Portege Z30 Module problem - A - 13 L 3 G

Similar Questions

• Portege Z30 / driver Audio Replicator + Touchpad scroll problems

  Hello.

  I bought a Z30 and I'm pretty happy with it that I worked for years with the Thinkpads (+ Dock)
  but there are a few light (more or less can be addresses as a driver) questions that I discovered.

  Notice: I use Win7 64.

  (1) with the Replicator Docking Station, I'm not able to remove the USB Audio device is currently running.
  As you play a video or music. -J' looked for a newer driver (from C-MEDIA) as the standard Microsoft Driver may not be the best choice but I have found NO Win7 drivers for this device. The pilots of C-MEDIA only I found is Win8.

  (2) ALPS Touchpad (pilot)... EH... the material error only on this model really seems to be the touchpad. It is quite difficult to click on buttons AccuPoint (those under the keyboard) and drivers of touchpard are not flexible somehow. Gestures are not actually enforced as it should... seems to be as ALPS had to work on without a lot of time. Synaptics would have been a much better choice.
  The driver cannot be adjusted to speed with scroll gestures and by default is AVERAGE... really ridiculous WAY to fast. In short, it is unusable for regular use. That the effects of tape, the gesture with two fingers and also the gesture of circle. He is desperately missing from a slider to change speeds. Or at least some indication of registry settings.

  Also please advice DAPS to add finger 2 tap as a regular feature in the driver. It can be used without any problem after minor registry change and it works without any problem.

  (3) in the manual NFC is listed, but I have not found ANY Z30 Z40 (Tecra) model has / contain probably the NFC module. -I've seen in some photos the flexband connector (must be for NFC) above the battery is actually present. -There will be a few spare parts (Please give me the ID number /) in the future?

  (4) smart card reader driver problem: I'm using the latest drivers and after some time and sleep (with Intel Rapid Start) the player first must be deactivated and reactivated to rework. certutil.exe - scinfo unresponsive until I have disable and re-enable the device.

  (5) I am absent in BIOS/UEFI to exclude startup devices. -This is normally a must have feature.

  I think that the user manual contain parts which refers to different models of Toshiba as Portege Z30-A/Z30t-A / Satellite Z30-A/Z30t-A

  Some models are equipped with an NFC function, but can not say with certainty what models support this feature exactly.
  It turns out that in many cases the m2 additional connector be responsible for these additional modules.

  Regarding the mode of UEFI: check if the BIOS update would add it. Some portable computers taken over this function after that the BIOS updated.

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Portege Z30 PT311E - X 11 crash on Linux Debian Jessie

  I have a Portege Z30 PT311E-01P03GIT

  The laptop works very well in dual boot with Windows 7 and Linux Debian 8.2 (Jessie).
  Under Linux, all hardware is recognized and work, but one notable problem occurs at any time, I try to open a movie from Youtube (or do the equivalent local thing).
  The Xorg server dies, killing all programs and user processes and start the KDM login prompt.

  It connect new, all continue to work until the next Youtube movie embedded in a site or things like that.

  Other than that, all the features and video modes work.
  Any help to solve this problem?

  Thank you

  Below, the initialization of the kernel dmesg messages

  Jan 25 13:39:40 core scree: Console [1.985921]: switch to the color buffer device frame 160 x 64
  Jan 25 13:39:40 Screes kernel: [1.988746] 0000:00:02.0 i915: fb0: inteldrmfb frame buffer device
  Jan 25 13:39:40 Screes kernel: [1.988763] i915 0000:00:02.0: registered declaring panic
  Jan 25 13:39:40 Screes kernel: [2.050218] ACPI: video device [GFX0] (multiple heads: Yes rom: Yes post: no)
  Jan 25 13:39:40 Screes kernel: [2.050388] input: video Bus as/devices/LNXSYSTM:00 / LNXSYBUS:00 / PNP0A08:00 / LNXVIDEO:00/input/input6
  Jan 25 13:39:40 Screes kernel: [2.050445] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

  Hello

  You can try to disable the frame buffer by adding the following for initialization arguments in GRUB

  fb = false

  Here is a non-Toshiba, not Debian related article describes some useful steps:

  http://KB.Digium.com/articles/FAQ/HO...using-problems

  I hope this helps.

  Tom BR

• Portege Z30 - I am unable to send SMS

  I have a Portege Z30-A-13F. On the previous Portege, Ericcson device shipped, I used the Toshiba Wireless Manager and the SMS from Toshiba utility in access card for messages (SMS).

  Currently, with the integrated chip of Sierra, I am able to access the network, but there is no interface for SMS on the AirCardWatcher tool.

