COMPUTER INTERMITTENT / REPEATED stop

Similar Questions

• Windows XP crashes intermittently when stopping. Stuck on the screen with the default windows background color and the mouse pointer.

  We are an OEM that systems of electronic Assembly is based, in our machine is a PC running Windows XP Professional that provides the interface for the operator. Some of our systems have begun to crash intermittently when stopping.  Up to now we have seen it on three machines.  There has been no change to hardware or drivers that we put on these machines.

  The PC is supposed to stop at the point were he said "It is now turn off your computer", but it hangs when the only thing on the screen is the default windows background and the mouse pointer. The mouse moves, but that's all. He is unresponsive to ctrl-alt-delete, or any other entry.

  This was reported 5 times, and in any case there's nothing in any log file which would tend to indicate where the problem is maybe.

  I guess we have a bad driver or device, but the problem only happens once all stops of 5-10, and only after the machine is turned on for a while.

  I just turned on the detailed status messages, but they did not stop the machine since.

  What I asked is: is it possible to get windows to connect to all events stop? I really want to know what he was doing when he stopped.  Can someone else think something I can look at, or a better way to debug this?

  Re: a suggestion on this new monitor to 'prove' is the source of the problem
  Disconnect it, connect a type non-ecran touch "ordinary".
  stop/restart in safe MODE, make sure that the old monitor is not appear in the Device Manager [what we used to call a ghost]
  If it IS, delete it & uninstall the sw provided with touch screen
  Reboot in normal mode
  Try a stop
  If you get the old orange it'S now SAFE, tell the seller about IT.

• I turn on my computer, and it stops, "No Signal".

  I turn on my computer, and it stops, "No Signal".  I do 5 times before windows will actually go up.  What can one do to fix this?

  original title: no Signal

  Hello Donna,.

  What version of Windows you are running on your computer?
  Receive no specific error message?
  I recommend watching this thread because it's a problem similar to what you are experiencing:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/PC-shuts-down-immediately-after-boot/8a0bb872-68fb-4b4a-8869-c3721ffe252f

• my computer becomes a * STOP: 0 x 00000050(0xf226dc2E,0x00000001,0xEE6SSF10,0x00000000) screen and States blue, I don't know what to do about this

  my computer becomes a * STOP: 0 x 00000050(0xf226dc2E,0x00000001,0xEE6SSF10,0x00000000) screen and States blue, I don't know what to do about this

  It is the same procedure.  Have you checked all the links in the post?

  I want to thank you for your time. I couldn't hardly on internet. Microsoft helped me and fixed it is a program that was not compatible. Thank you once again

• Install update of security KB2647516 for IE 8 for Windows XP almost brought my computer complete the stop

  Install the 14/02/12 KB2647516 a security update for IE 8 for Windows XP almost brought my computer to complete stop.

  Took minutes to get any site. Extremely slow...

  Uninstallled le KB2647516 even and it's back to run again correct.

  Leave this update uninstalled until I learn how this can be corrected.

  Thanks, Mike

  Hi Mike,.

  This issue could be related to firewall or third-party security software. I suggest you put your computer in a clean boot State, and check if the problem persists.

  Note: The steps in the article to restart your computer as usual.

• Stop the computer several times the error: "a script slows down your computer. It stops.

  Original title: SCRIPT SLOWING COMPUTER

  COMPUTER STOPS SEVERAL TIMES.  A MESSAGE IS READ "A SCRIPT SLOWS DOWN YOUR COMPUTER.  IT STOPS"AND IT MADE A

  Hello

  1. when exactly you get this error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: I suggest to restart the computer and keep tapping F8Key since the boot advanced options, select Disable automatic restart on system failure and press to enter.

  Method 2: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 3: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Date and time resets each time the computer restarts, or stops.

  Date and time resets each time the computer restarts, or stops.

  Date and time resets each time the computer restarts, or stops.

  Re-define at what time?

  If you back up battery is faulty, and when you shut down the computer, the machine doesn't have enough 'juice' to operate. Thus, when you restart it, time will show either bad timing or outright from the date it was setup to the factory.

  TME to check or replace the battery.

  t-4-2

• computer does not stop the on-screen keyboard. It is whenever I log on my profile and will not stop. How do I stop?

  computer does not stop the on-screen keyboard.

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  Read the tutorial above.

  You can prevent the Visual keyboard facilitated access to automatically
  When you load Windows by disabling "use on-screen Keyboard.
  checkbox on the page "Use the computer without a mouse or keyboard" in the
  Ease of access Center.

  Open Control Panel > accessibility > Ease of Access Center > use the computer without a mouse or keyboard.

  See you soon.

  Mick Murphy - Microsoft partner

• my computer vista laptop stops working

  my computer vista laptop stops working. It starts ok and allowes me to choose my user account, then it loads to the top of my page with all the desktop icons and wellcome page, then it stops working. How to solve this problem? Thank you!

  LTCRay,

  If the problem persists in Mode without fail, it is very likely that the system has been infected.
  You can take a look at the post of PA Bear on the removal of the malware on this thread:
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275
  Remember that you may need to removed the hard drive from the system to scan for infections.
  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• . What's wrong? COMPUTER WILL NOT STOP UNTIL I hit Cancel or end of program. What program?

  When I hit the stop icon, to turn the laptop off a window notification window notification saying-end-support from the framework programme. Program does not, click on cancel or end of program. Computer does not stop until I have click on program ends or cancil, which I do not know what he's talking about? The Task Manager is not apear when I hit ctrl, alt, delete togther. It does not appear? Thank you

  Hello

  Are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the article to put your computer to a normal startup

  Method 2:

  Check out the following link.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  I hope this helps.

• Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image

  Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program

  Hello... Adobe, you have a phone number I can call to talk about this?

  Why don't answer you my survey?

• Computer crashes repeatedly on startup according to office. Need to hard reboot stop

  After a reboot, the computer hangs at the office during the loading of system tray.  The mouse freezes as well.  Computer is in need of about 3 or 4 stops/restarts difficult before it starts successfully.

  This could be hardware such as a failure of power supply or the hard drive or software such as malware. There is no way to say here that it is.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you are able to go in Mode safe without any of the problems you describe, then make sure that the computer is clean and then do boot in diagnostic mode.

  Clean boot in Windows XP - http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advanced http://support.microsoft.com/kb/316434
  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  MS - MVP - Elephant Boy computers - don't panic!

• I'm putting a game on my computer and repeat me setup.exe has stopped working

  I'm loading Jewel quest games on my computer.  Whenever I start a window appears which says setup.exe has stopped working - please help if anyone has any ideas to try

  Hi shellyart,

  ·         What is the exact error message?

  ·         Have you made changes on the computer before this problem?

  ·         What version of Jewel Quest you trying to install?

  Follow these methods.

  Method 1: Run the game as administrator.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-allow-an-application-to-run-once-with-a-full-administrator-access-token-in-UAC

  Method 2: You can also try the game in compatibility mode and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  For reference:

  Quest http://www.Microsoft.com/Windows/Compatibility/Windows-Vista/Search.aspx?type=Software&s=Jewel

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-mark-an-application-to-always-require-a-full-administrator-access-token-user-account-control

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

• Sansa clip cracked screen and need help turning repeat stop

  My screen is cracked and I can not afford a new mp3. Unfortunately, it's the repeat mode 1 song when he cracked.  I just need a procedure step by step to how to repeat offshore.  I don't see any of my screen. I would also like to know how I could put it on playall instead of just a song mode.  I tried to reset it but it doesn't work. I'll be away from my own computer for a few months, so I would rather not format because I lose my original songs that I have on this subject.  I also have an audio book on it then a procedure step by step on access which will be useful also.

  Hmmm I don't know how useful it will be: do you see anything on the screen?

  My version of firmware on the clip is: 01.01.30a

  Starting point:   When I turn on my video it automatically starts playing my last song and obeys the shuffle / repeat options.

  By pressing the menu key small I will be positioned on the music

  Music (headphone icon) ... If I click the bottom , I get the following menus:

  FM radio

  Voice

  Parameters

  Music (back to music again)

  If I click Select on the music , I get the following features:

  Play all

  artists

  Albums

  Songs

  Kind

  My best rated

  Playlists

  Podcasts

  Audio books

  records

  Music options

  Play at all (and back to play at all)

  If I'm playing together and the song: each arrow pointing down will give you the following:

  Back to the list of music

  Add song to Golist

  Rate song

  Shuffle (stop / market)

  Repeat (All, Off, song) *.

  Music EQ

  Clear Golist

  Delete the song

  Back to the list of music (then return to the list of music once again)

  If in this menu, I click on the right arrow on repeat * for every time I press the right arrow key, I turn the 3 following options

  All the

  Off

  Song

  Allows you to start with the Clip off: so: If your clip is on... turn it off...

  If your clip is now disabled, start by putting on:

  then click on the small menu button

  then click Select

  then click Select again to play all the music

  Wait a few seconds and the songs should begin to play.   or if its on UN-pause pause, there click on place

  To change the repeat function: while playing a song...

  Click Select

  click the bottom 5 times

  then to change click on repeat right options will be all out, song and start over with all, off, again song.    This will start with whatever the currently set option.

  So if his game to repeat the song. click on the right change to repeat all, right click to change to repeat Off

  Click Select = the middle button on wheel

  Hope this helps, reply back if it did.   and I'll look audio books, the next time or someone else could

• SLOW computer: "xoutzoi has stopped working".

  My Dell inspiron 1525 with Windows Vista has started running VERY slowly overnight. The mouse is too nervous. I get the message: "xoutzoi has stopped working". Sought to find xoutzoi & see that it is in the Elf AppData/Roaming in a folder called 'ozzuvao '. I'm NOT a computer expert (as you can probably just of my question). I wonder if I can remove the xoutzoi from the computer or if it's necessary. Advice on how to solve the problem would be much appreciated.

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the button F8 repeatedly until you are presented with the Windows Vista Advanced Boot Options.
  3. Select it Safe Mode with the option of networking using the arrow keys.
  4. Then press on the key on your keyboard to start Vista Safe Mode.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

     Once in Safe Mode with network, download and run RKill.

     RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

     http://www.bleepingcomputer.com/download/rkill/

     Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

     http://www.Malwarebytes.org/products/malwarebytes_free

     @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

     And also scan with the free version of SUPERAntiSpyware

     http://www.SUPERAntiSpyware.com/download.html

     SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

     SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

     @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

     THS is a very good program to scan your system to remove adware, etc.:

     http://www.bleepingcomputer.com/download/adwcleaner/

     AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

     @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

     And just to be sure, nothing is lurking in the background:

     'TDSSKiller Rootkit Removal Utility download for free'

     http://USA.Kaspersky.com/downloads/TDSSKiller

     ABon the Defender being turned OFF

     With MSE installed Windows Defender is supposed to be disabled.

     MSE has been designed with its own version of Windows Defender under its own program.

     If the two were running, it would cause system conflicts.

     ___________________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click all programs, click Accessories , click command prompt and then click Run as administrator of . If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  2. Type the following command and press ENTER:
     /ScannowThe SFC sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

     If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

     If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

     "How to perform a repair for Vista Installation"

     http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.