Computer ghost

Similar Questions

• A floppy drive is in my computer when no floppy drive is present in the system

  Hello

  My system is as follows:

  PC x 64 ACPI
  Vista Home Premium 64 - bit SP2
  M3N78 Pro motherboard ASUS
  2 x AMD Athlon 64 x 2 processor Dual Core 6400 +.
  4 GB OF RAM
  2 x 500 GB Seagate Barracuda Hard Drives (ST3500820AS)
  NVIDIA GeForce 9800 GT graphics card

  A recent power outage at left me with several problems when restarting my pc. It was notably BIOS reorganize my boot sequence so that my drive C and drive D swapped places, ASUS Express Gate allowing itself when it had previously been disabled and apparently adding a floppy to my system drive (visible in my computer and Device Manager) when none are physically present. Some alterations in the Bios allowed me to change my boot back to its original and correct order sequence and disable ASUS Express Gate, and therefore no longer issues. However, I had absolutely no chance to get rid of the ghost floppy. My only solution is to disable the floppy drive controller in Device Manager (I don't know if it was present before installing SP2 or the power cut or not) in order to remove the entry from the workstation. However, this means that it is always visible as an inactive device in Device Manager. If I try to uninstall both the floppy drive and the controller of the device, Vista Manager merely note them appropriate drivers and kindly re - install them for me, placing the drive in my computer ghost floppy drive and Device Manager. Short of reformatting or the upgrade to Windows 7 to see if I can fix this bug annoying, I'm at a loss as to how to proceed. Any help much appreciated.

  See you soon

  Jon

  If you have even disabled the floppy controller in the BIOS?
  In addition, to replace your CMOS battery (typically a CR2032 coin cell and available everywhere.)  That's why your BIOS to reset the values by default when the power is out - his battery died.
  That won't help with this particular problem right now "However, it will prevent it from happening again.

  HTH,
  Chris

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to permanently remove ghost my computer's usb drive?

  I have a hp mini tower running vista home premium 64-bit. I have several usb devices connected. I noticed that a week ago, that when I opened the folder on the computer, a disk of mass storage is displayed which does not exist.

  Can I stop or remove safely which removes the drive icon. But when I restart the computer later, Ghost drive letter appears again. I even tried to delete the driver who, again, don't work only temporarily. I even made a full recovery, but the drive appears again.
  What can I do to permanently remove this ghost of my computer drive? Thanks in advance for any help that anyone can give me.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  1. click on start.

  2. Enter Device Manager and press ENTER.

  3. click on view and show hidden devices.

  4 uninstall the ghost pilot.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Stopped my Norton Ghost and Norton checked my computer and found that my Vista Premium do not have or plug and play services event log

  original title: journal of events in Vista Premium

  I had to reinstall Vista after a hard disk failure. My Norton Ghost stopped and Norton checked my computer and found that my Vista Premium do not have or plug and play services event log.
  Do you know how I can get them?

  The event log service will not start. I tried manually, start it and get this message.

  Windows could not start the service on the Local computer Windows event log.
  Error 998:Invalid access to memory location.

  I don't understand why it happened all of a sudden. Does anyone have an idea how I can get going again.

  Hello

  Method 1:

  Event Viewer services are - primary (Windows event log) it has no dependencies, but is dependent on the Scheduler of tasks and Windows event collector.

  Click on start and type Services) in the search box

  (b) right click on the list of programs services and selecting run as administrator

  (c) locate the services listed above and check if they are started.

  Method 2: How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Computer has a drive letter removable (F), when I have no usb drive plugged. How can I remove this ghost disc?

  The system is Win7 Home premium 64 - bit current updates to update installed.

  Hello!

  1. open Windows Explorer, click the "organize" button in the command bar and select "folder and search options".

  2 go now in "View"tab, scroll down a little bit and you will see an option"hide empty drives in the computer folder. Enable the option and click apply

  See you soon
  Julia

• Ghost recovery CD does not start on a virtual computer

  Greetings-

  Sorry if this is a repost - this is the number

  I'm trying to restore a win / me system in a virtual machine.  I have a backup Ghost 9 of it. I created an empty vm and

  tried to restore using the ghost cd.  The system booted, but simply collapsed to the point were it was looking at the "system".

  It was that way for 20 minutes until it stop him. I thought I did it with an early version of the workstation (I'm running with 6.5.3)

  I've missed something with this process?

  Thank you

  Frank

  next things I want to try...

