Configuration ceilometer is failure to 51% in VMware IntegratedOpenstack

Similar Questions

• Configuration Windows Update failure

  When I bought my PC, it is already pre-installed Windows 7 Pro and I do not have the disc with me. Usually, I keep my automatic update. last 2 days I update my IE 7 to 11. Which was the day I turn on my automatic update. Today, when I turn on my PC, I got the message "failure configuration Windows Update... "I waited for hours and it will not be the end. I try to turn it off, then restart. It came again the same screen. Even in safe mode.

  How can I cancel the update? How can I get my windows to start?

  Help, please!

  Hello

  Thanks for posting in the Microsoft Community.

  We appreciate to try few troubleshooting steps.

  I suggest you to refer to the Microsoft Help article and check if it helps to resolve the issue.

  https://support.Microsoft.com/en-us/KB/949358

  I hope this helps. Just reply to us with the State of the question.

  Thank you.

• How to configure the server Esxi 3.5 on Vmware workstation 7

  Hello

  I m new technology Vmware Esxi. I will join the formation of VCP5 next month. But before participating in this training, I would take it somewhere on the same experience. So, for this, I install Vmware workstation 7 on my home PC. I have install Esxi 3.5 server on one machine virtual workstation.

  I just edit the machine configuration file virtual vmware [C:\Documents and Settings\a48923\My Documents\My Machines\Esxi virtual-01] as shown below which is marked in "BOLD" letter.

  scsi0. Present = 'TRUE '.
  scsi0.virtualDev = "free".
  memsize = "1024".
  scsi0:0. Present = 'TRUE '.
  scsi0:0. FileName = 'Esxi - 01.vmdk.
  IDE1:0. Present = 'TRUE '.
  IDE1:0. AutoDetect = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-raw"
  floppy0.startConnected = "FALSE".
  floppy0. FileName = "".
  floppy0. AutoDetect = 'TRUE '.
  ethernet0. Present = 'TRUE '.

  ethernet0.virtualDev = "vlance.
  ethernet0. ConnectionType = "bridge".

  monitor_control.restrict_backdoor = TRUE
  monitor_control.vt32 = TRUE
  Monitor.virtual_exec = "automatic".

  ethernet0.wakeOnPcktRcv = "FALSE".
  ethernet0. AddressType = 'generated '.
  roamingVM.exitBehavior = 'go '.
  displayName = "Esxi-01.
  guestOS = "redhat".
  NVRAM = "Esxi - 01.nvram.
  virtualHW.productCompatibility = "esx".
  extendedConfigFile = 'Esxi - 01.vmxf.
  ethernet0.generatedAddress = "00: 0C: 29:32:f8:b3.
  UUID. Location = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
  UUID. BIOS = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
  cleanShutdown = 'TRUE '.
  Replay.Supported = 'TRUE '.
  Replay.FileName = «»
  scsi0:0. Redo = «»
  vmotion.checkpointFBSize = "16777216.
  ethernet0.generatedAddressOffset = '0 '.
  tools.remindInstall = 'TRUE '.
  ethernet0.linkStatePropagation.enable = "FALSE".
  tools.syncTime = "FALSE".
  ethernet0.VNET = "VMnet8.

  After you change the configuration file. I started the Esxi server. But when booting, it shows lmdriver failed to load. When I tried to configure the Exsi network, the back always prompt to reset the default settings of the network. Then I searched the internet, I found this machine NIC not to support Esxi. Is there a way to configure the Microsoft loop back adopter or any virtual adopter for esxi? So that I can install several esxi server on a single machine on vmware workstation and can be communicate with each other.

  With VMware Workstation 7 you should not need to manually configure the .vmx file. Create a new custom virtual machine and select ESX as the guest operating system. This will configure the virtual material suitable as an E1000 network adapter...

  André

• GSM7224v2 loses the configuration after power failure

  As the topic title says - this device (new for me but flea market) loses its configuration after power off.

  I don't see any button cell within the unit for volatile memory backup. Surely the configuration lives in non-volatile storage?

