Color Laserjet 2605dn do not print in b & W

Similar Questions

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• HP Color LaserJet 2605dn: 2605 HP prints in black

  After changing a blue and yellow cartridge, printer flashing but not print and not of documents in the print queue. NVRAM and Super NVRAM but still wouldn't print.  Configuration of network in the menu report (I'm not on a network, just a USB port on my computer) and supplies Status Page printed fine.  Tried rebooting, uninstalling and reinstalling anything does not. After trying to reports menu print a text page simple and solid black on 90% of the page was printed, no text.  After a few minutes, printer would print a blank page with only the following on this subject: GET /DevMgmt/DiscoveryTree.xml HTTP/1.1 Host: 127.0.0.1:8080.

  I looked at the pdf page to reset but return of my printer does not match the pdf page and I could not find any hole or test switch.

  It was working fine!  Until I changed two cartridges and the black cartridge is still 3/4 full.  I read on other posts on scanners goes wrong, but this seems very strange to happen suddenly after just changing the cartridge.  Can anyone suggest something before you buy a new printer.  Thank you.

  Update on the problem - the cause is not identified and I can assume only it had something to do with the Windows operating system rather than a fatal accident of mechanics in the printer.

  I was out of town for a week, the printer was not hooked; and I bought another printer HP in the meantime to be able to print (LaserJet Pro 400 which I am extremely satisfied).  HP support person called me on my cell phone while I was traveling and I asked that he call me when I'll be back and he said it would be and gave me a date and a time so I'd be available.  In anticipation of his call, when I got home, I connected the printer to my Win 7 Home laptop (64 bit) to test and it printed without fail!  No sign of the original problem.

  So what - the?  Some driver in Windows suddenly Act?  Who knows.  But the printer print documents and photos with no sign of problem.  So maybe a solution to some printer problems is unplug the printer, don't use it for a few days, plug it again and see if the problem recurrs.

  In the meantime, I am so happy with the b & w LaserJet Pro 400 that it became my main printer and I'm reserving the color HP 2605 for instances when I need color.

  Consider my problem solved unless I am writing again she reappears!

• HP Color Laserjet CP2025 does not print the colors in the document

  Original title: print film

  I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

  Hi DirkjeAbma,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3 color printing fails all printing applications?

  You can see the following HP support article and check if it helps to solve the problem:

  HP Color LaserJet CP2020 printer - image quality problems

  You can also read the following article and check:

  How can I check my ink or toner levels?

  Hope this information is useful.

• Color Laserjet CP1518 will not print in color

  XP SP3 usb connected.

  I found other troubleshooting solutions. Namely, that where the solution is to uncheck "print in grayscale".  I don't see this option on one of the property tabs.

  The 1518 has been in service for months, maybe more than a year.  Had some problems with it not behave like a printer and would remove and reinstall through control-> printers/Fax Panel.

  Tried again with this instance, nothing helps.   Color toner supplies are all over 80% - and print supply page in the menu of the printer _does_ color print.  Fact page of toners 'Colorsphere.

  Any jobs sent to the printer, with elements of color, prints in grayscale.  The printer is shared through the connected usb XP machine.  network printing also does not print in color

  A search of this forum did not turn anything for this situation.  If anyone can provide a link to the query (solved) of another user or perhaps an explanation for changing the appropriate printer property to start printing in color once again I certainly appreciate it.

  Thank you.

  A solution of sorts.  I'll post here so when it happens again in a year and my addled brain can't remember, maybe that I'll find myself here.

  At HP, I downloaded the printer driver.  These are apparently "universal."  Deleted the XP printer and it - he added point to the level of the 8-12 different folder with .inf files that I had just downloaded.  No idea which one to use.  And apparently not so universal that HP would have you believe.  I presume that one I chose (proabably the first alphabetically) only allows gray - or is gray universal for printers.

  Well, rather than waiting on the long tail of wisdom on this forum I tried a reset hot of the printer (pull the plug while its on and wait 15 seconds).

  did.  tried to print (in excel the view print used to always display in color and he wasn't yet). There not also to print in color.  However in the meantime that the print job, I noticed that my "equipment was ready for use.

  Checked the printer and found a new listed HP cp1518ni.  has chosen to print in excel and the preview showed in color and voila! print color too.

  I've never cared for lack of HP of discrimination re: printer drivers 'universal '.  At least, they should give more guidance on which .inf to use _if_, you're going to be looking forward and install it yourself.

  However, I am impressed XP and HP got the correct auto-install.

• Color LaserJet 2605 does not print

  My ColorLaserJet 2605 was printing very well - I finished work, then fed the following work and therefore, everything he says "print document" with the green light flashing - but nothing ever prints! I rebooted, reinstalled, nothing changes - it lights, initializes, said it's "Ready", and then when I try to print a 1 page, simple text without color or photos document, I get the same situation of non-printing - saying the document print, but nothing prints ever. Any suggestions? Thanks in advance! Aggie 55

  First, go to the reports menu on the printer and see if you can print a configuration page. If it works, check your driver. If this does not work, then you can be problems to trainer.

