Compatibility - HP 300 s & HP 121 s - HP Deskjet F4280 ink

Similar Questions

• Problem cartridge compatibility HP Deskjet 1000 ink

  Hi, I bought a printer Deskjet 1000 J110a here in Dubai, United Arab Emirates, Middle East. and replaced new cartridges number 61. the area of ink said deskjet 1000 on it. So I was confident that it would work!

  But it's not and incompatible ink cartridge error permanently. Please can you help me do some settings somewhere to make it work. I can't replace or refund the cartridges, as it had already opened and to install them in my printer. On google, I saw something about changing the locale? Help, please. Using Windows 7 64 bit.

  Hello Adeel.

  You will not be able to make such, HP will only reset the printer to the region that you located, and not for a different region.

  As a reference, you can find the following document, HP will assist only reset of the printer for your country:

  http://support.HP.com/us-en/document/c02558798

  Kind regards

  Shlomi

• HP Deskjet 3050 ink cartridges compatibility issues.

  
  

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

• DeskJet 1510 - Force print 300 dpi?

  Hello

  I have a specific requirement to print at 300 dpi. We have a Deskjet 1510 that I intend to use to do this, however the print quality of advanced options setting is "informative" and seems to only print at any DPI are provided by the application that originated the print job. I tried to define quality in project mode, but appears not to have had any effect.

  Is there an entry registry or by setting the somewhere (or with use of a specific driver) by default all print at 300 DPI only?

  Thank you

  Hey @warmecha,

  I'm sorry to hear that the other pilot fails to print through the RDP session. I thought that we would finally get to go for you. These things can sometimes be stubborn.

  Regarding the other HP printers that can do specifically 300 dpi, I made a few inquiries and found 2 models that can suite your needs.

  First, I looked into products that had only a 300-dpi option, and unfortunately no printer have this basic capability.

  Instead, I found two printers that appear to match or be very close to the Deskjet 2000 capacity.

  HP Deskjet 2000 printer Specifications

  1 printer: printer Deskjet 1010

  2 printer: printer all-in-one Deskjet 2540

  I hope this information helps. It has been a pleasure to work with you.

• No reason not to use Virtual PC to work around inconsistency of program?

  I just bought a $29 printer instead of spending $45 to replace the No. 23 of my DeskJet HP ink cartridge.  Unfortunately, I forgot to check for compatibility and have not been able to find a way to share with Windows 98SE.

  I tried to upgrade my old copy of the print shop to Vista, but the Compatibility Assistant told me it was a known incompatibility.

  On a whim, I booted up my copy of Virtual PC with Windows XP and was able to install and run it without problem. THERE is a driver available for the printer and had XP no harm to use as a shared printer.

  Is there a reason not to use Virtual PC to work around incompatibility with Vista? I know that it is not suitable for the games because of limited capacity, but what about productivity as The Print Shop Deluxe 5.0 programs?

  P.S. Can someone suggest a way to share a HP DeskJet 1000 with Windows 98SE? I saw a reference to another printer that has 98 drivers called a Deskjet 1000cse, but according to the website of HP, this is another printer that is no longer supported. Any chance I can use drivers 95/98 for CSE to connect to a share of Vista? If so, how do I configure it? If these drivers are like drivers for my DeskJet 812C, the option "have disk" will NOT work in the list, the installer will put things for a local printer rather than on a network, an and I do not remember that it is also easy to change the port to a network printer, you can with XP and Vista.

  Is there a reason not to use Virtual PC to work around incompatibility with Vista? I know that it is not suitable for the games because of limited capacity, but what about productivity as The Print Shop Deluxe 5.0 programs?

  As long as it works, it's a great idea.

  teengeek.freehostingcloud.com

• DeskJet F4280 problems with cartridge region

  Hello

  I had this kind of problem, I bought the HP DeskJet F4280 printer in europe some time ago, and there were 2 cartridges in complect (number 60). When they finished, I bought some cartridges in the United States, but they are a number 300 (it's really the same cartridge, just another region), has called for assistance from HP in Latvia (where I am now), they sayed it isn't a problem to change to another region. Asked my printer number of product (CN82P2G1H8) and after that they said someone from the technical part will send me e-mail with tip how to change region and also a password change regions. But now the 4th day and no email from HP tech could you please explain here how to change to region and also a password for it (my e-mail address: [email protected])

  Sincerely, Francis

  Hello

  Unfortunately it is not possible to make a region reset here. A henchman HP agent must create a key in a specifik software play, so I suggest that contact you your local support and ask why you have not been contacted and you want to reset the region of the printer.

