(Code 10) HP webcam problem

Similar Questions

• Integrated with HP Pavilion dv9715nr notebook PC webcam problem

  Hello everyone,

  I hope someone can help point me in the direction of a fix of webcam for the problem that my laptop has developed. I spent the last few days browsing the internet looking for a solution to what seems to be a widespread problem, but with no satisfactory solution.

  The problem:

  A few days ago my integrated webcam works with Youcam and other applications of webcam with the message 'not found webcam' or 'Please turn on integrated webcam. Dutifully, I went to the device manage and felt that there was no imaging device listed.

  Related problems:

  In addition to this problem, I sometimes get an installation of an unknown USB device. This device is, I'm sure that the webcam, but try as I might I cannot point to the drivers of webcam or update its driver to something other than the best driver that is already.

  What I've tried so far:

  -Reinstall the drivers from the HP website. None of the many different types of pilot managed to bring the webcam life or showing in imaging devices.

  -Follow-up guide HP for the problems of webcam that ends up pushing me towards contacting HP help desk. Which, I imagine, will cost you a lot more money than the I have no money.

  -Uninstall all usb devices and reinstall using scan for the hardware changes. This has, once or twice, brought back the web cam and imaging device and worked for a while. However, before I can update its drivers computer freezes and turns itself off.

  -Flashed the bios. No change.

  -Downloaded the drivers from various other cam as suggested in the huge amount of bugs, there are online for this problem. Unfortunately, none of them worked.

  -Recovery plant recovery drive. The webcam is still missing in the imagery of the Device Manager section.

  Technical specifications:

  HP Pavilion dv9715nr notebook PC

  Vista 32 bit premium - service Pack2

  AMD Turion Mobile Technology TL-60 2.00 GHz Dual Processor

  1.94 GB OF RAM

  BIOS F.33, 3.09 M

  Webcam integrated into the lid of the laptop.

  Demand:

  If I understand the large amount of online discussion on what is a common problem and I hope that, among the pages and pages of bugs I looked, I missed a fix somewhere.

  If you have had and solved the problem, or if you have an idea how to sort it out, I'd love to hear from you.

  Edmonds (not Christmas)

  Hello again,

  First of all, let me thank the support forum HP for all their advice and now down to business.

  After a week of problems webcam and extensive research on the internet for a fix for the problem that I finally managed to get my webcam - however, I'm not sure how I did it.

  Below is a step by step guide.

  • Become very frustrated.
  • Buy some alcohol
  • Drinking alcohol and try every difficulty in the following two web pages.
  • http://www.PlanetAMD64.com/lofiversion/index.php?t31194.html
  • http://Forum.NotebookReview.com/HP-Compaq/149463-webcam-problem-solved-fingers-crossed-heres-hoping.html
  • At some point during the evening, a HP pavilion webcam appeared, but was very maintained code.
  • Give up, turn off the computer laptop and pass out.
  • Laptop start up the next day and find work and rear HP webcam.

  Now, I know that's not exactly the most empirical of bugs, however, it worked for me. From what I remember last night, the key points seem to be the following. If I insist I was very drunk and I tried almost every difficulty in the two websites above. (The bullet points below are not related)

  • Installation of a very old version of Quickplay.
  • Install the drivers from the DPinstall32.exe.
  • Get a webcam driver update Ricoh are displayed in windows update.
  • Go to Panel configuration/program and using change to the webcam repair and modification.
  • Play with the Services Windows Image acquisition.

  There was, no doubt, many other things I've done and, quite frankly, I am surprised that I did not kill my laptop I did most of them at the same time. However, the webcam is back and running so I recommend drunken stupidity and perseverance as key elements of this fix.

  Finally, somewhere in the two threads I linked will be your fix. There are a lot of different patches so keep and you can do with one of them.

  Good luck. Mines a pint of the black stuff.

  Edmonds (not Christmas)

  Edit - Add the WIA service.

• Resolution of the webcam problems

  Hi all

  I finally decided me coming here on a resolution of the webcam problem: since Skype updates that followed the 6.2 version, I can't simply a resolution on my bodily proportions. In other words, I think that Skype automatically assigns to a resolution of 1280 x 720, which makes my head like a balloon look hot air (not really convenient for job interviews, I must say). And Skype seem not to care about changes in resolution, as I do in the file "config.xml". Any idea to solve this problem? I really want to be myself again.

  Thank you very much in advance!

