conditional action passed to standard action - why?

Similar Questions

• CP9 why/how to convert all my conditional actions standard actions?

  I have a CP8 project I've been working for a few months now and finally upgraded to CP9. I realized immediately that one of my intelligent form buttons using rollover States had not the rollover State postponed from 8 to 9, so I saved a copy of the file in CP9 for I can have both versions open by-side if I could go back in the file CP8 to see how configure the States of turning so I could rebuild them at 9. This really isn't a big deal, but I find that each of my Advanced actions have been converted to a standard action.

  This is a preview of action in CP8:

  

  And it is so, it now appears in the CP9

  

  Everything else in the file, except buttons of smart shape with bearing States, is intact, as I can tell. What I am confused by, that's why/how each conditional action has been converted into a standard action. What I can see, everything inside the IF and ELSE statements have been purged and all under the Actions across all decisions have been combined together, as well as any action that refers to a variable being disconnected from the variable.

  Fortunately, I did a lot of work on the file so I can re - open and re-save the file CP8 again, but it's just a weird super bug.

  This is a bug known, already mentioned in this forum, just after the liberation. A patch is promised as soon as POSSIBLE to fix.

  Solution: do a little editing of the conditional action, so that you can use the update action button. When the backup actions are conditional. BTW, they are not converted to an advanced action level but to a shared standard action.

• Captivate 9 just all my conditional actions converted to standard actions

  This isn't a problem converting 8 Captivate. I spent several hours this morning, creating conditional actions and by assigning them to the learning map that I create in Captivate 9. I save the file several times along the way and also at the end.

  Then, I went to lunch and attended a meeting. When I got home and has reopened the case in order to duplicate and modify the existing conditional actions, I found that they were converted to standard actions, and my settings of variables and expressions had been dropped.

  I have not a screenshot of what it is supposed to look like - these are actions "and then" which were associated with the first condition. The second condition and all the "else" statements have been abandoned.

  I had to have this ready to present to my boss before the end of the day--and I would have, if I didn't all start again. And how do you know if that this never happens again?  ARGH!

  SOMEONE HAS THAT HAPPEN, AND IS THERE A SOLUTION?

  

  No, they have not installed the patch for 9.0.1.320 nor the 9.0.0.230 fix. You are always on the first version that had this bug, resolved by a hotfix released shortly after the first version. This patch is now included in the patch you need to install as soon as POSSIBLE.

• My conditional Actions become advanced actions?

  This happened to me like 5 times... I always use variables to create checkpoints on the subjects or the buttons, so when my student visit them all Cp invites with a Windows with something like: congratulations, you've seen then all now to the next slide, blah blah...

  BUT: The conditional actions often turn into advanced actions and some actions that I had programmed, make me start all lose... (I have backups, but very annoying sound copy slides, which causes problems of its own related actions).

  Anyone know why this happens? I understand that this only happens when I continue to make changes in my project, but I always try to leave the variables and objects involved in the action intact.

  Just sharing and looking for some toughts

  I assume you are using Captivate 9? The issue you have now detected immediately after the liberation, and there is hotfix that you have to install to prevent the conversion of advanced conditional actions in standard common action. Take a look on:

  Hot fix | Adobe Captivate questions 9

• Problem of numerical comparison conditional Action

  I read the long blog of Rod Ward on conditional actions in Captivate, which seems to tell me if I have a user with a numeric variable and I'm comparing it with a literal value of-1 to see if they are equal, it should work fine because, as Rod, says "what is happening under the hood is that strings are first converted to digital before be assessed values.  However, it clearly doesn't.  That's what I have for the IF condition: VariableName is equal to-1.  The value of the variable declared in the Console (via a call to cpAPIInterface.getVariableValue ()) is - 1.  And yet the conditional action performs the ELSE action instead of the action of the YEW, as if he thinks that the variable, the value is - 1 is NOT equal to-1.  Captivate is certainly not lame that it can't handle the sign less on the - 1!  Anyone has an idea why it wouldn't work?

  I was waiting a bit to see if any of the other advanced/prolific contributors would be consistent with an opinion opposite to one Lilybiri expressed, but no one has.  I appreciate the offer of Lilybiri for help .  For awhile, I thought his assertion that Captivate couldn't handle

  If varname is equal to-1

  correctly.  I created a test case very simple to try to confirm, one who had nothing else going on at all to blur the.  I was surprised when it worked very well comparing a variable with-1.  Then I noticed other places in our advancement of existing shares that already rely on it working properly, and they worked as expected.  So I was banging my head against it to try to understand the real reason for a few hours it did not work and then I discovered there are TWO assets, click boxes on this slide, which enabled the AA I had been struggling with and another who had not changed but should be doing the same action as the ELSE the other action.  So basically, I discovered it wasn't a problem with the check against-1, such that it was originally, but execution of the evil AA.

