Config for the SAN array issues

Similar Questions

• How can you specify the default value for the undefined array elements

  According to aid LV, the tables have two default values, the normal default value and the default value for the undefined array elements.

  I assume that there must be a way to specify the default value for later, but I can't find it anywhere.  Any ideas?

  I know that you can drag the item out of the table container.  Change the default value on this scalar element.  Then drag the item in table tank.

• prepare the config for the model/tool switches

  Guys,

  I'm trying to find out if there is a tool to prepare config Cisco routers/switches. I'm looking to prepare the basic config with some VLANS, static IP, etc. of the AAA. Should I use GNS3 as Simulator to simulate a router and configure it to serve as a model or if there is another free light weight tool where I can test config for typo errors or something.

  Thanks in advance!

  If you have existing switches just the running-config and get some simple editor like Notepad and change the IP addresses and other things

  Add No. SHUTDOWN on the interfaces, because by default they are not upward, and when you do a show running-config it does not appear as no. SHUTDOWN.

• Best Config for the new MBP 13 "retina? (decide between the RAM and the space... i7 also confirmation is worth)

  I'm in the market for a new MBP 13 "retina and I have a few questions about where max out of the unit.

  What I have... I currently have a renovated MBP 13 "retina, end 2012, 2.9 GHz, 8 GB to 128 GB of storage. I was especially pleased with this machine. I love the SSD and the quick start. The only regions that in deca for me were video compression and storage of physical disk speed. I currently have about 30 GB HD free space, but it's because I'm a Spartan and store essential files only on the MBP. Without a doubt, I want to double my storage on the following I buy (at least it will give it more leeway to work properly).

  What I do for a living... I am a writer and also a vlogger. I opted for the i7 chip because video compression is painful on the cell current, particularly H264. I use MS Word, Photoshop, Quicktime Pro and compression software to take videos and convert raw. MOV H264. So my core processing tasks, record audio/video and audio/video compression. I turn on photoshop work.

  What I would like to get...

  • MacBook Pro 13 inch with Retina display
  • 3.1GHz dual - core Intel Core i7, Turbo Boost up to 3.4 GHz
  • Intel Iris 6100 graphics card
  • 8 GB RAM
  • 256 GB HD

  My Questions:

  1. It is better to push either the HD or RAM, up to 16 GB or 512 GB, respectively? I can't afford both. Or does save $200. (I upgraded in general on 3-year cycles)
  2. I guess that the i7 will help with the compression of various media or export tasks I have? Usually, I have to record videos using the internal camera and then export it into a format more suitable for delivery. Same with the audio (except that I capture with a blue Yeti MIC). Basically, I want to just speed up export jobs and compression. To do this, I guess the i7 and turbo boost will shine?

  Just curious if anyone has any advice... I would like to purchase today. Thank you! I'm leaning towards i7 with 256 SSD and 8 GB of RAM. Since I already have an i7 on my 2012 model, descending into the processor speed is not really sense (2.9-2.7). Nor do the same (2.9 to 2.9). I'd love to 16 GB of RAM, but it pushes the machine to near $2 K.

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx

• Vcenter/VSphere/ESX 5.0.0 question: could not download /opt/vmware/www/build/Tenacity.iso for the san-core8 data store. == > Build fails

  I built this different ways now, and I still get this same exact error. I spin as 'Admin' and I have so any available privilege.

  There are no special characters in the password, I tried this file generation and he got away on my computer than this (v-soft bootable with interface).

  Please help me get to the next step, I'm stuck here.

  Everything seems fine until:

  09/10/2013 18:00:25 [info] validation available disk space...

  09/10/2013 18:00:25 [info] prepares the operating system installation files.

  09/10/2013 18:00:25 [info] looking for /opt/vmware/www/ISV/ISO/CentOS-6.4-x86_64-bin-DVD1.iso

  09/10/2013 18:00:25 [info] Validating md5 checksum for /opt/vmware/www/ISV/ISO/CentOS-6.4-x86_64-bin-DVD1.iso (may take a few minutes)

  09/10/2013 18:01:15 [info] verification of repositories of request for the installation of the packages packet...

  09/10/2013 18:01:16 [info] creating package repositories...

  09/10/2013 18:01:16 [info] create the virtual machine model.

  09/10/2013 18:01:17 [info] VM carrying from the Studio to the host configuration. This may take a few minutes...

  09/10/2013 18:02:20 [warn] cannot download /opt/vmware/www/build/Tenacity.1/Tenacity.1_provstart.iso for the s-core9 data store.