  I am being dumb and I'm missing something?

  Hi neidlo

  Welcome to the community!

  Yes configuration lives in a non-volatile memory, when it is saved. Until it is saved, it is in RAM.

  When configuring the switch, it is not automatically saved. Using Web Interface (GUI)? A "Save" button should do.

  Please let us know whether or not this was the burden

  Kind regards

• Failure before brain su Vmware

  Buonasera a tutti,

  Ho tried a search in archivio my non ho trovato nulla, quindi ho pensato di una nuova discussione open.

  Premesso questo piccolo dettaglio, avrei need di monitorare I brain del mio Server su cui e installata the Vmware Esxi 5, con licenza essential version more.

  CI sono sono tutti server linux one could leave it Vcenter che e knew Windows, I wanted to know is it e modo di lo brain dei status links. In linux by vedere IO is UN disco if sta guastando uso my smartctl- a/dev/hda he comando ho discovered che tale comando non su funziona vmware in quanto I server virtuali brain sehen e ovviamente non, I brain substitutes.

  MI chiedevo is dal pannello di Vsphere o anche solo a riga di comando sulla porta ssh c dell 'esxi' e a modo by links Hardware e nello specificio he fail pre dei brain che mi aiuta a understand be un disco if sta guastando oppure e gia guasto.

  Ora of da want possa Sin help came.

  Saluti

  Andrea Giuliano

  Prego

  SE e a Dell, allora it software che devi cercare e Dell OpenManage Server Administrator, da questo you can remotamente monitorare I server, a patto che abbiamo da I VIB drivers:

  http://www.Dell.com/support/drivers/us/en/555/DriverDetails/DriverFileFormats?DriverID=Y0WHR&FILEID=2990390081&ProductCode=PowerEdge-R410&urlProductCode=false

  No Yes honestly is OMSA gratuito o sia a pagamento pero.

  Ciao,.

  Luca.

• Configuration connection between two virtual machines on VMware Player

  Hello

  I have a host machine running Windows 7, which is connected to my company's intranet. On this machine, I have two OS guests on VMware Player:

  VM1 - Running Windows Server 2003, in my company intranet

  VM2 - Running CentOS 5, not registered in my company intranet.

  The second of the two is a pre-packaged VM, fully operational to run a complex database system that has been downloaded from the software provider.

  I need to set up the environment such as the VM1, an application can connect to the database running on computer 2.

  For the moment I can do the following with success-

  * Ping the host to VM1 and vice versa

  * Ping the host to VM2 and vice versa

  * Ping to VM1 VM2

  However, I don't do a ping of VM1 VM2.

  Can someone please explain why this is the case? In addition, please suggest me on the best way to get this working environment. I prefer to do the minimum to juggle the VMS as they run important applications. In addition, it is not possible to save VM2 on my intranet, if that would solve the problem.

  Thanks in advance to anyone who takes the time to read and answer.

  EDIT: Just noticed that I am able to access restricted intranet websites through VM2.

  Ahhhh, presto! Easy solution!

  All you need to do is change the 2 virtual computer hardware settings and change the network card.

  RightClick the VM, in settings, then replace the network card of NAT in bridge

  See this screenshot for a Visual:

  http://communities.VMware.com/servlet/JiveServlet/showImage/2-1819012-15730/VMware.jpg

  It's working now?

  See you soon,.

• Oracle Net Configuration Assistant Installation failure

  I'm installing 11 G R2 on Fedora 12.
  
  Installation got 95% and shows the following error
  [INS 20802] Oracle Net Configuration Assistant failed
  
  Naturally he is said to have a look at the InstallActions newspaper that said to check the trace log. The lines of last 100 or so of the trace log is below, anyone can help as to where I can begin to solve this problem?
  