  The Wireless Manager does not work (I think it only works with Ericsson devices).
  Is it possible to use the SMS with this computer?

  Thank you very much

  AFAIK this is regardless if the laptop supports the Ericson or the Sierra 3 G module.

  The Toshiba Wireless Manager should work fine in two modules.

  Check this document... He explains how to set up and establish a 3G connection via the Manager preinstalled Toshiba wireless.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

• Satellite vs Z30 Portege Z30

  From what I can tell (and confirmed to the Toshiba customer service) the Satellite Z30 is identical to the Portege Z30 except for the following differences:

  * The Portege Z30's Active Management Technology (AMT), which allows some administration remotely for enterprise environments
  * The Portege Z30 has a warranty of 3 years (1 year of the Satellite)
  * The Portege Z30 is pre-installed with Windows 7 and Windows 7 system restore partitions (and Windows media 8.1 provided) so that the Satellite comes pre-installed with Windows 8.1 system partitions and restore

  My question is if the roller on an image taken of installing Windows 7 from a Portege Z30 will transfer to Satellite Z30 machines? I suspect there will be no problems with the hardware, but I'm curious about Windows activation and if the SLP on Satellites key will match the Portege.

  Please be so kind and send feedback after your recovery image experience.

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• Toshiba Portege Z30 - A - Accupoint does not work

  Hey there!

  I had a problem with the Accupoint, he moved alone, so I disabled it.
  But the problem is that I have also disabled the two buttons above the key.

  A is it possible to repair the Acupoint or disable without disabling the buttons?

  I have a Toshiba Portege Z30 - A with Windows 10

  Thank you!

  AccuPoint or Trackpoint

  

  I think it's a touchpad cable problem. Send in for repair.

• Portege Z30 - A - PXE Media test failure, check cable of

  Hello everyone,
  Here's my problem: two days ago my Toshiba Portege Z30 - A turns off suddenly, and when it has reactivated the instead of displaying the usual Windows Home page at he showed a black screen with these lines written:

  'Intel(r) Boot Agent GE v1.5.43
  Copyright (C) Intel Corporation 1997-2013

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready... »

  And every time I turn it on it displays this screen again.
  Why is it like that? What should I do?

  Thank you very much
  Stefano

  It seems that the system does not recognize your ssd more. Usually, the hard/SSD is the first bootdevice and whether it is empty or does not exist, it will jump to usb or networkboot. PXE = networkboot

  Try to start with a live-stick and the check if you can access your SSD. Also see, if the bios/efi does not recognize the drive.

  Worse: all your data is lost... (I hope you have a backup)
  the positive: this question must be covered by the guarantee! If you are still in the first year and registered for the guarantee of reliability, you get your laptop repaired and all your money. xD

• Portege Z30-B-10v - internal mic stops working when I plug headphones

  I have Toshiba Portege Z30-B-10v.

  There is a problem when I plag in the internal microphone headset no longer works and I can't find possibilities how to turn it on.

  It has been found on both win7 and win10 platform

  any hint how to solve?

  THX

  B.

  somehow I know that if I have ony plugin 2/3 of jet Audio Combo jack it works this combination (external internal mic + headphones)
  but it is not acceptable

• Portege Z30 16 GB with high speed Port Replicator III and two monitors - resolution

  I have a Portege Z30 with 16 GB of Ram, connected to a Toshiba high speed Port Replicator III which is connected to two monitors running in mode extended.

  The monitor attached to the first section of the video is 1920 x 1200 running.
  However the second monitor is only show support for a maximum of 1280 x 1084.

  The monitors are identical, and both are connected by DisplayPort cables.

  I tried to lower the resolution and save the settings on the first monitor to see if it offered options on the second monitor, but the options remained the same.

  At this point, I have narrowed down to 1280 x 1024 so that it conforms to all the monitors but would like to a plus-res solution.

  Does anyone know if there is a fix/work-around for this?
  If this is a hardware limitation, has anyone tried a USB 3 to DisplayPort adapter in a similar configuration?

  Thank you!

  At the same time using two displayports?
  I wonder how it is possible, because of my knowledge it is not possible... as far as I know the Port Replicator III supports two DisplayPorts but you could choose and use one of them...

  In any case, you can use both with a lower resolution, I guess that this problem can be caused due to incompatible display drivers.
  I suggest you to uninstall reinstall or update the display drivers and check if it helps

• Fingerprints on the Portege Z30-A-12 q utility does not work

  Hello

  I need help with this issue:

  I have installed fresh windows 8.1, the same version as before, but this time I chose UEFI on BIOS. When I used the BIOS the fingerprint sensor was working fine, but now it says "unable to connect to the probe.

