Compaq CQ58-201SQ: hard drive error

I did a check of the hard drive and it shows the following error:

INTELLIGENT CONTROL: PAST

DST LONG: FAILURE

FAILURE ID: 9GFFUW-0007J8-MFKT0K-61E403

PRODUCT ID C6J14EA #AKE

HARD DRIVE 1

Hello

The above error code refers to the failure of hard drive. You need to replace the HARD drive and reinstall the operating system for the work unit.

Tags: Notebooks

Similar Questions

  • Satellite L350 - persistent master hard drive errors

    I've known persistent main hard disk errors. Errors, in their first incarnation, were windows freeze at loading screens and screensavers, and then developed by stopping Windows to boot at all. It certainly would not start normally and sometimes would not start in safe mode. I used the recovery partition to restore the computer to its factory settings. A day or two later, the same symptoms began to manifest again, although not as severely. The hard drive errors, freeze on screens and loading screen savers.

    My question is: if I re - format the hard drive master, thus destroying the recovery partition, I could then just restore windows from a newly formed recovery CD? And, in addition, what is the probability that reformatting the drive hard completely would have an effect on the frequency of errors?
    If the hard drive is simply borked, format or not? And if yes, what is the next step?
    Could I restore windows on my drive hard slave and give up on the master?

    Thanks in advance.
    Mike

    Hey Buddy,

    Are you sure that all these problems related to the HARD drive at 100%? How did you check that?

    I don t mean it s not the HARD drive, theoretically, you could be right but before you think to change the HARD drive please use a diagnostic tool special for HDD as Drive Fitness Test:
    http://www.HitachiGST.com/support/downloads/#DFT

    This tool can check your HARD drive for bad sectors.

    If the HARD features of bad sectors disk, formatting will not help you because the sectors are physically damaged. With other words, the only chance is to exchange it.

    But if you have already used the recovery feature of HARD Toshiba drive to reinstall Windows you can say s that no problem of software and it must be hardware related. ;)

  • Hard drive error, does not start.

    Computer does not start. I get this failure code:
    Rw1xtw-7ax87b-mfpv6k-619403

    Can't find any information on this subject, can someone shed some light on this subject for me?

    Hello

    It decodes for hard drive error 305 or the hard drive has failed, you will need to get the replaced hard drive and reinstall the OS and have a Fresh start, note that all your data is saved on the hard drive will be lost.

  • Laptop HP 2000: hard drive error

    Hello
    I have upgraded to Windows 10 one a few days ago and then yesterday when I went to turn on my computer it says this.

    Hard drive error
    Please run the hard drive Test in the diagnostic system
    Hard disk 3 (3F1)

    I ran the test drive and that's what he said

    Smart check: PAST
    DST short: FAILURE

    Help, please!

    You will need to replace the hard drive. Update to Windows 10 had nothing to do with it. After the back if you want to help find a car and its installation and reinstallation of Windows. If your Windows 10 appeared as it is activated, you can do a clean reinstall of Windows 10.

  • Start up and boot problem. Hard drive error. HP pavilion laptop Home Premium. Windows Vista preinstalled. No cd came with it.

    Nothing new added to comp. Got the hard drive error message and followed the instructions to fix/repair. All translations tried (almost every test suggested/memory/hard drive, etc.) could find NO problem with the memory or hard drive.  Once I have pass the problem to boot/start the computer works fine!   Crazy!  Any sugg. would be appreciated.

    Hello

    ·        Since when are you facing this problem?

    ·        What are the fix and repair that you tried to solve this problem?

    ·        Outside this disk verification error, do you get any other error message?

    Method 1:

    I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

    ·        Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

    ·        Click on continue or provide administrator credentials if prompted.

    ·        In the command prompt window, type the following text, and then press ENTER:

    ·        sfc/scannow

    ·        You should see the following message on the screen:

    § Begin the analysis of the system. This process will take time.

    § Beginning verification phase of system scan.

    ·        % Of verification complete.

    ·        Once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

    For more information, see the article mentioned below.

    http://support.Microsoft.com/kb/929833

     

    Method 2:

    I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.

    a. click on start, then run.

    b. in open, type cmd, and then press ENTER.

    c. use one of the following procedures:

    Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

    Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

    Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

    Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

    a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

    Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

    Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

    a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

    You can see the article mentioned below for assistance.

    Check your hard drive for errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Method 3:

    I suggest you to do a system restore. Follow the steps mentioned in the article below.

