Computer crashes, & Stop screen error

Similar Questions

• Computer crashes frequently with errors of "Blue Screen of Death" as shown below. These occur usually (but not always) after that the PC has been in sleep/wake.

  Here is the blue screen errors

  IRQL_NOT_LESS_OR_EQUAL

  MEMORY_MANAGEMENT

  PFN_LIST_CORRUPT

  -------------------------
  Bought PC in Nov 2008
  Q6600
  Vista SP2
  ATI 4850 graphics card
  4 GB of RAM
  500 GB HD

  Hello

  Probably either a (most likely) driver error or faulty memory. First run the internal memory diagnosis (just "type diagnosis memory" in the start/search to start line). If it passes, then we will have to analyze the dump file is created.

  If the error messages are compatible - even verbiage and error code, it is more likely to be a driver problem. If they are constantly changing, so the problem is more likely to be a faulty hardware. Start by memory, then maybe a hard drive diagnostic. If they pass, then the next step is exchanging materials well known from the power supply. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Blue stop screen error 0x0000007e

  Stop error 0x0000007e, as no keyboard and bootmgr missing

  Then. my pc runs smoothly for about 5 months since I built it.  So I had a lot of accidents in the last 2 weeks. No matter if I'm in a game, the movie, the browser, just loading my computer will crash.

  Accidents go like that

  • Sometimes it shows some artifacts on screen then restart
  • Sometimes it restarts just
  • Sometimes, it will have a blue screen and restart quickly
  • Sometimes a blue screen and freeze.
  So far I've updated all the drivers for the Chipset, graphics card, bios, audio, Lan everything.
  Checked the time in the bios and they are fine.
  Check the voltages in bios as well and they are beautiful.
  Swapped the ram for new ram and it still crashes.
  I swapped in a new hard drive as well and do a chkdsk on both and they are both very good.
  I checked the event viewer and I get a lot of the "display is not active" and the "computer restarted without stopping itself first."
  System specs
  CPU: AMD Phenom II X 4 955 Black Edition
  MOBO: ASUS M4A79XTD EVO AM3 AMD 790 ATX
  RAM: 4GB (2x2GB) GSKILL
  VIDEO: Radeon HD 4890 1 GB
  Power supply: Gigabyte 900W

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ---------------------------------------------------------------------------------------------

  Since it is a system custom made possible causes would be more difficult to pin down and certainly
  material should be highly suspect. Remove ALL power and reinstall all the memory cards and cables
  (at both ends) - actually delete and replace - do not just tight.
  
  References to Vista also apply to Windows 7.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-
  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue stop screen error code (0x000000f4 (0 x 00000003, 0x8652bda0, 0x8652bf14, 0x805d29b4))

  Help, please! In fact, I get 2 different blue screen error codes. The other is 0x0000007a (oxe1de08co, 0xc0000056, oxbf90f8c2, 0x2cc8e860).

  I have a netbook Asus EeePc with Windows XP SP3. The first error code appeared after hibernation. I am able to
  Log on windows, but once he gets on the desktop it freezes and goes to the blue screen with 0x000000f4...

  I am able to log on in safe mode. I tried to restore the points and the last known good configuration. Stop 0x0000007a appeared after error
  I ran a restoration and the last known configuration.

  I tried to run my McAfee in Mode safe and he stopped and the stop error code appeared. It was the only time. The blue screen is no longer
  developed in safe mode.

  I have recently updated my computer (that I know of) or that you have not installed a new software.

  Hello g2412,

  If he was thrown to the ground before this problem, then it is a possibility.  You may have a repair shop, check the hardware and run provided by your manufacturer diagnostic utilities.

  Also, we often see accidents as a result of a program from loading at startup.

  To solve these, we use the boot minimum troubleshooting - especially if we can start in safe mode.

  The following describes this process:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Best regards

  Matthew_Ha

• My computer crashes! -unknown error checking

  The computer is a Microsoft Windows XP Professional. It is rather more older (2005) and was not up-to-date or online until a few years ago. (Mainly used for games.) However, it is almost unusable now, because it hangs on a consistent basis.

  There are several different problems. The most common one is a random stop that occurs out of the blue. Most of the time it restarts and reports "system has recovered from a serious error." These error reports are different and do not have a common denominator. Sometimes they are corrupt. Other times, the computer is simply blank after the accident. the monitor to fall asleep and the tower still running.

