Computer hp laptop T5R13PA: failed disk hard dst short!

Similar Questions

• Computer HP laptop-15-r101na: disk hard Imminent failure

  I've had this laptop for a month and after about 2 weeks, I received a message at startup telling hard imminent failure. I backed up all my data and run the hard drive tests.
  Hard drive tests immediately to find a failure and gave me a failure ID but no resolution.
  
  I am currently using the laptop as usual, but with an external hard drive connected to the caution. The hard drive has not yet failed, but the message remains displayed.
  
  I'm a bit confused what is wrong and why it seems to not resolved itself?
  Any help would be appreciated?

  Hey Jake,

  You are probably still in warranty.  Make sure you have backed up your files externally and contact hp support.  You will need a replacement of the hard disk.  Sorry to hear that you have problems, happy, that they performed while you are covered.

  -wes

• Drive hard DST Short failed

  Hello

  I have Netbook, HP Mini 210-4000
  Product number, A9R56PA #UUF

  Here is what happened. Last month, my hard drive failed. He was still covered by the warranty, so I let them check my netbook. They replaced my hard drive. Only Windows 7 Starter has been installed, no HP software included. Last Friday, I restored it to its factory program using the recovery disk and it succeeded. A day later, when I stopped my netbook, Windows updates installed. After this update, when I tried to open it, it took forever to start upward.

  I run the start-up test and is showed:

  Processor Check: PAST

  Memory test: PAST

  HDD SMART Check: PAST

  Hard drive short DST: FAILURE

  FAILURE ID: RLX7G0-61U6JE-MFPX01-60U203

  PRODUCT ID: A9R56PA #UUF

  Hard drive 1

  * Is there something I can do with it? Moreover, my warranty has already expired.

  I would really help. Thank you!

  I suggest to call HP to see if your hard drive already replaced has a warranty on it. If so, they should be replaced even if your warranty has expired.

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck

• Satellite C660 - 1J6 Win7 installation failed - disk HARD disabled controller

  IV received a toshiba satellite c660-1j6.
  The problem is that the hard drive has been deleted (including the back upward). I don't have any of the Toshiba backup disks, but I have new copies of win 7 home prem and xp pro. However when I try to install win7 that I get as far as selecting the installation drive and I click on the drive and I get the message about how windows cannot be installed to this disk please check the drive controller is enabled.

  IV check the BIOS then several times and I can't find anything to do with it apart from the Mode of the SATA controller and which dose nothing.
  The Toshiba tech support when no help at all. so is locked HD or BIOS, and is it possible to unlock them so I can install the o/s?

  IV tested the drive by hooking up a PC desk top and installing windows like that, but as soon as I put the drive in the laptop it comes up with no installed new o/s

  Can anyone give any help... or even indices, iv it for a week now and im going crazy.

  Hello

  HARD drive is not locked. You can install any OS on the HARD drive.
  Usually, the Windows 7 operating system already contains the SATA drivers that are required to see the HARD drive. So it of not necessary to include the SATA drivers while installing Win 7. You said that you have a copy of Windows 7 disc. Is this an original disc for Win 7 complete with functional Microsoft?
  I ve installed several times Win 7 on my Toshiba notebooks and didn t need to use SATA drivers

  In the BIOS, you have found the SATA controller mode. This should be set to AHCI. You can change this pressing SPACE.
  But also the default BIOS settings should do the job.

• How to download again my CS6 on my mac computer, after that my failed drive hard mac and now I have repaired by placing a new hard drive?

  I bought Adobe CS 6 Adobe online in 2011/2012. My hard drive on my mac failed. do not have backup. Now I changed the hard drive on my mac, then I logged on my adobe account, impossible to find the link to download my purchased product

  I would like to re - download my CS6 on my mac that was set after it failed. But could not find the download link on my adobe account. And I'm not interested in creative cloud membership.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.1.1 . 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 |8 mac | 7 mac

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

    
    

    [moved from Creative cloud download & install download, installation, commissioning]
    

  • Downgrade to Windows 7 computer Vaio laptop, can't find hard

    I have a Sony Vaio model SVT13124CXS and followed all the instructions to upgrade to Windows 7, but in the window to select the disc to install Windows 7 there is no hard disks in the list.

    Followed instructions:

    (1) https://us.en.kb.sony.com/app/answers/detail/a_id/37582/p/48903, 49902,71318, 71333/c/65,66/kw/Windows...  (how to move to Windows 7)

    2) http://esupport.sony.com/US/p/support-info.pl?info_id=1313 (Windows 7 clean install) - this is where I'm stuck, cannot select the drive to install Windows 7, the list is empty.