  INFO: Started named Plugin: Oracle Net Configuration Assistant
  INFO: Found associate job
  INFO: From 'Oracle Net Configuration Assistant.
  INFO: From 'Oracle Net Configuration Assistant.
  INFO: Parsing of command line arguments:
  INFO: Setting "orahome" = /u01/app/oracle/product/11.2.0/dbhome_1
  INFO: Setting "orahnam" = OraDb11g_home1
  INFO: Setting "instype' typical =
  INFO: Setting "inscomp' = ano, machine virtual Java, client, server, oraclenet
  INFO: Setting "insprtcl" = tcp
  INFO: Setting 'cfg' = local
  INFO: Setting "authadp" = NO_VALUE
  INFO: Setting "responsefile" = /u01/app/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
  INFO: "Silent" parameter = true
  NEWS: Fact parsing command line arguments.
  INFO: Oracle Net Services Configuration:
  INFO: Profile complete configuration.
  INFO: Oracle Net Listener startup:
  INFO: Listener control running:
  INFO: /u01/app/oracle/product/11.2.0/dbhome_1/bin/lsnrctl start LISTENER
  NEWS: Auditor complete control.
  INFO: Beginning of earpiece failed.
  NEWS: Check the file path for more details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-10040811AM5707.log
  INFO: Oracle Net Services Configuration failed. The exit code is 1
  INFO:
  CAUTION:
  INFO: Finished named Plugin: Oracle Net Configuration Assistant
  [root@fedora1 logs] # cd/u01/app/oracle/cfgtoollogs/netca
  [netca root@fedora1] # ls
  netca_OraDb11g_home1 - 10040811 AM 5707 .log trace_OraDb11g_home1 - 10040811 AM 5707 .log
  [netca root@fedora1] # cat trace_OraDb11g_home1 - 10040811 AM 5707 .log
  [main] [2010-04-08 11:57:08.620 EST] [NetCALogger.initTrace:203] Oracle Net Configuration Assistant: 10040811 AM 5707
  [main] [2010-04-08 11:57:08.637 EST] [NetCALogger.initTrace:204] Oracle home: /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:08.638 EST] [NetCALogger.initTrace:205] Base Oracle: / u01/app/oracle of
  [main] [2010-04-08 11:57:08.638 EST] [NetCALogger.initTrace:206] The Oracle Home name: OraDb11g_home1
  [main] [2010-04-08 11:57:08.717 EST] Setting [InventoryUtil.getOUIInvSession:347] YES READ at ACCESSLEVEL_READ_LOCKLESS
  [main] [2010-04-08 11:57:08.718 EST] [HAUtils. < init >: 188] Yes location/u01/app/oraInventory/ContentsXML
  [main] [2010-04-08 11:57:08.741 EST] [Version.isPre:274] version to be checked 11.2.0.1.0 version to check main against10
  [main] [2010-04-08 11:57:08.742 EST] IsPre.java [Version.isPre:285]: return FALSE
  [main] [2010-04-08 11:57:08.759 EST] [OCR.loadLibrary:308]
  Constructor inside the OCR
  [main] [2010-04-08 11:57:08.776 EST] [OCR.loadLibrary:316] Going to load the library of ocr
  [main] [2010-04-08 11:57:08.777 EST] [sPlatform.isHybrid:67] = Linux osArch osName = i386 rc = false
  [main] [2010-04-08 11:57:08.784 EST] [sPlatform.isHybrid:67] = Linux osArch osName = i386 rc = false
  [main] [2010-04-08 11:57:08.784 EST] [Library.load:254] Library loading /u01/app/oracle/product/11.2.0/dbhome_1/lib/libsrvmocr11.so
  [main] [2010-04-08 11:57:08.975 EST] [OCR.loadLibrary:318] responsible for the ocr libraries
  [main] [2010-04-08 11:57:08.975 EST] [OCR.isCluster:939] Call OCRNative for isCluster()
  [main] [2010-04-08 11:57:09.051 EST] [OCR.isCluster:943] Results of OCR = true
  [main] [2010-04-08 11:57:09.052 EST] [OCR.isCluster:955] Boolean result = false
  [main] [2010-04-08 11:57:09.055 EST] [CmdlineArgs. < init >: 110] The initialization of the array of variables...
  [main] [2010-04-08 11:57:09.055 EST] [CmdlineArgs. < init >: 116] Initialization of NetProperties...
  [main] [2010-04-08 11:57:09.063 EST] [CmdlineArgs.initArgs:133] Initializing the command line arguments...
