Computer says it's 'stop' at all times.

Similar Questions

• plugin - container.exe sucks mass memory and makes my computer lag, how I stop it all to appear because he appeared only with the download of the latest firefox?

  I want to keep the plugin - container.exe to come...

  This has happened

  A few times a week

  == I downloaded the latest firefox

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish?

  My problem is? How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish? Example I have Microsoft Security Essentials set allow to run daily on 1200 AM and until he finishes my computer goes to screen saver Mode. and when I click on my mouse, I must sign completely new in my computer > how to stop this from happening, I want to keep my Security Scan open until there finishes?

  All the solutions for this?

  Original title: Windows Vista systems

  Hello

  This can help you:

  "Enable or disable the screen saver.

  http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

  And this is how do to change the time to wait before the screensaver comes on (article 8) and how to disable the password to logon to him (art. 9):

  http://www.Vistax64.com/tutorials/85539-screen-saver.html

  "How to disable or enable Protection by password on Wake Up in Vista"

  http://www.Vistax64.com/tutorials/102686-password-protection-wakeup.html

  See you soon.

• My computer keep saying windows has stopped working

  My computer keep saying windows has stopped working. What can I do to solve the problem?

  Hello

  1. for how long are you facing this problem?

  2. did you of recent changes made to your computer?

  3. what operating system you run on your computer?

  I suggest that you perform a clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• I'm not able to open all the documents, computer says that WIN32 ERRORS won't let me open.

  I'M NOT ABLE TO OPEN DOCUMENTS. COMPUTER SAYS WIN32 LET ME NOT OPEN.

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  Please quote the exact text of the error message. Do not paraphrase. Where are the documents? Please give the full path; that is C:\Users\your-username\Documents. What version of Vista are you running? The files are only one type of file; for example, Word documents? If Yes, which version of Word you?

  More details, you can answer on your system and the problem, the more focused, as you can get. MS - MVP - Elephant Boy computers - don't panic!

• HP Photosmart C5180 all-in-one: computer says magenta ink is empty, but it's not.

  The computer says that the magenta ink is empty, but it's not. Black printing is only possible. When I I use the HP Solution Center and do a test print, it prints all colors with no problems. I can´t find the program that made this error.

  Hi there @Tsuriman,

  Welcome to the forums!

  I read your post on your Photosmart C5180 showing you the magenta is empty, without. See the instructions below to try to fix the error message! If the problem persists, give us a call to see what your printer options are next with HP.

  Join our technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you want to send me a 'thanks' to meet your concerns today, click the thumb upward below!

  

  HP Photosmart C5100 all-in-One Printer Series - "Ink cartridges are empty" Error Message

• graphics driver intel my computer stopped working 6 times

  graphics driver intel my computer stopped working 6 times now it kept on views lose help please recovered what should I do?

  Hi Daniel,.

  Here's something you can do.

  1 visit the computer manufacturer and download the latest graphic drivers Intel.

  2 start the computer in safe mode as this will start with mode low resolution.

  Follow the steps in the link to start in safe mode.

  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode

  3 uninstall the graphics driver from Device Manager.

  a. click Start , and then type DEVMGMT. SMC in the startup search box and press ENTER.

  b. click the arrow before graphics cards, right-click on the Intel driver and then click Uninstall.

  c. you may be prompted to uninstall the driver software, please insert a check mark to have the pilot finished is removed from the system.

  You will be asked to restart the computer. Do not restart.

  4. go in to uninstall a program in the Control Panel and check if there is no Driver Intel in the list. If so, then select it and Uninstall the driver. (http://windows.microsoft.com/en-in/windows7/uninstall-or-change-a-program)

  Once done, restart the computer in safe mode, and then install the driver that you downloaded from the computer manufacturer website.

  Hope this information helps. If you have any questions, please let us know.

• the computer says that my players flash is obsolete, so I tried to update, download of starts by stops at 25% and will not continue.

  the computer says that my players flash is obsolete, so I tried to update.  Start the download by stops at 25% and will not continue.

  This morning, we solved a problem which prevented Flash Player facilities to end for some of our Macintosh users.

