Computer just Shut Down

Similar Questions

• Explorer.exe stops when the computer is shut down

  Explorer.exe stops when the computer is shut down

  Hi DickKimberley,

  ·         What exactly happens when you try to shut down the computer?

  ·         You receive an error message error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Method 2: If the method above doesn't follow the article mentioned below.

   

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  Let us know if that helps.

• My computer guard shut down after use of a few minutes.

  My computer guard shut down after use of a few minutes. When I re - start insiders 'fix the beginning upward.'

  Startup Repair FAQ: -.
  http://Windows.Microsoft.com/en-AU/Windows-Vista/startup-repair-frequently-asked-questions

  See also:
  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-keeps-shutting-down-without-warning/1963241a-A4C5-4BDB-8bdf-b3e95245bfa8

• Satellite Pro A200-PSAE4E - computer laptop shuts down randomly

  I've had my Satellite Pro A200-PSAE4E for about a year and a half now. He ran very well most of the time, but in recent months he has been stop itself randomly. There is no warning or "Windows is shutting down" he just me using my computer to a blank screen.

  After frustrated with her, I did a full format my HARD drive and started from scratch. This does not solve the problem, and since then, the taskbar freezes. When I click on it I get the error and the hourglass cursor message "Windows Explorer is not responding... "I then have to click"restart", which makes the taskbar disappear for a few seconds before returning (usually without my sound icon).

  The laptop turns off when it is connected to the electric network with & without the battery and when running only on battery, so I excluded all power problem.

  I have considered it heats up too, but I use a block of cooling with built-in fans and has not himself in a few minutes after being hit not 24 hours, so I'm not sure that's the problem.

  Someone at - it ideas?

  I am running WIndows Vista Home Premium 32-bit if that's any help.

  Thank you.

  > It worked fine most of the time, but in recent months he has been stop itself randomly.
  > There is no warning or "Windows is shutting down" he just me using my computer to a blank screen.

  I think that the problem of overheating.
  The fact is that the laptop would be down automatically stops in order to avoid that the pieces of equipment against damage.
  In most cases this problem can be solved very easily. Using a jet of compressed air, you can remove the dust from the cooling modules and fans.
  I clean my fans from time to time, because I noticed a higher temperature and the laptop was a little stronger.

  Check it out mate

• Updates required when the computer is shut down.

  "I get ' 7 required updates" message every time I want to shut down my computer.  Is there something wrong somewhere?  If so, how can I solve this problem?  It seems a little fishy to me that there are still 7 upgrades necessary.  Thanks for any help you can give.

  "I get ' 7 required updates" message every time I want to shut down my computer.  Is there something wrong somewhere?  If so, how can I solve this problem?  It seems a little fishy to me that there are still 7 upgrades necessary.  Thanks for any help you can give.

  Update in Windows and connected to the Internet with a little time on your hands and knowledge.

  Open Internet Explorer, go to http://windowsupdate.microsoft.com/ and do CUSTOM scan and determine what updates you need.  Install them.  Reset.  Repeat the visit, CUSTOM and see if updates (one of those that you just installed) back upwards.  Just list those here (KB #)...

• Satellite A300-1EC cannot load the OS and restart just /shuts down

  Can you help me with my problem of A300 PSAG0Elaptop.

  This is the case:
  before that I can still use my laptop normally without plugging the power cord but when plug the source ca the unit restarts all of a sudden. I charge the battery only when the unit is off. And now the worst case gets when I installed the recovery disk hoping would solve the problem. I can no longer load the operating system; It's just loading then it does not load and suddenly shuts down and sometimes simply frozen. I have not tried the safe mode, mode ahci, system recovery, system repair, and stil no chance.
  I brought this already at the center of ASP service and they demanded almost 1 unit brand new laptop for repair of my laptop is not advisable to send them to repair.
  I doubt that my system bios is not compatible with my vista Home premium OS, or perhaps my wife update of the bios that is not compatible in windows update. My current bios I checked is 1.4

  Given that I have no option instead of junking my laptop, I want to update or back to the original settings of the bios that can help to repair my device.
  Can you help me on how to update or revert to the original my system bios? As I can't access the windows can you teach me step by step using the usb port of my camera on system bios update? Or do you have any suggestions?

