[Config] 877 VPN - please help

Similar Questions

• Blocked Windows in config 3 3 Please help

  OK I tried safe mode does not work. I have my drive in vista but it does not to start , I went setting and changed the beginning towards the top but still nothing and I remember for the life of me what F key starts the disk he makes me crazy please help thanks

  "F10" is the use of function keys to select the boot drive option when starting.

  and to correct the Master Boot Record below are the commands,

  Bootrec /fixmbr
  Bootrec /rebuildbcd
  Bootrec /fixboot
  Zulfikar

• Configuration of VPN RV110W - please help

  First of all, I would like to thank you for all the tips I have ever set up a VPN before.

  I am looking for help on setting up a VPN connection to a remote device. I need to be able to connect from a laptop that could be in my office, home, or a hotel room in a city at random in North America. The RV110W will have a static IP address and the device behind him that I need to connect. What I need to know, I have to also take a RV110W with me when I travel to connect through a VPN for this device? Or can it be set up if I can connect from anywhere?

  Hi Bill,

  My name is Mehdi from the Cisco Technical Support.

  Customer support RV110W VPN IPsec and PPTP, and you can connect from anywhere using QVPN client or a Windows-based PPTP client.

  Before evrything, check if you have the latest firmware, if not here's the link to download the latest firmware: http://software.cisco.com/download/release.html?mdfid=283879340&software...

  Latest firmware is 1.2.0.10

  Here are the steps:

  Solution 1: Configure PPTP

  ---> Under VPN--> VPN Clients enable the PPTP server

  -IP address for the PPTP server: IP address of the PPTP server, for example if the router has the IP 192.168.1.1, we can have 192.168.1.200 (must be in the same subnet as the LAN and DHCP server)

  -IP address for the PPTP Clients: will give the range of the IP address to clients, in my view, is of maximum 5 IP

  -Under VPN--> Clients VPN--> VPN Client configuration table

  -Click Add a line and add the user name and password to enable checkbox and choose PPTP

  -Click the button Save

  Now on the PC to configure the client, here's example:

  http://www.strongvpn.com/setup_windows_7_pptp.shtml

  Solution 2:

  We need to download and install the client use IPsec QVPN QVPN from this link:

  http://software.Cisco.com/download/release.html?mdfid=283879340&software...

  -On the router under VPN--> VPN Client--> add Row and do the same steps, but instead of PPTP, choose QVPN

  -Also under firewall allow remote management on port 443

  now on the client he will ask for username and password for the client who already configured on the router and the server, the server is the public IP address of the router's WAN interface

  I hope that I was clear for these steps to configure the VPN, please rate and click on answer to help other client from cisco for more of her.

• Please help to I can't open config pc Tablet Windows 8

  I recently bought in a pawn shop a windows Tablet 8 badge it was perfect... and everything worked... I factory reset it so I can give it to my daughter... Well I don't know what she does for her that I could not open shop or settings of the PC... I managed to download a windows repair which fixed the app store... now I can open it... but I still cannot open PC settings... it opens for half a second then it closes... Please help someone... It's a Tablet, not a desktop computer or laptop and I don't have a keyboard please, any help will be appreciated

  Hello

  Maybe if you try to access it otherwise it might help...

  If you want to go to the recovery to do a RESET, for example...

  Right-click on the bottom left of the office windows icon, then select search...

  You will get a lot of options appear under the search... See if you can get to the Reset or something else from there...

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• looking for mixidj when I opened the second tab please help me ive tried everything I know

  My browsers opens OK for fire fox but when I opened a second search of mixi dj tab opens tried AFAIK I don't even find on my computer to uninstall it please help me if you can

  I've used about: config before but never knew it was editable until that time. Thanks for the help.

• The line address URL, google earch box box disappeared, please help!

  The URL address box and the Google search engine box normally at the top of the page disappeared. Also the buttons back/frorad are missing - please help!

  Hello

  Please try to go to the view (or Alt + V) > toolbars and enable (check) Bar of Navigation. If not, right-click on the + on the right of the last tab or space empty after and choose toolbar Navigation.

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Which is preferably that? module -quickly decode about: config entries - after installation, go inside on: config, right-click preferably, enable (check) results of MozillaZine Board, and once again right-click a pref and choose MozillaZine reference first.

  Keyboard shortcuts

  Files & Firefox profile folder

  Safe mode

  Problematic Extensions/add-ons custom

  Troubleshooting Extensions and themes

• I have problem with my iphone 6 s when I want to download on AppStore or go to error code wiil online games just 1009 I don't no what to do? Please help my ios is 9.3

  I have problem with my lphone6s when I want to download or go online or on wifi error come (code 1009) Please help I don't know what to do?

  1009 error means that you are trying to download on the app store in a

  country other than the one you are located in or from one another AppStore

  that you have an account. That error can also mean that you

  are in a country that is blocked.

  In which country are you physically located? In which country is your

  iTunes account? Which store AppStore/iTunes to the country you are

  try to download from? What VPN do you use?

• My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my e-mail is _ @_. ___

  My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my email is * address email is removed from the privacy *

  The people who answer questions here are, for the most part, volunteers who have no connection with Microsoft.  Ask your question every two minutes won't get you a faster response.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the spooler print don't rest not always running after you launched the command "net start spooler", follow these steps

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window
  dependent on the spooler of sc config = RPCSS
  net start spooler

  If the spooler still will not start, you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• (the backup completed, but some files were skipped--(0 x 80070003)) & (0 x 80070002))-Please help!

  Hey everybody...