  [main] [2010-04-08 11:57:09.063 EST] [CmdlineArgs.parseLogParam:290] The argument/log analysis...
  [main] [2010-04-08 11:57:09.079 EST] [CmdlineArgs.parseLogParam:345] Return = null logfile
  [main] [2010-04-08 11:57:09.083 EST] [CmdlineArgs.setOraArgs:236] Configuring the Oracle arguments...
  [main] [2010-04-08 11:57:09.083 EST] [CmdlineArgs.setOraArgs:240] Past Oracle Home = /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:09.083 EST] [CmdlineArgs.setOraArgs:243] Read Oracle Home = /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:09.084 EST] [CmdlineArgs.setOraArgs:246] Read Oracle Home ID =
  [main] [2010-04-08 11:57:09.084 EST] [CmdlineArgs.setOraArgs:249] Read Oracle Home name = null
  [main] [2010-04-08 11:57:09.084 EST] [CmdlineArgs.compareOraHome:183] Comparing Oracle homes...
  [main] [2010-04-08 11:57:09.084 EST] [CmdlineArgs.compareOraHome:184] Home Oracle 1 = /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:09.085 EST] [CmdlineArgs.compareOraHome:185] Home Oracle 2 = /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:09.085 EST] [CmdlineArgs.compareOraHome:224] Returns the value true
  [main] [2010-04-08 11:57:09.085 EST] [InitialSetup.configureOPS:4504] The cluster mode is turned OFF
  [main] [2010-04-08 11:57:09.085 EST] [InitialSetup. < init >: 4028] TNS_ADMIN is: null
  [main] [2010-04-08 11:57:09.092 EST] [OPSUtil.getHomeVersion:446] GetHomeVersion inside...
  [main] [2010-04-08 11:57:09.092 EST] [OPSUtil.getHomeVersion:447] oracleHome = /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:09.092 EST] Oracle.sysman.assistants.util.OracleHome [OPSUtil.getHomeVersion:451] object = /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:09.092 EST] [OracleHome.getVersion:877] Called OracleHome.getVersion. Current version: null
  [main] [2010-04-08 11:57:09.096 EST] Setting [InventoryUtil.getOUIInvSession:347] YES READ at ACCESSLEVEL_READ_LOCKLESS
  [main] [2010-04-08 11:57:09.096 EST] [OracleHome.getVersion:896] HomeInfo /u01/app/oracle/product/11.2.0/dbhome_1,1
  [main] [2010-04-08 11:57:09.449 EST] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0
  [main] [2010-04-08 11:57:09.449 EST] [OracleHome.getVersion:943] The current Version of the inventory: 11.2.0.1.0
  [main] [2010-04-08 11:57:09.449 EST] [OracleHome.getVersion:948] using sqlplus: /u01/app/oracle/product/11.2.0/dbhome_1/bin/sqlplus
  [main] [2010-04-08 11:57:09.450 EST] [OPSUtil.getHomeVersion:452] Return Version 11.2.0.1.0 = oracleHome
  [main] [2010-04-08 11:57:09.450 EST] [OracleHome.getVersion:877] Called OracleHome.getVersion. Current version: 11.2.0.1.0
  [main] [2010-04-08 11:57:09.450 EST] [OracleHome.getVersion:943] The current Version of the inventory: 11.2.0.1.0
  [main] [2010-04-08 11:57:09.450 EST] [OracleHome.getVersion:948] using sqlplus: /u01/app/oracle/product/11.2.0/dbhome_1/bin/sqlplus
  [main] [2010-04-08 11:57:09.450 EST] [InitialSetup. < init >: 4041] Location of the admin is: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin
  [main] [2010-04-08 11:57:24.074 EST] [ConfigureProfile.setProfileParam:136] Definition of NAMES. DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
  [main] [2010-04-08 11:57:24.100 EST] [ConfigureProfile.setProfileParam:136] Parameter ADR_BASE: / u01/app/oracle
  [main] [2010-04-08 11:57:24.107 EST] [HAUtils.getHASHome:583] Oracle of the properties of the system: /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:24.108 EST] [HAUtils.getCRSHome:540] How to configured CRS / home for Oracle home (/ u01/app/oracle/product/11.2.0/dbhome_1)...
