community issues beta vSAN

Similar Questions

• Critical update to correct a PC Printer Communication issue

  FYI, HP has released a critical update to correct a PC Printer Communication issue a certain printers. So far, he is named for Photosmart C4400, C4500, C5500 and C6300. A specific connection type has not been specified, then it may be for the two USB and network printers. Download it from the link below.

  Exit the: 2009-01-25
  Version: 1.0
  Compatibility: Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Vista Business (64-bit), Microsoft Windows Vista Ultimate (64-bit), Microsoft Windows Vista (64-bit), Microsoft Windows Vista Ultimate (32-bit), Microsoft Windows Vista Home Premium (64-bit), Microsoft Windows Vista Home Basic (64-bit), Microsoft Windows Vista Business (32-bit), Microsoft Windows Vista Business (32-bit), Microsoft Windows Vista Enterprise (64-bit) , Microsoft Windows Vista Home Basic (32-bit), Microsoft Windows Vista Home Premium (32-bit), Microsoft Windows XP 64 - Bit Edition

  Requirements: must have an existing installation of the device for which this update is meant. This update cannot be used for installation of the original equipment.

  Description: This update fixes a problem that may cause the computer lose connection with your printer, which may result in incomplete print jobs and loss of status messaging printer.

  Improvements: This update fixes a problem that may cause the computer lose connection with your printer, which may result in incomplete print jobs and loss of status messaging printer.

  CLICK HERE

  Hello

  Just thought that I would let you know that it worked for my C-4480.

  I got it for a few months and the power button wouldn't do her off and when short paper, he did nothing, and nothing worked except pulling on the power cord.

  Now for the first time, the window with the out of paper message and showed the message ok to hit the button and continue.

  I can also turn it off using the power button.

  So, it does not.

  Thank you

  Vittles

• Communication issues and windows Wireless.

  Hello

  Please how can I switch on my communication wireless in the Config Free?
  Mine offers a solution (c1), but I put t know what he meant by c1 and how do I install IIS on my windows, I got a Xp home edition?
  I tried formatting and installing Xp Pro, but I couldn't t.
  Please can someone help me with this problem?

  Then another thing: I like mine, processor Intel Celeron M 1.6GHz and 512 MB, 40 GB.
  If you like what the best level and the highest upgrade, I can give this laptop to improve performance because I intend to run a web server and server of internet mapping to this topic?

  Thank you very much.

  The wireless is enabled by moving a switch located on the side of the laptop, your laptop is "active wifi. Some Toshiba models are not active wifi even if they switch to check the manual and specifications of your laptop.

  Once you have activated the following switch you will have to setup a connection you have a router or access point wireless. Create a new connection with the Network Wizard, scan the airwaves for your network (SSID) and enter any password (WEP) security you have enabled. After that your wireless connection should stay relatively automatic whenever you log in and log out of Windows :)

  Richard S.

• GPIB-USB-HS and USB-8451 communication issues - appearing only in VISA

  Hello

  I recently started a new job and have had communication problems between my adapter GPIB-USB-HS, my VISA or MAX-Labview and USB-8451 I2C/SPI interface.  I installed LabView to 32 bits, OR-488. 2, the driver for the 8451 on my windows desktop and VISA 16.0 7.

  In the windows Device Manager, the 8451 appears as a device USB of NI-VISA and Gbspecifications FOR-USB-HS presents itself as a GPIB Interface of NOR.  Two of these instruments are recognized NI Max so but communication Gbspecifications FOR add-in adapter (and connected instruments) fails and he can't find the instruments and the self-test fails with a hardware error unknown gpib (-37052).  The watch also neither device VISA Interactive Control.

  The ready light is lit on the GPIB-USB adapter and the 8451 flashes green as if nothing is wrong at the end.  I uninstalled all the software of NOR and reinstalled, and I run MAX as an administrator.  Is there possibly some computer settings I could neglect or need to change to open a communication?  Any other ideas on why I can't communicate with devices?

  Thank you!

  Trey

  This is a device-Lock software that my it was preinstalled on the computer blocks the USB port.  SHE has added features like confidence, and now it works.

• Lumenera Infinity 2 camera Communication issues

  Hello National Community Instruments,

  I am trying to get a 2 Lumenera Infinity camera to work with LabVIEW.
  I downloaded the http://www.lumenera.com/support/downloads/microscopy-downloads.php sheet

  I also downloaded NI Vision with its pilots IMAQdx and IMAQ according to needs.
  However, whenever I try to load an example, or even to add a block of program it starts asking for NILuAPI.dll
  This file does not exist in the plug in.
  I was wondering if anyone had experienced this or if it was just a case of a file with the incorrect path.

  Solution?
  It was a little confusing that request since they refer to National Instruments when it comes to LabVIEW.
  However, talking to Lumenera was the right path.
  For my particular problem, the NILuAPI.dll file, on what he asked was missing in the standard download.
  You must request this Lumenera and also be sure to ask for the 32-bit or the 64-bit version, according to which matches your version.
  Then move the folder of Lumenara (LuCam) of inst.lib in LabVIEW 2010 (by default it's made)

  and move ot the inst.lib in 2011 (or whichever is yours).