  I use Toshiba Portege Z30-A-12 q i5-4200 256 GB SSD, or PT243E model. I've searched the forums and found a similar problem with another Toshiba R product that was resolved by adding an exception to the firewall.

  Utility of fingerprinting with the exception of firewall, even disabled firewall all the way, but always the same problem, I added. In Device Manager, I have biometric sensors (WBF) (PID = 0010) validity under devices.

  I also checked in the BIOS to see if it it turned on and it is.
  The only thing I changed in the BIOS are Secureboot (is on) and has chosen CSM (UEFI), but I think that these settings are not relevant to the problem because they are used for starting.

  I tried to uninstall and reinstall the driver 3 times.

  Please help me with this problem.
  Thank you very much
  Andrei Colombi

  UEFI / start MSC mode has no influence on the fingerprint sensor.

  You said you did a clean install of 8.1 to win.
  I guess that the problem is related to the driver missing or utility.
  I guess you do not have all the essential software available on the Toshiba UE driver page.

  System driver Toshiba to win 8.1 must be installed. It is very important driver package.

  But also try to register fingerprints first in the Windows settings.
  Go to the control panel? Audio equipment &? Biometric devices
  To the left, click Change biometric parameters
  Now, you will see two options: WE (marked) biometrics and biometric OFF (unmarked)
  Now, go to biometric OFF and save changes
  Now go back and click on settings again biometric change
  Now return to the biometrics IT and save the changes.

  Now, you have to click on use your fingerprints with Windows and register fingerprints.

  I think it might be useful to get the utility of fingerprinting works again.

• Portege Z30 - Has is not awaken from its slumber

  One of our employees is using a Toshiba Portege Z30 - A connected to a DisplayLink Targus docking station. By default, our SOE configures power settings to do nothing when the lid closes. We have configured the laptop of this person to go to sleep when the lid closes if the notebook is on battery, and keep the default setting to do nothing if the lid closes when the supply network. About 6 weeks, the laptop has stopped waking up from his sleep.

  I don't know if the implementation of standby or try to wake up from its sleep occurred when it is connected to the sector or on battery only. What are some troubleshooting steps that we can take to help diagnose the problem? BTW, the key entry nothing on this forum site, using IE10/Windows7.

  The laptop does not wake up from sleep, open the lid or also by pressing the power button?

  What BIOS status?
  Is it already knows?

• Portege Z30 - A - Intel Rapid Storage do not work

  Hello

  Intel Quick pad do not work.
  I can enable it in the bios (4.00).
  Do you have someone has the same problem (I tried evrything: standby, hibernation, toshiba start of high-speed...)
  I think that I would not have flashed the bios to 4.00

  Where can I find the older BIOS version?

  Thank you

  My computer: Portege Z30 - A (PT241E)

  Where can I find the older BIOS version?

  Maybe this thread could be useful:
  https://Forum.Toshiba.EU/showthread.php?83449

  I can enable in the bios (4.00)

  .
  Sorry, but what do you mean exactly? This option is dimmed or is not available or what?

• How downgrade the BIOS on Portege Z30 - B?

  Hi all

  I updated the BIOS on my laptop Z30-B-119, and it is much worse than the original BIOS, so I want to downgrade it.
  There is no way to save the original BIOS during the update and the previous BIOS is not available on the site.

  Someone has the original BIOS and knows how to extract?

  Maybe someone knows how to contact Toshiba technical team directly? (Don't see what they have implemented in new BIOS, I have no hope they read on this forum or user opinions).

  If you're wondering why I want to downgrade and what's wrong with him, see below for an explanation.

  I was convinced that the new BIOS might resolve the problem with the fan, which works well too early, but it turned out they made much worse! The fan will now light at 42 °. Seized 50 °, which was already a Toshiba engineers stupid choice, provided that the side of the CPU temperature is 105 °, so that they could keep the laptop quiet at least until 60 °, especially as many people's complaint of the fan in this model. Instead, Toshiba has done the opposite and lowered the temperature even more.

  How foolish choice their engineers do, I will never buy another Toshiba and will not recommend anyone buy their products. But since I have already made the mistake one bought a Toshiba laptop, I hope that I will be able to downgrade the BIOS or contact them to request an update.

  Let me know if you know how to do it.

  Toshiba Portege Z30-B-119 PT253E - 01100XPL
  This European model belongs to the PT253E series

  The Portege Z3x - B PT253U (same model) was released in the United States and it supports the same BIOS

  The BIOS for the PT253U is compatible withE -PT253 and can be downloaded here:
  http://support.Toshiba.com/support/v...tentId=4007631