Code flashing Portege Z30-A-152

Similar Questions

• Portege Z30 - B - 10 c: is THNSNJ256GMCU SSD supports hardware encryption

  I have a Toshiba Portege Z30 - B - 10 c with 256 GB SSD (exact model THNSNJ256GMCU).
  On the Internet I found weather mixed info, this drive takes in charge or no material encrytpion.

  Could someone help me find the answet to this question and, if it supports encryption.

  How to activate it?

  THNSNJ256GMCU

  Main features
  • Capacities up to 512 GB
  • Available in four Standard form factors
  • MLC NAND Flash memory
  • Low-power Devsleep feature support
  • The end-to-End data protection
  • Gravitational quadruple Code technology (reverse)

  More features
  • Translation mode which allows all disk configurations
  • Hot plug/OS-Aware removal
  Exclusive Toshiba • error correction technology, reverse (Quadruple gravitational Code Technology) support
  • Read only mode supported for emergency

  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

• Portege Z30 - A - unable to connect to the GSM mobile network.

  Toshiba Portege Z30 - A Windows 7 Prof

  When I try to connect to a modem GSM receives the error:
  "Network connection based on a mobile broadband connection failed with the error code: 1.

  (GSM card works properly in other devices)

  Hello

  According to the Microsoft Knowledge base, the error code 1 means that the device is not configured correctly.
  One of the reasons why the device isn't configured correctly might be missing a driver or the driver / software are configured incorrectly.

  Recommend you to check the configuration.

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• BIOS of the computer 0xc004f063 Portege Z30-B-117 lack license required

  in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today, I discovered the information that is required to activate windows. The laptop has been pre-installed Win 7 Pro and media attached to Win 8 Pro. In notebook isn´t COA label. When you build the code and enter the Activator appears information - computer license lack required error 0xc004f063 bios. Microsoft, I was told that my product key is required to provide a computer manufacturer. Please help, I could turn on the system and work again. Thank you very much

  in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today, I discovered the information that is required to activate windows. The laptop has been pre-installed Win 7 Pro and media attached to Win 8 Pro. In notebook isn´t COA label. When you build the code and enter the Activator appears information - computer license lack required error 0xc004f063 bios. Microsoft, I was told that my product key is required to provide a computer manufacturer. Please help, I could turn on the system and work again. Thank you very much

• Portege Z30 - A - Intel Rapid Storage do not work

  Hello

  Intel Quick pad do not work.
  I can enable it in the bios (4.00).
  Do you have someone has the same problem (I tried evrything: standby, hibernation, toshiba start of high-speed...)
  I think that I would not have flashed the bios to 4.00

  Where can I find the older BIOS version?

  Thank you

  My computer: Portege Z30 - A (PT241E)

  Where can I find the older BIOS version?

  Maybe this thread could be useful:
  https://Forum.Toshiba.EU/showthread.php?83449

  I can enable in the bios (4.00)

  .
  Sorry, but what do you mean exactly? This option is dimmed or is not available or what?

• Portege Z30-A-1FL no longer lights

  Hello world

  My Portege Z30 almost nine no longer starts. There is only a single flashing bright white - one for DC/battery - but other than that: nothing happens :(

  What can I do?
  Thanks for your help and your support.
  BA

  Sorry to hear that

  Portege Z30 is very nice, good looking for Ultrabook and as far as I know the laptop battery isn't removable t s. So the work around common that remove battery and pressing/holding the power button 30 sec long isn t possible.

  In any case, I guess that s portable began to hurt function and localization of the fault will not be very easy. The mobile engineer would generally use a special and software diagnostic test to know what could be the problem exactly.

  From my point of view the question could be linked to the memory problem or malfunction of the motherboard and I guess that both parties should be checked for possible problems.

• Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

  Dear all,

  My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

  I can not hibernate through the following methods:
  1. click on 'Start', 'power', 'Hibernate '.
  2. press x and windows, click on 'Close or disconnect', click on 'standby '.
  3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

  Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

  Well want to can someone help?

