HP Color LaserJet 3600n Laser printer

Similar Questions

• HP Color LaserJet 1600 Laser printer does not

  After I installed Windows 7 instead of Vista on a 64-bit HP laptop, I had problems with my printer (HP Color LaserJet 1600 Laser Printer).  The test page works well, but some applications, such as the Windows Photo Viewer that comes with Windows 7, produce nothing but totally black pages when I try to print photos (it's black, not white).  The strange thing is that, if I insert a picture in a Microsoft Word 2007 page, it prints well!  In addition, other applications are unable to make use of the printer, such as Adobe Reader 9 and Adobe Photoshop Elements 7, who refuse to recognize the printer.  Is this a known issue with a solution?

  Hello

  I suggest you to follow the methods and check.

  Method 01:

  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 02:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Is the hp color laserjet 3600n clouds print-compatible?

  try to connect my printer to print cloud. I have windows vista

  Hello

  Looks like a no, I can't find it in the following list:

  http://support.HP.com/us-en/document/c02814760

  You can check again.

• HP Color LaserJet 3800 Laser printer

  Cannot print multiple copies of a file of any software

  Hello

  The feedback Forum is for feedback on the Forums for answers.

  You should ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  Also we need more information to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ---------------------------------------

  You need to contact HP support, check their online documentation and drivers and ask questions about known
  questions in the Forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

  using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

  I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

  Please consider trying this as a possible solution:

  (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

  One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

  After installation, try printing again.

  The output I have indicates it will print is more negative.  Please let me know if you have success.

  One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

• need printer driver for HP Color LaserJet 3600n running Windows 8

  Need printer driver for HP Color LaserJet 3600n running Windows 8

  Click Next if you Win 8 pro 64-bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&TaskID=135&swEnvOID=4132

• Windows 7 and HP Color LaserJet 3600N

  HP did better still.  No Windows 7 for Color LaserJet 3600n driver!  You can fill in the blanks...   However, using Windows 7 Professional, I could install the XP drivers.   Download software XP and it runs in a virtual XP session.  I then added the printer as Windows 7 would cause you to do.   The add-in has not completed correctly - CTRL/ALT/DELETE.  However, the printer has been added, and it seems to work.   Maybe HP and Microsoft are pushing the broader Windows 7 Professional.

  Hello world

  Download and install the software the complete solution for this printer on the link below.

  Complete software solution for the HP Color LaserJet printer series 3600

  HP LaserJet - support Windows 7

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• I'm getting white gaps between the black contour lines and color fill on laser printer

  I'm getting white gaps between the black contour lines and color fill on laser printer

  You're welcome, Calotypist.

  Illy prefer PostScript because it gives you a reliable/complete (more) reproduction (depending on the version, you can also see (more) complete print failure).

  With a PDF basically tell you the printer where to put the points/tasks. Without it, the printer (pilot) has to figure (some) outside.

  If you can get one for the printer in question, a printer PostScript (emulation) driver will leave you direct printing.

• Yosemite and hp printer color laserjet 3600n hp office jet pro 8600

  Hello

  I've updated the maverick at yosemite. The last update for the printer software has been installed (version 3.0 on October 1, 2014). But both printers not working anymore.

  Color laser jet 3600n stops after 10% of printing with the PCL XL, subsystem kernel error, error: data, missing operator: sole source, post 14.

  With the OfficeJet Pro 8600, it is quite similar. The printer starts loadin page. After a few minutes the printer push the empty pages. In both cases the Mac lost the connection to the printer for a while. After a few minutes the connection is established.

  The system is OSX Yosemite 10.10

  Color LaserJet 3600 driver version 2.0.3

  connected to the cable / Hello

  Serial number [personal information deleted]

  number of Procuct Q5987A

  OfficeJet Pro 8600 N911a

  connected without wire/Hello

  FW-version CLP1CN1322CR

  Serial number [personal information deleted]

  driver HP Officejet Pro 8600 2.0 version

  Product CM749A number

  Information device of the HP utility software.

  A response in the German forum was helpful:

  • reset the printing system
  • Reinstall the printer HP (HPPrintDriver3.0.dmg) update
  • restore volume access rights,
  • Restart the system and
  • Reinstall the printers

  After that, the two printers works previous.

• Color Laserjet 3600n does ' t print. Message "looking for printer." New ethernet cable - no improvisation

  Color Laserjet 3600 n does not print. "Looking for printer" message in the printer window. Tried the new ethernet cable-no improvement. Printer turned, restarted the computer and enabled printer back - no differrence.

  Internet works fine. Help, please!