  Need help bad
  Here are the specs of my unit
  A300-1EC
  P / N:PSAG0E - 02J025AR
  Windows vista Home premium core 2 duo T5750

  Hey Buddy,

  First of all, the BIOS can only be updated Windows System. There is no other version that you can download on the site Web of Toshiba.

  But I doubt that this problem is caused by the BIOS. It s I knew not that it is possible to change certain values which make impossible Windows installation. With other words BIOS is secure and with all the settings, it should be possible to install Windows.
  An alternative you can press F9 in BIOS to load the default settings. That would be the best option.

  But according to your assignment, if Windows installation of recovery disc doesn t work and you are not able to charge the battery while the laptop is turned on it seems to be a hardware malfunction because seriously it has nothing to do with the software.

  So either come you into contact with the ASP to get the repaired device or you can repair yourself with original spare parts with parts ASP or second-hand on eBay or similar platforms.
  Of course, you can buy a new laptop: in case the motherboard would be defective because the motherboard is very expensive spare part, it would be the best choice in my opinion.

• Problems with the blue screen of death (when my computer is shut down)

  I get a blue screen of death on occasion, when shutting down my computer (Windows XP, Dell Vostro). It started happening after I installed the latest version of the Synology NAS software. This is the message: BCCode: 100000d 1 BCP1: BA3F1F20 BCP2: 00000002 BCP3: 00000008 BCP4: BA3F1F20 OSVer: 5_1_2600 SP: 3_0 product: 256_1. Additional technical information: C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\Mini021112-01.dmp and C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\sysdata.xml.

  Not sure if it is related to the installation or if it is another problem. Any advice would be appreciated.

  The minidump file showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referencing the usbccgp.sys (common class generic Parent Driver USB):

  BUCKET_ID: 0xD1_CODE_AV_BAD_IP_usbccgp+ 1f20

  The spoolsv.exe (print spooler service) is the process that crashed.

  You have recently installed a USB printer?

  In any case there may be a problem with the USB stack in Windows XP Service Pack 3 so I recommend you to install the following fix can correct a problem of 'timing' of USB that can be useful for the error you receive:

  http://support.Microsoft.com/kb/969238

  There is a link at the top of the article to request the hotfix.

  There was a driver of Synology (busenum.sys) loaded during the crash, but it does not appear to be involved in the accident.

• I have a problem with the computer is shut down.

  Original title: shut down the computer

  I pressed the stop many times but nothing appears. What is the solution to this problem?

  I pressed the stop many times but nothing appears. What is the solution to this problem?

  Windows 7 now allows you to change the behavior of the action of the right power button in the start menu. No record no hacks without control panel. Go to the taskbar and start menu properties. Select Start menu tab and you will find the option to change the power button function on. You can change the behavior of power down for

  • Change user
  • Close the session
  • Lock
  • Restart
  • Hibernate
  • Shutdown

  This is a good option if someone tries to stop power button and it locks the computer nicely.

• My Pavilion dv7-1264nr computer laptop shuts down suddenly just in use.

  I have a notebook Pavilion dv7-1264nr intertainment.

  P/N: NB240UA

  Windows 7 64 - bit OS I've been running smoothly for about five months until today.

  I consult emails and watch a vidio utube and he just lost power.

  When I turned it back on I was presented with windows is not stopped correctly and I chose to start in normal mode.

  It ran fine for another five minutes and did the same thing.

  I had a few problems cooling fan but have always used on a four cooling fan Matt who has kept more than heating.

  I have no viruses, checked for any material conflics and found nothing Device Manager.

  I did update the BIOS when I bought the laptop with no problems, so I don't think it's that.

  I'm prety savey when it comes to understand and find problems with my PC, but it left me speechless.

  Can someone please give me some advice and point me in a direction I thought to havn't.

  Thank you

  questfor

  The behavior looks like an overheating problem.

  By chance, have any of you tried to use canned air to blow out the vents with?