  See you soon,.
  Bender22

  Dear all,

  There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

  I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

  Can anyone help, because Toshiba cannot.

  See you soon,.
  Bender22

• Portege Z30 PT311E - X 11 crash on Linux Debian Jessie

  I have a Portege Z30 PT311E-01P03GIT

  The laptop works very well in dual boot with Windows 7 and Linux Debian 8.2 (Jessie).
  Under Linux, all hardware is recognized and work, but one notable problem occurs at any time, I try to open a movie from Youtube (or do the equivalent local thing).
  The Xorg server dies, killing all programs and user processes and start the KDM login prompt.

  It connect new, all continue to work until the next Youtube movie embedded in a site or things like that.

  Other than that, all the features and video modes work.
  Any help to solve this problem?

  Thank you

  Below, the initialization of the kernel dmesg messages

  Jan 25 13:39:40 core scree: Console [1.985921]: switch to the color buffer device frame 160 x 64
  Jan 25 13:39:40 Screes kernel: [1.988746] 0000:00:02.0 i915: fb0: inteldrmfb frame buffer device
  Jan 25 13:39:40 Screes kernel: [1.988763] i915 0000:00:02.0: registered declaring panic
  Jan 25 13:39:40 Screes kernel: [2.050218] ACPI: video device [GFX0] (multiple heads: Yes rom: Yes post: no)
  Jan 25 13:39:40 Screes kernel: [2.050388] input: video Bus as/devices/LNXSYSTM:00 / LNXSYBUS:00 / PNP0A08:00 / LNXVIDEO:00/input/input6
  Jan 25 13:39:40 Screes kernel: [2.050445] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

  Hello

  You can try to disable the frame buffer by adding the following for initialization arguments in GRUB

  fb = false

  Here is a non-Toshiba, not Debian related article describes some useful steps:

  http://KB.Digium.com/articles/FAQ/HO...using-problems

  I hope this helps.

  Tom BR

• Portege Z30 - I am unable to send SMS

  I have a Portege Z30-A-13F. On the previous Portege, Ericcson device shipped, I used the Toshiba Wireless Manager and the SMS from Toshiba utility in access card for messages (SMS).

  Currently, with the integrated chip of Sierra, I am able to access the network, but there is no interface for SMS on the AirCardWatcher tool.

  The Wireless Manager does not work (I think it only works with Ericsson devices).
  Is it possible to use the SMS with this computer?

  Thank you very much

  AFAIK this is regardless if the laptop supports the Ericson or the Sierra 3 G module.

  The Toshiba Wireless Manager should work fine in two modules.

  Check this document... He explains how to set up and establish a 3G connection via the Manager preinstalled Toshiba wireless.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

• Portege Z30 Module problem - A - 13 L 3 G

  I had a problem with a new Portege Z30 - A - 13 L.

  Module 3 G / 4G do not work. As a first step, the Air software map Watcher on the first Installation of Windows 7 detects the sim card and showed a signal, but it Air card Watcher Software still not said no reception (in German: Kein receipt).

  I also put the right apn in the profile.
  I had this problem with 2 different operators sim cards.

  Cause I wanted to use Windows 8.1 anyway I installed it with the original recovery disks.
  The original Windows 8.1 don t comes with Air card Watcher, so you must do with the instruments of the Board of Directors of Windows 8. Windows 8.1, I had a same problem. It detects the SIM, but it says no network (in German: Kein Netz). I put t found the possibility of changing the apn in 8.1 of Windows until you have a mobile connection.

  Initially the Device Manager displays the Module of Sierra Wireless EM 7305 as a network card.
  Then, I uninstalled the driver of Sierra Wireless and installed the Toshiba page.

  After that the Sierra Wireless Module presents itself as a Com device in Device Manager. The cause so much of this networker of Sierra Wireless adapter isn t it, the mobile broadband connection don t even shows charms Windows 8.1 bar upward.

  After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  Then I uninstalled and installed the driver manually again.
  He appears again as com device in Device Manager.

  So I think that the module has been a hardware failure. What do you think?