  The software update referenced actually comes from Apple.  If it's not showin your software updates Apple, then you can manually download it here:

  http://support.Apple.com/kb/DL907

• Color LaserJet 2600n: uneven printing CLJ 2600n

  I recently had an opportunity Color LaserJet 2600n and inside it was a MESS! I have it cleaned and replaced all four cartridges of toner with new HP OEM units and it is printing enough now. But, if you look at the thescan of the page supplies below you can see two of the colors fade out as it goes further to the left (yellow and Magenta).

  I went through the service manual and can not see any sort of adjustment for cartridges of toner, ETB or merger. I know that old need to replace toner cartridges (I think they used a type of charging service since two of them were on the run and one was a brand of Office Depot).

  I'm really not only to replace the parts in the hope he can fix it. Someone has an idea if it is a question EBT or fusion? Perhaps another part or adjustment?

  Thanks in advance!

  Larry.

  

  Larry, this is a known issue with the scanner Assembly laser. The good news for you is that it can be fixed by cleaning, but there are some necessary disassembly. You should be able to find instructions online to document the process to disassemble the printer, removing laser Assembly, cleaning of optics in it.

  I did once and it was relatively easy, but you don't need a little space to put parts on and little patience.

• Color Laserjet pro m252dw: print off center

  My printer prints slightly biased (as too far to the right). I did the alignment test and tried to solve the problem by adjusting printing to several mm to the left, but it does not work. I am trying to print labels with graphics that contain a border of circle-because the page is printing off center seem no good labels. I print on sticker paper for labels and have used several different programs label to print from, and all have the same resulf of centred off the coast. Any suggestions? Help would be very appreciated!

  Hey @OldSoulA,

  Welcome to the Forums of HP Support!

  I understand that you have a problem of quality when printing labels from your computer Windows 8.1 to your HP Color LaserJet Pro M252dw. I would like to help you today with this problem of printing the label. Thank you for all the troubleshooting steps you tried before reaching out for support. At this point, I'm going to make sure that the labels that you are printing on conform to the specifications of your HP Laserjet Printer. Once you confirm that the labels you are using are supported, we will miss some tests in order to check if this central issue is caused by the type of paper or a problem of setting. Please follow the steps below.

  Step 1: Check paper:

  According to the specifications of your HP Laserjet Printer, the following labels are supported:

  

  • You can load up to 50 sheets of labels into the tray at 1 time. Do not exceed 50 sheets
  • Avoid mixing media into the tray with paper. Avoid labels on top of plain white paper in your loading tray
  • Avoid using labels that are separated from the backing sheet, wrinkled or damaged in any way
  • Do not use labels that have exposed the carrier sheet
  • Do power not more than once a sheet of labels into the printer
  • Avoid printing on both sides of the labels
  • Avoid printing on sheets which the labels have been removed
  • Make sure that you use the specific Laser as adhesive labels can damage internal components in your machine.

  Once you have confirmed that the paper of the label that you are using is meet the specifications of your printer can you please move to the next step.

  Step 2: Print Self Test:

  1. Load of the plain white paper in your paper tray
  2. On the front panel of your printer then drag your finger to the left and select configuration
  3. Under the menu Setup touch Service
  4. Tap the cleaning Page
  5. Print a cleaning Page now. This page should show the colored lines centered

  Check the alignment of the present report.

  • The colored lines appear centered?
  • Printing documents from your computer on plain white paper print centered?

  Please reply to this message with the result of your troubleshooting so far. Once I have the results of your troubleshooting with the answers to my questions above, I'll be more than happy to provide additional assistance for this problem. I look forward to hear from you!

• HP Color LaserJet 4600 PS: Driver HP Color LaserJet 4600 PS printer Windows Server R2 2012 problem

  Hello team HP,

  We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.

  But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.

  Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?

  If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?

  Help us to this problem as soon as POSSIBLE and its very high priority for us.

  Kind regards

  Gaudin. B

  Hello

  CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.

  Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD

  Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141

  Thank you

• Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

  I have a Color LaserJet 2600n, on which I replaced both magenta and yellow cartridges a week ago. Both cartridges are genuine HP. The printer cleaned and calibrated.

  Today, the thin magenta strips about 3 "apart began to appear on my printed pages. Print pages, but there is a 'click' stable, audible about 2 seconds apart from from the inside of the printer. Even after a cleaning several times, the bands are less bright, but they are still there. They also appear on the printed test page and on the page of troubleshooting print quality. Is there something wrong with this new magenta cartridge? This problem has never happened before in the 6 years, I've owned this printer.

  Here a link to the document that addresses the issues of print quality for your printer model. It will give you the different troubleshooting steps to try to resolve the problem. One of the steps in the document will guide on inspecting the print cartridge and see if the replacement is in order. I hope this helps.