    What is system restore?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Hard drive error, but passes diagnostic

    I have a vostro 320 all in one computer. Yesterday he left initializing with a hard drive error, but when I run the hardware diagnostics all past. When I go into the installer the Bious does not see the hard drive. Current Bious is 1.2.0 and current is 1.4.0.

    If the BIOS does not see the hard drive, no - you will need to replace the disk.

    You can take a chance on the resettlement of the player (unplug the system and disconnect and reconnect the hard drive), but if so, it is not detected by the system, it is toast and needs to be replaced.

  • This hard drive is compatible with my laptop? Apple 80 GB HDD 3.5 SATA for my Compaq CQ62, the hard drive that I have for that one is a "WD 500 GB 2.5 SATA II.

    I plan to buy an Apple 80 GB hard disk 3.5 SATA for my Compaq CQ62, the hard drive that I have for you is a "WD 500 GB 2.5 SATA II.

    Ports appear as it will keep and everything, but I'm curious to know, if I get this drive, I'll be able to install my Macintosh on that hard drive and use it on my laptop Compaq CQ62 or not?
    If this isn't the case, then I'll be able to install Windows 7 or uBuntu on this hard drive? The hard drive will fit even on my laptop? Thank you!

    Why you want to replace a 500 GB with a 80 GB drive it?

    Macintosh is not an operating system

    A 80 GB drive is too small for a win7 PC

  • hard drive error message 1

    Whenever I turn on my laptop, a message appears that there is a problem with my hard drive.  I have prees F2 to get the Diagnostics utility and run the hard drive test. When I do I get this message

    hard drive error

    Failure ID: 90 c 633-6am70r-mfgk0k - 60 c 203

    Product ID: c2n26ua #aba

    Hello

    Error code 24 characters will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • Dell Hard Drive Diagnostics fix hard drive errors

    My computer would stop working and say that I had a software problem.

    When restarting it would run for about 15 minutes and the cessation of work and

    show the same error.

    I have run the Dell diagnostic program and it showed that I have several

    Hard drive errors.

    After the diagnosis my computer now works fine.

    The diagnostic programs to correct the mistakes of hard dirve when he finds them.

    My computer is a Dimension 4700 running windows XP Professional

    Service Pack 3


  • Compaq Evo Notebook - hard drive problem

    Hi eveyone,

    I bought a Compaq Evo Notebook online on eBay two years ago. Yesterday, I went to use it on and got an error of the controller. So I moved the computer and noticed the my cat peeded and he went under the computer and go to some of them in the area of the hard drive. I quickly turned it off and took apart and gently he cleaned with wet towels and let rest overnight with dehumidifiers. I then put together around noon and the computer will not start past the compaq logo, but when I took out the hard drive and tried to see if it would start past the logo, what he did and when I put a CD/OS-Ubuntu and it went to the operating system install screen (since it has an option from the CD). Anyone know what I can do to be able to at least install Ubuntu, rather than start from the CD or recover windows XP.

    Thanks for any help provided.

    Andy

    It seems that the hard drive has been damaged by the cat wee, you can buy a usb hard drive adapter and connect it to another PC, see if it will be displayed in the Solution Explorer, if it copies your files off quickly.

  • Hard drive error (Code inside)

    I have a laptop Compaq Presario CQ62-225NR (running Windows 7, did not come with an installation disc) which froze during use and would begin not later upward; It just says: 'Windows loading files', then crashes on a blue background enough.  I did a test drive that comes up error id "PGFAMG - 55264 L-XD0036-60TL03" for hard disk 1.  If someone could identify the problem, it would be great.  Thank you.

    Hello

    A possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

    Replacing the hard drive is quite simple.

    The player at the link below is an example of one that would be perfect for your laptop.

    Hard drive 500 GB

    The procedure to replace the hard drive begins on Page 47 of your & Maintenance Guide.

    As you do not your recovery discs, you can order a replacement set using the link below - using them to reinstall the operating system on the new HARD drive reinstall it also almost all software originally shipped with your laptop as well as re-create the recovery on the new disk Partition.

    http://support.HP.com/us-en/document/c00810334

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • external hard drive error

    Gusy I have my external hard drive from toshiba, it seems that I can copy is no longer the files inside it on another computer or hard drive. its gives me this error ", you can always open or copy the files on the disk, but you cannot save the changes.