  The graphics card and processor are more deeply in the unit. While the events may appear not necessarily immediate sings, there might be dust accumulate more in is not normally visible. I would like to start with the video in this post. This is a universal desktop and portable video, but looks like he's starting to discuss the books around the 2 minute mark. It is possible I missed a portable reference earlier in the video, then it may be useful to view all.

  Let me know what happens.

• my lap top last 10 minutes and just shuts down what could be the problem

  my lap top powers on and works fine for about ten minutes is so stop just to what could be the problem

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Keep in mind
  This associated heat does not always mean too much heat as it is often a part or a component
  who is too sensitive to normal levels even heat.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ======================================================

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  ---------------

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What could cause my computer to shut down when choosing the option to sleep and then a few weeks later turns on at all?

  Yesterday, the computer was working, and I shut it down normally (because he will not sleep if I choose anyway). I unplugged everything, including the power cord. He had served during the night. When I plugged everything back up, now it will not turn on. When I plug in the power cord, the Green LED indicates will power (green light in the back near the plug), but when I push the power button on the front, green back light turns off, & the computer does not illuminate.  He acts as something of a power vacuum. I have been stressed for 3 weeks trying to figure why he would not sleep, it seems now he can sleep forever!  Help, please!  It is a HP Vista computer & about 4 years old. I have never had any problems with it so far. Any help is greatly appreciated!  Thank you.

  Hello
  It seems to be a hardware problem. I suggest you to contact the HP support team by visiting the following link. They will be able to help you the best.
  http://WWW8.HP.com/us/en/support-drivers.html
  Also:

  http://h30434.www3.HP.com/

  Hope the information is useful.

• Unable to start the Vista computer, constantly shutting down once again

  I have to keep hitting the power button to the screen only lights so that it turns off again, again and again and more... It makes me crazy... It's a repair job shop or something I am doing wrong with a bad implementation... Thanks for any help... Ed McKenna

  * original title - why my screen always goes, black about 3 or 4 seconds after start *.

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

• S2716DG buttons layout market/Menu does not, the Image block when the computer is shut down

  Hi all

  I had my monitor for about two weeks and it works fine, but yesterday the menu and power buttons unresponsive. The light on the power button is also disabled. If I turn off my PC the picture hangs at the screen closed until I have turn the computer on. Otherwise, the screen seems to work very well. I have not tried to unplug it and by him plugging back in since it's my only monitor at the moment and I won't be able to use my PC the case. Anyone know what could be causing this?

  Thank you

  Not sure, but you should try resetting the monitor =
  * Turn off the monitor
  * Unplug the monitor power cable and all other cables from the rear bottom side of the monitor
  * If a mechanical monitor power button / power off, press the button in 30 seconds (erases all residual power in the circuits). If not a mechanical, just power button wait 30 seconds
  * Reconnect all cables and retest

• My computer guard shut down by itself

  My computer for some reason some keeps stopping itself. Is not over heating or something like that and the power supply is good. I can completely start the computer, navigate or do anything else for about 20 minutes, but then something forces it to stop.

  I tried to do a restore system to factory settings, I ran scans of several viruses, Malware scans and spyware superanti Scan in Normal windows Mode and safe, and its not picking up anything. \

  Before I did a system restore I got one "he's dead jim" link from my browser chrome, and then my computer would be closed, but now its just stop with that. Can I stop sometimes when im running other programs, but it will just stopped again at another time.

  The computer is only about a year with Windows 7. Anyone have any ideas?

  Hello

  ·         You get an error message or code?

  I would say lets you check in the Event Viewer log and check for defective module that is causing the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  As you have already restored the computer to the factory settings, this problem could be related to the hardware store. I suggest to check in for all devices Device Manager and also check the RAM.

  I suggest you contact the manufacturer for the unwanted material.

• The drain of the battery even after the computer is shut down.

  I just bought a Sony Vaio and notice that the battery drains approximately 10% per day when the computer is turned off.  Any idea? It's a phone fault, I should return it for an Exchange.

  Hello t. Lee.

  This is a normal operation of the computer. You can check the link provided for the below detailed information: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C223674

  Note: If my post answered your question, please mark it as an "accepted Solution".