  If you have encountered this problem, please remove any previously downloaded program installation of Flash Player and either:

  (1.) download the installer from https://get.adobe.com/flashplayer

  2.) download the standalone installer from http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

• Computer hangs every 30 seconds in all programs

  My computer freezes every 30 seconds.  Sound stutters and hesitates the cursor.  Freeze only lasts for 1 second, but this is very embarrassing.  It happens in all programs and at all times.  I have tried several programs fix - it as advanced system of cleaning and difficulty cleaning without result.  I downloaded process Explorer and it shows my use of cpu amounting to a normal 7 to 20 percent when the stuttering occurs.
  I have a Dell Studio XPS 9000
  Intel Core i7-920 processor
  8 mb L3 cache clocked at 2.66 ghz
  8 GB SDRAM DDR3 at 1 066 mhz
  ATI Radeon HD 4350 w / 512 MB
  Windows 7 Home premium 64-bit

  This started about 2 months ago and drives me crazy.  Any help will be much appreciated.  I really don't want to go through the trouble of reinstalling windows 7.

  Original title: freeze momentary

  Hello

  Check with Support from Dell, their online documentation, drivers, diagnostics and ask questions in the forums on
  known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error 711 The Secure Socket Tunneling Protocol Service service on Local computer started and then stopped. ." Unable to connect to the Internet

  Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1

  Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I am so desperate and would appreciate helpful suggestions.

  Hello

  1. When was the last time it worked?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps is not enough, go to method 2.

  Method 2:

  Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic

  (a) (a) cliquer click on start-run, type services.msc, the, click OK.

  (b) ensure that the following services are started on and set to automatic.

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  See also:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• Is modem speedstream 4200, but my computer says that I don't have a modem

  got the Northern Telephone modem when I sign for Internet high speed, activy light flashes market but is mainly off

  the USB port does not work eather do not know if I need or how conect.

  computer says I have Windows XP addition at home but also the sayes I have IE Windows

  Other than the error message can connect to the Internet?

  You can be confused by sloppy terminology used to describe how the computers are connected to the Internet.

  At the time where most of the people connected to the Internet via a dial-up telephone line, the piece of equipment used for this was called a modem.

  "High speed Internet" means today generally an Internet connection using DSL (hotline), or "cable" (which uses the coaxial cable that also the door "cable") or a FiOS (which is like the cable but uses a line of optical fiber instead of the coaxial cable).

  Each of these technologies use a device generally called a "modem" which is connected between your computer and the line (phone line, DSL line, coaxial cable or optical fiber line) that enters your home.  Each of these modems is different; each is different from the original telephone modem; and none can be exchanged for all others.

  Your 'SpeedStream 4200' is a DSL modem.  In fact, to confuse you more, it's a combination modem and DSL router.

  Your error message may refer to the absence of a dial-up modem.

  • What do you do when the error occurs?
  • Please copy down the full text of the error message and hands, without paraphrase, in your next reply.
  • In most configurations using a DSL as the SpeedStream 4200 modem, it should be connected using an Ethernet - no USB cable.  Why do you think that "USB does not work?  Once again, please provide any error completely, without paraphrasing.

• How to stop spooler under app to come and say he has stops working what is spooler subsystem app

  How to stop spooler under app to come and say he has stops working what is spooler subsystem app

  Hello

  1. Since when are you facing this problem?

  2. have you made changes on the computer recently?

  3. when exactly you get the error?

  I would suggest trying the following methods and check if it helps.

  Method 1: Solve printer problems:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2: Clear the print spooler:

  To do this, follow these steps.

  a. click on Start Menu, in the online search, type services.msc and press enter.

  b. in the Services listed stop the service print spooler.

  (c) in Windows Explorer, navigate to the folder below and open the PRINTERS.

  C:\Windows\system32\spool\PRINTERS

  d. click on continue and Yes (if prompted by UAC) to approve the opening of the PRINTERS folder.

  e. remove all files in the PRINTERS folder, until it is empty, and then close Windows Explorer.

  Note: DO NOT DELETE the PRINTERS folder itself. Don't delete its content.

  f. open Servicesand start the service print spooler.

  I hope that helps!         .

• My computer says ACCESS DENIED when you try to put the values by defect of security + Itunes glitch thing? I need help?

  My computer is says ACCESS DENIED

  When I tried to do: http://support.microsoft.com/kb/313222/en-us

  This is the error I got! : (Sorry, really long).
  Monday, September 6, 2010 11:45:33
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-1141220282-763679081-1401190266-501.
  Configure S-1-5-32-555.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.