  [main] [2010-04-08 11:57:24.109 EST] [GETCRSHOMEUtil. < init >: 76] ToolName: getcrshome - tool rental: /u01/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: [Ljava.lang.String;@472d48
  [main] [2010-04-08 11:57:24.110 EST] [IsCmdScv [NativeSystem.isCmdScv:471]: cmd =]
  [main] [2010-04-08 11:57:24.111 EST] [RuntimeExec.runCommand:75] Runtime.exec () call with the command
  [main] [2010-04-08 11:57:24.111 EST] [RuntimeExec.runCommand:77] / bin/sh
  [main] [2010-04-08 11:57:24.111 EST] [RuntimeExec.runCommand:77] - c.
  [main] [2010-04-08 11:57:24.113 EST] /U01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome [RuntimeExec.runCommand:77]
  Wire [2] [2010-04-08 11:57:24.126 EST] [StreamReader.run:61] in StreamReader.run
  [main] [2010-04-08 11:57:24.126 EST] [RuntimeExec.runCommand:142] RunCommand: wait for the process
  [Thread-1] [2010-04-08 11:57:24.130 EST] [StreamReader.run:61] In StreamReader.run
  Wire [2] [2010-04-08 11:57:24.253 EST] [StreamReader.run:65] ERROR > / u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: permission denied
  [main] [2010-04-08 11:57:24.253 EST] [RuntimeExec.runCommand:144] RunCommand: treat returns 127
  [main] [2010-04-08 11:57:24.254 EST] [RuntimeExec.runCommand:161] RunTimeExec: output >
  [main] [2010-04-08 11:57:24.254 EST] [RuntimeExec.runCommand:170] RunTimeExec: error >
  [main] [2010-04-08 11:57:24.254 EST] /U01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome [RuntimeExec.runCommand:173]: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: permission denied
  [main] [2010-04-08 11:57:24.254 EST] [RuntimeExec.runCommand:192] Return of RunTimeExec.runCommand
  [main] [2010-04-08 11:57:24.281 EST] NativeSystem.runRemoteExecCmd [CmdToolUtil.doexecute:372] failed. Command = /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = env [] = null
  [main] [2010-04-08 11:57:24.345 EST] [HAUtils.isHASConfigured:349] Ignoring the exception in isHASConfigured: PRCT-1011: cannot run 'getcrshome '.
  [main] [2010-04-08 11:57:24.345 EST] Oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome (ClusterwareInfo.java:423) [HAUtils.isHASConfigured:350]
  oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
  oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
  oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
  oracle.net.ca.InitialSetup.checkHAConfiguration(NetCA.java:4653)
  oracle.net.ca.InitialSetup. < init > (NetCA.java:4075)
  oracle.net.ca.NetCA.main (NetCA.java:405)
  [main] [2010-04-08 11:57:24.346 EST] [InitialSetup.checkHAConfiguration:4691] HA Server is NOT configured.
  [main] [2010-04-08 11:57:24.348 EST] [NetCAResponseFile. < init >: 68] Initialized response file: /u01/app/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
  [main] [2010-04-08 11:57:24.350 EST] [NetCAResponseFile.getInstalledComponents:107] Installed the components of response file: server, net8, Java virtual machine
  [main] [2010-04-08 11:57:24.350 EST] [NetCAResponseFile.getVirtualHost:164] Virtual host of the answer file: null
  [main] [2010-04-08 11:57:24.350 EST] [SilentConfigure.performSilentConfigure:174] Profile configuration type.
  [main] [2010-04-08 11:57:24.351 EST] [ConfigureProfile.setProfileParam:136] Definition of NAMES. DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
  [main] [2010-04-08 11:57:24.351 EST] [ConfigureProfile.setProfileParam:136] Parameter ADR_BASE: / u01/app/oracle
  [main] [2010-04-08 11:57:24.353 EST] [SilentConfigure.performSilentConfigure:182] Configuring the typical listener.
