Computer does not print

Similar Questions

• My printer is connected to two computers. I find that the second computer does not print unless the first computer is also on. Can I get every computer to print without the two be on?

  the printer has been first on windows 7 and second on windows xp, because that's the way I was told iy had to be done. But I thought that each computer can print separeately withou t windows 7 being on.

  Hello

  1. How is the printer connected? This printer is on a network?
  2. this configuration was already working before?

  You must configure a print server. If your printer is a network printer, you can connect it to a router, and all computers connected to this router can use the printer individually. If the printer is not a network printer, you can buy the equipment to turn it into one.

  See the articles below for more information:
  http://support.Microsoft.com/kb/308028
  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  I hope this helps.

• HP Officejet 4630 portable printer: HP Officejet 4630 printer does not print until the computer is restarted

  When I send a document to the printer; It shows in the print queue, but does not print.  When I restart my computer, the document will print.

  The same thing happens whenever I have send a document to the printer.  I have a WiFi connection from my laptop to the printer.  The blue icon on the printer lights indicating that plugged.

  Why does only work when the computer is restarted?  I ran the HP Support Assistant, and it does not find the printer; even if the printer seems to find the computer once I restarted the computer.

  It's embarrassing to say and I'm not very technical interest.  Any suggestions will be greatly appreciated.

  Hi @Maggie78

  Thank you for your patience.

  You can try the following:

  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!

• OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

  The computer does not find the USB connected printer (Officejet 7410xi) after having modernized the window system 10.

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  During SOUTH clck the link (4th one) software selection step and uncheck the Bing toolbar due to incompatibility issues with MS Edge, then continue with the installation of you

  Please let me know the results,

  Shlomi

• My computer does not accept the print command.

  My computer does not accept the print command.  He always questions me to save a file, I don't want to save a file.  How can I change this?

  Sherimcfalls,

  1. what operating system is installed on the computer?
  2. the problem occurs with any particular application?

  Method 1
  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2
  Try to set the default printer.

  Change your default printer
  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

• Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Have you looked on the Lexmark web site for help? There is a firmware download here:

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=Z33_COLOR_JETPRINTER&segment=support&UserLocale=en_US&FromPage=null#1

  Are you sure that your printer is the default in the printer folder? You can print a test page?

• Apparently, I got an automatic update of Windows XP. All of a sudden my computer does not connect to my HP Laserjet 1000 printer.

  All of a sudden my computer does not connect to my HP Laserjet 1000 printer. These work very well together for several years.

  Now all of a sudden I get a message that the computer cable is not connected.  I tried to charge the printer program.

  I unplugged and reconnect the cable to the computer, etc.. The system does not work.

  I learn by two other people, who have automatic updates of Windows, they had the same problem. We have a Kodak

  printer and the other has a Lexmark printer. This makes me think that the problem is in the updates of Windows.

  So, what should I do to fix this? I'm NOT a computer person and I'm confused.

  James

  Hello

  · The updates have been installed on the computer?

  You can follow the procedure from the following link: printers HP LaserJet - USB Devices closing work unexpectedly in Windows XP: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=45674&prodTypeId=18972&prodSeriesId=45674&objectID=bpl11421

  You can also access: family of products HP LaserJet 1000 - Error Messages on the computer (PC): http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=240170&prodTypeId=18972&objectID=bpl11045

• Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

  Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Computer does not recognize SD card inserted in the printer

  I just bought an Officejet pro 8600.  When I insert an SD card or Memory stick into the printer, my computer does not recognize it so I can't transfer my photos.  This new printer allows is no longer this action?

  Good to know, message back me when you are ready and I will do everything I can to help you out!

  Have a great day and a wonderful weekend!

  -Spencer

• When I receive a fax, it does not print, nor is it stored on my computer.

  HP has tested the printer when we installed. It is defined as the wireless. Fax test page printed. I had 9 pages received by fax Thursday, and they were never printed. Are not in my downloads. I couldn't set up the fax to save on my computer when the installation was made because I do not have a password on it. How can I get these faxes to print?

