Computer laptop HP Pvilion smart Touch is failure to get the service for more than a month

Similar Questions

• My laptop is in the service of more than 1 month.

  Hello.

  My name is Mustafa, I am from Turkey. I have two Toshiba laptops and one of them with serial number 27127505H (Tecra A8-103) broke down one and a half months and I have sent to the service with its Bill. The period of a month elapsed time function and I have required the service to change the laptop with a new one. But I still have no answer. And I would like to inform this issue for the Toshiba Europe or around the world.

  Please help me.

  Hello

  Try to call again and ask them why they need so much time to get it repaired. Maybe they are still waiting for parts.

• Get Windows 7 is not genuine for more than 6 months on laptop

  I have Windows 7, I bought with an Advent Roma 3000 laptop from PC World over 2 years ago.  For more than 6 months now, I get a message that my Windows is not genuine and there is a message in bottom right of the screen "Windows 7 Build 7600, this copy of Windows is not genuine."  IT IS!  I've been to PC World, which just re-installed Windows 7 and said if it happens again I had to do it myself.  I've done 4 times and each time after about a week, it happens again. I bought it in good faith.  Obviously a MS update changes the status of Windows.  I've had enough, and if I can't sort I will soon buy a new machine, which will be an Apple because MS doesn't give a sh * t.  I tried to contact them, nothing works!

  You can also try the following:

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• My computer is not connected to the internet for more than 2 minutes both

  my computer is not connected to the internet more than 2 minutes at a time

  Hi Ronda,

  Thanks for choosing the Microsoft Community forums.

  I see that the computer is not connected to the internet for more than 2 minutes on Windows 7.

  To help you better, please answer this question.

  Did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1:

  
  Please see the knowledge base article:
  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211/

  Method 2:

  You can make sure to uncheck the following option in the network adapter properties in Device Manager.

  
  "Allow the computer to turn off this device to save power".
  You can see the steps
  a. Click Start, the Device Manager in the area start search, type and then click on Device Manager in the list programs.
  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  c. in the Device Manager dialog box, expand network adapter, click the network adapter and then click Properties.
  d. in the network adapter properties dialog box, click the power management tab. The allow the computer to turn off this device to save uncheck box appears

  Method 3: Problems of Wi - Fi network and

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• When I start my laptop Vista loaded, I get 'Please Wait' for more than 2 minutes sometimes. What does Vista behind my back?

  I have a Toshiba laptop with no extra or odd options, this is the case whenever I start and it's annoying when Vista was announced as being quick to start.  This small circular thing continues his tail for up to 4 minutes while the 'Please Wait' shines.  Very unsatisfactory.  I also bought the best virus/malware protection money can buy, at least that's what they say, it's a bit like microsoft.

  Check if the same problem occurs if you "clean boot" your system (check this page). This should load Windows Vista without third-party programs. If the startup time is better, then you will need to find or which program is causing the problem.
  However, you can check this page first.

• Computer laptop 13-4193nr x 360 spectrum: when I connect the printer for laptop HP spectrum x 360, Windows 10 treats like CD/DVD-ROM, no printer

  I recently bought a laptop convertible spectrum HP 13-4193nr x 360, under Windows 10 Home. When I connect our printer (HP LaserJet P1102w in black and white laser printer) port USB to the laptop, Windows can see the printer and he knows his name correct ("HP LaserJet Professional P1102w"), but does know that the device is a printer. If I go to the Panel and then devices and printers, the printer is displayed in the "Devices" line (with the laptop and the mouse) and not the line 'printers '. If I select the printer entry in the "Devices" line, Windows displays the name of the exact model of the printer, but for the "Category" field, it indicates "optical drive".

  How can I tell Windows that this device is a printer and not an optical drive?

