Computer stops and exports files

Similar Questions

• Hi, I have a toshiba tecra 5000 I downloaded updates when they try the third phase of the update download the computer stops and restarts.

  I'm a newbie with this stuff so bear with me.  I updated charges, when they get to the third stage of the download the computer stops and restarts. I tried all types of restart, the system is unable to connect. now the hard drive light on the face of the computer won't lite, the laptop won't even consider itself restart any ideas

  Hello

  1. the updates you downloaded?

  2 a successful installation of updates?

   

  Follow these methods and check

   

  Method 1:  If you are still not able to start the desktop computer, you can rename pending.xml and check.
  Renaming or removing the pending.xml file booting from the Windows Vista disc.
  a. Insert the installation disc.
  b. restart your computer.
  c.Press any key to load the disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.
  d. choose your language settings, and then click Next.
  e. in the System Recovery Options menu, click command prompt
  f. at a command prompt, type the following command below and press ENTER
  CD C:\windows\winsxs

  g. now, type ren pending.xml pending.old , and then press ENTER.
  Restart the computer and check.
   
   
  Method 2:  Once you are able to boot to the desktop, follow this method.
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/949358
   
   
   
  Thank you

• Frequently, my computer stops and restarts all am surfing the net? What should I do?

  Frequently, my computer stops and restarts all am surfing the net.  What can I do?

  Hello

  1. what type of internet connection do you use? What is a wired or wireless?

  2. you receive messages or error codes?

  2. did you of recent changes on the system?

  Step 1:

  You can check the following items and check if the problem occurs in safe mode with network.

  Start your computer in safe mode

  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

• When I try to enter in bigfish games as it attempts to load it on my computer stop and I get the following: werfault.exe, unknown software exception 0 x 00000409 held @ location 0 x 76117715. How can I fix this kind bigfish will load?

  When he tries to access bigfish games installation stops and I get the above error code

  Hello

  Please use the Forums of Microsoft Windows 7.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Let us try to disable the Antivirus security software and check if the problem is resolved.

  Re-enable the security software after checking the issue.

  Alternatively, you can try to disable the firewall and see if the problem is resolved.

  Re-enable the firewall after checking the issue.

  Method 2:

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Recently installed Windows 7 now cannot open any games Big Fish when I try to open the game get error message computer stops and restarts

  Cannot open the computer game stops and restarts

  Check that the Big Fish Games support the site http://bigfishgames.custhelp.com/app/home to see if it's a known issue.  I hope they don't send you here :-)

• After upgrading RAM, computer stops and gives error when restarting: "DISK BOOT FAILURE, INSERT SYSTEM DISK".

  Original title : OFFICE XP STOPS (MESSAGE of ERROR)

  I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK". I just added more memory to my 512 RAM. I USED MY XP TO REBOOT DISC, BUT THERE ARE ALWAYS AFTER PRESSING THE KEY 'R '. ONCE IT STARTS AND SE PAST JUST STOPS AND THE ERROR MESSAGE IS POSTER AGAIN UPWARD. I HAVE THE SAME 'MSCONFIGED' IT NORMAL TO SELECTIVE. I WAS ABLE TO GET INTO SAFE MODE, BUT NOW IT WON'T. I GET JUST THE ERROR MESSAGE.       > WHAT AM I DOING WRONG

  Hello

  You can view these methods:

  Method 1: As a first step, check to see if the hard disk becomes detected or listed in the Basic Input/Output system (BIOS). Also, be sure to change the boot order in the CMOS settings so that thehard drive is the first on the list.

  Note: To learn how, see the documentation provided with your computer or contact the manufacturer of your computer.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Method 2: If the manufacturer has installed the Recovery Console on your computer, perform the check disk to fix this.

  At the recovery console command line, type:

  Chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information, see:

  How to perform disk error checking in Windows XP

  Chkdsk

• Sort of proportions and export (file name)

  When I crop my photos, I sometimes find a few photos work best in 4 x 5/8 x 10 and other culture in a stretch of 2 x 3/4 x 6.

  Question No. 1) How to sort and find all of my images with a specific image format?

  When in the library and setting up a module filter (ctrl + f), I see no way to filter and sort my proportions. In the "Metadata - Label" filter fields, there is an "Aspect Ratio" value however the only options are Portrait and landscape. (more of a layout page/photos as "aspect ratio" for me)

  * Feature Request: Please add "Aspect Ratio" options (as presented by 'r' is used to resize) in the library filter metadata. **

  Question #2) how can I include the proportions of the image (for example 4 x 5) in the name of the exported file?

  I see no way to do either, so I have to manually find all images with the same proportions of first, then set a custom name for the export field and export each ratio at the same time.

  * Feature Request: Please add "Aspect Ratio" options in the file naming of fields available for selection when you export images.  Values such as "4 x 5" and "4 x 6"would be very happy to be able to include in the name of the file of my images.

  Kind regards

  Brian

  Thanks John!  I found and posted here:

  http://feedback.Photoshop.com/photoshop_family/topics/sorting_by_aspect_ratio

  _export http://feedback.Photoshop.com/photoshop_family/topics/need_aspect_ratio_field_for_filename

• Cannot import and export files to the Interface of the IOM

  Hello world
  
  I had a problem at the IOM import deployment interface Manager file and export a Deployment Manager
  
  When I import and browse to the XML file, the import interface there is nothing displayed.
  