  There is also a 'frozen' system that occurs just after the start. He reached the office but does not do so. Sometimes the keyboard and the mouse still work, but I can't click on anything. (I'm usually off manually after these two problems).

  I would include all system information I could, but unfortunately I can not turn on the computer for trouble right now. When I turn it on, the screen simply says "VGA status: no Signal input." It is like that for ever until I have turn off manually. (It's happened and I will continue to try to get it started). I tried safe mode; seems to work very well. I tried a clean boot this morning; It starts fine but after I put it in sleep mode, it is dead...

  I'm lost as to what is causing all this. This random failure has been occurring regularly for more than a year. Some days it hangs constantly and there are days when it works quite well. I tried every virus program, running the check disk, fragmentation and the installation of each update available. Nothing seems to help or give me a clue as to what is wrong, because when the computer is not crashing, it works perfectly fine!

  There are also several non-plug-and-play devices that have a yellow warning sign next to them. They all have the letter K and the other numbers to them, with the exception of a device series. They all give me code 24 (this device is not working properly or is not all its drivers installed, or something like that.)

  I would point out that the computer had viruses and Trojan horses on it, but I think they have been removed. I have Microsoft Security Essentials, Malwarebytes, and SuperAntiSpyware on it.

  In addition, there is an annoying tendency of balloons popup that warn me that firewall Windows has been disabled. Half the time, I opened the firewall and it is on. The rest of the time I have to manually turn it back on. Any idea what could be the cause?

  And regarding "recently installed programs" that could cause this problem of crash, it is impossible, because he does this for years!

  Sorry for the length of this. There are a lot of problems with no real information. I wish I could provide more data and I'll try to when the computer is running again, but I don't really know where to start. I hope that's not a failure of the motherboard or something...

  I'm very happy for any kind of help!

  Hello M & Mmpty,

  I took a glance at the last dump.  It was a stop 0x8E.  From what we see in the landfill, MPFilter.sys seems to be the culprit on this one.

  It is a component of Microsoft Security Essentials.

  Here is the stack of debugging information.  As you will see, MPFilter is at the top of the stack:

  STACK_TEXT:
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  efa25938 f2057082 8606d57c efa25988 00000040 MpFilter + 0x117e0
  efa25964 f728fef3 8606d57c efa25988 00000040 MpFilter + 0xc082
  520 520 fltmgr 8606d 00000000 0006d f7292338 efa259cc! FltpPerformPostCallbacks + 0x1c5
  efa259e0 f7292867 8606d 520 85e58de0 efa25a20 fltmgr! FltpProcessIoCompletion + 0x10
  efa259f0 f7292ef9 85fc 8020 85e58de0 8606d 520 fltmgr! FltpPassThroughCompletion + 0 x 89
  efa25a20 f729f754 00000000 00000000 fltmgr efa25a40! FltpLegacyProcessingAfterPreCallbacksCompleted + 0 x 269
  efa25a5c 804ef19f 85fc 8020 85e58de0 85e58de0 fltmgr! FltpCreate + 0x26a
  efa25a6c 8657e9c8 80583220 85eed4b4 efa25c04 nt! IopfCallDriver + 0 x 31
  efa25b4c 805bf488 8657e9e0 00000000 85eed410 nt! IopParseDevice + 0xa12
  efa25bc4 805bba14 efa25c04 00000000 00000040 nt! ObpLookupObjectName + 0x53c
  efa25c18 80576057 00000000 00000000 00000001 nt! ObOpenObjectByName + 0xea
  efa25c94 805769ce 011fedb8 011fed58 80100180 nt! IopCreateFile + 0 x 407
  efa25cf0 805790d 8 011fedb8 80100180 011fed58 nt! IoCreateFile + 0x8e
  efa25d30 8054167 011fedb8 c 011fed58 80100180 nt! NtCreateFile + 0 x 30
  efa25d30 7c90e514 011fedb8 011fed58 80100180 nt! KiFastCallEntry + 0xfc
  00000000 00000000 00000000 00000000 0x7c90e514 011fedb0

  The standards of antivirus, it seems to be enough old-April:

  1: kd > lmvm mpfilter
  start end module name
  f204b000 f2071800 MpFilter T (no symbol)
  Loaded symbol image file: MpFilter.sys
  Image path: MpFilter.sys
  Image name: MpFilter.sys
  Timestamp: Sea APR 06 13:25:55 2011 (4D9CB033)

  I would recommend the following: measures:

  1. Download the latest version of Microsoft Security Essentials.
  2. Uninstall the current version.
  3. Reinstall the freshly downloaded version.