  Hi @RHodnett,

  I'd be happy to help you install your Laserjet P1102. I understand your description that the computer does not recognize the printer as the printer and instead identifies it as an optical drive. Even if you don't see one of the errors mentioned in the following document, I think that the solutions presented may help you find a solution: Printers HP - "device installation failed" or "unknown device" message during Installation USB (Windows).

  Please let me know if that solves the problem, or if you need assistance. If the question is indeed solved, please click Accept as Solution button below. If you need additional assistance, please include any details you think could help me help you and I will do everything I can to help. Thank you.

• FT in case of failure due to the VM has more than one vCPU

  I am so excited to try FT 6 ESXi.

  However, when I activate the FT function, I get the error:

  'Entity VM_Name fault tolerance configuration has a problem: the virtual machine has more than one virtual CPU. "

  

  I set config to do anything?

  Please notify. Thank you!!

  I got the answer of the VMware consultant.

  IDE is not taken in charge for SMP - FT.

  Thank you!

• top of Tower HP touch smart: don't remember password on the laptop of hp smart touch can ' low load suggests no disc reset

  forgotten password on the laptop of hp smart touch don't down load suggests no disc reset

  Hello:
  
  Identify the name of the phone model, product number:
  http://support.HP.com/us-en/document/c00033108
  
  Is - this Windows login password or password BIOS Admin or power on or boot password?
  
  Concerning
  
  Visruth

• I want to connect to a computer laptop win 7 with a xp pc, but she keep asking for user and pass?

  I want to connect to a computer laptop win 7 with a xp pc, but she keep asking for user and pass?

  Hi Maysambagheri,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. how you try to connect with two computers?

  2. What is the error message that is accurate or complete?

  3. do not connect you to your Windows 7 laptop as administrator?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  For reference:

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to

  Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to download several times and in different places. That is wrong. Does´NT CS5 run on El Capitan? Or what else? Thank you.

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Hi guys, im facing the same problem, if my computer if it remains unused, it fails and I get the error: State failure driver.

  I'm using windows 7 64-bit proferssional, pls help.

  Hi Rayan,

  Thanks for posting your question in the Microsoft Community.

  Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.

  . Did you recent hardware or software changes to your computer before the show?

  I suggest you remove all external devices except the keyboard and mouse and check if it helps.

  I also suggest you follow the steps mentioned in the link which can help you in the matter of fixing:

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.

  You can also download the last dump file so that we are able to help you. C:\windows\Minidump

   

  You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.

   

  If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:

   

  a. click Start, point to settingsand then click on Panel.

  b. double-click on System.

  c. click on the Advanced tab and then click settings under start-up and recovery.

  d. in the Write debugging information list, click on image partial memory (64 KB).

   

  Send a copy of your dump file in a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information

  http://support.Microsoft.com/kb/254649

   

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Laptop is blocked at the installation of 10 out of 17 Updtes for more than three hours

  Laptop last night quit unexpectedly. This morning when I started the machine, it was locked to the installation of 10 of the 17 updates for more than three hours. I tried to turn off the machine, but I still get the same message. How do I get this at the end to restart properly

  Hello
   
   
  1. remember you number updates that have been installed?
   
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 2.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
   
  Method 3.
  I recommend you to restore system using a Windows 7 DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
   

  If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.

   

   

   
  I hope this helps.

  Kind regards
  Support Microsoft Savan-

• My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?

  My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• I have a laptop Windows 7, which says it's the upgrade. It puts in place upgrade now page for more than 5-6 hours.

  * Original title: upgrade Windows 10

  I have a laptop Windows 7, which says it's the upgrade.  I leave work on the upgrade to Windows 10 on 2 different days and no luck.  It puts in place upgrade now page for more than 5-6 hours.  Any help?

  Jeff

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• EventID: 1206 Event Source: Active Directory Web Services ADWS failed to determine whether the computer is a global catalog server. What will be the solution for this.

  EventID: 1206 Event Source: Active Directory Web Services ADWS failed to determine whether the computer is a global catalog server. What will be the solution for this.

  Hi K jtm,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/