  > After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  > I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  On the page of the Toshiba UE driver, you can find and download the [Sierra Wireless Driver LTE 4 G driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17549 & STAS hortMod = null & language = 13 & selOS = 46 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 90092 & OS ID = 46 & driverLanguage = 42]
  This Wireless Broadband Mobile driver is used to transfer data at higher rates and greater capacity.
  Install it!

  Also 3G must be activated before you try to establish a 3 G connection.
  Please check if the 3G module has been activated correctly!

  Recommend checking this information page of Microsoft Mobile Broadband end-to-end
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  You will find different troubleshooting tips.

  In the case where you have a signal but you can't connect the possible reasons could be:
  You don t have a valid data subscription.
  The name of the access point (APN), user name or password used for the connection is not valid.
  You're roaming and the selected network operator doesn't allow data services or you don t have roaming enabled for data services.

• Satellite vs Z30 Portege Z30

  From what I can tell (and confirmed to the Toshiba customer service) the Satellite Z30 is identical to the Portege Z30 except for the following differences:

  * The Portege Z30's Active Management Technology (AMT), which allows some administration remotely for enterprise environments
  * The Portege Z30 has a warranty of 3 years (1 year of the Satellite)
  * The Portege Z30 is pre-installed with Windows 7 and Windows 7 system restore partitions (and Windows media 8.1 provided) so that the Satellite comes pre-installed with Windows 8.1 system partitions and restore

  My question is if the roller on an image taken of installing Windows 7 from a Portege Z30 will transfer to Satellite Z30 machines? I suspect there will be no problems with the hardware, but I'm curious about Windows activation and if the SLP on Satellites key will match the Portege.

  Please be so kind and send feedback after your recovery image experience.

• Toshiba Portege Z30 - A - Accupoint does not work

  Hey there!

  I had a problem with the Accupoint, he moved alone, so I disabled it.
  But the problem is that I have also disabled the two buttons above the key.

  A is it possible to repair the Acupoint or disable without disabling the buttons?

  I have a Toshiba Portege Z30 - A with Windows 10

  Thank you!

  AccuPoint or Trackpoint

  

  I think it's a touchpad cable problem. Send in for repair.

• Portege Z30 poster ipv4 and ipv6 - only pxe boot is

  Hi all

  Toshiba Portege Z30

  We do all our installs via PXE, when you press F12 I get now two network options where normally I would just get a.

  F12 gives the following options:

  HDD/SSD: SAMSUNG SSD SERIES
  LAN1: IPv6
  LAN2: IPv4

  When I select the option I get what follows read (IP addresses were not included, but are correctly pointing to the right servers):

  ------------------------------------------------------------------------
  > On IPv4 PXE boot.
  IP address of the station is *. ***. ***. ***
  IP address of the server is *. ***. ***. ***
  NBP filename is SMSBoot\x86\wdsnbp.com
  The NBP file size is 30832 bytes
  Download the NBP...

  Succeed to download the NBP file.

  Download the NBP...

  Succeed to download the NBP file.
  Press a key to continue...
  ------------------------------------------------------------------------

  I tried searching through the BIOS settings but can't find nothing obvious

  Can any advise if there is anything I can try to get this laptop to perform a PXE boot please

  Let me know if you need additional information

  Kind regards
  Steve

  Looks like your server isn't aware UEFI.
  Try changing the the CSM UEFI Boot Mode in the BIOS under the Advanced tab, under System Configuration. You may have to disable Secure Boot first.

• Portege Z30 - smart card reader does not work

  Hi, I just got my new Portege Z30 a few days ago.
  I try to use the card reader chip for my Spanish ID (DNIe) and seems to not work.
  When I insert the card as stated in the users manual, nothing happens.
  I have to player of SC "actuvate" somehow?

  (DNIe needs a compatible with ISO7816 SC reader, as one installed in my laptop seems to be)

  Usually you should not activate anything. Check the status of card reader in Device Manager please. There is everything OK?

  Make sure that you use a compatible card and it is inserted correctly.