Collect newspapers - Firewall Ports

Similar Questions

• Cisco Clean Access Update website and Firewall Port required

  Hello

  I was wondering if anyone might know the site that would be to use the clean Access Manager to put as well as the required firewall port. This is due to a firewall in place. From reading, do not know if it uses another website besides as the next http://www.perfigo.com/clean_machine_1/version-se.txt on port 80.

  Thank you.

  Hello

  For CAM checks and update the rules, this is the only site required.

  HTH,

  Faisal

  --

  If you find this article useful, please note so that others can easily find the answer

• What is the best way to collect newspapers to send to Vmware

  I have ESXi 4.1

  I recently sent newspapers in support, on request, after we have a host to freeze on us.

  They responded back that newspapers have not capture anything because a restart updated newspapers and only a syslog would be able to provide clues before a crash.

  Is it true because it's strange that newspapers would be destroyed after a reboot.

  The syslog offers a challenge because we cannot control the level of gravity on the host, so we threw ourselves with a lot of useless information.

  We need the newspapers to find out why our guests are crashing and requiring us to restart.  On one occasion, we do not have vmotion virtual machines to another host.

  Once we did it, but the host did not until we rebooted it.

  What is the best way to collect newspapers send it to vmware for analysis?

  Thank you

  Falcone

  On ESXi, if you create a partition important stripe, yes the newspapers would disappear on reboot.

  Syslog is the right way to enter it.

• the iTunes 443 firewall port

  I get a mistake iTunes on the firewall and ensuring that allow port 443.  I have read other responses to a similar question and what they are talking about is way over my head!  Please let me know how to check this. Thank you

  I just let it go, and it ceased to appear.

• Required for NAC firewall ports manager manage/add the Cisco switch

  Hello

  I am trying to add switches cisco for the NAM, but I am not able to add the switch I get the error "unable to control switch" I tried opening ports 161-162 on the firwall; If I were to allow all traffic between the NAM and the switch, cisco NAM is able to add/manage the switch.

  Do not know what are the other ports may be required for cisco NAM for managing the switch?

  Thank you.

  Hello

  As far as I KNOW, only UDP 161 and 162 for SNMP communication ports must be open.

  Please make sure that you have configured the correct port on the switch:

  (config)# snmp-server host 172.16.1.61 traps version 2c cam_v2 udp-port 162 mac-notification snmp 

  If still does not, I would check the logs on the firewall for any traffic blocked between the cam and the switch.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• RV042 firewall & Port forwarding

  I install a RV042 on a SBS client network.  In the configuration, I noticed that there is a place for port forwarding where I guess I could open the smtp, http, https ports...

  But there is also access rules in the firewall section that seem to be the same, except that you can program them.

  This is, do I have to set up the two, or if only one of them, which one?

  Thanks in advance for the advice.

  Bob Showalter, Packer International

  Bob,

  You must configure the port forwarding, except if you want to specify a source and a destination that the package is granted or denied; you would then both.

  hope this helps,

  Jasbryan

• Expressway firewall ports

  Hello

  can someone point me to a last doc which are available on the deployment of the highway? I'm looking for the use of the IP Port for the firewall.

  my security guys give me wrong please help.

  Thank you sharon

  The guides you want are found here:

  Run Configuration guides Expressway

• Required for PeopleSoft Campus Solution firewall ports

  Dear gurus,

  We are using PeopleSoft Campus Solution and running on Windows Server 2008 R2. Now, we are working on the conduct of firewall does so we can allow only the required ports for the application to work. Could you please tell what are the ports required on the demand side?

  Thank you.

  Only two ports is required to open the firewall if you use SSL and NON SSL via internet.

  Assume that your Web server uses port 80 and 443 for SSL and Non SSL respectively. Then, you need to open these 2 ports in the firewall.

  Hope that helps.

  P.S. Please check reply as an useful answer or appropriate so that it is useful for others who have the same issues. @

• The 113 Windows Firewall port

  Hello

  I connect to several network devices using telnet, ssh, and ftp.
  If I activate the Windows Firewall connects it to take about 10-15 seconds to reach. If I disable the firewall it is instantaneous.
  What I've read I need to allow TCP Port 113 (auth / ident) to pass the firewall Windows may reject it properly.
  I added a new rule for Port 113 and rebooted, but I still have the same question.
  If I turn off the firewall, it works fine, so I know there is not no process running on my PC which interacts with port 113.
  In windows 8 I got this problem and never solved so I installed ZoneAlarm which has worked well and I have no problem connecting.
  Now, I've upgraded to Windows 8.1 this problem is back and ZoneAlram is not supported.
  