• I wrote a program using windows visual with windows 95 that does not run the 300 in vist compatibility dll file, how can I make it work under vista

  I need instructions for details on how to get this written self program for working under vista

  responsible to: * address email is removed from the privacy *

  I call this Whatday program, it is a calendar program

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
   
  http://social.msdn.Microsoft.com/forums/en-us/categories/  
  

• I have an IMAC of 2008 with 2 GB of memory plus 300 GB of storage. If I buy 2GB of memory I'll be able to download Sierra?

  I have an IMAC of 2008 with 2 GB of memory plus 300 GB of storage. If I buy 2GB of memory I'll be able to download Sierra?

  Mike,

  No, macOS Sierra is not compatible with your hardware.

  Here is an analytical compatibility.

  

• Satellite A300-15B - 300 SATA-Compatible?

  Hi all
  I only run Kubuntu (64 bit) for the moment on my machine, but I would add an extra internal hard drive, so to reinstall Vista.

  My questions are:
  1. If there is no problem with the extra hard drive, (the beach is empty then why not add a few outside more GB of storage?)?
  2. I found that good part of WD 500 GB but it's sata 300 so I'm not sure if my motherboard can afford it.

  If the above is fine, something extra, off-topic will be if I can still use my windows activation key.

  Many thanks in advance,
  Nikos

  Hey,.

  It s absolutely no problem adding a second HDD. As you already wrote, why not add a few more ;) GB

  General rule, SATA 300 (> SATA2) hard drives are not a problem. As far as I know Satellite A300 already supports SATA2 and if not all SATA2 hard drives is compatible downgrade SATA1 interface. So each SATA HDD work on each controller SATA, no compatibility issues don't.

  If you install Toshiba Recovery disk Windows, no activation or product key is required.

• Satellite M70-340 does support SATA 300 MB/s?

  I want to replace the original with MK1237GSX MK6034GSX hard drive. The difference is 150 and 300 MB/s transfer rate. will be mk1237gsx works with my M70?

  Hello

  The Satellite M70-340 was delivered with the 60 GB SATA 5400 RPM HARD drive.
  I don't think that the speed of the HARD drive could have a bad influence on the compatibility of the HARD drive.

  You must only make sure that the size of the HARD drive and the interface are supported!

  Best regards

• When the drivers of Windows 8 will be available for the Qosmio X 300?

  Anyone know when will be released windows drivers 8 for Qosmio X 300-130?

  Your Qosmio X 300 is old enough laptop model, and I think that it will not be supported for Win8.
  All the info on the Win8 media that you can find on http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message

  Also check the list of all models of laptops-Toshiba compatibility matrix

• Qosmio X 300 - RAM CORSAIR does not work

  Hello

  I have a Toshiba Qosmio x 300-130 and in users caraa, they say, it supports max 2 x 4 GB ddr 3 = 8 gb
  So today my CORSAIR RAM is HERE! AND I was surprised that they did not work!
  IMA on tips that think that is the pr?
  Here is the part number
  cmso4gx3m1a1333c9 I bought 2 x4gb :(

  There must be a compatibility problem. In this forum you will find many threads where he post people on similar issues with Corsair Memory strips.

  Send return and order high-quality Toshiba RAMs or Kingston. Modules memory compatible RAM for your laptop Qosmio have following numbers:
  1 GB DDR2-1066-PA3375U-1M1G
  2GB DDR2 - 1066 - PA3376U-1M2G
  4 GB DDR2-1066-PA3377U-1M4G

  To check part number Kingston please http://www.kingston.com/us/memory/search/options/

• Long battery life suitable Qosmio X 300

  Hi all.

  I would buy an extended battery for my Qosmio X 300 15 U.
  Can't seem to find one here (Italian language)
  http://it.computers.Toshiba-Europe.com/innovation/JSP/optionsAndAccessoriesSearch.do?service=it&selOptio nCategory = 4703 & selProduct = 1055522 & id = 22 #a22

  How can I find:

  (1) my special feature type/model/broaching/whatever of current battery to check compatibility
  (2) a long battery life, suitable for my laptop model. (the current life is about 1 hour, depending on the load of HW)

  I would stick with the Toshiba products, but other vendors are OK. Europe or Italian is the best.

  Thanks a lot for any pointer.

  Diego

  I checked the support from Toshiba for some x 300 models page and I found no place where Toshiba offers several different types of battery for this model of laptop.
  For example, I know that Toshiba has offered different battery types (different number of cells) for many other models of mobile phone, but not for these portable multimedia Monster.

  They have designed activities video games and powerful and the best result is with the settings of high performance and, of course, with high power consumption.
  This multimedia laptops are certainly not designed to work with power supply battery.

