Compaq Presario V3777TU: RAM Up-gradation

Similar Questions

• Driver Ethernet LAN required - laptop Compaq presario V3777TU for Windows XP

  I removed vista and installed windows XP in my compaq presario V3777TU , but I could not find the suitable driver for Ethernet LAN. Now my system doesnot detect LAN. Card Ethernet in my system is integrated 10/100BASE-T Ethernet LAN.

  Corinne

  You have Marvell Yukon Ethernet:

  FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37792.exe

  Message edited by CherylG on 03/01/2009 18:55

• Problems with Compaq Presario 5BW220 RAM

  This office is 8 years old and supposedly supports 512 MB memory SDRAM PC100.

  Recently, I worked on this for my son-in-law.  It came with 64 MB of SDRAM PC100 and Windows Millennium Edition.  I tried to install 2-256 MB memory SDRAM PC133 maximum amount supported RAM, but it refused to start.  I replaced every 256 MB module with a 128 MB PC100 module and managed to do start.  I expected to read 384, but he will read only 256 MB.  I had not all PC100 256 MB modules to use.  I finally installed modules from 2 to 128 MB PC100 and he left like that.

  I never had a problem in the past with an old desk accepting a combination of PC100 and PC133 modules, so it was a first for me.

  The Compaq Presario 5BW220 have a problem with the acceptance of this combination, and she actually says a maximum of 512 MB?

  This could be useful in the future:

  http://www.crucial.com/

  If you click "scan my system" he can tell you all sorts of things on the RAM.

  I have a system built home (with all the paperwork by moving the boxes...) who had a chip spoil.  I could not remember what RAM took it and I didn't go root through the boxes in the garage. =)

  Their scanning system could not see what kind of memory I had, but he told me exactly what my motherboard could support. (Type and max of 1 GB per slot)  He even suggested several configurations of memory.

  Once I saw what he said, he had, I remembered that I had bought before and it didn't fit.

• Compaq presario s3040se RAM

  Im a freelance tech and I am in the middle of giving up a compaq presario s3040se customers a melody so to speak.

  IM goin to update modules memory live, a couple gig. I can't find a manual or a set of specifications that have ALL the info I need. It's my first HP, and I guess that ive been spoiled to work with ASUS prouducts as there is a lot of information online.

  so, from what I gathered, the MB has two DDR SD slots. He now has a module of 256 MB in the first slot and a total capacity of unspecificed module in the second. The second module is marked "64 MB", and I know that this unit uses int. Intel XGP, which share up to 64 MB of system ram. I want to get at least 1 GB, if it is not not the 2gig maximum MB of ram new in this unit. With the 'shared memory ram' im reluctant to replace the two modules. Ive found some info out there, but a large part upwards is indicated as being compatible with s3040se-b, and as previously indicated my model is a s3040se. Anyone know the difference between models >?  I have to do something different from the upgrade of my ram, where it is shared?

  any input will be appreciated thanks

  Hello

  The following link shows the specifications of this machine:

  http://support.HP.com/us-en/document/c00005384

  It came with only "256 MB DDR SDRAM" and you can upgrade to 2 GB. It has 2 slots/banks and a slot open (free). Now you can move on to 2 GB, 1 GB each slot/Bank. You can buy RAM from the following reliable supplier:

  http://www.crucial.com/EU/upgrade/HP+-+Compaq-memory/Presario/Presario+S3040SE-upgrades.html

  or use the information (including the price) to buy elsewhere.

  Kind regards.

• Compaq Presario C731TU: RAM and CPU max UPGRADE Presario C731tu chipset GLS960 cpusocket PPGA478 RAM and CPU max UPGRADE

  Hi all!

  I have a Compaq Presario C731TU I absolutely need to upgrade its opportunities top of page. I discovered that he could run processor family Intel core 2 duo, and celeron family, that sounds really good!

  Then consulted taken PPGA478 processors on the site of intel with their processor feature filter (http://ark.intel.com/search/advanced?s=t&FamilyText=Legacy%20Intel%C2%AE%20Core%E2%84%A22%20Processo...)   the best option seems to be Intel® Core™ 2 Duo Processor T9500 (2.60 GHz, 800 MHz FSB, 6 MB Cache).

  My question is:

  Is there another cpu option better? Inside of a forum, I read that it can withstand up to Intel C2D T9xxx family but after T9500 (e.g. T9600 or T9900) taking turns into PGA478 and not PPGA478. What is the difference between PPGA478 and PGA478? are they the same or not?