  A certain offer any advise how it opens correctly on the firewall and if there is anything else I need to do.
  Thank you

  No do you have ideas on this?

  I tried to add inbound and outbound allow rule of traffic, I tried a block but neither seems to help.
  Disable the firewall, it works very well!
   

• Custom Firewall Ports?

  Im trying to open ports in the firewall and I don't see any way to add them.  Is it not possible to add custom ports?

  Also, I noticed that the ports in the firewall can be limited to specific IP addresses. If I put a host name (for example, dns) entry in the field of IP dynamic?

  Try these links.

  VMware KB: Creation of custom in VMware ESXi 5.0 firewall rules

  virtuallyGhetto: how to create custom in ESXi 5.0 firewall rules

• Required for ESXi firewall ports

  I intend to place a single ESXi host in our DMZ.

  I need to check which ports must be open on the internal firewall to manage this host.  That's what I have so far:

  443 two-way - to access the vsphere client

  two-way 902 and 903 - Access console via vsphere client

  22 - for use with SSH management

  Anything else?

  All I really need is to be able to connect via vsphere client and perform management tasks typicall and view of the virtual machine and SSH remote if necessary consoles.

  Thank you!

  Yes, I think that this will go well. Unless you are already aware, take a look at http://www.vreference.com/firewall-diagram/ for a good overview of the various ports.

  André

  PS: You have access to an NTP server in the DMZ?

• Should what firewall port I open to the Cloud from Adobe?

  We want to use the Adobe Premiere Pro but could not get through the cloud of Adobe because of network problems (error message 'server not found')

  So which port of the firewall that we have to open to allow traffic to go to Adobe cloud?

  Also is it possible to upgrade the software to use IE proxy rather than drive to the internet directly?

  Thank you

  I'm not the best person to answer, I ask you to contact you the Support from Adobe Contact | Adobe

  I'm also moving the post to the download & install

  Concerning

  Baudier

• PCoIP firewall ports

  I am under an environment of vmware view here and we have a pool with a few remote workstations that are used by system admins when they are working remotely or on-call incident response.  For security reasons, we have our servers segmented by VLANS and highly protected through Firewall (i.e. all traffic off the server WHAT VLAN is blocked explicitly).  For this reason, I seem to have a problem with is client vmware view to connect to remote workstations (inside the local network VIRTUAL server) via PCoIP.  I'm sure it's a firewall issue, because I can connect via RDP (ports that are open in the firewall) and I put temporarily in a rule to allow all traffic to the IP addresses of the remote workstations, which allowed me to connect through PCoIP, but immediately after the deactivation of this rule I have once more not connect through PCoIP.  Of course, the solution seems to be to open the ports of PCoIP remote work station, but after scouring the internets yesterday that I couldn't get a full list of ports, I need to open.  I looked at the article here http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1027217 and opening just tried these specific ports, but I still not can connect.  Someone at - it a complete list of ports to open?  I don't want to create a rule to open all ports for these machines.  Thanks in advance

  Suiname wrote:

  I forgot to mention that I am using view 5 and discovers not 4.6, I wonder if this changes anything in the ports that use the Protocol or implementation of PCoIP remote access.

  The same goes for 4.6, 5.0 and 5.1.

  Linjo is correct. For PCoIP is 4172 TCP and UDP 4172.

  Step 3 here described. http://communities.VMware.com/docs/doc-14974

  If you block PCoIP PCoIP fails and you will get a black screen for a few seconds, followed by a break.

  Run Wireshark on the Security server if it would help. You will see this traffic PCoIP.

  Let us know what it was. Thank you.

  Mark

• PowerCLI firewall ports

  If I have a vCenter behind a firewall and you want to run scripts of powercli against it from outside the firewall, what ports are must be open? should I use 443 for hitting vCenter?

  FYI this is on a private network, so I don't have access to a virtual circuit on the internet, is a network of internel firewall.

  I think Yes, because these cmdlets use the VIX which is installed on the client when you run the scripts.

• Open a custom through ESX firewall port

  Hi all

  I need allow a custom port opened through the firewall ESX I put a management agent to the storage on the host computer. Although when I go to the 'security' profile and you are trying to add the port I do not seem to have an option to do this.

  Any ideas.

  Thank you

  David

  Coud you use esxcfg-firewall:

  esxcfg-firewall - openPort xxxx, tcp, in, name

  esxcfg-firewall - openPort xxxx, tcp, out, name

  where xxxx is your port and "name", that's what you want to call the service