  (this is for the 64-bit version only)
  Finally and above all to move the NILuAPI file in the Windows System32 folder which is located under C:

  Then try opening an example of the LuCam folder.
  Everything should load successfully.

• Communication issues in Windows 7 with the XBOX 360

  I also have the problem of my windows premium 7, refusing to talk to my xbox 360...< not="" the="" controller's..="" it="" talks="" to="" them="" fine="">

  But the Xbox itself on the other side ot the network...

  So please don't tell me to install controller drivers...

  Really do not do...

  Yes, I've read hundreds of times people have asked this very question.

  To always have the microlimp people answer with «just install the controller driver and everything'll be fine...»  You want a pill with this useless response? »

  My very expensive windows 7 gaming machine speaks to everything perfectly. Everything there is certified to work with windows... Nothing is no name made in China...

  And apparently the xbox slim is certified...

  Then why they will not speak to each other...

  The windows updates did not have a pilot.

  I tried the controller driver... It did not help at all...

  So please don't just tell me to install the controller driver...

  And maybe think about why we shouldn't just scrap xbox and get a media center that works?

  Hell I already used my Roku as well as the xbox...

  He and my windows machine 7 talk to each other with happiness...

  Original title: windows 7 driver driver to talk to an xbox 360.  Do not use the controller with a windows machine...

  Hello

  Thanks for the update on the issue. The query you requested is best suited to be posted on the Xbox forum. He is watched by other computing professionals who would be more likely to help you.

  Forum on the Xbox:

  http://forums.Xbox.com/xbox_forums/default.aspx

  Hope this information was useful.

• GUI display in 2504 WLC on 8.3.102.0 problems and communication issues

  I had to take two of my WLC 2504 version 8.3.102.0 code to support the APs news with domain B. The WLC came with 7.6 which is postponed, so I tried both versions of ED last 8.2 and 8.3, but then the GUI is almost unusable. I can only reliable get in on the CLI but users at this location use the graphical interface of surveillance. Are there changes in the settings of browser required for the GUI work reliably?

  It's a problem with only a few of our controllers running 8.0 or 8.2. In general, I use Firefox like Chrome has this issue with me. IE and Edge seems to works fine too, but prefer Firefox. Any code your race to be honest. We always can understand this except to refresh the browser.  I run 8.3 at home and I have not touched any GUI question still.

  -Scott

  Please evaluate the useful messages *.

• Serial Communication issue - packed LabVIEW library used in the Scripts of TestStand

  Hello

  I have developed a RS422 driver in LabVIEW for the basic operation is as initialize, reading, writing, closing etc. Later I used it as a library wrapped in TestStand scripts.

  The question is, when I try to read the answer to one of the command, I am able to observe it in the iteration 6th step of reading, where I'm supposed to read for the first time.

  Please suggest any ideas on what could be the reason.

  You need to know if the response data really who arrives late, after giving a command or the VI you wrote is not able to capture the correct data.

  If you have a recorder RS 422 or bus Analyzer then it will be easy to analyze the cause.

  Since you are able to read step 6 on reading a few questions:

  You are still able to read on the 6th read-only? If yes then probably the target USE responds slowly to this command or it sends too much unnecessary data that are read by the 5 first readings. (depends on your reading algorithm).

  Playback vi must be written such that it will be in a loop (with some time out) until it gets the required data. The expiration time should be configurable.

  Also before sending the order you must ensure that the buffer is empty (rinsed).

  I hope this helps.

  Ravi

• steam community issues and browser

  Why is steam not connecting not when my friends connect their computers but when it's just my computer there is no problem

  Hello

  1. which version of the Windows operating system is installed on the computer?

  2 when was the last time it was working fine?

  3. do you receive any error messages?

  4 did you a recent software or changes to the material on the computer?

  Provide us with more information so that we are able to help you the best.

  See also:

  Troubleshooting of network connectivity

  https://support.steampowered.com/kb_article.php?ref=1456-EUDN-2493

• Issue of recovery event

  I noticed that the health of sensor on IPS showing 'critical '.

  And I clicked for details, he showed that the recovery of the event is not recovered and critical now. I don't know what that means.

  Can someone tell me what are the causes that information, and how to fix it?

  Hello

  In this case, the recovery of this event can be ignored as mentioned in the last answer. You need IME to pull events.  It isn't causing any trouble.

   As we know IDM cannot pull events from the IPS/AIP directly and we will need IME for that, so if the events were not polled for an amount of time (default of 300 for yellow status) and (default of 600 sec for RED), the event status will change colors. So it's either Event Retrieval is enabled and the IME is not installed, hence no events are being polled, then this error can be ignored and the event polling can be disabled safely (un-check the Event Retrieval checkbox), OR the IME is not operating as it should and there might be communication issue between the device and the IME.

  Please let me know if you have additional questions on this. If this answers your query, I'll ask select answer as the solution for this thread.

  Kind regards.