  -Add more RAM

  -remove the 3d and USB support

  -remove the SCSI controller

  If this does not help, try to run it as a compatible VM WS 6.0

  What is the exact name of this iso? -It is based on the PE or BACK? -I don't remember right now.

  Do you need to recover a file *.gho or you have a different extension?

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• uncontrollable iPhone - ghost key

  Hello

  Here you can see a video of my iphone 6 which is out of control. It's like a ghost touches!

  https://youtu.be/nhyjH38wA4g

  My phone have between 1 and 2 years, so Apple is ok to say that the phone is in excellent condition (no shock, as if it is new) but they tell me they can do anything for me! I'm really worried about it. The phone is for the second time to Service my operator Bouygues Telecom... During this time, I don't have my iphone and I am a professional photographer, it is really difficult and annoying to not have my email, my gps, my music, my contacts and so on.

  For me, it's really like planned obsolescence...

  I am a buyer excellent apple with my iphone, ipad air 2 and the imac 27 "...

  I think that the operator is not the good computer and information to make the right decision on my phone. Only Apple can do.

  Have you tried the basics of manual?

  reboot, reset, restore from backup, restore as new

• Internal display flicker, ghosts, black flashing

  When you open the lid, the screen started "seers" black, I hear by then the screen will turn on and off, but when on, only show a black screen.  You can see what I mean here. When the internal display turns off, external displays for one second lag.

  Sometimes, the internal display will show what is actually on the screen, but it will flicker severely and superimpose a ghost of the screen on to halfway to the bottom of the screen, visible here.  External poster work very well, although they tear sometimes for a millisecond or two.  The computer works fine, I just can't see what I'm doing.  I am posting this from the computer using an external monitor.

  Steps than to attempt to resolve, I took:

  -J' test to see if it's a problem that the operating system sees or simply the screen by making an entry using Quicktime screen, and no problem in the recorded video.

  -Apple diagnostic test revealed no problems found (reference code: ADP000)

  -Reinstall OS X several times

  -Starts in Bootcamp, same problem with the internal display

  My thought is that it's a bad display cable, the screen inverter or any other Apple diagnostic Test does not cover.  Thanks for any help you can provide!

  Data sheet:

  El Capitan 10.11.6 (15G 31)

  MacBook Pro (retina, 15 inch, mid-2015)

  2.5 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  512 GB SSD

  AMD Radeon R9 M370X

  Hello CAWeissen,

  Thank you for using communities of Apple Support.

  I understand your message that your MacBook Pro screen flashes only a black screen, but you can use external screens without problem. I know how much I use my Mac and using an external display is nice, but I do not always want to use a. You did a lot of great troubleshooting so far! An extra step that I would recommend would be to reset the NVRAM.

  This article includes the steps to reset the NVRAM:

  How to reset the NVRAM on your Mac.

  Reset the NVRAM

  1. Stop your Mac.
  2. Look for the following keys on the keyboard: command (⌘), Option, P, and R.
  3. Turn on your Mac.
  4. Press and hold the Command-Option-P-R keys, immediately after hearing the startup sound.
  5. Hold down these keys until the computer restarts and you hear the tone of starting for a second time.
  6. Release the keys.

  Also, just in case it turns out to be a hardware problem, we want to ensure that there is a current backup of your computer information.  For more information and creating a backup, check out this article here:

  Use Time Machine to back up or restore your Mac

  Best regards

• Multiple tabs open when I clik a link to a new tab. Then, do not open or even appear when I try to close with "close all tabs"... they are like "ghost tabs.

  It spent last few days... the tabs are displayed on the tab bar, but do not open upward or close when I try to close... when I tried "close all tabs", who says so "you try to close the 2 tabs", they are not counted as being open... the only way I can get rid of them is Firefox is completely closed and then it starts again. Ghost tabs!

  I solved the problem, but not using the "safe mode".
  After going into safe mode and close and open FF again;
  I then had to dl the latest version of FFox... 33.0 (I had 32.0) online, a friend told me there was an update for it... found 33.0.1.i and dl who had, then restarted my computer.
  I found that the new version had removed many of my fave on my 'personal bar '... icons I have them back by going to this:
  'Classic theme restaurateur' found in 'modules '.
  I didn't add "colorful tabs" again...

  In addition, an easy solution... my mousepad has been 'sticky'... by removing just, my mouse works much better on my desk...

  now, everything is back to normal... no pop up several tabs, even in typing emails is better now as well.

• Photos of Ghost in picture 1.1 with El Capitan

  Hi people.