  Hello KatieRocks,

  Welcome to the HP Forums!

  I understand when you receive a fax, it does not print. What kind of printer you have? Click here to read: model number.

  How is the printer connected? USB or wireless?

  What is your operating system on your computer? Click here to read: Windows.

  Please verify this information and I will help you.

• HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

  HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

  I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

  Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

  My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

  OJ8500_A910_1315 - 1.exe

  HP Print and Scan - HPPSdr.exe doctor

  HPSupportSolutionsFramework - 11.51.0049.msi

  All versions were last uploaded on 4 April 2015.

  I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

  The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

  I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

  I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

  This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

  Help?

  Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

  It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

• My C8180 does not print the magenta if shades I print directly from my computer

  My C8180 does not print the magenta if shades I print directly from my computer.

  I did a test once my pictures came out with greenish and bluish colors. I saved an image I created and that was a lot of red, pink, purple and magenta on a flash drive. Then I inserted the drive flash directly in the front of the printer and the image printed with all the vibrant colors that it should print.

  I took the same exact image and saved on the hard drive of my computer. Printing through the computer, the colors are muted, streaked and red, pink, magenta sine.

  The problem is not with the printer heads or connectors... it must somehow be attached to the HP program or drivers. Now the question is, how can it be fixed? If I uninstall the HP printing software, if I install it again, won't the same problems with the colors appear again?

  Well, I'll point you to a video on deleting locked files that may be easier to understand than my trying to explain.

  Even if its 2010, the rules still apply.

  http://www.YouTube.com/watch?v=kiwbvwXx-ja

  Brian of Britec explains the process to remove the stubborn locked files with these two programs listed below. It doesn't matter if the locked files were a virus or not. You can stop and replay the video as much as you want, easy peasy.

  Download and install Process Explorer from Microsoft Sysinternals.

  Download and install Malwarebytes Fileassassin

  That should do well.

  Let me know how it turns out.

• Samsung SCX-4100 does not print on the computer Windows 7 x 64

  I have a Samsung SCX-4100 printer.  It worked fine on two different computers of precedents, one with Vista and the other running Windows 7 (x 32).  I updated to Windows 7 Professional 64 - bit and charge computer driver Samsung x 64.  The printer appears installed but do not print.  It is listed on all my programs and, when told to print, the printer icon appears in the taskbar lower, but no document don't appear in the queue and the printer does not print anything.  Printing only that was the case, the installation, it printed on the test page correctly.  I used various troubleshooters in Windows, I've deleted and reinstalled the printer several times and nothing has changed.  I tried to re - setup the USB port to which the printer is connected, but I received this statement each time: "an error occurred during port configuration" and so I can't try to re - port.  I must tell you that I've initially left the programs and settings 32-bit for the 64-bit computer using the program PCMover, and I wonder if somehow I sent some incorrect settings to the new computer that are now interfering with the installation of the correct printer.  You have any ideas how I can fix, or help out at least that?

  For all those who may have been following this thread, as stated above, I have been unable to solve the problem using the recommendations provided by the technician above.

  However, after endless research and several experiments, I found a fix on another site:

  In Regedit, navigate to HKEY_LOCAL_MACHINE > SOFTWARE > policies > Microsoft > Windows NT > printers.
  Right-click on the Printers folder and select Delete to remove it.
  Restart the computer.

  It was the only thing that has worked to enable printers to work on my 64-bit machine.

  I hope this is useful to someone else who was pulling her hair on this issue.

  Brad

• Computer does not recognize the printer driver Canon ipf 8100

  I downloaded the driver fron Canon and installed on my 64 bit Windows 7 system, but the computer does not see the driver for my printer is still not installed

  Hi Larry,

  To better understand the issue, I would like to know if you receive any error messages. If Yes, what is the error message that is accurate and complete.

  It seems that the printer is compatible with windows 7.

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=canon%2BIPF8100&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Method 1:
  Run the troubleshooter and check if that helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  If the problem persists, try the procedure described in the article and check if it helps.

  Note: Try all the steps except the resolution of problems.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.