    It seems that the key bootable USB that you use is not compatible legacy mode.

    You have any windows media use alternately?  Or, have you try to start the pen in UEFI mode?

    I have this will increase to engineering for other suggestions.

  • Windows 7 upgrade failed - disk HARD recovery does not work

    I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

    I tried to do a system restore from the recovery of HARD drive partition - and it won't!

    Can someone, please?

    Hello

    Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

    I guess you want to roll back to Vista preinstalled Toshiba.
    I think in your case, only the recovery disc will help you.

    Welcome them

  • HP 2000: Hard Drive DST short verification failed.

    Hello. Since last Monday, my laptop froze on me, which forced me to hard stop. When I tried to turn it back on, it takes me to the HP logo with the rotation of the circle, but it doesn't take me anywhere. When I waited 5 minutes, a really quick blue screen pulls up with a sad face emoticon, saying: "your PC has encountered a problem and needs to restart." We are only collecting the error information, and then we'll restart for you"(I took a photo of it the second time I restarted and this post pulled up to read since the message was for a second). So that it restarts and pulls up the HP logo with a message saying "automatic repair". After a few seconds, it brings me to a black screen that takes me anywhere I left on for about 2-3 hours (I had work) and she still had the black screen. I tried to go to Safe Mode, still need me "Auto repair" and black screens. I searched the Internet for help, one of them told to press F2 at startup so it can pull up a menu to analyze the material. When I went to System Tests > extended Test, it took 3 minutes or more to complete, saying that he failed. The information there was:

    Hard Drive check short DST: FAILURE

    Failure ID: Q0ADB0-6RX7MQ-MFGJWK-60RW03
    Product ID: E0M14UA #ABA

    I'm currently waiting on my repair disc since some sites it suggested before a factory restore. I really hope it is not a complete restoration, many of my school files and important data are there. The repair disk is going to help me, or is there another solution before a full restore? Thank you.

    Edit: I was wondering if I actually do a full on my computer restore if all else fails, is still a possibility for me to back up my data, even if I can't get past the boot? Is it possible to do this action in the menu entry? As the menu of the BIOS, etc? If the material does not affect the memory, or if they are identical.

    DST check: Fail = disk hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example you have a > 500 GB hard drive , so that you could use a 750 GB but not a 320 GB hard drive.

    Your files may be lost. The best hope to recover them will be to remove the drive hard, install it in one >USB HDD Enclosure, then plug it into the usb port of a working computer. If there is any life left in the drive, you should be able to go through it and copy files off the power on a hard drive of the host computer.

    Your > & Maintenance Guide will help to remove/replace the hard drive.

  • Could not start, laptop computer, disk hard short DTS test failed

    I am currently not able to start my laptop properly. I have a HP Pavillion G6.

    When I start it, it stays on the screen with the HP logo and a black background for awhile and eventually get to a black screen with the cursor visible and mobile, but unable to do anything else.

    I tried to press F11 at startup to restore the factory settings, the system recognizes the key but leads straight to a black screen that I left it for several hours, but nothing happens.

    I have gone on the menu of system diagnostics and run a quick test that revealed the Hard Drive DST short, Check failed.

    Will I need a new hard drive? Or is it possible to fix it?

    If I need a new, where can I get one from?

    Thanks for any help

    Hello

    The short drive Self Test (DST) failure would indicate that hard is defective and must be replaced.  This is also consistent with recovery and startup problems you describe.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook series g6 Nr - see here for an explanation.

    Kind regards

    DP - K

  • PC laptop Pavilion 15: generic gel is "check DST short of hard drive: failed.

    I plug a laptop Pavilion June 15, 2015. for a year, it was working fine but a few days back it started to receive generic freeze. I tried to find the answer on google. in an article I have suggested I do a check of the equipment. I did and found this...

    verification of DST short of hard disk: failure

    failure ID: RUO17D - 7517Q 7 - MFPV61 - 6OSTO3

    Now I don't know what to do next?

    can someone tell me what is the real problem and its solution too.

    Thanks in advance.

    Hello

    Basically, your hard drive is defective and must be replaced to correct the defect, if you are still in warranty please see the link below for details HP will verify that your hard disk has failed by using the ID of the failure.

    http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

    If you are out of warranty, you will need to replace the drive yourself or take to a COMPUTER shop local (Hp also out of warranty work)

    James

  • HP touchsmart tm2 laptop: DST short hard drive failed

    Because my laptop was not start (only a blank screen to come), I ran the advanced diagnostic by pressing F2 while bootung.