  Let us know if you have any questions about it.

  I will consider other landfills shortly.

  Best regards

  Matthew_Ha

• Receiver "disk is full" message as well as stop screen error. I have a tire to clean unnecessary files, but still get this message.

  Window vista service pak 2, 32-bit my drive is full and I deleted everything that is full rec (D)

  I n ' t know what up grade for the packages are so expensive, they start at $119,00 but it tells me that I need the version $319.00 costs.»

  Everything I do is is play games and get on the social network and pay a few bills.

  I tried to make a cha t online and told me women convene technical unit

  I cannot find the number, I'm afraid that my computer is going to crash because I am now getting a blue screen every morning.

  I've rebooted I had to remove anything not working

  I get the message aplein disk

  HELP HELP HELP PLEASE...

  Hello

  If you receive a message that your recovery D: drive is full, contact the manufacturer of your computer.

  Using disk cleanup does not resolve this error message; Disk Cleanup is for your drive C:, NOT your recovery D: drive.

  The D: Recovery Drive is installed by the computer manufacturer and each manufacturer has its own files for the reinstallation of Vista if you installed on D:

  They are the ones who will help you solve this problem.

  See you soon.

• I had a power surge and I couldn't use the computer. Blue screen error: RQL_NOT_LESS_OR_EQUAL

  Original title: RQL_NOT_LESS_OR_EQUAL blue screen

  Windows Vista Home Pemium

  System
  Hewlett-Packyard
  Model:-s3580a
  RAM memory (RAM) 2.00 GB
  Type of system: - 32 bit - OS

  I get a blue screen with this message. Sometimes it's memory something...

  Win32k.sys - address 972FC9CF base at 9726000, DateStamp 4f79ab49 STOP: 0x0000008E (0 x 0000005, 0x972FC9cCF, 0xA72AACAB, 0x00000000

  I had a power surge and I couldn't use the computer. When she did finally after 4 months, he would sometimes load. Now in the past 2 months, the computer has been great. A bit slow sometimes. Now, I get this message. How can I fix?

  Neva mind, I got the number fixed... with a new hard drive... lol.  My other drive hard :*(broken

• Computer crash - blue screen after installing windows updates

  After you have installed Windows updates waiting on the computer earlier this week, we were not able to get the computer working again.  We were asked to back up and restore the factory settings, which we did.  It instructions update you Windows. When we download the updates it crashes again.  Does anyone know if there is a problem with one of the recent updates that we should avoid so that we our computer working again?

  Hello

  Since you are quite sure this is an update to the source of the problem I want to troubleshoot using this method.

  Control Panel - Windows Updates - upper left settings - set to download but allow you to install them.
  To operate the system and see if there are problems.

  If no problem try to apply updates in small groups or even one at a time, depending on how
  There are many. Beware especially of driver updates that may be older that you have or
  those even incorrect.

  ---------------------------------------------------------------------------------------------------------------

  These can help to solve the problems of update.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ============================

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The computer crashes with an error IRQL not less or equal

  Original title - IRQL not less or equal

  Recently installed windows 8 on a new computer and every day for the last 4 days, he fell down once to give me a message of 8 windows crash. I didn't know what he said the first 3 times, and he arrived at random while I could not reproduce consistently. I'm fairly certain that the last accident was the message IRQL NOT LESS or EQUAL, but it crashes when I'm away from the computer and capture only messages that sound restart.

  I downloaded the 4 dump files here https://skydrive.live.com/redir?resid=5845CE91240B63E5! could 105 someone give me a help to solve this?

  64-bit windows 8 x 64

  JP

  These related e22w8x64.sys Killer e2200 PCI-E Gigabit Ethernet Controller of Qualcomm Inc., Atheros.  I would like to re - install the latest driver available.

• Blue screen errors, hard disk crash and now the windows activation question

  These last six months, I had a problem of error frequent blue screen crash. Suddenly last month the drive crashed, hard my computer didn't load windows on several effors, finally the hard disk had to be changed. Reinstalled the operating system after copying the files of restoration for windows, now windows says is not a genuine copy. Now, today still crash blue screen error after from once again, he says that this window is not genuine. MT laptop is a sony vaio 3 years old and came with a preinstalled windows 7 licenses and the key that I use is one written behind the laptop on the microsoft certificate.

  He seems to have removed the incompatibility of CID at least.

  Please try activating suggestion of Andre now - the system is now simply say that it is out of time, require activation by telephone.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Occasionally, computer crashes and goes to black screen.