• Color laserjet CP1525nw will not print in color

  I installed the PCL6 and PostScript drivers on my Surface Pro 3 to print to my LaserJet CP1525nw color.  The printer is connected to my router.  The printer prints, but only in shades of gray.  What can I do to be able to print in color and continue to print through my router?

  My printer is connected via USB. I installed the full version of the software, and everything works now. Thank you!

• HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

  Hello

  Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

  It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

  Any suggestions?

  Thank you!

  Hi, thanks to send additional information.  It really helped.

  The following is taken from the User Guide which can be found here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

  The message that users see is a Media fast charge.

  On Page 198, there is a section on the message they see.  It also includes measures to address the message.

  

  It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

  For step 2 to verify the media guides see page 97: "setting up trays of food.

  When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

  You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

  Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

  What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

  Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

  (Edited to remove extra lines)

• Color LaserJet 2605dn printing black and white only

  I have a Color Laserjet 2605dn, and all of the color ink cartridges have run dry. However the black cartridge has more than 2,000 pages of ink in the printer and it won't let me prink only black and white. It seems that the color cartridges must also have ink in them so that the printer to print. Does anyone know a work around so that I can print with the black cartridge and not buy color cartridges?

  Hello

  Thanks for the post.  I have attached a link below that can help.  Good luck!

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 110 & prodSeriesId = 1140727 & prodTypeId = 18972 & prodSeriesId = 1140727 & objectid = c00660239

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• HP color laserjet 2605dn printer

  The HP COLOR LASERJET 2605dn PRINTER is compatible with Windows 10?

  HP LaserJet 2605dn printer range is compatible with Windows 10. Check below link for compatibility
  http://www.Microsoft.com/en-in/Windows/compatibility/CompatCenter/ProductDetailsViewer?name=HP%20LaserJet%202605dn%20Laser%20Printer & vendor = HP & local is 1033% 2C3081% 2C4105% 2C16393 & ModelOrVersion is Q7822A & BreadCrumbPath = 2605dn % 20 & LastSearchTerm = 2605dn %2 B & Type = Hardware, & tempOsid = Windows % 2010

  You can download drivers install n the link below:
  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=1140730 & swLangOid = 8 & swEnvOid = 4191

• For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  Hello DavePerdue,

  Thank you for your message.  Click HERE for your driver from the HP website.  It seems that it just took some time to get the driver online and available for download.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet 2700n do not print in color since the update of win8.1

  my printer does not print in color from my computer updated to win8.1/64 bit.

  the pilot is hp color laserjet 2700 class pcl6 driver upd pcl6 which is a universal printer driver.

  the message "cannot communicate with color lserjet 2700. I've tried different usb ports, cables checked. all color cartridges have more than 50% left.

  a testpage initiated on the printer was printed in color.

  I solved my problem by installing color laserjet 3000. Now printing is again in color.

  It must be a driver for 2700 problem.

• HP Color Laserjet Pro M252 - not to print a PDF file

  Hey Adobe Forum,

  I have a problem with a M252 Pro of Laserjet of color HP which will not print all PDF documents. When you try to print a PDF file, the document is idling to "print...". ».

  Information about the current configuration:

  1. the customer is on a Windows 7, 64-bit workstation.

  2. the pilot is the last on the site - HP Color Laseret M252 PCL6. I tried the PCL5, PS and HP universal printer drivers.

  3. the printer has been added as a local printer TCP/IP (10.45.157.31/24) and a shared printer from the server. The two did not work.

  4. the workstation has Adobe Reader X installed the latest updates. The upgrade of the revision to XI or higher version is not an option.

  5 other files can be printed such as images and Microsoft Word documents.

  6. I tried setting Adobe for 'Print As Image '; It did make a difference.

  If anyone has any suggestions, please let me know.

  Thank you

  Max

  It turns out that, the question not print was the result of an incompatibility of duplex on the switch port to which it was connected. I tried an administrator account that does not correct the problem. Print jobs were still sitting in the queue up to 5 minutes after selecting printing. A PDF file passes finally after minutes of waiting, but was cancelled by users after assuming it was the slightest error / stuck.

  When checking switch, there was a lot of duplex mismatch errors in newspapers. Double-sided printing has been on before auto however there may be problems with automatic duplex printing. I put the port 100 Mbit/s/full that if it is in offline mode. I put it at 10 Mbit/s/full and it came online and all problems solved.

  Thank you for your help.

  Max.

• HP Color LaserJet 2605dn

  I have a HP Color LaserJet 2605dn. It worked very well with the Microsoft Vista operating system. I just bought a computer with operating system Windows 8 home and now my printer won't do the double sided printed (not the manual double-sided, but printing double-sided on its own). Is there a driver out there who can help with this? Your Web site was an option for Windows 8 when looking for drivers.

  The default value is the duplexer is set to "not installed".  Go to the devices folder and printers, right click on the 2605, select printer properties, the device settings and set theduplex "installed" unit, apply.