIOS setup routine, after you restart the computer.  See section 4-7 on page 4-43.

Tags: Windows

Similar Questions

  • Why any screen recorder does not work on my computer? __

    Why any screen recorder does not work on my computer?

    Hi I formatted my computer and downloaded all the conditions for this, I downloaded hypercam and installed, I tried to open it in the tool bar and the start menu, it still does not work.
    I downloaded another program for recording of the screen, it also did not work, I tried 3 programs, they all did not work
    by the way my computer: windows vista service pack 2 and the screen recorders have worked before I formatted my laptop
    I need a solution pleaseeeeee

    I got this error in the three programs

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: ScreenVCR.exe
    Application version: 1.5.34.0
    Application timestamp: 2a425e19
    Fault Module name: StackHash_b4c3
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception code: c0000096
    Exception offset: 02e42a3b
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional information 1: b4c3
    More information 2: d2a8bebd21e0e9bfa99e084d53ece2b6
    3 more information: 74a 3
    Additional information 4: 0480b6e0a2e7a1df44ee618ae8d0084f

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Please give me a solution... :(

    my laptop computers Info

    Windows is Windows Vista Home Premium
    Intel (r) core (TM) 2 Duo CPU 26500 2.10 GHz
    3.00 GB RAM
    Mobile Intel (r) 4 Series Express Chipset Family

    =============================================
    Just a thought... maybe your video driver or DirectX needs and update?

    Have you tried the following applications:

    (1) Windows Media Encoder 9 Series
    http://www.free-codecs.com/download/Windows_Media_Encoder_9_Series.htm

    Direct Download Link:
    http://www.free-codecs.com/download_soft.php?d=571&s=327

    First steps with screenshot
    Using Windows Media Encoder
    http://www.Microsoft.com/windows/windowsmedia/HOWTO/articles/ScreenCap.aspx

    (2) Microsoft Expression Encoder 4
    http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=75402be0-C603-4998-A79C-becdd197aa79

    Expression Encoder training videos
    http://expression.Microsoft.com/en-us/cc197144.aspx

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

    Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

    CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

    HTH,

    JW

  • LG DVD-RAM drive does not read disks in Windows xp

    ? LG DVD-RAM player does not play discs in my Windows xp...
    whenever I try to install the os (operating system) after it has been failed... he couldn't read the original 'os' and every time I install the 'os' by external dvd wrirer... is there any solution to this problem? I want to install "os" to my dvd burner cpu.

    It could be hardware issue, try to run the tool:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

    If this tool might not solve your problem, contact the manufacturer of DVD support.

  • Sound Recorder does not work XP

    My recorder does not work.  The only way it works is that if I plug a headset with a microphone.  He worked at one time, but I ran HIJACK THIS and think that something has been removed.  Help, please.  Thank you!!

    You have posted on a Windows 7 forum, but referred to as "XP" - Please use the link at the top of the page to return to the XP forum.

    If you meant 'Windows 7' then use the audio troubleshooters in Control Panel, troubleshooting.

    If this does not help, check the devices errors & drivers updated in Device Manager.

  • Stereo video recording does not work after update to ICS

    HII am dido in the India. I've updated my xperia mini (ST15i) to ICS. After that the stereo video recording does not work. Last week, I found a new update for the CSI and I updated to construire.587, now also the same problem exsists. Someone please help

    You can fix it, but you need to root your phone

    Look at the xda forum how do (you must change a setting in a file config. Furthermore, also you can improve some other characteristics of the camera)

  • Sound Recorder does not record

    Sound Recorder does not record when you select Save the meter shows no activity and there is no reading. When I tested with Skype this counter moves indicate he picks the sound, but reading all that was heard was a buzz. The microphone works fine with Yahoo messenger for calls to land lines to cell phones and Computers computer 2

    Sound Recorder does not record when you select Save the meter shows no activity and there is no reading. When I tested with Skype this counter moves indicate he picks the sound, but reading all that was heard was a buzz. The microphone works fine with Yahoo messenger for calls to land lines to cell phones and Computers computer 2

    ===============================================
    Maybe the following response has already posted by: Azam K. would be worth a peek:

    Sound Recorder does not not under Vista
    http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/cf6003b6-AADD-4107-a1b7-2c9b88a3f48b

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

    I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

    Please would you give me help? I really appreciate!

    Thank you very much.

    Eleanor

    A prompt by right clicking and select "Run as Administrator"
    and then at the command prompt, type: chkdsk /f r, then press the Enter key.

    If you are asked to plan the volumn to check the next time that the system restarts,
    Enter: y

    If you know the manufacturing of your hard drive you can also download their diagnostic software.

    Another use: SpeedFan has an online health analysis function
    (SMART tab) for hard drives. It will show how your disks
    compared with other discs of the same brand and model.
    http://www.almico.com/SpeedFan.php

    ========================================================================

    Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

    Click on start / all programs/accessories then
    Right-click on the command prompt option and select "Run as Administrator".
    (or "Safe Mode" open a command prompt)
    At the command prompt, enter: SFC/scannow

    Windows 7 - order SCANNOW SFC - System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
    http://support.Microsoft.com/kb/928228

    J W Stuart: http://www.pagestart.com

  • Countin records does not?