  Group membership configuration was completed successfully.

  -Configure the 64-bit registry keys...
  Configure users\.default.
  Configure machine\software.
  Configure machine\software\classes.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aa of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aax of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\ of construction. AMR.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.bwf of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.cel of construction.
  achine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied. (says this error ABOUT 1 000 times, I had to delete if it is not published on long!)
  Error setting security on machine\software\classes.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\classes\Wow6432Node.

  Configuration of registry keys was completed by one or more errors.

  -Configure the 32-bit registry keys...
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\wbem\mof.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.
  Configure c:\windows\syswow64\export.
  WARNING 2: The system cannot find the specified file.
  Error setting security on c:\windows\syswow64\export.
  Configure c:\windows\syswow64\ias.
  Configure c:\windows\syswow64\wbem.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\cachedlogonscount machine.
  Set up the nt\currentversion\winlogon\forceunlocklogon machine.
  Set up the nt\currentversion\winlogon\passwordexpirywarning machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\limitblankpassworduse.
  Configure machine\system\currentcontrolset\control\lsa\lmcompatibilitylevel.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminclientsec.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminserversec.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionpipes.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\disablepasswordchange.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\maximumpasswordage.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requiresignorseal.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requirestrongkey.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\sealsecurechannel.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\signsecurechannel.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  When I tried to solve this problem: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/9d71a399-d168-43ec-8083-673f5258d09c?ppud=4

  I can't back up my files anywhere that it says access denied :(
  

  Also, WHENEVER I open itunes windows must reconfigure and change all my default settings but my music is still there! It says itunes reconfiguration and it still load and say that is is to install itunes?

  I really need help please

  Hi mewlar101,

  You run the computer as an administrator?

  Step 1: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Now, check if you can back up your files

  Step 2: Check with another profile for the Admin user

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  On your problem of ITunes, you can post your query on the discussion group by Apple for more specialized help

  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After I downloaded beta Security Essentials, my computer say suddenly that he was not a genuine copy of Windows running and locked up.

  original title: the customer service is horrible

  After I downloaded beta Security Essentials, my computer say suddenly that he was not a genuine copy of Windows running and locked up.

  I called last night and got a foreign person has attempted to resolve the issues and could not, so he told me that I had to call back after 06:00 to speak to someone in the United States.
  So I called back today at 06:00 and got one of those who are running around things voice control that didn't fix my problem at all. After much effort, I got a live person. Again, it was a foreign person (why make me wait all night and get up early to call?!?!)
  This woman told me to restart. I told her that I had rebooted about 10 times since the day before and each time he took forever to load back up the box that tells me that I need to activate windows. She has reiterated, "I ask you to restart." I knew he wouldn't do ANYTHING, but I did and after the session it forever (as I told him it would be) she told me that I had to remind once I got up the box again. I called after that I got the box AND HAD TO START OVER again ONCE with someone new. Of course, she was trying to pass me to someone else.
  Of course, after all this trouble, no MS sells a product key for Vista, it is abandoned. So I need to go buy Windows 7 and she told me that I'll LOSE EVERYTHING when I install it - all my documents and family photos are gone forever. Why not take my money and sell me a product key instead of let me in trouble?
  The worst ever undertaken. Of course, MS doesn't care because they have a monopoly.

  You should not need to buy anything except the recovery disc for your machine (if the built-in recovery partition does not work), unless you really need Win 7 for some reason any.

  That being said - the COA sticker on your machine is readable? If Yes, then you should have no problem with a Windows 7 upgrade version - but you will need to either use activation by phone, or installation methods described here...

  http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media

• Battery indicator indicates 100% responsible at all times

  My battery indicator Pavilion dv4-2161nr in the lower right corner of the screen shows 100% charged at all times.  When I'm working on the energy of the battery only and I know that the battery indicator continue to show 100%.  After a few hours of work, computer laptop everything stops.  I am able to charge and run indicator on battery for a good time but never changes.  It also shows when the battery is running on current alternative with plugged adapter and the battery is in a State of charging a battery is full.  Any help would be appreciated.

  Hello

  First, shut down the laptop, unplug the power adapter, remove the battery and then hold the Power button for 30 seconds.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the laptop, unplug the AC adapter, reinsert the battery, then start the computer turned on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes and see if the battery level decreases as it should.

  Kind regards

  DP - K