  Hi guys, we have made some changes to fix the problem with the BisonCam, NB Pro cameras. Can you please restart your last client Skype for Windows Desktop (6.11) and see if now BisonCam Nb Pro works? Thanks in advance

• Webcam problems (Windows 8)

  Hey, guys.

  I see several issues came with the internal webcam not working is not after the upgrade to windows 8.

  

  Here is a Document to help you guys of the incase you encounter this problem.

  Now, there may be several scenarios with webcam problems:

  • Can't find webcam or software of the webcam.
  • Video does not appear in the software of the webcam (Youcam, Skype, Messenger, etc.).
  • Webcam is not listed in Device Manager.
  • Webcam stopped working after Windows update.
  • Installed other programs of webcam and webcam does not work.
  • Image quality problems.

  If none of these steps work, please go to the last section that says "reinstall the original webcam program that came with your computer.

  THX

  I hope it's useful!

  THX

• I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they

  I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they add the js include. They recommend at this time that I use another program like Wordpress, but I won't do that, because a large part of the site is designed and just add the markets. Here is the link to the site. At this point, the home page is the question. I can also provide a screen shot of how markets are supposed to look like

  This part does not seem too difficult.

  I bet they are now trying to "knit" their share of data right in your Muse- generated page, and they tell you that your code is terrible (and their smells like daisies). The usual clash...

  But it might be easier for you (and many others) if they offer their content as a separate page of small, so you can incorporate it as an iframe tag in an HTML object in Muse. No matter what code for permission to host the iframe, could be inserted as a simple script in Panel of Options of Page of Muse.

• Pavilion dv7 6c95dx: hardware with built-in microphone and webcam problem

  A couple of months, I had someone replace my fan and the heat sink. Since the replacement my integrated webcam and MIC do not work. I tried to uninstall and reinstall the drivers several times. When I go to device management there is no legacy Imaging. If I click on display - display the currencies of imaging equipment shows up, HP Deskjet 2050 j510 series (USB) HP TrueVisionHD (twice) and USB video device. When I click with the button straight on and go in properties on any of them, he said

  "Currently, this hardware device is not connected to the computer. (Code 45)

  To resolve this problem, reconnect this hardware device to the computer. »

  I think that when my fan has been replaced the webcam/mic cable may have been disconnected or damaged but I don't know what cable it is. Can I disassemble my laptop if I have to, but I don't know where the webcam and microphone are hung and I could not find in a manual or anything.

  Hi @gmurph52 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion dv7-6c95dx Notebook and questions with the WebCam. Thank you for all the information about what you have tried and what you see in Device Manager. Very useful.

  I would like to start by uninstalling the devices listed in your device under imaging devices Manager. Reboot the laptop.

  Do you see something new in there?  Here's a document on how to fix the WebCam as the computer sees connected and recognizes it.

  Are not, you may have to check the connections. Here is a link to your manual page 30 parts and page 84 of deletion for the location on your laptop.

  I hope this helps.

  Thank you.

• Plug-and-play webcam problem

  I installed a webcam plug-and-play. All the drivers were successfully installed and it is listed under devices as being upwards and running, however I can't find anything to open it and use it. Help?

  Hi Raldir,

  It would be great if you could answer these questions to help you further.

  1. what happens when you try to access the webcam, summers - get you any error message or error code?

  2 have you made changes on the computer before this problem?

  3 are you referring to a webcam in the generation?

  This problem can occur because of driver or settings problem, try the following methods and check if it helps.

  Method 1:

  Run the hardware troubleshooting tool.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:

  I suggest you to uninstall and reinstall the webcam and check if it helps.

  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Hope that the information provided is useful.

• Satellite NB10 A986 webcam problem

  Hello

  Please help me, I have a problem of blur using the webcam with Skype, and even with the camera utility windows 8.1, videos on Skype and photos taken by webcam are blurry (sorry for my English!).
  I don't think that there is a plastic sticker on webcam.
  Satellite NB10-A986 PU142V
  I'm on Windows 8.1 - 64.

  Thank you;

  It is really strange. Have you noticed from the first day of use?
  Make sure that the cam is not covered by a sticker and it must be clean.

  Problem is that camera is controlled by the Microsoft utility, and there is not some additional options that we had on the old version of the application from Toshiba web camera.

• HP au003tx: webcam problem

  I recently bought au003tx laptop.webcam to this laptop poster image quality very bad as blurry.i tried app third party for webcam.but watch still blurry photos and vedios.can resolve this problem or it's original quality of this webcam.

  Hi @babadt,

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Equium P300-16 t - Chicony Webcam problem with Vista

  I have an Equium P300-16 t and when it is connected to the broadband router, everything is ok!