  09/10/2013 18:02:20 [warn]

  %3 %7% 11% 15% 19% 23% 26% 30% 34% 38% 42 failure: (22, ' the requested URL returned error: 401')

  09/10/2013 18:02:20 [error] met a unrecoverable build error!

  I am able to use this model for Centos on my computer actually install and build a paralytic with centos on that - unfortunately I do a

  hacks to make it work properly and I cannot get it to install other real applications (perhaps there is a new version for workstation 10?)

  So I went to vsphere, and I KNOW my generation model is ok, at least to get the installed operating system.

  What information can I give you or what can I try, thanks!

  Is it really "sort of" loading ie 42% or which is a total failure?

  OK, I have a build that WORKED, now I see what you mean about watching build/deploy the VM guest.

  Here is the solution to my problem: our vcenter uses names with spaces, we also use the domain names for our connections. In addition, each admin password was 'special characters', that I've debugged meticulously by ALL of them and much more. Basically, it did not matter that I have "URL" code things, used new tools or edited different scripts to encode things one way or another.

  What finally gave us successes was to go to a 'clean' Vcenter implementation that

  (a) use/did not require a domain name (not / credentials)

  (b) all had the "BACK original' legal names, IE no spaces, no special characters, etc..

  (c) the passwords contained NO "special characters".

  (because I changed this way, 'URL' encoding didn't work, tried it)

  Moral of the story: building a new, simply configured Vcenter or get one and use it.

  (Note: I even downloaded a new ovftool and tried every way that I could but it did not success)

• No State of health for the Smart Array P400i controller

  Hello

  I installed VMware ESXi 3.5 U3 with HP Management Agents on my HP Proliant DL360 G5 server with a Smart Array P400i controller.

  When I look at the State of health of my material in the VMware Infrastructure Client, I can't control my storage controller.

  The Smart Array P400i controller is compatible (checked with VMWare HCL) with ESXi 3.5 U3.

  So why can I not follow it?

  Thanks in advance,

  Kristof

  The implementation of ESX ICD (health) does not support HP Smart Array controllers. You can't, so not able to monitor volumes P400i RAID controller to health of ESX.

• No difficulty for the read head / issue scrubber with El Capitan?

  Hi, I have change all the way to Mountain Lion of El Capitan due no update with first (CS6) on the iMac and recently upgraded to update / support for OS, Chrome, etc., go ahead. After update, I encountered the problem of the read head I've seen others face - after washing of gases, and release the mouse, the playback cursor reflects the movements that you have just made.

  I'm just curious, from April 2016, if there is still no workaround or fix for this. I upgraded to El Capitan 10.11.4. Unfortunately I can't go back to Yosemite (as far as I can tell) as I ever had on my system - this has been offered as a solution.

  Can anyone help?

  Thank you

  Sean

  What is your problem?

  First read CTI head repeat the movements of the mouse, error

  the last update of the cloud 2015cc fixed this one.

• The mx prefix for the element mx:Array is not bound

  Hi all

  I have a component:

  <? XML version = "1.0" encoding = "utf-8"? >

  "< mx:Array id ="stop""">

  "" < mx:Object label = "Flex"

  " thumbnailImage ="http:/someURL "" "

  " fullImage = ' http://someURL " />

  < / mx:Array >

  < mx:Canvas ' xmlns:mx = ' http://www.Adobe.com/2006/MXML ">

  < / mx:Canvas >

  It gives me an error

  The prefix "mx" for the "mx:Array" element is not bound

  I need a root here, but I can't use mx:Canvas, what would be the best choice?

  see you soon

  Luca

  Hi Luca,

  Try to put the picture inside your canvas, rather than outside...

  
  http://www.Adobe.com/2006/mxml">
  

  thumbnailImage = "http:/someURL."

  fullImage ="http://someURL" / > "

  
  

  Why you don't want to use mx:Canvas as the root of your component Locator...? However the component no matter what you use try to put the your tag inside your component root, otherwise you will be lifted the same error as indicated. The error occurs as the compiler does not recognize the namespace mx for the table since you declared outside the root of your component.

  Thank you

  Jean Claude

• Copy startup-config for pix via TFTP

  Where am I missing it? I know it's possible to copy a config pix down via Tftp using the

  WR net tftpIP: filename

  How can I do the reverse copy, the startup-config for the pix using tftp.

  Easy to do with a router or a switch. I don't see any docs on ORC that specify where to copy the startup-config.

  Hello

  Use the Net Config command

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_63/cmdref/c.htm#wp1055799

  Thank you

  Nadeem

• VPN is not talk for the subnet behind a remote router

  Hi all

  I was hitting my head on the wall for a few days everything that is wrong with my configuration ASA...