  At the level of the console I can find: < Target size = '0' > < / Target >
  
  When exporting, it shows the error at the end and no file created.
  
  Someone at - it had the same problem?
  
  P.S. to my work environment there is no problem, only to according to the customer!
  
  Thank you.
  
  David

  Check the JRE installed in your browser...

  Thank you

• When you start to print on the hp 6100 the computer stops and a blue error screen

  Starts to print on the hp 6100 the computer when to stop an a blue error screen appears, and the computer must be restarted? Help this is driving me nuts.

  Hi William,.

  Do you receive an error message or error code?

  Blue screen can be caused by hardware and software issues.

  Try the following and see if it helps.

  
  Method 1:

  Try to uninstall and reinstall the printer drivers and check if it helps.

  Uninstall a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Install a printer: http://windows.microsoft.com/en-in/windows7/install-a-printer

  Download HP drivers and software - specify product name

  
  Method 2:

  Refer to the steps in the following Microsoft article and check.

  Resolve stop (blue screen) errors in Windows 7:http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Notes:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

  
  Note: I suggest you to provide us with the Mini Dump files to get a better understanding of the issue.

  Follow the steps to copy the contents of the minidump files:

  (a) copy the contents of \Windows\Minidump to another (temporary) location or anywhere on your machine.

  (b) zip copy.

  (c) attach ZIP archive to your message by using the button (attachments) "trombone".

  (d) please upload them to a service like Skydrive file sharing.

  You can view the following link to find out how to send the files minidump using Skydrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Keep us informed on the status of the issue.

• My audio stutters constantly during playback of dvd, but not on the timeline. With the help of computer GOV and exporting to Quicktime. Need help

  Can someone help me? My unit set up a video memorial to a deceased soldier. The audio and video play fine on the timeline, but when the rendered and serious on a DVD-audio stutters constantly. My soldier exports to QuickTime using a GOV'T computer.

  You need to export from Premiere Pro using predefine the MPEG2-DVD and import the TWO files (audio and video) in yet for the creation of

  When you export the body using any other codec, you have created a layer of compression... and since then still must re - encode the video to make it legal for a DVD, you just create a 2nd layer of compression

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn

• Computer, stop and press back through web pages.

  My computer turns off without warning and goes straight to a white screen and the "no signal"message." At the beginning it was all playing games online (basic Bigfish Facebook stuff), but now it stopped just after turn on.
  If I use internet explorer, it will sometimes tap back to the previous web page as if I am hit the arrow to the left. On a bad day, he'll quickly scan through all the web pages I've visited, sometimes most recent return to the web page.
  I've defragmented, disk cleanuped, restored to a previous point of store where it worked fine, perform analyses for viruses and malware and nothing software did appear as a problem... but always the computer is shut down and flicking through web pages.

  You have the hardware failure. It could be something as simple as the video card or something more serious such as the motherboard. There is no way for me to tell what you have written. You can solve yourself or take the machine to a competent local professional. Do not use a type of BigComputerStore/GeekSquad or place.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Mc.play () mc.stop () and swf file loaded AS2 works do not?

  Hello

  I am trying to load the swf file in another field using MovieClipLoader AS2 and then try to play and stop the parent SWF swf file load but it does not work on the field. It is working perfectly fine in pc local url i.e. file:///C:/Users/Sunil/Desktop/test/index.html (work as expected)

  But same time I put my setup all embed in html page then it doesn't work. Please see the newsletter link below.

  http://divinestreaming.com/projects/test/ - does not

  file:///C:/users/Sunil/desktop/test/index.html  (Work as expected)

  Rest all the AS2 MovieClip properties work as expected but play() and stop() does not.

  If I put the swf file in the same domain, then it works as expected but even time when I try to load the SWF to another area of my field so he doesn't.

  Please tell us how to solve this problem.

  Best regards

  Sunil

  you have errors in your tracing instructions, but who must be artifacts of forum or your code would not work locally.

  in any case, you should probably a Security.allowDomain () statement in your loaded swf file.

• Computer stops and starts when you try to play a video?

  I screwed up something some time ago... don't know what... when listening to news or videos talk starts, stops, starts again... drives me crazy and don't know what I did or hit to spoil the sound... the someone can help?  Well be very grateful!

  Hello MinDebbie,

  What you are experiencing is "buffering." This is due to the fact that the internet connection is slow. More people who have access to the the slower video link, it will be unless you have a very high speed. Also many ISPS (Internet Service Providers) cap their bandwidth to peak during the day. This, then, slows down the connection more far. It is not a Windows problem but an ISP.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Computer stops and restarts continually when not in service.

  Even when I stopped it for the night, it will restart automatically back up? !!

  Hello

  Check your settings (BIOS/CMOS) - usually F2 as you start so watch the display - Wake
  On Lan, Wake on Modem and so on.

  -----------------------------------------------------------

  If you catch it the next time he awakens in issue this command:

  Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN

  at the prompt, type in or copy and paste it

  powercfg - lastwake
  Press enter
  (space between g and -)

  -----------------------------------------------------------

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Does anyone know why when I run Defender and he finds a Trojan horse, and I try to remove it, it begins to make then after some time the computer stops

  original title: Defender

  Does anyone know why when I run the defender and he finds a Trojan horse, and I try to remove it it starts to do then after some time the computer stops and when I restart it Defender always tells me there is a Trojan horse and the same thing happens when I try to remove it?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.