  Are there limits on the CPU with the BIOS upgrade? (mine is upgrated to F34 which should be the latest version)

  About RAM: this laptop should work max 2 GB of ram but in fact I use it with 3 GB of ram (with these config.: 1 GB on the inner slot and 2 GB on the external, the inverse solution does not work, can not guess why), but someone "found a way" to use the 2 banks of 2 GB 4 GB total (and if according with this http://www.intel.com/Assets/PDF/specupdate/316274.pdf - pag. 19 - should be quite possible) , what ram 2x2gb modules can be accepted if? Help me = S

  Thank you very much in advance!

  I opened the laptop and the chipset inside the computer, wirtten there is an INTEL GL 960 who should manage only 553 mhz FSB... But... I installed inside, as the core 2 duo t9300, which has 800 Mhz FSB and it is fully functional in frequency from 800 Mhz to FSB. Really good news =)

  AIDA 64 tool (former Everest) shows the FSB of GL960 chipset can run on 533, 667 and 800 Mhz frequency.

• Compaq Presario F730US RAM/OS issues

  Hello world!

  I recently acquired a NICE Compaq Presario F730US laptop with a fresh install of Vista Home Premium. It seems to do very well, except for a few things, but people have been (literally, everyone) telling me I had to upgrade to Windows 7. That, I would be OK with this, as an upgrade to Windows 7 Edition Family Premium is $ 90 at Amazon at the moment, but I don't know if I have enough RAM.  I have 1 GB installed and want to install more, but the problem is, according to critical, most computer media is 2 GB, correct?  I mean, that seems to be enough to run Vista properly, (he does well on 1 GB, honestly, but Aries is anywhere between 50 and 90%, usually + 80% with running programs), but I read that Windows 7 requires 1 GB to run by itself.  If this is the case, 2 GB seems worth enough (Vista is a 32-bit operating system installed here, and 7 would be so 32-bit) this laptop can be used more than 2 GB?  I don't know why they are "limited" on the RAM, appears as a type of thing is really not necessary to limit. If 2GB is the absolute most it may take, 2 GB will work Vista Edition Home Premium, or is it better to leave with Vista? I heard a lot of horror stories about Vista, while everyone else seems to love 7. I checked the Support/Drivers section, and there has not been an update of the BIOS in almost 3 years, so this is the original that is currently on the computer.

  Thanks to you all.

  p.s., while I am, can this laptop take a bigger hard drive?  250, 320 AND 500 GB?  Are there specific features in this category?

  Thank you.

  Hi, you can install up to 2 GB of memory. I would stay with Vista just upgrade to the latest service pack.

  You can also upgrade your drive hard the largest stay only available with the 5400 RPM.

  The main problem in the Win7 upgrade will be device drivers

• Presario CQ5110F: COMPAQ Presario CQ5110F adding a second hard drive and...

  Good so I took the lead when writing my original post on how to combine the two computers successfully.
  Not enough research, no question, just a little say aloud... Sorry about that.
  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Pavilion-slimline-s3505f-amp-...

  I had little time today messing with both ' puters and discovered...
  They need a good cleaning and had.
  The noise of the Presario is indeed the fan on the radiator, it's just old and tired. Who cannot be strong in a music room; new fan may not be too expensive.
  So I decided the Presario is my starting point.

  I would add the hard drive of the Slimline as slave; they have different connectors tho.

  (1) if I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.
  (2) what parameters of rider (if any) do I need to have on each disc? Do not see outside the car Slimlines.

  I looked closer 2 slots for RAM and noticed that beside them there seems to be 2 places in addition to the Board of Directors, unused with no present holders plastic.

  (3) is it possible to add more slots and double the RAM? I would get 8 + GB and a 64-bit system end by ;~)

  Neither office seems to have the ability to run 2 monitors as is. No problem 29 "should do for now.
  Can't see a way to take the card out of the Slimline wireless and put it in the Presario. Internet not immediately necessary, hard connection cable always an option.

  All the other tips and advice on how to optimize my sytem are also welcome.
  Thank you for your time and helping an old guy handyman.
  See you soon!