  [main] [2010-04-08 11:57:24.423 EST] [ConfigureListener.isHASConfigured:1425] The api call SRVM to see if Oracle Restart is set...
  [main] [2010-04-08 11:57:24.423 EST] [HAUtils.getHASHome:583] Oracle of the properties of the system: /u01/app/oracle/product/11.2.0/dbhome_1
  [main] [2010-04-08 11:57:24.424 EST] [HAUtils.getCRSHome:540] How to configured CRS / home for Oracle home (/ u01/app/oracle/product/11.2.0/dbhome_1)...
  [main] [2010-04-08 11:57:24.424 EST] [GETCRSHOMEUtil. < init >: 76] ToolName: getcrshome - tool rental: /u01/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: [Ljava.lang.String;@472d48
  [main] [2010-04-08 11:57:24.424 EST] [IsCmdScv [NativeSystem.isCmdScv:471]: cmd =]
  [main] [2010-04-08 11:57:24.424 EST] [RuntimeExec.runCommand:75] Runtime.exec () call with the command
  [main] [2010-04-08 11:57:24.425 EST] [RuntimeExec.runCommand:77] / bin/sh
  [main] [2010-04-08 11:57:24.426 EST] [RuntimeExec.runCommand:77] - c.
  [main] [2010-04-08 11:57:24.426 EST] /U01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome [RuntimeExec.runCommand:77]
  [Thread-4] [2010-04-08 11:57:24.439 EST] [StreamReader.run:61] In StreamReader.run
  [Thread-4] [2010-04-08 11:57:24.439 EST] [StreamReader.run:65] ERROR > / u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: permission denied
  [main] [2010-04-08 11:57:24.440 EST] [RuntimeExec.runCommand:142] RunCommand: wait for the process
  [main] [2010-04-08 11:57:24.440 EST] [RuntimeExec.runCommand:144] RunCommand: treat returns 127
  [Thread-3] [2010-04-08 11:57:24.440 EST] [StreamReader.run:61] In StreamReader.run
  [main] [2010-04-08 11:57:24.441 EST] [RuntimeExec.runCommand:161] RunTimeExec: output >
  [main] [2010-04-08 11:57:24.441 EST] [RuntimeExec.runCommand:170] RunTimeExec: error >
  [main] [2010-04-08 11:57:24.441 EST] /U01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome [RuntimeExec.runCommand:173]: error while loading shared libraries: libocrb11.so: cannot enable executable stack as shared object requires: permission denied
  [main] [2010-04-08 11:57:24.443 EST] [RuntimeExec.runCommand:192] Return of RunTimeExec.runCommand
  [main] [2010-04-08 11:57:24.443 EST] NativeSystem.runRemoteExecCmd [CmdToolUtil.doexecute:372] failed. Command = /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = env [] = null
  [main] [2010-04-08 11:57:24.444 EST] [HAUtils.isHASConfigured:349] Ignoring the exception in isHASConfigured: PRCT-1011: cannot run 'getcrshome '.
  [main] [2010-04-08 11:57:24.444 EST] Oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome (ClusterwareInfo.java:423) [HAUtils.isHASConfigured:350]
  oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
  oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
  oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
  oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1428)
  oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1450)
  oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1697)
  oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:169)
  oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
  oracle.net.ca.InitialSetup. < init > (NetCA.java:4159)
  oracle.net.ca.NetCA.main (NetCA.java:405)
  [main] [2010-04-08 11:57:24.444 EST] [ConfigureListener.isHASConfigured:1436] Is Oracle configured Restart: false
  [main] [2010-04-08 11:57:24.445 EST] [ConfigureListener.isHASRunning:1465] Is Oracle Restart running: false
  [main] [2010-04-08 11:57:24.445 EST] [ConfigureListener.typicalConfigure:201] Check free beach port: 1521-1540
  [main] [2010-04-08 11:57:24.445 EST] [ConfigureListener.isPortFree:1010] Check whether the port 1521 is free on the local computer.