  There is a curious problem happening with my Mac Air with pics 1.1 and el Capitan OSX: I have a long backup of photos upwards since 2002 up to today and always followed the improvements suggested Apple, including iPhoto migration into Photos some time ago.

  Now, I realized that a specific set of photos taken in 2014-2015, with an Iphone 5 and imported from a Canon EOS digital camera seems to be there, but is missisng. I mean, they appear in the photo files, have all visible metadata, but the placeholder for the image itself is empty. You can mark them as Favorites, see the metadata of each of them, include them in a slideshow, but they are single spaces. And if you try to export, Photo said that they are not there.

  There are a lot of precious moments of trips that won't again in these photos, and I'm struggling with the idea of losing it for always.  Anyone know the trick to get back them? I have TIme Machine backups since about 2013, but since I don't know when it happened, I can't go back all my stuff for 2014 just to retrieve those pictures. I use the machine to my daily work...

  

  Everything is ok, except for the missing images! Ghost photos!

  Help!

  Carlos Nobre, Brazil.

  You can update the pictures of the current 1.5 version.

  If you have enabled iCloud photo library, they could not synced to your computer. They sow upward when you double-click one of these images to see full resolution?

  You can also try to repair your library by pressing Option + command keys.

• Once I updated to Firefox 11, I can't open the pdf files. It's more the computer, snow leopard and lion and more than one Web site.

  I've updated to Firefox 11 and now I can't open the PDFs Online. This has happened on more than 1 computer, using the two OS 10.6.8 and OS 7.0 and on more than one Web site. I tried to uncheck "block pop-up windows" in preferences, but which did not help.
  When I use Safari to open the same file to pdf, they open fine. Everything worked fine with my Firefox until I did the upgrade.

  I prefer to continue to use Firefox, but I can't understand the root of the problem.

  Has anyone else had this happen as well?

  Thank you, gentlemen, to find a "solution" to this particular behavior of Firefox. It is really curious that even if the screen is blank, you can indeed save the .pdf Ghost and then open the saved file to view. What is amazing to me is that this issue does not seem to be what makes the hit parade of the problems currently experienced Mozilla. Not everyone will be willing to do a research project extended rather than leave the ship for Safari, etc..

• Ghost icons

  Mini iPad IOS 9,31

  I have a "Ghost" icon (library of Panasonic). Not sure why there is a problem in the first place, although the Apple software updated recently, so maybe it's the first cause.

  I tried the following

  Hot and cold reboot with or without icon WiFi remains

  Cannot delete as usual (highlight and press on delete) icon icon rest

  Icon can be removed from the list of applications in the settings

  I tried to reinstall it from App Store (open pressed) nothing happens.

  All ideas

  Not clear what you mean by hot and cold reboot. Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then sign out of the iTunes Store and reconnect.

  If that doesn't help, try a system restore.

  First save your device via iTunes. Import your photos on your computer, and then copy all the important data. Try to restore as new first and test IT. If it's back to normal try restore the backup, however if the backup is corrupt and returns the question, you would have to restore like new again and reconfigure from scratch. It is important to have your photos and your saved data separately from the backup.

  https://support.Apple.com/en-us/HT201252

• How to start the Toshiba Ghost image from the HARD drive files

  Hello

  OK it's a difficult question, but I hope that some tech/wizz can help out me.
  I have all necessary recovery CD but my laptop Toshiba CDRom drive died and I looking for replacement at the moment.

  I managed to copy the image files and all the other info of these CDs on the hard drive to laptop via a network of my cdrom office. I tried to use the Office CD-ROM to start the disk 2.5 "laptop, but he knew it wasn't a computer toshiba laptop so wouldn't let me not repeated.

  However, now, I managed to copy all files from ghost image on the hard disk of laptop I'm stuck on how to run the installation via back.
  The portable hard drive is formatted and all I have are the following files

  span.bmp
  setenv.bat batch file---> contains the following lines
  OFF @ECHO
  SET GHOSTPAR =
  SWN = 01237000 SET
  SET EXT = GHO
  SET VOLLABEL = % SWN
  SET FILENAME=%SWN%.%EXT%

  01237001.GHS---> PART 2 IMAGE
  01237000.GHO---> GHOST IMAGE MAIN
  01237000.CRC

  A folder called G_INST
  which contains 3 additional files BMP, BACK, TOOLS and span.bmp

  I can't understand how I can run ghost extraction and recovery my can drive HARD someone help me :)

  Thanks in advance
  Simon

  I'm really skeptical if you can launch the second partition Toshiba ghost image files without using the Symantec Norton Ghost software.