    Hello guys,.

    At first I would say thank you 1 million for all who share ideas, advice, suggestions and solutions to solve this problem.

    Here is what I have met, I created the formula as MAX (RCOUNT (1)) in a dummy column to count the records and his work on if I used Quick column but when I filtered using prompt Variables namely the "grade of ' and ' grade to ' count of records does not work. Why it does not work?

    Anyone want to share suggestions, advise and I really appreciate a solution thanks to all.

    I finally solved this problem with the formula "MAX (RCOMPTE (box when rank ("nominative DPK".". " Balance") > = @{pvRankFrom} {1} AND the grade ("nominative DPK". "Balance") "<= @{pvrankto}{100}="" then="" "account"."account="" no"="" else="" 0="">

  • Siri and audio recording does not

    Hello

    the audio recording with my front camera does not work and Siri cannot hear what I say.

    All the other stuff that needs a microphone works perfectly and I installed the latest version of IOS

    Hope someone has an answer to this problem

    Vanessa

    Hello

    Try following the steps outlined here:

  • Some records are not in my list of bookmarks; the individual bookmarks can be found in the search, but the record does not show.

    Some records are not in my list of bookmarks; individual bookmarks can be found in the search, but the folder does not appear in the list of bookmarks, and results do not indicate where the individual bookmarks.

    You can use an add-on to display add a column to the Library dialog box for the folder of the bookmark.

    https://addons.Mozilla.org/firefox/addon/show-parent-folder/

    The extension can indicate only the name of the folder or you can view the full path via the menu in the folder. This full path option is useful if a file accidentally gets you drag somewhere in order to explore the it and find it.

    To access the settings of the extension, you can use the page modules. Either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click Extensions. Then, find the Options button under the specific extension.

    A little luck?

  • Satellite A100-234: Real Player sound recording does not

    Hello

    I have problem with my sound system. I have the satellite A100-234.
    When I try to record from the sound recording, that it does not record...

    Please please please help me if you can

    Hi Ad

    Many applications use third part is not really about Toshiba, but it will be interesting to know what you want to record exactly (some radio music station?). If so, I can recommend you radio RIP Internet Radio Jack.

    Also, try to see the real support page. They can give you more info on clean products.

  • Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

    I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

    Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

    Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
    DVD player is Mat * a DVD - RAM UJ - 841 s

    Any suggestions?

    Hello

    On the Toshiba driver page, you can find the DLA for Tecra m7.
    Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

    Maybe it'll market

    But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
    This is why an additional driver should not be necessary!

    An additional proposal;
    Remove the drive from the Device Manager CD/DVD and restart the laptop.
    After restarting again the OS should reinstall the drive and renew the software.

    Another tip:
    -Launch the registry
    -Choose the registry key;
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
    -Reboot the laptop

  • DVD - RAM drive does not appear in my computer (Satellite M30)

    Hello
    I have a rug * a DVD-RAM UJ 820 in a Satellite M30
    It seems that the driver does not work and the DVD unit is not showing in my computer - the device however seems to work - I was told a solution may be to download the driver and re-install again. Any idea where I can get that? You have any other suggestions on how to fix this?

    Thank you

    Hello

    drivers are located on the download site for the driver from Toshiba:
    https://EU.computers.Toshiba-Europe.com
    under Support & downloads, download drivers

    If this does not help, look around this forum. I saw some other threads on this DVD player.

    Good bye

  • &lt; double &gt; call recording does not work after 5.0.2

    Since I've updated my 2nd generation of bike g lolipop 5.0.2 I can't record my calls, the app only record my voice, but does not record the voice of the one person talk to. have you tried the other app, please can someone recommend a call recorder that works on 5.0.2 .cos I use it for my business to examine complaints and arrested.

    There is already a thread here:

    https://forums.Motorola.com/posts/bf15c93ecf

    Please continue the discussion there before creating new threads on the same issue. Search is your friend.

    Double wire closure.

Maybe you are looking for

  • How to install and format the iPod Shuffle 512 MB in Windows 10?

    I tried to install and old iPod shuffle 512 MB (the long one) of 10 Windows 64 bit computer since the original installation CD and it retains formatting forever. I had to stop the installation. Any ideas?

  • CTRL keys do not work on Portege R500

    Both CTRL keys do not work on my Portege (Vista Biz) 500. I guess this isn't a hardware problem. Because that both keys are not recognized even though I hardly use the CTRL button on the right. I don't know if it is caused by a program (newly install

  • accuracy of polynomial roots

    Hi all Does anyone know the accuracy of the polynomial root function up to how many decimal places can I be sure of the result of the root? Best regards Tinnitus

  • 4540 proBook s: Please help: not found a bootable image. Laptop will be stop

    Hallo, I got 10 original operating system windows. I tried to install ubuntu. but during the installation I think that Mariette a mistake in the selection of the partition. now, I'm having a problem that says "No. Bootable OS found, notebook will be

  • HP Officejet Pro 8600 Plus: problem of print head

    Have had this printer for a couple of years without any problems.  All of a sudden getting the message: printhead appears to be missing, not detected, or incorrectly installed. Lived all the recommended diagnostic checks but still a problem. I got it