    After you run the disk hard test the short DST failed with the ID PLVLWC-4G24HG-XD6VSG-60TP03 failure.  The laptop is out of warranty. I did the hard reset by removing the battery power button & pressing it showing positive results. The hard drive is repairable or do I replace it? Pls advice

    No repair of hard drives; they must be replaced.

    See page 41 manual Service here:

    Manual

    It can use any hard drive portable thick 9.5 mm standard 2.5 inch wide and I recommend that you get at least a disk 7200 RPM like this:

    http://www.Newegg.com/product/product.aspx?item=9SIA2W014M8024

    You have made the recovery disc? If this isn't the case, post back for help in reinstalling the software.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • TouchSmart 15-d053cl: disk hard short DST Test failed

    Hello

    Recently, my computer froze completely, and I stopped him with a long press on the power button. When I turned it back on, Windows would not start. It would not start for a very long time and finally the hard drive would become inactive. I open the BIOS diagnostics and ran a test of the system. I got the following error message:

    Test of DST short hard disk failed

    Error code: RLLFTT - 7717 ST-MFKR6J - 60S 003

    Product ID: F5Y25UA #ABA

    Does this mean that my hard drive is defective? Since I've been able to boot into Windows, but it runs a lot slower. Do I need to worry? I ran Chkdsk, but he finds no errors. My files are still in place and I am able to access very well. What should I do about it?

    Thank you!

    KP

    Kpenguin wrote:

    Hello

    Recently, my computer froze completely, and I stopped him with a long press on the power button. When I turned it back on, Windows would not start. It would not start for a very long time and finally the hard drive would become inactive. I open the BIOS diagnostics and ran a test of the system. I got the following error message:

    Test of DST short hard disk failed

    Error code: RLLFTT - 7717 ST-MFKR6J - 60S 003

    Product ID: F5Y25UA #ABA

    Does this mean that my hard drive is defective? Since I've been able to boot into Windows, but it runs a lot slower. Do I need to worry? I ran Chkdsk, but he finds no errors. My files are still in place and I am able to access very well. What should I do about it?

    Thank you!

    KP

    Your hard drive is defective and must be replaced.  You can continue to use your system as-is, but it will continue to get slower and, possibly, you will have problems to start as you have done before.  It is recommended that you back up of your data (photos, documents, etc.) on external media (flash drive) and then replace the hard disk.  After replacing the drive hard, you have to reinstall the Windows operating system using the HP recovery media.

    It is not very difficult not expensive to replace the hard drive, so we can walk you through it.  If you are in warranty, you can contact HP for replacement parts.  If you are out of warranty, then you need to buy a replacement hard drive and the HP recovery media.

  • laptop HP 2000: drive hard short dst failed

    Can someone help me understand what that means? I have a laptop HP 2000. Windows 8.

    Test drive: 1
    SMART hard drive check: PAST
    Hard drive short DST: FAILURE

    Failure ID: 64M7SX-6GT7Q1-XD6X1F-60RS03
    Product ID: C2M21UA #ABA

    Hard drive 1

    DST: no way, the hard drive has failed and needs to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  • Hard drive DST short test failed

    My HP Pavilion dv6-6c35dx laptop computer fails to load Windows. I ran diagnostics and got a quick access error (303). HP UEFI Diagnostics for hard drive failed the DST short test with failure code MBX47F 0006QU PXGK01 QT 60 03. Does this mean I need to replace my hard drive? Product ID of my laptop is A6Y53UAR #ABA and I have Win7-64 installed on it.

    Thank you

    Claudine

    Hello

    Your laptop is listed as coming with a HARD drive from 640 GB, but given that there is little difference in cost, you can replace this with a 750 GB option.

    The player at the link below is an example of one that would be perfect for your laptop.

    750 GB hard drive for laptop.

    The procedure to replace the hard drive begins on Page 64 of your maintenance & Service Guide.

    ***************************************************************

    Regarding the reinstallation of the operating system, you can create your own installer of Windows 7 USB drive flash as follows.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    Using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below--these Images are of a very respected source (Digital River).

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Once completed, use the Microsoft Tool on the following link to create a USB bootable Windows 7 installer - you will need a 4 GB flash for this drive.

    http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    When creating, tap away at the esc you key start Notepad to open the Start Menu.  Insert the Windows 7 flash player.  Select the Boot Options menu (usually f9).  Use the arrow keys to select the flash drive and press ENTER.

    If your laptop will boot from it, use the flash player to perform the installation, enter the activation key for Windows on the label of the COA in the request and once the installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without the software load extra normally delivered with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You may need, additional drivers and software are here.

    Best regards

    DP - K