  I created a ghost of the C partition image and placed on the D partition.
  Recover the C partition to start the utility of Ghost and having to use the file D partition .gho image

  I googled a little and found useful instruction how to recover the Portege M3500 without using a CD/DVD drive. Maybe it will work also on the A30 Sat.
  http://mobilepcwiki.com/MPC/index.php?title=Toshiba/Portege_M3500/FAQ

  By the way: the STRANGE internal, compatible can be ordered from the ASP in your country!

• Tecra M11 - 119 - Win XP crashes when I do a ghost

  Hello!

  Had problems with Tecra M11 119 under XP PRO.

  installation of XP is GOOD and works perfectly, but if I try to do a ghost the computer crash to about 15% (about 2-3 minutes)
  I have successfully install the TECRA S11 with XP PRO and they work WELL, and the Ghost is OK

  Then I try to load the ghost S11 on the M11 and same computer problems at 15% (about 2-3 minutes) crash (this with 2 different M11)
  I try to compare BIOSes S11 and M11, but they are same (not even a version more options the bios S11)

  PS when I say Crash I mean that the decision of any computer.

  What can I do

  Hello

  > installation of XP is GOOD and works perfectly, but if I try to do a ghost the computer crash to about 15% (about 2-3 minutes)

  Does that mean exactly? The laptop hangs when you create an image of partition C or what?
  Could you be more specific?

  The laptop supports the controller SATA HDD did you include the SATA (from Intel Storage Manager) driver to the image?

• TECRA R10 - how to make an image of NORTON GHOST 15 to the network

  Hello

  Here are the steps to enable NORTON GHOST 15 bootable CD make a TOSHIBA TECRA R10 image to a shared network folder. I guess that this same procedure also works on many other TOSHIBA models, but it of the model I and could test.

  (A) download the site WEB of Toshiba drivers following for TECRA R10, Windows XP, LAN drivers (Version INMA20W32W9C)
  File: lan-20081015154144. ZIP
  Link: Link: [http://support1.toshiba-tro.de/tedd-files2/0/lan-20081015154144.ZIP]

  (B) insert a pen drive and create a folder named example * X:\NIC*, where X: is your pen drive letter.

  (C) unzip * lan-20081015154144. ZIP * and a copy of this file on a pen drive only the following files:

  -e1y6032.inf
  -e1y6032.sys
  -e1y6032.cat
  -e1y6032.din
  -NicCo26.dll
  -NicInstQ.dll
  -e1000msg.dll

  (D) not to remove the disk from the pen and insert the CD bootable Norton GHOST 15 on the CD player. If it starts, click option * output *.

  (E) stop your laptop.

  (F) power and on the first moments, press * F12 * display boot source options. Select * CD * icon using the left and right keys and press on * ENTRY *.

  (G) confirm that you want to boot from the CD by pressing any key

  (H) to accept the Symantec License Agreement

  (I) tab left * utilities * and click on entry * load a driver *.

  (J) use the mouse to select * computer * and open your USB (e :))

  (K) navigate to the folder * F:\NIC* and open the file * e1y6032.inf*. You should receive message * the selected driver has been loaded correctly *.

  (L) tab left * network *, click on * start my Networking Services *. You should not receive any error message.

  (M) on the same tab, select * Ping address *. Insert the IP address of your computer and it should ping.

  (N) tab left * House *, click on * Back Up My Computer *, * following * and insert the Norton (e.g. 99-9999-9999-999999) license key.

  (O) to select the disks that you want to backup, then click on * following *.

  (P) click on * Browse Network Neighborhood * select computer and the shared target folder. If necessary, you can create your own folder.
  (NOTE: shared folder must have write permissions.) On my QNAP NAS system, I need add the everyone permission in the target folder.

  (Q) click on * following * and I suggest selecting * check the recovery point after creating * and type a brief description of the State of your system

  (R) click on * following * and * finished *.

  (S) backup starts and ends with the message: * full backup: XX:XX:XX *.

  (T) remove the CD disk and a pen. Click on * output * and confirm that the computer may restart.

  (U) you have now a complete picture of you system, without installing any software. It woks with all versions of Windows including Windows 7 Ultimate 64 bit.

  I hope that this text could be useful to your work.

  Good luck.

  Antonio Nuno

  Very well!!!

  Thanks for sharing your experience with us!

  Could be useful to others!