  That's what I got:

  AnyConnect vpn (10.10.70.0/24)-online tunnel => ASA5505 performer v9.1.2 (10.10.20.1)-online (10.10.20.2) router (10.10.50.1) 1841-online my environment tour (10.10.50.0/24)

  VPN is allowed to authenticate, get an address, ping 10.10.20.0/24 but unable to pass traffic (ping, ftp, etc.) 10.10.50.0 network at all.

  Using EIGRP between ASA and 1841, tried static set time 'network' then 'redisturbute' and the ' redisturbute static route-map ", still no luck.

  Found several docs, tried, doesn't seem to help...

  https://supportforums.Cisco.com/thread/2206416

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00809d07de.shtml

  Help, please...

  Attach the configs for the ASA and router

  Thank you in advance!

  Keith S.

  Hi Keith,

  You are using IKEv1 or IKEV2.

  It comes to your configuration:

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

  Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1

  Crypto-map dynamic outside_dyn_map 20 the value reverse-road

  test of dynamic-map 10 crypto-card, the value reverse-road

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  The dynamic map that is applied to the interface is SYSTEM_DEFAULT_CRYPTO_MAP which is an ikev2.

  But the question is not the one. Depending on your configuration, there is a runnning between the ASA and the router EIGRP and according to your router table routing does not know where is 10.10.70.0/24 subnet is. To inject the subnet pool VPN in the routing table that we need an arriere-route control that you configured on a card which is not in use. Try this:

  Crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.

  And let me know if it helps.

  Thank you

  Jeet Kumar
  

• Clone &amp; new Config on the different data store

  Hi all

  I had a problem where the user try to clone or create a new configuration where the original VM model are stored is full.

  When the data store is almost full, I turn off the "VM creation" in the section resources, I would do this or the LM will be able to use the different data store? otherwise how can I config for the user can store data different from Julie then create a new configuration or a clone.

  Thank you

  Error message here: -.

  * "Clone VM" operation cannot be performed because the data store 'VMFS02' is not

  Enabled.* yes I disable 'VM Creation' resources because of this LUN is almost exhausted.

  In this case, you must use SSmove to migrate the entire tree of virtual machines from a store of data with more free space

• Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

• In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (140233)

• Hot for the config of the Bios in my Qosmio F20-103

  Hello

  I have a Qosmio F20-103, windows xp has been installed on this subject, I need to install a new windows xp because I got the virus. I went into bios set up Boot Device Priority ad: CD-Rom-Lan-disk floppy hard-drive and I can't start my cd rom hollow something happens.

  So I went in the old and infected the system (xp operating system) device introduced my Xp Cd in the CD-ROM and show me the windows with a few options, so I pressed on install Windows XP now and begin to deal with some files and restar the laptop... when it turns turns out the laptop Boot and read my Windows Xp CD.

  So why this time did he? OK so I went in the press of Enter - F8 installacion program (accepts the terms of the contract) press on enter new install. but before that I had to remove the particion with XP infected previously ok I deleted everything and stars adaptation of the file... copied the 100% of the files requiered.

  Setup restar the computer and the load of a new system of xp we guess his will install the operating system (Xp) but the pop up an error message, new and clean so "insert the windows xp service pack 2 cd in the cd rom a pres enter" I said what! = S was the xp cd in the CD-ROM. I agreed bottom stamped and said. installers must 'asm' search for files for the directory to continue facilities plesea.

  Tried to search for this file, but it seems like there was no Xp Cd in the CD-ROM then I restar the laptop... this laptop will not start CD ROM more. The bios options has not changed.

  Now, I can not install windows, I don't know what to do. And I really need to install windows, but can't find a way to make the laptop starting by cd rom.

  I tried to re config the bios setting but nothing happened.

  You guys can give me some ideas what to do please?

  will be thanksfull with you.

  Sorry for my bad English.

  Hi mate

  The history of sounds strange for me

  First of all, it would be interesting to know if your CD/DVD drive is able to start using another disc; for example, a disk of Linux or a self created WinPE disc.
  (What is WinPE-> http://apcmag.com/windows_pe_20_a_tiny_version_of_windows_for_system _maintenance.htm)

  This would use to determine if the CD/DVD would start from all drives another.

  You can also try to boot from the Win XP disc by pressing the F12 key immediately after that the laptop is turned on.
  Now you should be able to choose ODD as a source of start-up, it will allow a start menu.

  Another idea. Maybe the CD/DVD drive cannot start until this special disc
  In this case, it would be advisable to copy the Win XP on another CD or DVD disc.
  After that, you can try to boot from the new drive copied.

  Of course the Win XP must contain the SP2!

  Last but not least don't forget to include the RAID drivers because the F20 supports RAID!