  Original title: computer crashes, black screen

  64-bit Windows.  My computer sometimes freezes.  Screen goes black, trying to restart, give up eventually.  Need to turn it off and restart.  Checked for viruses, registry fixed and whatever other System Mechanic, CC Cleaner and Windows tools can check.  What could be the problem?

  Try to repair your system using the system recovery options. You can access this option by continuously pressing F8 just after the start of your system and choose the advanced startup options.

  Try to repair your system at least 3 to 4 times. In addition, you will also need to check and make sure that you have all the drivers updated and the system is free from malicious trojan software.

  Alternatively, you can also find the solution posted here:

  http://tips4pc.com/articles/computer%20troubleshooting/computer_has_a_black_screen_and.htm

• My computer crashed and it restarted I asked me to refresh Firefox. I have now lost all my favorites etc. There is no 'old Firefox data' folder - help!

  My computer crashed (blue screen) and when it restarted a box came asking me to update Firefox. I clicked on OK (thought he was just trying to restore the session) and I have now lost all my favorites, passwords registered etc. There is no 'old Firefox data' folder anywhere on my system - help! is there a way I can get it all back without doing a system restore? I am running Windows 7.

  Hi, you can try it for only bookmarks: first open the bookmarks > show all bookmarks > import and backup > restore and see if you have a backup there.

  If not and the other favorites, please see.

  • Profiles of boards - where Firefox stores your bookmarks, passwords and other user data.
  • Recovery of data from an old profile.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Help? Computer stops, managed Kernel_Mode_Exception_Not blue screen error message

  My computer shuts down when I start it in the morning. I get the following error message KERNEL_MODE_EXCEPTION_NOT HANDLED with 0x10000008e and 0x5dd2952d error code and driver-induced Win32k.sys can someone please help? I tried restoring it does not work. I checked the memory without errors. Only checked the material no error. I have not recently installed the new drivers. What is a Microsoft update that is causing the problem?

  Thanks for any help.

  Hello

  Thank you for writing to Microsoft Communities. I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. are you able to boot into Normal mode?

  I suggest to follow the steps provided and check if it helps.

  Method 1:

  Step 1: I suggest to disconnect all external devices other than the keyboard and mouse, then check if you receive the same error.

  If you receive, I suggest you follow step 2.

  Method 2:

  Step 1: Try to start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  http://support.Microsoft.com/kb/929135

  Note: After the troubleshooting steps, see step 3 of the binding of boot is a way of putting your computer to normal startup mode.

  Method 3: Also, try the steps in the following Microsoft article and check if it helps.

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For reference:

  Bug Check 0x1000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M: http://msdn.Microsoft.com/en-us/library/ff557203%28V=vs.85%29.aspx

  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you

• When I try and play games my computer crashes or I get BSOD with the error Stop: 0x000000F4.

  Hello, I recently built a computer and installed all the software, drivers and updates of windows that I needed. Go and try to play games, I can play for a little bit. Then my computer crashes or I get BSOD with the error Stop: 0x000000F4. Generally before that happens, Skype will plant give me a message that says "error disk i/o" If that helps. How can I fix this problem so that this error does not happen again? It happened several times. I tried to reinstall the CMOS battery on the motherboard. I have the latest firmware of my SSD and drivers for my card mother and graphics card. My specs are:

  Windows 7 x 64
  I7 - 4770 k
  ASUS Z87 - a
  Corsair Vengeance 8 GB 1600 Mhz
  Modular power supply Corsair HX750
  Liquid chillers H80i Corsair
  EVGA GTX Superclocked 760 ACX
  Samsung 840 120 GB SSD (boot disk; the games installed on it)

  Hello

  To help you, we will need files DMP to analyze what exactly happened at the time of the accident, etc.

  If you don't know where the DMP files, here's how to get to them:
  1. go to the Windows\Minidump folder.
  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
  3 download the zip containing the files DMP to Skydrive or a Web hosting of your choice and paste in your answer.

  If you plan to use Skydrive, but do not know how to download it, please see the following:
  http://www.WikiHow.com/use-SkyDrive

  Please note that all "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove files DMP when using because of their place too.

  If your computer doesn't generate DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > failure > ensure there is a check mark next to "Write an event to the system log" > make sure that "automatically reboot" is unchecked.

  Ensure that the partial memory image is turned on and make sure the path is % SystemRoot%\Minidump.

  4. check that the viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick