Computer hangs on the hp screen after installing evga gtx 760

Similar Questions

• Pavillion HP-p6380t: computer hangs on the first screen

  Have HP Pavillion HP-p6380t (bought in 2010) which hangs to the first screen and does not start. The computer is progressing to the point where a repair disc may start or keyboard and mouse can operate. It stops just dead in its tracks. Need help.

  Solved! Read in Google search to disconnect all USB connections. First disconnect the computer went to start. Can't say why it worked, but I'll take it.

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• When I restart Windows 7 home premium, the computer hangs on the bios screen.

  I don't know what exactly when this problem started, but I can stop the machine and it will start normally.  If upodates are installed and the machine restart it hangs at the bios screen all the time.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Debug build hangs at the splash screen after Update Beta 4

  Since the update of the fall of November, debug builds Dev Alpha hang at the splash screen.

  By release notes, on the basis of known issues:

  "AIR debugger cannot display the IP host dialog box when a debugging session is initiated. This can cause applications to hang at the splash screen and fail to launch. (240219, 242986) »

  A workaround solution is given for people running Flash Builder, where you explicitly give the Debug IP address host instead

  in relying on the auto-discovery.  I use the command line flow (don't have Flash Builder), and my debug builds that were operating out of now drop from September to the start screen. -DebugHost 169.254.0.2, I added to my blackberry-airpackager command and the debug builds always hang.  Release builds signed with my symbolic debugging normally launch, as they did before the update to the decline in November.

  For people who use Flash Builder and who know how to look under the hood and find the blackberry-airpackager command that distributes when you do a debug version: to debug this launch is built successfully

  on a Dev Alpha with the November update, can you please put the blackberry-airpackager command line which

  Flash Builder is running?

  Got a reply from them and they confirmed that the dialogue will be back. Let's make it a part of our test cases in the future.

  See you soon,.

  Dustin

• Tecra A8-ez8512 freezes on the splash screen after installing Win XP

  Hi guys, this is my first post!

  I recently had an opportunity Tecra A8-ez8512 as a gift that had Vista Business installed (and works perfectly!). As a passionate XP user, I quickly decided to format the WHOLE hard drive and then install XP Pro SP2.

  After the format was successful and cleaned the entire hard drive, I put my xp cd in the drive and rebooted the laptop ready to select the boot cd.

  But now it crashes right on the home screen with no small slider under ratings to select a boot device. I pressed on the key board, but nothing happens.

  I noticed little black dots on the white part of the Intel symbol shortly after. What does that mean?

  Can someone please give me some advice?
  Thanks in advance

  Hello

  No idea what the black little dots on the white part of the Intel symbol might be a graphics card problem? ?:| who knows.

  But I m bit confused said you you formatted the HARD drive first, and then you insert the Win XP disk in order to install Win XP
  How you format the HARD drive without the use of the Win XP disc?

  Secondly, it would be interesting to know if you can install the operating system using the Toshiba recovery disc.

• Pavilion p40 fails to start after installing a gtx 760

  Hello

  I recently bought a new graphics card, the power and the case to my p40 pavilion in.

  Move the computer to the new case went very well, I installed a new PSU to power the 760 gtx.

  Also: nothing blew up, which is nice.

  But after the installation of the card and all wrap, start the computer fails. The message appears but freezes, the access to the contents of the bios while the card is installed with internal graph is impossible.

  My question is: Y at - it no way to update the BIOS that can solve this problem?

  Thanks in advance

  Thank you
  

  The problem you are having noted above and seems to be a problem with the new maps video PCI-e 3.0 and your motherboard. There was a discussion of the present in a thread at Overclock.comwith the link provided by @TheOldMan .

• Computer laptop HP G72 freezes on the bios screen after installing a replacement battery.

  After you have installed a spare battery, my G72-259WM freezes on logo screen or bios of HP. If I tap to shut down the pc, unplug the unit and remove the battery. Then, re-insert battery the pc boots fine. When I stop still, I have to go through the same process. I tested the memory strips to be good and have replaced the HARD drive (the original had questions) to a WD Scorpio Blue 500 GB. Everything works fine once the pc is started. Is it due to being of a batterty of spare parts? or is there anything else that might be causing it?

  Its quite possible that battery is causing this issue since it has never occurred before the battery. Use this link to run a self test on the battery: test of a hard disk by using the Built in Self Test

  Let me know what results you get from the test.

  Thank you
  Sean

• MacBook Air 2015 is stuck on the loading screen after installing the update.

  I installed the updates on my MacBook Air and when I restarted the loading bar would stay right in the middle. I used the disk utility in recovery 'first aid' my drive mode, it was fine. I tried to start in safe mode, but the loading bar cling just at the end I reset the PRAM, but nothing works. Help, please.

  * Loading Bar *.

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

• Problem with the brightness of the P500 screen after installing Windows 10

  I installed Win 10 yesterday. I can't change the brightness of the display since then.

  I have the latest version of the driver for display, as adapter dated July 2015, which was installed by windows 10.

  I tried to install the old driver for Lenovo site display adapter. But 10 Windows does not accept that.

  I appreciate if you can help me!

  I just installed a driver that solved my problem. Go to this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/any-Windows-10-Intel-Core...

  It's wonderful!

• After that windows update computer now hangs at the login screen, no error message, just restarts.

  I have tried safe mode, does the same thing; tried to use the Windows Vista disc to do a repair, no luck; also I tried restoring the system (from disk), no restore points however.
  The problem appeared after restarting the computer during the night.  The problem began to be able to connect, but the screen would go blank with just a pointer (KSOD).  Has tried some of the suggestions on this problem, including by eliminating sys newspapers, which did not work as well as reinstalling the video driver, with no luck.  Finally tried a system restore, returned 1 week (before the windows updates).  Now, the computer becomes just the login screen sits there for about 5-10 seconds then restarts immediately.

  I just had this happen to my laptop that has no external references. This is a new (September 09) ASUS K50ij with Vista 64-bit installed. I bought the Win 7 OS to replace, but have been waiting for the time to play with it... Last Monday, the update itself and invited to restart so I have done what I was busy with and enabled him to restart which is the only thing to do now... restart, the blue screen for a nano-second, then restart... etc. Same problem with safe mode and safe mode with networking, or with the box... anyway, someone very smart recommended that I use another computer (Fortunately, I have several) to download free Imgburn (which works easily), then get Ubuntu (Linux Operating System free download) burn image from the Ubuntu disc, put the disc in the drive of the computer crashed (there is a little hole next to the button you) can insert in a safety pin to release the door when the power is off) change the setting in the BIOS of the computer has crashed by restarting and pressing F2 until you get the menu BIOS... go to the start menu and choose Start from the CD, and then press ENTER. When the computer starts, it will see the drive and go to a menu to select the language, then next choice is "try Ubuntu without making any changes to the computer. It will boot the disk and allow you to view and copy ALL your files off the power on an external drive, which is what I did... including my Outlook .pst files that include all my saved emails my calendar and contacts, etc! WOOHOO! has got all my photos, documents, etc. The only thing that I didn't know how to get is my favorite... How to enter in the browser from another computer.

  If after this, an hour or more than make sure I got all the important data... I decided to see if anyone had a solution to this problem just fixing... I probably won't update again because Microsoft sends them and offers no solutions to the problems they have caused and nobody pays me for all the time I've lost get to get my stuff back and also to solve the problem they have caused. A update on my other laptop Win 7 zapped my outlook program and even reinstall it didn't solve this problem, even more work to do there, but looking in the files using Ubuntu's File Explorer, I found a hidden file that is used to repair the files .pst outlook called scanpst, or something that nearby.

  In any case, if someone has a solution to uninstall the recent update or to determine how it corrupted my user profile (which is the general consensus) please let me know.
  Thank you and good luck to you!

• Windows XP hangs at startup on the logo screen after modified registry authorization

  I've changed a registry permission setting in WinXP SP2.  Now after reboot, the computer hangs at the boot logo screen. He never to the logon screen. Same thing when I try the Safe Mode or Safe Mode with network.

  Registry permission that I changed was in HP_CLASSES_ROOT. Permissions\Advanced\Permissions: Unchecked "inherit from parent the permission entries that apply to child objects. These entries include explicitly defined here. »

  This is apparently what has caused the problem. I would like to reset the permissions, but obviously cannot access permissions check without going into windows first.

  Help please?

  Thank you - the procedure to restore a damaged registry.

  The reprimand, however, is not necessary.

• STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]

  As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My computer keeps going back to the logon screen after a few minutes

  My computer keeps going back to the logon screen after a few minutes

  Hey Missy,

  In addition, you can go through this post.

  The main reasons for this problem is a corruption in the registry key that contains the value of the files that are executed during the connection to windows. This registry key can get is replaced by an incorrect value, or it might get corrupted due to a virus / trojan activity.

  See if you can solve this problem by running SFC (System File Checker) scan in safe mode.

  Step 1: Start the computer in safe mode

  Using safe mode, see: start your computer in safe mode

  Step 2: Scan SFC

  This analysis relationto with system files integrity problems and trying to fix the same. If the scan does not automatically, you can try to repair these files manually. Detailed information is available here:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.