    At first it worked fine on my mac I formatted as MS-DOS (fat32) then. I used it for awhile and it was fine, then suddenly it began to appear this error. It tell me to save, but when I try to do, I can't copy it to another somewhre. can someone help me?

    Try to run the help Utility/First on the drive.

  • What does that mean? Hard drive error. Hard drive 1 3F1?

    The product name is hp pavilion dv4-6000

    Error message-

    A failure in the hard drive test indicates a physical problem with the hard drive. In other words, that it should probably be replaced. It is relatively in line with impatience, so you should be able to do it yourself. What is the exact model of the laptop number? I'll find detailed instructions for you.

    In case you do not want to replace the drive yourself, or if you feel that you can still be in warranty, I suggest to contact the HP Support for your region. If you are in the United States / Canada you can contact to the 1-800-474-6836. If you live outside this area, you will need to go to HP's Site's Support.

    In addition, you will need the recovery disc to restore the original operating system.  If you have any earlier, you can contact HP to get them.

  • Pavilion 17 laptop / J9M18: hard drive error

    Hard drive Diagnostics error; 608AJW-7AN88K-MFPV6K-60UK03.

    I was using the pc and he hung up.  Rebooted and pc wouldn't do anything.  I ran the diagnostic of the configuration of F2 system and it gives the above error.  Is the drive toast or can it be saved.  I tried to load the system options on but it will not read the DVD, and only gives me an error.

    Hello

    Just to be sure, is actually the error code 608AJW-7ANB8 K - MFPV6K - 60UK03?

    If this is the case, it is a disk failure short self-test and would indicate that hard is defective and must be replaced.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - understand the complete model number and your 17 laptop Nr series - see here for an explanation.

    Kind regards

    DP - K

  • Satellite A200-1AI - Windows has detected the hard drive error

    Hi guys.

    I think its time I replaced my hard drive. Ive done all the checks and his return there is no errors with the hard disk, yet whenever I connect I get a message saying that there is.

    I guess that's only a matter of time before things get more serious.
    Its just now that it unattached restarts automatically.
    Ive gave my laptop below specifications and the specifications of the hard disk drive.
    I do not know which drive hard im supposed to be looking at.

    I don't want to buy one and then duty send because its incompatiable.
    Ive done some reading on the internet and he says I cn buy any production, but I need to know wheather its an IDE or SATA, what are these and what do mean? How can I find out what my current car?

    Also should I look for a hard drive with the same speed? It doesn't matter if its fatser?
    Wise, capacity is also ok for larger, will my laptop be able to handle it. Thanks for help

    MODEL NAME: Toshiba Satellite A200-1AI
    MODEL NO.: PSAECE-00U00JEN

    HDD SPEC:

    TOSHIBA MK2035GSS HARD DRIVE
    CAPACITY: 200 GB
    CERTIFICATION: S.M.A.R.T
    DrRIVE ROTATION: 4200 RPM

    Hello

    The Satellite A200 supports the SATA HDD controller.
    That's why you need to buy a SATA 2.5 HARD.
    The value of the rmp is not really important for compatibility issues with the 4200 RPM HDD or more is possible and compatible.

    SATA controller not limited to any size of HARD drive, you can also use large drives.

Maybe you are looking for

  • Error on the numeric keypad

    Hi, I have a Lenovo Thinkpad Edge E530c. The problem is that when I press on the dot (.) on the pavement that it happens as a decimal point (.). Is there a setting I need to change to make it work as it should?

  • The screen icons and the taskbar at startup slow

    Myself and my brother the two share the lap top I use it in my attic and my brother uses in the show, but after our children were using and I start it the shortcut icons take an age to display on the screen I have place the shortcut icons take an age

  • Unable to download Dell Systems Build and Update Utility

    power edge r710 and I have legacy systems build 6.4 no support of the victory of 2012 Since yesterday I try to upload one of these 2 and I always have internet error please try again later How can I download and what is best for my server. http://www

  • PSE9 updates

    Hi, I can't get the following updates to download:9.0.3 and Raw 6.5I need to treat a D7000 Nikon RAW images, but they just won't install even if they say they are 100% downloaded. Any ideas please?

  • Clip dragging helps

    OK, I don't know exactly how that word but I'll try my best.  I'm working currently on a video and first and it was working fine last week, but the last two days any time that I try to drag a clip to run after a different clip, rather than be arreste