  I tried for two days back my 64 bit Windows 7 system.  Whenever I do, I get the following messages saying the "backup completed, but some files were skipped.  (I get two error codes (0 x 80070003)) & (0 x 80070002))

  This is the description that is displayed in Notepad after the backup is performed:

  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\iJamez\Pics & Vids\Internal storage. Error: (System does not find the specified path. (0 x 80070003))

  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\iJamez\Pics & Vids. Error: (System does not find the specified path. (0 x 80070003))

  Backup has encountered a problem during backup of the C:\Users\James\Desktop\Contacts file. Error: (the system cannot find the specified file. (0 x 80070002))

  the iJamez folder is located under the folder James which is on my desk at the top of the page, that I him have also stored in my external hard drive... the order goes like this:

  PC: C:\James/iJamez/Pics & Vids

  Outer: D:\iJamez/Pics & Vids

  + Pictures and videos is I have sync it with my iPhone.

  The last line of the error is in what regards the Contacts... I installed Outlook Express and I noticed that the Contacts folder has been installed on my desktop and I deleted because I don't need.

  Is someone can you please help me understand this... It makes me crazy!

  Thanks in advance to all!

  James
  E-mail address is removed from the privacy * (please email if you directly want to advise me on how to fix this isssue)

  I SOLVED THE PROBLEM...

  What I had to do, is create a folder named "iJamez" inside:

  C:\Windows\System32\config\systemprofile

  Once I created the folder iJamez inside (see above) I then created another folder inside iJamez called Pics & Vids. Once all of these files, I did my backup worked fine. He didn't ignore any files at all.

  But of course, my only question is, why the hell did I have to create these folders in the first place? Why in the world the Vids & photos that I sync with my iPhone would have something to do with a full backup?

  I do not understand why, I am just happy it worked.

  Can anyone shed some light on why this took place?

  Thank you.

• Please help wifi does not not ACER aspire 4710g (wireless network card problem)

  Please help me

  C:\Users\ali>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt #.

  2

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Network adapter on Broadcom 802.11 g

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 318775098

  DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Broadcom NetLink (TM) gigabit Ethernet

  Physical address.... : 00-1D-72-1B-B7-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Anchorfree VPN #2 HSS

  Physical address.... : 00-FF-03-C6-CD-54

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card Anchorfree VPN HSS

  Physical address.... : 00-FF-EF-4A-57-34

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  C:\Users\ali >

  AWI

  There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

  I would start by removing the current driver of sifi and install the latest driver available.

  The IP address for the above connection is

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• Setup iTunes PLEASE HELP error!

  Hi, I'm having trouble installing iTunes on windows 7 Home premium.  I get the error message:

  Error writing to the file C:\Config.Msi\cdd0c.rbf. Make sure you have access to this directory
  Can someone please help? I tried a number of online suggestions already such as the abolition of the old iTunes, empty the temporary files, etc. but also call apple and Microsoft and no one can help!
  The letters after the------seems to change every time that I have try as well.

  Have you looked at the Apple forum and tried these (some examples):

  https://discussions.Apple.com/message/20181632#20181632 apparently if you have Kaspersky AV
  or
   
  https://discussions.apple.com/thread/4283773?start=0&tstart=0 a tool to uninstall CNET Download (Revo).
  I must say, I did not have this problem and found these just a Google, so I can't check anyway. It will be useful.

• PIX 501 config probs - beginner needs help!

  Have a bit of a nightmare trying to set up external access to one of our servers through the pix. He is currently in its factory config.

  I tried assiginig an Acl to allow the remote desktop on port 4999 from outside, but it doesn't seem to work. I have attached the config in its current form - please help this is driving me crazy!

  1.) basically the NAT public IP address to a private IP address is on the right of ADSL router. Check that!

  ADSL Public IP TCP 4999 to PIX outside TCP 4999

  (2.) the config on the PIX should be good, as I posted it.

  Redirect port of PIX outside IP TCP 4999 inside private IP TCP 4999

  3.) make sure that your server meets the port TCP 4999 really!

  On windows or Unix =

  netstat - year

  You should see something like this:

  TCP 10.0.0.3:4999 0.0.0.0:0 LISTENING

  4.) another way of troubleshhot might be using "capture" on the PIX. This like tcpdump UNIX a sniffer that can show packets on an interface. I do not remember what version, this command was introduced, but you will need at least an OS PIX 6.3.x to have.

  Example:

  access-list 120 permit tcp any any eq 4999

  capture of 4999 interface 120 outdoor access list

  See Access Snapshot 4999 list 120 retail

  To use remove:

  no interface access-list 120 captures 4999 out

  No capture 4999

  Change inside interface:

  capture of 4999 interface 120 of inside access list

  See Access Snapshot 4999 list 120 retail

  sincerely

  Patrick

• To:Patrick.Iseli, Please help! PIX506 problem.

  Hi, patrick!

  Sorry, after you.

  I read your ad article abot PIX506 and NETGEAR DG814 configuration.

  I have somting problem, PIX506 configuration. AND it is similar to your PIX when troubleshooting.

  Please, help me!

  Please see below the text and attachments.

  Thank you!

  Hi, Expert everyone!

  I can't write ENGLISH well, that this will cause a problem of communication for YOU.

  I meet a problem to configure the firewall to PIX506.

  I have a firewall PIX506 and NETGEAR RP614 IP-sharer.

  Under PIX506 firewall, there are two Windows servers.

  A Windows 2000 Server is the Web server and DNS, a different Exchange 2003 server based on Windows 2003 server.

  But the problem is...

  I do not receive an email, please send an e-mail very well!

  I have document attached on PIX506 config and my network diagram.

  It's a crazy problem.

  Please please please help me, get Expert everyone.

  I posted the config in the "problem, DNS and Eachange Server Cofiguration PIX506!

  sincerely

  Patrick