  However, when the use of the laptop wireless and with the help of MSN Messenger (with webcam running) it keeps freezing upwards and after a short period of time will continue to work, then keep freeze again--almost as the buffer continues in full and it is having to refresh

  There is a mention of this on the support pages that mentions KB934374 which is supposed to be part of the MS Vista SP1
  I installed this SP, but Ko in question is not part of it, and I can't seem to locate an individual download for this KB

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=faq_selection&CFID=Windows Vista & FID plus TIU0000003b66

  Any ideas anyone (other then throwing the phone against a wall and stating that it was an accident!)

  Hello

  After searching on Google for this KB, I found the 'hotfixshare' site, which includes this fix. The only thing is that you have to register on their forum, but it's the only thing...

  Later, you can download this hotfix and check if it works. I would say also allows you to download the latest webcam driver for your machine on the European driver download sites because they could possibly solve your problem.

  Welcome them

• Satellite A210 - 15K: webcam problem - graphics make it fail

  Hello

  I have a toshiba A210 - 15K, but I seem to have a problem with the integrated webcam for laptops. When I turn it on I can use it without problems all the time, but sometimes after a few hours of no use when I try to use it again it gives me the following message: "chart make fail" and it runs at all.

  In order to make it work again I have to restart the computer, and even if I restart sometimes it does not start.

  Someone knows how to fix this?

  Thank you

  I noticed the same thing on my Satellite P200. After reboot, everything works again. I don't use a webcam so often and it is not so important to me, but you can try to stop (exit) web cam software and start it again.

  Maybe this will help. Can you please send the result? Right now my cam works well and I can't wait to check this option only.

• Satellite A300/A300D Webcam problems

  Hey sorry if this question was asked before, up to what recently worked my webcams recently I get the following error message *'Web fail open driver. Restart the computer or the camera '. * I tried to do both and no result, I wondered if anyone has had this problem and it is resolved.

  See you soon

  Hello
  You should try to reinstall the software for the webcam. You should be able to download the software via the link below.
  [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU]

  Concerning
  Ben

• Satellite A40, running windows xp, webcam problem

  I have a webcam and a fujifilm finepix camera that can be used as a webcam. I can't work on my laptop. When the software is downloaded and it should start working the screen going blue with white writing, I can't read it because the laptop turns off immediately. I downloaded the updates from microsoft and fujifilm, nothing works. I can run them on an ordinary pc under Windows Me, but I wonder if it's a problem with the hardware of the laptop computer and the version of windows? Any assistance received with joy.

  Hello

  You can try to use the USB ports on differet. There can only be one or two Ports can handle a digital camera!

  Otherwise you may chck your USB drivers in the Device Manager in Control Panel.

  Goodbye, TOK

• Satellite Pro A40 psa45e - error code: what is the problem of flashing

  I just bought the laptop above Satellite Pro A40 (psa45e - 0184 h - en), which came with a generic power.
  The great laptop worked until the other night.

  The light on the power supply is on, output is 15 Volt, turns on the laptop at the front, an orange light comes on and blinks 5 then 2 then 1, I guess the 521 error code.

  Unplug everything and the light goes out then two green lights turns on, then laptop has started twice and started upward (running xp) but then freezes.

  I guess the power supply stopped working and the chip has noticed the problem.

  Can anyone confirm the fault error is feeding or is there something else wrong.

  Need to know before you buy the Toshiba power, I don't want to lose more money.

  Help, please...

  How much is your generic AC adapter?

  The amps must be the same or greater than what your laptop needs. You can view the Volts + Amp requirements based on the laptop (serial sticker).

  So if the laptop needs 15v 8A... you need a 15v 8A or 9A 15v or AC adapter / higher CC.

  If the amps are too weak, in the custom of mobile devices get enough power and could cause damage.

  You should get yourself a good Toshiba adapter for peace of mind. Cheap generics can be more trouble than they are worth.

• Equium A60 webcam problems

  I have a Creative Live Ultra for Notebooks which I just can't work with my Equium A60-156. When I install the software it tells me no drivers have been installed and that the device not recognized. I have the latest version of the BIOS & tried to change the powersave & various other Creative solutions suggested all to nothing does not!
  Has anyone else had this problem and overcome?
  Creative discussion forums are filled with people with notbooks toshiba with this problem.
  Help! I'm getting desperate.

  Hello

  Maybe there are new drivers on the producer of webcam sites.
  I suggest check the drivers and reinstall the drivers again

  Good bye