Compatibility problem Canon iR - ADV C5240 driver

Similar Questions

• What are compatibility problems in cloning a hard drive with 32 MB cache to a cache of 16 MB or vice versa?

  Are there compatibility issues during the cloning of a HD with 32 MB Max for a max of 16 MB, or vice versa, HD the two 500 GB drives.

  Thank you in anticipation.

  Original title: cloning of hard drives with Max different buffers

  Hi blacksmith60,

  No, there is no problem with compatibility. But, you may notice a slight change in speed and performance.

• HP Probook 450 G1; E9Y30EA #ABB: [Windows 10]: driver compatibility problems, sound buttons do not work

  Hi all

  I recently did a clean install of Windows 10 x 64 on my HP Probook 450 G1 (E9Y30EA), and after installing the drivers I noticed when I cut the sound, my Mute button will not change its amber color (or orange, yellow, regardless), as it did in Windows 7 and 8.1.

  In addition, another thing that does not work is shortened mute Microphone keyboard (fn + F8). It turns off the microphone, nor its LED lights.

  I have the latest version of the Support of hotkey driver installed (7.0.13.1) HP, HP Quick Launch Buttons, HP wireless button, installed, .NET Frameworks 2.0 and 3.0, etc... everything is up-to-date, but it still not working as it should. Micro just cut does not work and pressing (sound) Mute button mute, but its light remains white, so I often do not know if I got the sound we or off with the look of a look I did.

  On the other hand, HP wireless button works normally, and it changes color to Amber when I press on it to activate airplane Mode.

  TL; DR: After the installation of the Win10 Hotkey Mute Microphone work and his Mute button works, but the LED does not work.

  Is what I can do to fix that, or is this just a problem with the driver incompatibility which would be fixed in some future updates? Or it is something else, like Windows 10 question or maybe audio driver?

  Thanks in advance,

  pajser92

  W 8.1 IDT AUDIO driver was a solution for me. All the buttons work now.  HP should release W10 audio driver for this problem, as the wrong audio driver provided by W10 is a reason for this problem I think.

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• I recvd error 'program compatibility problem' for my logitech g27 wheel.

  Logitech G27 Racing Wheel game controller

  I recvd 'compatibility problem program' error for my logitech g27 steering wheel wheel.it has been running for 1 1/2 years.

  Hi, Raceready6,

  You have posted to the Feedback Forum of responses from Microsoft.  This question should be posted in the Forum located here games

  http://tinyurl.com/7rale6r

  Compatibility PlayStation3 game with Logitech G25 and G27 racing wheels

  This table is a sample of a few PS3 popular games released in the United States. If your favorite game is not on this list, the game can still support your Logitech wheel. Contact the developer of your favorite game for information more up-to-date on the wheel support.

  http://tinyurl.com/75y7gxc

  Steering wheel general troubleshooting of game consoles (Wii, PS, Xbox, etc.)

  If my wheel does not work on my game console (Wii, PlayStation, Xbox, etc.), what should I check before contacting support?

  On a console, there are two things to check if a wheel does not work in a particular game:

  • Hardware configuration
  • In-game support for ruffles

  NOTE: If you have a Driving Force GT, and most of the wheel works with the exception of the special as the PS button buttons and Horn, see article 10768 Knowledge Base. If you have a steering wheel Driving Force, and that you are trying to play a game that is inherited from the Playstation (PS1/PS2) on a PS3 console, see article 10767 Knowledge Base.

  Installation of equipment:

  To check your hardware configuration

  1. Turn off your game console
  2. Disconnect the power adapter of the wheel.
  3. If you have a wheel that mounts to a desktop, check the AC adapter cable is firmly connected. A loose connection in the steering wheel unit to be recognized.
  4. Check the working of the power source. Some wall sockets can be controlled by a wall switch. If in doubt, try to plug another device into the wall to check the functioning of the power.
  5. Check that the USB cable has not plucked or separations in the thread.

  In-game support:

  To see if the game is compatible:

  1. Logitech.com is trying to keep a list of the supported games on the product page of each wheel. If your game is on this list, then it is certainly supported. If this isn't the case, you may need to contact the developer of the game.
  2. If your game is listed as supported on Logitech.com, but you can't use your wheel again, your game or console may require an update. It is recommended to connect your console to the internet, and then start the game in question. If your console is connected to the internet, most of the games automatically checks a status update. Try to complete each game, in addition to your console, if necessary.
  3. Try a different USB port. Some games have specific requests of what port should be connected to a wheel.

  Additional information:

  If you try these steps and your drive still does not work, contact Customer Service. The representative may ask you to repeat, or perform some variants, these steps to check the activity of the wheel. Perform these steps with the technician can resolve your case, we recommend following the steps requested by the technician.

  http://tinyurl.com/7lerfvt

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• I've lost a number of buttons for google. How long until you've solved the compatibility problem?

  When it asked me to update Firefox it says that he was not currently compatible with the Google toolbar. I lost most of my buttons for Google now. How long will be until this compatibility issue is resolved? Can I go back to the previous version?

  I suspect an extension that you have is not compatible with Firefox 5.