  In addition, if Rod blog comment is correct ("what's happening under the hood is that strings are first converted into digital values before being evaluated"), it SHOULD work perfectly to compare negative numbers.  And it looks good now.

• What are the variables system will report to the LMS for the completion of the course, when there is a test (developed with conditional actions manually).

  I developed a course where the learner must pass the test to complete the course in LMS.

  I developed a quiz (quiz developed using conditional actions) manual.

  Now I want my course should show in LMS completion status, only after the learner either in quiz.

  How do my report course to the LMS of completion criteria?

  I use 6 Captivate and LMS is CSOD.

  I tried to include in quiz option is not working for me... anyone have any ideas to fix this?

  Thanks in advance

  Have you checked that Panel Advanced Interaction, please? All of the marked objects that are indicated to be added to the total of the Quiz are part of all system Quizzing variables. Insert a slide to score in your project and check the result when previewing in the browser or after publication.

• Creating conditional actions based on the results of the quiz

  I have a quiz at the end of my captivate file and I try to get to show different based on images if you have passed the quiz, or if you failed. For example if you pass, I want to show an image of the tick, and if you do not have an image of the cross, on the results slide.

  I tried to create this by implementing a conditional action. I put the two images on the slide and they hid. Then I have a conditional action value:

  IF
  cpQuizInfoPointsscored greater than or equal to 70

  ACTION

  See the Image_tick

  ON THE OTHER

  See the Image_cross

  When I play the quiz or image shows that I have success or failure (the quiz is set to a 70% pass - there are 10 questions, and all are worth 10 points)
  I am new to Captivate so that any help would be appreciated!
  Thank you

  Each action must be triggered by 'something', which is an event. You must attach to an event, I suspect that the event on enter score slide is one that suits. Select the slide of score, look in the properties panel, tab Actions, perform actions on enter, choose the action.

  In addition, there is a difference between the system variable cpQuizInfoPointsscored and cpInfoPercentage. Personally, I would use the simpler cpQuizInfoPassFail:

  IF cpQuizInfoPassFail is equal to 1

  See the tick

  On the other

  See the cross

  Download the tables in these two articles:

  System variables in Captivate 8/9 - Captivate blog

  Events / Actions (Advanced) - Captivate blog

• Captivate 9 corrupt conditional Actions

  One of my co-workers recently updated to Captivate 9. When it opens files created in Captivate 7 and 8, they view, edit, and preview well. But once she saves them (convert to Captivate 9) all conditional actions get deleted. They are from the Cp7 or Cp8 conditional actions convert all in stock Standard. (If) conditions and the other information are lost, and all sub scripts get pushed in a standard action column. All variable assignments are also hidden.

  If someone else hit this problem and if so, is there a solution? I have over 200 different courses spanning four languages. I can't afford to have 9 Cp corrupt all the.

  It is everywhere in this forum, you must have missed it. A fix is available,

  You can google for the hotfix in Captivate 9?

• [Captivate 6] Indicator completion using conditional actions

  Hello

  I'm looking to implement an indicator of achievement in the form of an image is displayed next to the link to a specific section to show that it is has been visited, to achieve this, I did the following

  1. [Page 1] 3 (smart form configured to use like button) buttons, 3 images (located in invisible on output) Image1, Image 2 and 3
  2. Link 1 [page 2] back button on slide 1
  3. [Page 3] 1 button link to slide 1
  4. [Page 4] 1 button link to slide 1

  Variables:

  • Sec1Done, value 0
  • Sec2Done, value 0
  • Sec3Done, value 0

  Conditional actions:

  • IF [Sec1Done] is equal to 1 THEN show Image1
  • IF [Sec2Done] is equal to 1 THEN show Image2
  • IF [Sec3Done] is equal to 1 THEN show Image3

  Action (as input):

  • [Slide] Assign the Sec1Done with 1
  • [Slide] Assign the Sec2Done with 1
  • [Slide] Assign the Sec3Done with 1

  Now, when I click on the link in section 1 (slide 1) then click the button back (slide 2) the Image1 does not appear, then is the same for slides 3 and 4.

