resolution of the screen using hdmi cables

Similar Questions

• Resolution of the screen using 640 ProBook and HP Z27i

  Can the maximum screen resolution (2560 x 1440) be acheved when using the HP Z27i as an external monitor with the ProBook 640 (Intel HD Graphics 4600)?

  Please find the information you want as shown below:

  VGA resolution = port supports up to 1920 x 1080 resolution external @75 Hz

  DisplayPort 1.2

  Supports resolutions up to 2560 x 1600, depth of 30 bit to 60 Hz and full HD (1920 x 1080) color monitors.

  24 - bit 120 Hz color depth

  DVI - D (single link)
  Video available via the DVI port optionally HP Docking Station (sold separately) supports resolutions

  up to 1600 x 1200 at both full and cutting reduced and 1920 x 1200 at cutting reduced

  Hope this helps, for other queries in response to the post and feel free to join us again

  "I work for Hewlett-Packard.

  Click on thePurple Thumbs Up icon in the lower right corner of a post"thank you *.

  Please check accept as Solution if it solves your problem *.

  Kind regards

  K N R K

• I have Ps CS6 running on a MAC Pro partitioned and using Windows 8.1. It was mainly for the resolution of the screen. However, as the Ps work the tiles on my screen and the icons at the top and to the bottom of the face are so small I don't see the correc

  I have Ps CS6 running on a MAC Pro partitioned and using Windows 8.1. It was mainly for the resolution of the screen.

  However, as the Ps work the tiles on my screen and the icons at the top and to the bottom of the face are so small I don't see the correctly.

  Can I enlarge these and the layers on the right to a box size readable?

  My UI elements appear tiny. | Error postal codes of Mylenium

  Mylenium

• Unable to set the resolution of the screen for an external monitor

  I'm trying to set up an external monitor to Asus to mirror my iMac 27 "new using a HDMI > Lightening connection, but using the monitor preferences, requires both screens at the same resolution. The Asus monitor is smaller, I'm looking for mirror to a proper resolution to the screen (that I can actually read!). From what I gleaned on the web until now, so it should be easy - and now I think it has to do with the HDMI connection on the monitor. Any advice would be much appreciated!

  Tom Kloster

  Portland, Oregon

  You will need to disable mirroring.

• connection of two monitor using hdmi cables

  hp Hello Forum

  I want to connect two monitors using two hdmi cables, hdmi to dvi cable and an external graphics card.  The problem is, I don't know where to start? (what to connect to what?) I can do if I have easy to follow instructions or illustrations would be gr8, thanks in advance :-)

  Sorry... I just noticed that we have discussed your configuration before. May I ask if the previously suggested configuration did not work? What prompted the purchase of the USB graphic card?

  Display USB adapters are designed mainly for the non-graphiquement intense... Adding screens for things like spreadsheets, documents word, daytrading, presentations, etc. The display adapter using USB can cause a lower performance than using the native chart AMD Radeon HD 7570 card. I suggest that you avoid using the USB graphic card, if possible. Depending on your selection of available cables, if suggests using one of the following configurations;

  (1) computer > HDMI cable > monitor and the computer > cable DVI > monitor (recommended)

  or

  (2) computer > HDMI cable > monitor and the computer > DVI-HDMI cable > monitor

• Resolution of the screen on the Treo 700 p and 700wx

  Can someone confirm the resolution of the screen on the Treo 700wx? I know that the resolution on the 700 p is 320 x 320. I want to the700wx so that I can sync via USB cable with my laptop 64 bit Vista operating system, but I've heard say that the 700wx resolution only 240 x 240. I don't know that I want to give up that much resolution. Some vendors who sell these phones used or reconditioned also show the resolution for the 700wx 320 x 320. Any comments?

  Hello.

  The 700 p screen resolution is 320 x 320
  and the 700w/wx is 240 x 240.
  If the seller says 320 x 320 on the 700wx I would double check that and make sure that your not getting something different.

  Message relates to: Centro (Sprint)

• Better resolution of the screen on Portege S100

  Hello
  I have a Portege s100. Is it possible to change the resolution? I don't mind having fewer colors, but I would like a higher resolution...

  Andres

  Hello

  I put t know that your device uses the resolution, but generally you can change the resolution of the screen in the properties of the graphics.
  As far as I know the possible screen resolution max is 1024x768px

• 13 spectrum HP 3004TU: Sound comes only not on the TV through HDMI cable

  Same problem like some users: using Win10 and despite the video past to the TV via HDMI cable I can't get the sound in the PC, and not in the TV. Drilling...

  He said that it is not plugged

  @porrinho

  Try to run this.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72370.exe

  REO

• Resolution of the screen too big to change it back.

  I changed the resolution of the screen via the control panel - display - settings - advanced - general.  The police is now huge; This is why, when I try to restore, I can't at this place or on the screen longer.  (It is a computer of mercury used as an augmentative device for a person with autism, the touch screen works as well as the mouse).  Any help would be appreciated.  Thank you.