• Qosmio X 300-130 PQX32E - CPU upgrade question

  Hello

  I'm thinkink of upgrading my CPU TOSHIBA QOSMIO X 300 - and searching the net I found that this is the most powerful processor can I upgrade to [Intel® Core 2 Extreme Processor QX9300
  (Cache de 12 Mo, 2,53 GHz, BUS frontal à 1 066 MHz,)]

  so before you buy it I decided to ask here if someone did, and if it is really compatible

  My current setting

  Type of processor Mobile DualCore Intel Core 2 Duo P8600, 2400 MHz
  Bus Type Intel AGTL +.
  CHIPSET: Intel Cantiga PM45
  Intel Montevina Platform

  Hello

  Updates are not officially supported
  But you can read here on the forum about updates and in many cases, the CPU upgrade was possible

  Always is there to check the compatibility of the chipset
  If the chipset would be compatible with the new processor, you've got a good chance to get it running

  The question is: would the BIOS supports the new processor?
  Answer is not easy because there is no information on the supported processors.

  Here are the details of Intel on the chipset:
  http://Ark.Intel.com/products/chipsets/35515

  Under compatible products, you can find the processors supported
  It looks like the Intel® Core 2 Extreme Processor QX9300 (2.53 GHz, front side bus at 1066 MHz, 12 MB Cache) is supported by the chipset

• Re: 8 GB Ram did NOT work in the Qosmio X 300 - 14 p

  Hello

  I wanted to spend my Qosmio X 300 - 14 p of Ram of 4 GB (2 x 2 GB) up to 8 GB (2 x 4 GB).

  I ordered a fitting 8 GB (2 x 4 GB) the value of Atelco, where this set of 8 GB costs 155,-Euro
  (while in the shops in thoshiba 4 GB is more than 300, - means 8 GB more than 600,-, ridiculous). :

  I ordered this one:
  8 GB - Kit Corsair ValueSelect SO-DIMM PC3 - 8500S CL7

  This was exactly the necessary RAM, 2 x 2 GB, still are the same.

  PROBLEM:
  the x 300 wouldn't start when 8 GB of ram are connected
  (same tzhen does not start, screen stays black and nothing happens (you don't hear departure of fans and hard drives etc.)).

  the merchant first thought, the qosmio is reserved to the maximum of 4 GB completely, but I was able to convince him that this is not true.
  then he assumed "branding" (only some modules work).

  but it was also not true, because the two modules to 4 GB worked when connected only.
  the two modules worked in places, housing upper and lower.

  even weirder: I could plugin 1 x 4 GB and 1 x 2 GB and it would start perfectly and appear 6 GB (6144 MB).
  He has also worked in any combination (any module in any location).

  My bios is 2.10, the latest toshiba provides.

  the dealer said the corsair modules are good modules that work everywhere else, and as we have seen, only two of them worked (and in the combination of 6 GB: 1 x 4 GB + 1 x 2 GB).

  the question now is: WHY it did not work with 8 GB (2 x 4 GB).
  ================================================

  every time we tried, screen remained black and nothing happened, qosmio was dead.

  We also have not found any bios setting, as the manual does not say something like that.

  someone has an idea what is the reason and
  what I could do to get 8 GB to work in X 300 - 14 p (PQ32E...)?

  both modules where the good, the two worked alone in any accommodation, only two 4 GB modules would not work either.

  BTW., it was packed like a 8 GB SET (in modules of 2 x 4 GB), they had the same series and were made to work together.

  Finally, we were out of ideas.

  is this a known issue?
  is there a tweak or workaround?

  I want my 8 GB, what can I do to make it work?

  everyone there uses the x 300 - 14 p with 8 GB (or even another 300 x)?

  help appreciated.

  Thank you

  q3u

  It is not just to write this review in your last posting. You should be happy that Akuma has spent his time chatting with you and try to offer an own opinion.

  If you want the real answer contact Toshiba service and clarify this point with the professionals. If you n t as offered here answers, maybe you'll like have professional opinion and exact explanation, what can be the problem.

  Is that each RAM module will not work with every model laptop and there is a problem of cheap product and problem is compatibility.
  Many people have reported that in the past, report you it now and I do not know in the future, we will have several similar messages here.

  So, what's your problem now?
  You want to have good workbook or you are focused on saving your money?

  I checked the specification for the Qosmio x 300 - 14 p and you can confirm that you can improve up to 8 GB. Toshiba recommends using 4 GB modules compatible with the PA3377U-1M4G part number. This module has been tested and it will work. You can also buy the Kingston high quality module. It also works.

  To be honest, I never heard of Corsair. I only use Kingston.