  I've included a link to the project (hosted on mettle) if all goes well to make it more clear

  https://app.box.com/s/rnrhzrnm119f12nw85i74n1lhpn39bz0

  Thanks in advance for your support

  A little difficult, have several posts on similar configurations, but do not understand your explanation. You don't specify what events trigger actions at all. Why not use the Back buttons to change the value of variables? And the event that triggers the conditional action? I suspect that this is the event to enter the slide Menu?

  I suspect that you want something like that, watch the movie:

  Captivate 8 - first adventures - Captivate blog

• Advanced conditional action does not work when I add the second condition

  I use CP 8. I can't understand why I'm running on this problem. I have a series of If-Then conditional actions, but I am running into problems. I narrowed down it to this problem.

  It is a simple check box that must show either the box or not.

  

  As long as I have only one condition, it works fine. As soon as I add the second condition, it stops working.

  

  Any suggestions? I appreciate the help!

  Rick and I tried to explain that a conditional action is always executed completely. This is the reason that the second decision has been reset what had been done in the first in your first question. I have a lot of articles on my blog where I point out that bad sequence in the decision (or) is causing most of the problems with conditional advanced (shared) actions.

• How can I get the action to hide the table of contents to work as part of a conditional Action?

  GOAL: when a user takes the Quiz and fails, I wish they were able to get back underway and reviewing the materials before taking the quiz. As noted in other discussions, I have created actions advanced conditional and standard to achieve this:

  • Quiz results Slide Property executes the standard action "ResultsSlideVisitedAction", affecting a variable (AssessmentVisited) to 1, an indicator that the result slide has been visited.

  

  • If a user clicks the Retake Quiz button, instead of going to a "knowledge management", a quiz question classified early in the race with zero points, it goes to the first real quiz question. The slide to check knowledge runs the 'ExcludeKCAction', a conditional, looking to see if the result slide has been visited, which means that the quiz taken. If so, he jumps at the 1st question of the quiz slide.

  

  • I changed my Quiz message fail to tell the user to click the button Retake (which works fine) or navigate using the table of contents to review topics and then resume the quiz. The problem with this is that if a user uses the table of contents and gets to go to the slide to verify the knowledge to conditional action, they are sent directly to the Quiz.
  • So, I took a different tact and decided to ask the user to use a "Back in the race" button to review the course and then resume the quiz. Because you cannot add buttons to the slide of results, I created an invisible button to reset the AssessmentVisited variable to 0, so when the GET to the verification of knowledge, they are not sent for the quiz. I did this by adding the image on a button, and then by superimposing an invisible rectangular shape on top of the button image. This allowed me to add advanced invisible form actions. It worked!
  • The last thing I want to do is to hide the table of contents, so there is no chance of the user to return without resetting the variable. I tried to add the action to hide the table of contents, but it doesn't seem to work. Is this possible?  I tried to move the TOC to hide as actions of 1st, 2nd and 3rd and sill does not. Here is a screenshot of the conditional action that runs when a user clicks on my return to the button a course:
  • 

  I appreciate any thoughts on a solution to hide the table of contents as well. Thank you.

  Hide the TOC works only for OCD in overlay, you use a table of contents separate?

  With respect to the Score slide buttons, you make it very complex, it is possible since version 6: buttons on Question/Score 6 Captivate Slides?-Captivate blog

• Hide or display based on time or conditional action button

  Hello

  I wanted to see if anyone might have some insight on the best approach. In my Captivate program (version 7), I have a next button on each screen. Using Javascript and .NET, the variables are passed in the program.

  There are two scenarios when a user opens a session in the program I want to accomplish.

  (1) If you are a new user or if you have not seen a particular screen again, hide the btn 'Next' until the slide duration reaches a specific time (for example 60 seconds on a slide that's 63 seconds of time, given that the next button will stop the slide to move to the next slide) is over.

  (2) If you are a user existing, or that you have already seen a screen, display the next btn.

  I fight with the best approach. Any help would be appreciated!

  Thanks for your help!

  Ruth

  You cannot move a button on the timeline on the duration. I would therefore suggest to have two following buttons:

  Bt_Next1 for new users, with his script at the end of the slide

  Bt_Next2 for existing user.

  If you have access to the value of the variable v_lastmod an advanced conditional action on enter the slide might do the trick:

  IF v_lastmod is equal to or greater than 1

  See the Bt_Next2

  ON THE OTHER

  See the Bt_Next1

• Several conditional Actions required to Slide "on entry.

  I have a Captivate 7 file with a main Menu that contains 5 buttons that take users through 5 submenus. There are buttons that launch other project files on each submenu.