  You can try this extension to override compatibility problems,

  • https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  If you want to downgrade, see here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html
  • http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-4.0/ - choose the operating system, then the En-US directory
  • Installation of Firefox

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• After the installation of El Capitan (Canon 4400F) scanner my driver fails

  After the installation of El Capitan (Canon 4400F) scanner my driver fails. Now it's a 6 lb paper weight. Tried to reinstall the Canon software and downlading new from Canon, but nothing.

  First contact Canon for a possible upgrade.

  Then try to use the printers and Scanners pane in the system preferences application to see if it will recognize your scanner. Many current scanners is recognized and you can scan with the application overview.

  If none of these help to look into Hamrick VueScan software. I use Vuewscan with my is further supported the scanner Nikon 4000ED.

  http://www.Hamrick.com

• Satellite 2770 - problems with Windows 2000 display driver

  Hello

  I have a Toshiba Satellite 2770 and Windows 2000 is installed. If I am wrong the S2770 there graphics S3 Savage IX/MV, and I downloaded the Windows 2000 driver on the S3 site but it wont not be recognized by the hardware detection.

  Then I tried the Windows on the Toshiba site 95SE driver, but Windows 2000 acept used it because it is not suitable for Windows 2000 as it seems.

  What should do? is there a Windows 2000 driver out there that works? I don't want to work at 640 x 480 and 16 colors for ever!

  Hello

  You are absolutely right. Your device has the graphics card S3 Savage IX8 but the problem is that your camera comes with the WinME operating system. This means that there is no support for other operating systems. All drivers are designed separately for each laptop model and the OS. The only way to solve this problem is to install the driver provided by the producer of the graphic card. If this does not work, you have a big problem.

  Sorry, but I don't really know what you can do. Maybe you can try to install the driver designed for Sam 2750. There are the same graphics card, but the driver is designed for Win98SE.

• Update OS 10.9 is not compatible with Canon iPrisma 6000 and driver not available from Canon support

  How can I install a driver for my printer Canon with OS 10.9 Mavericks?

  Printer is a Canon iPrisma6000 and download driver is not on the list of printers available Apple

  Thank you

  Linda

  You can't install a driver if you do not have one that works. Have you asked Canon technical support?

• If I switch from XP Pro tp Windows will I have program compatibility problems - as with Adobe Acrobat, Corel WordPerfect, MS Office 7, etc.

  If I update to Windows XP Pro tp will be I have compatibility problems of program - as with Adobe Acrobat Pro 8, Adobe Photoshop, Corel Word Perfect X 3, 7 of MS Office, MS Project 10, Blackberry Desktop Manager, etc..  The facility will be transparent by keeping all of my existing files / content? I need to reload any program?

  What version of Windows you are migrating towards?

  Check the compatibility of each program by accessing the Web site of the Publisher. In addition, many companies, such as Adobe, have their own forums which will give experiences of other users to use a particular version of a program on a particular version of Windows.

  If you upgrade to Windows 7 or Windows 8, you can use the compatibility of Microsoft here for a guide Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/Home?Language=en-US .

  (I personally prefer to check sites and forums of the manufacturer however)

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

• Neverwinter Nights Diamond windows compatibility problems

  Origianal title: Neverwinter Nights Diamond works with Vista?  If yes how to operate?  It works with Windows 7?  If so, how? Thank you

  Finally after many years and several accidents have completed Baldurs Gate II and Throne of Bhaal.  Bought Neverwinter Nights Diamond pack 2 years and finally able to load - surprised a compatibility problem does not work.  Even my Baldurs Gate II and Throne of Bhaal worked.

  Hello

  Once I was able to downloadand patch and then run the compatibility problem solver in the programs control panel

  Make older programs in this version of Windows

  I was able to get the game running in Windows 7 and Vista.

  Vista I deleted the shortcut on the desktop, as I had it already installed before finding the compatibility issue.  When I installed Windows 7 I chose not to install the shortcut - according to a thread I had followed.

  The most difficult thing to solve the problem was to find the patch. I can not even find the page it is on, but when I typed

  Installation for Win7vista NWN1 includes links patch - the right page came

  I'll try and copy and paste the link into this but do not know if it will work.  This is the file you need with never Winter Nights Diamond toget it works.

  http://files.BioWare.com/neverwinternights/updates/Windows/English/NWNEnglish1.69HotUUpdate.exe

  The forum was http://social.bioware.com/forum/1/topic/187/index/3341490/1 , although I wasn't able to get the intothat by typing.

  The patch downloaded and installed very easily.

  After you have installed the patch, I ran the "make older programs run in this version of windows" - using XP service pack 2 (Vista) and either 2 or 3 in Windows 7.

  It's located under Control Panel - programs - but I think that the classic view.

  best regards to all the help on this forum

  Wendolyn

• System is giving compatibility problems when DotNet2003 is open

  I installed my version of dotnet2003 version of windows vista SP1 microsoft. When I opened the Dotnet, then it shows a message that it has compatibility problems. Pls Help. Because this operating system does not support the framework 1.1 what I have to do.

  Hello

  ·        You try to install .net Framework or Visual Studio .net 2003?

  If it's the later you are trying to install and run, it is not compatible with Windows Vista.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=69d2219f-ce82-46a5-8aec-072bd4bb955e&displaylang=en

  Link above provides the same information.

  .NET framework 1.1 is already installed for Windows Vista, you must not install it again.

  How to determine which versions and service pack of Microsoft .NET Framework levels are installed

  http://support.Microsoft.com/kb/318785/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.