  Follow it even if you cannot select anything on the screen:

  Click Start--> type of race: "desk.cpl" (without the quotes). This will open the display properties do the following:

  1 press once shift and TAB.

  2. press the right arrow to 4 times (that make you to the settings tab)

  3. press ALT + v (key Alt and press S on your keyboard)

  4. press the keypad and press ENTER.

  Here you will get the screen changed resolution Yes click on it and then later, you can modify as you wish.

  I hope this helps.

• I can't increase the resolution of the screen - no other available options? After installation of Office 97

  I downloaded Microsoft Office 97 on my computer (Windows XP) when I restared the computer and the desktop icons are gone also huge windows and also the color is distorted. There was also an alert saying that there is an error or a few sorts with the resolution of the screen. I tried to increase the screen resolution in the display settings, but there is only 1 option 640 x 480. How can I fix it?

  Hello

  I suggest trying to update the latest drivers for the graphics card and check if it helps:

  http://support.Microsoft.com/kb/283658

  It will be useful.

• I want to block the resolution of the screen

  My son is always change the resolution of the screen. I'll put the 800 * 600 screen resolution which is good for my eyes. I want to block the resolution 600 X 800 with a password. Is there a method to achieve this? kindly help me.

  Create a separate user for your son to use when it connects to your computer.  Make sure the user a user 'restricted' or 'limited '.  I don't think that limited users can change the screen resolution.  Also, of course, you will need to put a password on your account so that it cannot open a session as long as you and make the change.  If your son is pretty computer savy, you can also password for the built-in Administrator account.

  HTH,
  JW

• Resolution of the screen is always set to low at the start since April 12, 2011 WUs

  Since April 12, 2011 Windows updated my Windows XP Professional screen Resoultion is still set to low at startup.

  Only on the PC, I met a problem on the updates of Windows above.

  Any ideas out there?  Another issue similare on the same PC for the same time, it's that my IE 8 is not upward with the stored homepage (my Yahoo - I keep having to register for Yahoo every time).

  Hi crisbar45,

  1. are you able to change the resolution of the screen after starting?

  2. you receive an error message?

  3. which internet Web site explore view when you open it?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails then I would suggest that you manually download and install the updated drivers for the graphics card on the computer by visiting the card manufacturer or computer manufacturer's Web site check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• improve the resolution of the screen

  directions to improve the resolution of the screen

  On Friday, February 11, 2011 02:56:29 + 0000, davidhk129 wrote:

  directions to improve the resolution of the screen

  Resolution:
  Right-click on a free space of the desktop > personalize > Display Setings > move the slider to set the resolution. Check your user manual, see if she tells you what resolution is for your computer.

  * Here is a table of the guide line:

  http://public.Blu.livefilestore.com/y1pvGUOpkUY67cxTZ1EFZWpkqcBkvzdwEf5K1egxpvTq6OGRE10tXqSKn1Sugmk3EZFz3lhdFYEX8tIFvpGGVAoPA/screen%20size%20vs%20resolution.PNG?PSID=1>

  Do not forget that this table talking about native resolutions. Native
  the resolutions are resolutions which must be used If
  the monitor is a LCD one.
  But for those who have an old CRT monitor, this table is empty.
  You must use any resolution you prefer.

  And another point: the table could be correct for native resolutions
  for most of the monitors LCD, but not necessarily all. It is always wise to
  see the documentation of the LCD monitor to see what it says.

  Ken Blake (MS-MVP)

• resolution of the screen corresponding to the requirements of the webcam

  I use an operating system PC touchscreen HP - model IQS510uk - 64 bit

  When I use Skype I repeatedly receive a message saying that the screen resolution is not high enough for my webcam

  My screen resolution is 1680 by 1050 of the 32 bit more colors

  Is the screen resolution something different

  People with whom I talk on Skype say that my picture is fine.

  I reaally have a problem and if so how to deal with it?

  No, the resolution of the screen is your 1680 x 1050, that should certainly be excellent and high enough for Skype. Make sure that you have the latest Skype installed and if that doesn't help, here is a link to the support of Skype (it looks like there is not nothing wrong with your computer):

  https://support.Skype.com/

  MS - MVP - Elephant Boy computers - don't panic!

• Recommendations for the resolution of the screen on the W510

  Hi people,

  Recommendations on the resolution of the screen on the W510 - HD or HD +?

  And why?

  TIA,

  SD

  It really depends on your use.  I went with the HD + (1600 x 900), because the graphics card is powerful enough run games of high quality on this resolution and it provides decent realestate to make programming and another office on productivity.  I tried a HD (1280 x 800) screen at work and it is very small and useless for real work, but if you are hard to see or don't use it to calculate the light, he would serve well.  The FHD (1900 x 1080) display provides a lot of realestate, if you can read the tiny text and do a lot of business development type and graphic design works, more multitouch features that can be intreguing there, but I think the screen is a little too big to play video games.  That's my thought.