  On the submenus when a user performs a project file, the file closes and a variable puts a check mark on the top of the key to display this project is completed. Once a user makes all projects on a submenu, the button in the main Menu which directs user to the submenu then will have a tick on the top of the key to show the submenu is complete.

  This works well with many variables; standard actions on the buttons and a conditional action advanced on the "on entrance" for the slide.

  Question I have is that on each slide to make a Visual indicator that indicates the total percentage of full user (6 built images showing 0,20,40,60,80 & amp; 100). I created a conditional action that shows a relevant picture but my question is how to integrate only next to entry. Have you thought to use on output to show the image correctly on each slide, so that when the user visits a slide good picture - unfortunately it does not work.  Someone at - it ideas? Is it possible to drag on entry perform two separate conditional actions?

  Any great fully received help!

  You can put decisions as much as you want in a conditional to the progress of the actions. How much time do you have for now? All the statements in any fast action are always evaluated, which is not always the case in conditions in a programming language. Sequence is of course very important, both in the statements and decisions.

  Lilybiri

• Setting a conditional Action for pre-test questions: skip content slides

  OK boys and girls, let's see if this is even possible in a course of SCO, or if this solution multi-SCO (which means I'm toast, because we do not have the multi-SCO aggregator)?

  I want to implement a prescriptive pre-test. In my ideal world, the answers to each individual question would either enable or disable the content related to the question slides. If the user passes the pre-test, they might opt to skip the prescriptive stuff and complete the course. If the user fails the pre-test, they should consult the active content.

  Is it still possible in a unique world of SCO?

  Justenuf

  Will try to explain how I would try to handle this use case, but I didn't try it!

  • For the first condition, you already have a system variable which can be used in conditional actions to check if the user has passed the pre-test. If you use ordinary question slides, cpQuizInfoPassFail will be set to 1 if it is adopted, the value 0 as var is full only after the last slide in the question. If you use slides before the test, you will need to create a variable user, which you can fill with a tip action, based on the value of cpQuizIntoPretestPointsscored or cpQuizInfoPretestScorePercentage.
  • To follow the questions they did correctly, you must create a variable user for each slide of the issue, default = 0. Based on the system variable cpQuizInfoLastSlidePointScored, which is completed after each slide of the question, you can switch the variable user of the slide of the previous to 1 question if this sys var is greater than 0. This can be done by an action at the entrance to each slide of the question. You will need such action on enter also immediately after the last question slide (maybe on a blade of results, where you can also put the appropriate button to switch the content slides, or offer the possibility to go back).
  • For each slide content you will need another (conditionala tip enter action. Condtion will check the value of cpQuizInfoPassFail (or the equivalent for the slides before the test) AND the value of the var related to this question slide. If both are positive, ignore the slide (go to the next slide), if not, just stay on the slide. That action will be the same for all the slides in content related to a question. But another question, you will need a duplicate, because another user variable will be there. If you use CP7, this is an excellent example for joint actions.

  Hope this helps a bit, sorry that I am so busy.

  Lilybiri

• I can't do a conditional action with several decisions work

  I use 6 Captivate:

  Here is an example:

  The slide contains 2 objects - one is a button and the other is a graphic, seller.

  Entering the slide, a variable, v_button, is set to 0, and seller is hidden.

  I enclose a conditional action for the button to allow the user to click several times to show or hide the image.

  This conditional action works:

  IF:

  v_button is equal to 0

  ACTIONS:

  Show vendor

  Assign the v_button with 1

  ANOTHER THING:

  Hide the seller

  Assign the v_button with 0

  -------------------------------------------------------------

  This conditional action does not work:

  Decision 1:

  IF:

  v_button is equal to 0

  ACTIONS:

  Show vendor

  Assign the v_button with 1

  Decision 2:

  IF:

  v_button is equal to 1

  ACTIONS:

  Hide the seller

  Assign the v_button with 0

  What I am doing wrong?  I need to use many decisions because my real case requires 3 decisions.

  Thank you very much for your advice.  Never, I realized that I could layer smart buttons.  With your help, I solved the problem:

  I created 4 smart buttons, with the 2 green smart buttons on top 2 Brown buttons and attached a standard action to each of them:

  Button1On: (related to the Brown button 1)

  Hide

  Show

  Audio triggered stop

  Play the Audio

  Button1Off: (attached to the green button 1)

  Hide

  Audio triggered stop

  Button2On: (related to the Brown button 2)

  Hide

  Show

  Audio triggered stop

  Play the Audio

  Button2Off: (attached to the green button 2)

  Hide

  Audio triggered stop