  COMPAQ Presario CQ5110F (2008ish)
  Processor AMD Athlon X 2 7550 Dual Core 2.5 GHz = Socket: AM2 +.
  Card mother = Narra5 M2N68 - THE Chipset: NVIDIA GeForce 6150SE nForce 430 Socket: AM2 +.
  Memory RAM = 4 GB RAM DDR2 DIMM PC2-6400 MB/s
  = Video/graphic card nVidia GeForce 6150SE integrated graphics
  Sound/Audio = Audio integrated Realtek ALC888S
  Hard = 320 GB SATA 7200 RPM drive
  CD/DVD Player = DVD +/-R / RW 16 X SuperMulti SATA drive
  OS = Vista Edition Windows Home Premium SP1
  Power = 300w
  Case = Mid size 38cmHx17cmWx43cmL ATX

  Hard drives has no different connectors if they are both SATA specifications like other post indicated.

  There is no adjustment to make on hard disks of the rider SATAS. According to me, that one can think of the old school the IDE drives.

  ) If I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.

  The image below is a diagram for your motherboard. You have enough SATA ports to be used for the second and even a third hard drive.

  

  DDR2 memory modules can be a little difficult to source. The current generation of add-on memory is the DDR3 specification.

  Perform a Google or any search engine is your preference in the memory of the source by using the update of Compaq presario CQ5110F RAM as keywords.

• About RAM compatibility...? HP Compaq Presario B2000

  Hello everyone,

  First of all please forgive me for my lameness...

  I have this old laptop that I use constantly up to now I have had NO problem/s which so than ever, except it requires upgrading memory, since it had 256 MB of memory when I bought it... I decided to update my ram at least 1 GB for my laptop to be more or less at par to the current requirements of modern software... Now my question is concerning the ram compatibility, I just wanted to ensure that the Rams are compatible since RAM DDR1 SODIMM are quite expensive compared to their DDR2 and DDR3 variants and once the Rams are purchased cannot be returned... more than info posted below...

  Laptop: COMPAQ Presario B2000 (model: REPLACEMENT-L07C)

  s/n: KRD43404JD

  p/n: PE972PA #AB0

  Service: B2028AP

  OS: Windows XP

  The only DDR1 SODIMM RAM available to my place where I live are:

  1. the TEAM Elite PC3200 DDR400 1 GB module

  2. TEAM Elite PC3200 DDR400 512 MB module

  Now my question:

  1 are those DDR1 PC3200 RAM compatible with the laptop?

  2. If these Rams are compatible should I expect (1module) 1 gb ddr400 or (2modules) 512 mb ddr400 RAM to achieve a system of 1 GB of ram?

  3. I know it sucks but where I am from RAM DDR1 SODIMM are kindda rare and very hard to find.

  Thank you that very very very much... and I hope to hear your words of wisdom... Thank you...

  You are the very welcome.

  Analytical result image has not yet passed censorship HP.

  I can't find anything on Crucial or Kingston of the site or the other, but I found this...

  http://www.upgradecomputermemory.com/RAM.cfm/memory/C/Compaq/Presario-notebook-memory/Presario-B-Series-notebook/Presario-B2000/

  It's showing that this notebook can take up to 2 GB of memory (2 x 1 GB PC-2700 memory).

  I don't know what to tell you. If it was me, I would buy only a single chip of 1 GB at a time to make sure it worked.

  This place says that their memory is also guaranteed to be compatible.

  Paul

• I would like to increase the maximum ram my notebook compaq presario cq57-450ea will be all

  I would like to increase the maximum RAM that will allow my computer laptop Compaq Presario CQ57-450EA, currently only 2,00 GB.
  I would be very grateful if you could provide me the information, including any product code so that I can order the correct item that is compatible with my machine.

  With regard to the stem

  Hello

  Please find the link given below might help you.

  Compaq Presario CQ57 - 400 Notebook PC series - specifications

• Compaq Presario CQ5720F: upgrading Ram

  I wonder ig this stick of RAM is compatitble with the computer and if the computer can manage a RAM of 8g stick replacing the 3g one.

  Kingston HyperX 8GB 1333 MHz DDR3 CL9 DIMM FURY

  Compaq Presario CQ5720F

  Processor: AMD Athlon II X 2 245
  RAM: 3 g (2.75 usable)
  System type: 64-bit

  Graphic video: Integrated using ATI Radeon 3000 graphics

  My friend's computer is out of memory so that she can't play a game with us. She has need of more memory so I want to upgrade the RAM, but I'm not sure which one to buy.

  Mousu, welcome to the forum.

  This is memory that is recommended by HP to be compatible with its motherboard:

  • Dual channel memory architecture

• The Rams - EE of Compaq Presario CQ60-116 upgrade

  Hello

  This is my first post so I think I erased my point of view, which may not be 100% good.