  Akshay Rouanet

• NSX - Ping issues between DLR and edge gateway on the network of public transport

  Hello

  I have deployed an NSX in a POC environment and have a few weird questions. I sent a distributed router (DLR) with 2 internal interfaces (related to the segments of NW app & web) and an uplink interface connected to a network of transit (192.168.10.0/29). I have also deployed a gateway of Edge services with an internal link connected to the same interface of transit (192.168.10.0/29) and an interface of uplink connected to the outside world.

  The question is, when I PuTTY on the Edge service gateway and ping interface uplink of the DLR using sound transit (192.168.10.2) network ip address, I do not get a response. The firewall is configured to accept all traffic on the DLR and the edge.

  Someone at - it ideas? Note that the DLR has been configured default gateway pointing to the IP of the gateway of the Edge on the network of public transport (as is the only North DLR connection)

  See you soon

  A rough drawing of the topology is attached. Ping fails to 192.168.10.1 to 192.168.10.2

  FYI - has proved to be a problem with the NSX 6.1.2 that attaches to 6.1.3. No KB for the issue for the time being, nor is he mentioned as being fixed at 6.1.3 in the notes but VMware engineer GSS confirmed that its fixed.

  temporary work is about to stop and start the daemon netcpa on the compute cluster hosts & edge of ESXi

  See more details on my blog http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/

• Problems with signature Muse beta Web site

  I am a member of the community of beta of Muse at museprerelease.com. I was able to connect until about a week ago. Now when I go to museprerelease.com and get redirected to a login page Adobe and enter my credentials, I get redirected to sso.museprerelease.com/signin.html. I can connect to the Web site of Adobe and Muse software, but this is just the beta community that I can not connect to. This happens in the browser Chrome and Safari. I also had the same problem when I tried to sign in with a different account. I tried to get help from the cat Adobe support and they directed me to the helpline and then I was directed to another agent, and then he said to ask about it on the forum. If anyone an idea what is happening?

  Can you please email me at [email protected]? Since it is on the beta forums, we cannot discuss in public forums. Thank you

• The community edition error message sign

  I get error message there is no document template for the e-mail (Adobe ID) you provided. Please contact [email protected]. when running Adobe Community Publishing (Beta), I can't sign in.

  Hi, Bojan,

  I apologize for the confusion this has caused.  We have removed the Community Publishing application.  You can no longer use the AIR app on your computer to create and edit documents.

  All of the content that you have created will still be available on Adobe.com.

  Kirsti

  Community team help & Learning

• Block a web site

  I want to stop a particular website to contact me by email.

  Some e-mail providers to block or even sort
  incoming mail. Check with your email provider.

  On your blocking of websites;

  Adblock more {web link}
  Blocks annoying video ads on YouTube, Facebook ads, banners
  and much more. Adblock Plus blocks all the annoying ads, and
  supports Web sites by blocking is not discrete (configurable) default ads.

  BlockSite {web link}
  BlockSite is an extension, which automagically blocks websites
  of your choice. In addition, this extension will disable all
  hyperlinks to these sites, simply displaying the text of the link
  without the feature by clicking on.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Garmin Communicator plugin 4.2.0.0
  Garmin Communicator plugin BETA 4.2.0.0

  Having multiple versions of a program can cause problems.

• Reactivated my computer with muted and all I get is a song play more and more, can not hear anything else.

  Original title: music

  I used my sound muted.  I had something that I needed to listen to the sound but when i not cut the sound there is a song that plays again and again... you don't hear anything else.  How can I disable this...

  Hi Kathy,

  From the description you have provided, it appears that there is a program (most likely a music player or a browser that has a tab open playing multimedia content) that runs in the background in the computer at the time where you encountered this problem. Sometimes when you open Web sites in a browser, they automatically open certain pop-up windows that keeps the game ads. It could be like a local browser window as well.

  So that the community to better help you, you will need to provide some information on your computer. I put a few questions below, answer please:

  1. What is the operating system installed on the computer that has this problem? And what is the service pack installed on this operating system? You can check this information by referring to the this article .

  2. what internet browser do you use on your computer? If it is Internet Explorer that you are using, let us know its version by referring to the information here.

  At this point, I suggest two things you can do on the computer that has the problem of eliminating the factors I mentioned above. I describe below, check them out:

  Method 1: Use Windows Task Manager to identify current programs that may cause this problem:

  If you press the keys Ctrl, SHIFT and ESC keys together on the keyboard of your computer, it evokes the Windows Task Manager program. On the Applications tab in the Windows Task Manager, a list of the applications currently running on your computer is displayed. When you have found this reading repeated in the computer, you can open the Windows Task Manager and check what programs are running on the computer at this time.

  Check the list of Applications for probable programs which could play music - a music/video player, a Web browser, etc.. You can right-click on these programs that are running and click on switch to to get that particular program and check if it plays the song you hear. If you find the program that is causing the problem using this method, you can simply close this program. That should solve the problem.

  However, if the problem still persists in the computer, follow these steps:

  Method 2: Save your files/programs, and then restart the computer once:

  Save any unsaved file/program, you have opened in the computer and restart the computer once. Is the issue still there after the reboot? To let us know.

  These steps has the basic things that you need to register such a question. I hope that they help you get started in a good sense. Please report if the problem is still there, or you need help Windows. We are happy to be of assistance.

  Nice day!