  In any case, short story...

  I have a Compaq Presario CQ60 - 116 EA
  http://support.HP.com/us-en/document/c00820047
  
  and I would like to upgrade of his memory, I know that it can take up to 4 GB, but I'm not sure of the maximum speed of memory the motherboard can take and use fully without being too high speed. (for example, I won't buy a 1333 MHz Rams beacause I know that it is more than enough and that it is a waste of money)
  
  I am confused between buying a 667 MHz or a 800 MHz. So, could someone give me a hand here please
  
  Thanks in advance...

  Hello:

  You want to buy 2 x 2 GB of PC2-6400 memory for the processor T5800 in your notebook.

  Memory running at 800 MHz

  http://Ark.Intel.com/products/35581/Intel-Core2-Duo-processor-T5800-2m-cache-2_00-GHz-800-MHz-FSB?q=T5800

• What is the maximum RAM for each location dimm can support for desktop computers Compaq Presario CQ3541L?

  I have a 32-bit ubuntu 12.04 OS installed on Compaq Presario CQ3541L desktop PC. Now, I want to update higher along 64-bit ubuntu 12.04 OS memory RAM. I want to know what is the maximum size of the main memory that each DIMM DDR3 slot can support. I need at least 8 GB of RAM since the apps I run will consume as much as 6.5 GB and probably more.

  Thank you.

  Yes, that's the conclusion I came to.  You can always try to see what is actually happening.  I had a different motherboard (again a HP) which had similar limitations except his max was total 2 GB, and he saw 4 GB very well.   They make a slightly different version of this Board with 4 memory locations, instead of both yours has, then who knows until you experimant.

• How much ram is on a HP Compaq Presario CQ60

  HI - the amount of RAM is native on a Compaq Presario CQ60 HP? How much he will have in total? I wait to see how much RAM is on my laptop? Thank you, Jane

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Please see computer Hope - determination of the amount of RAM is installed and available to determine the amount of RAM installed on your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Presario sg-3320il: upgrade of RAM Compaq presario sg-3320IL

  Hello

  My office - compaq presario sg3320il originally supplied with 1 GB ddr2 RAM (2 x 512 MB sticks). I bought a 2 GB Transcend DDR2 800 Mhz RAM stick (model number: JM800QLU - 2G). It worked perfectly when I removed the old sticks pre-installed and added this new RAM stick only (IE, with a total of 2 GB of memory). I bought another stick of 2 GB of RAM - same brand, same frequency, same model number too and now when that is added with the older 2 GB of RAM, it does not work properly. Some weird appears on the start screen for half the time and sometimes when I restart the system, he gets up to system boot and then hangs or restarts.

  The two 2 GB RAM when used only work perfectly. Product specifications are here as well as the news of upgrade memory - http://support.hp.com/us-en/product/Compaq-Presario-SG3320IL-Desktop-PC/3697170/model/3707607/docume...

  Help, please

  Hello again @kau_shik_51094,

  In the case of 2 RAM sticks not even work together, I suspect that the slot on your motherboard is damaged.

  Really, there may be another explanation that your computer works with both sticks independently of each other, but not together and since they are the exact same it leaves only the motherboard as the problem.

  I hope this helps. Thanks again for your post on the HP Forums. Have a great day!

• HP Compaq presario CQ43: not enough ram in my computer

  My HP Compaq presario CQ43 has 2 GB of ram. I want to get 8GB. It is 64 bit and it's hard to run most programs because of the ram being such a small size. It will support 8 GB of ram? If I take out the old 2gig and put 8 gig will perform best?

  According to the manual, yes it can accept up to 8 GB memory DDR3-1333 SO-DIMM. See this video on: 33 in there where is flush with the memory. This technology never removes the memory but you just spread the retaining clips and remove and then follow again. See the second video.

  https://www.YouTube.com/watch?v=hVBzX2OeRtY

  https://www.YouTube.com/watch?v=V5q6fqZVQPs

  You have 2 slots, so you need the modules of 2 x 4 GB like this:

  4 GB (PC3 10600, 1 333 MHz) 621569-001

  http://www.Amazon.com/HP-DDR3-SDRAM-memory-module/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1434888717&SR=8-1&keywords=621569-001

  Yes, 8 GB of memory will be a major improvement. Better upgrade would be to replace the mechanical drive with an SSD. After back if you are interested by this.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.