  [main] [2010-04-08 11:57:24.446 EST] [ConfigureListener.isPortFree:1023] InetAddress.getByName (127.0.0.1): /127.0.0.1
  [main] [2010-04-08 11:57:24.446 EST] [ConfigureListener.isPortFree:1025] The local host IP address: fedora1/127.0.0.1
  [main] [2010-04-08 11:57:24.446 EST] [ConfigureListener.isPortFree:1027] Local host name: fedora1
  [main] [2010-04-08 11:57:24.447 EST] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port: 1521, IP address: fedora1/127.0.0.1
  [main] [2010-04-08 11:57:24.467 EST] [ConfigureListener.isPortFree:1042] ServerSocket created successfully.
  [main] [2010-04-08 11:57:24.468 EST] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port: 1521, IP address: fedora1 / 0:0:0:0:0:0:0:1
  [main] [2010-04-08 11:57:24.468 EST] [ConfigureListener.isPortFree:1042] ServerSocket created successfully.
  [main] [2010-04-08 11:57:24.468 EST] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port: 1521, local IP address: /127.0.0.1
  [main] [2010-04-08 11:57:24.469 EST] [ConfigureListener.isPortFree:1059] ServerSocket created successfully.
  [main] [2010-04-08 11:57:24.469 EST] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port: 1521
  [main] [2010-04-08 11:57:24.469 EST] [ConfigureListener.isPortFree:1068] ServerSocket created successfully.
  [main] [2010-04-08 11:57:24.469 EST] [ConfigureListener.isPortFree:1088] Back is free to Port 1521: true
  [main] [2010-04-08 11:57:24.470 EST] [ConfigureListener.typicalConfigure:208] Using the port: 1521
  [main] [2010-04-08 11:57:24.500 EST] [ConfigureListener.setListenerParam:1779] Parameter ADR_BASE_LISTENER: / u01/app/oracle
  [main] [2010-04-08 11:57:24.502 EST] [ConfigureListener.isPortFree:1010] Check whether the port 1521 is free on the local computer.
  [main] [2010-04-08 11:57:24.502 EST] [ConfigureListener.isPortFree:1023] InetAddress.getByName (127.0.0.1): /127.0.0.1
  [main] [2010-04-08 11:57:24.503 EST] [ConfigureListener.isPortFree:1025] The local host IP address: fedora1/127.0.0.1
  [main] [2010-04-08 11:57:24.503 EST] [ConfigureListener.isPortFree:1027] Local host name: fedora1
  [main] [2010-04-08 11:57:24.503 EST] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port: 1521, IP address: fedora1/127.0.0.1
  [main] [2010-04-08 11:57:24.504 EST] [ConfigureListener.isPortFree:1042] ServerSocket created successfully.
  [main] [2010-04-08 11:57:24.504 EST] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port: 1521, IP address: fedora1 / 0:0:0:0:0:0:0:1
  [main] [2010-04-08 11:57:24.504 EST] [ConfigureListener.isPortFree:1042] ServerSocket created successfully.
  [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port: 1521, local IP address: /127.0.0.1
  [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1059] ServerSocket created successfully.
  [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port: 1521
  [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1068] ServerSocket created successfully.
  [main] [2010-04-08 11:57:24.505 EST] [ConfigureListener.isPortFree:1088] Back is free to Port 1521: true
  [netca root@fedora1] #.

  I said that it was free. I would lie to you and the other thousands of people who visit these forums?

  All Linux, LINUX ALL, MUST be free.
  Support can be.
  Extensions are not.
  But Linux is free thanks to Mr. Torvalds.

  And Hans gave you the links. All you had to do is to click on one to find out.

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• Problem with the configuration of the time in the Protection of VMware 5.5.6 and timezone data

  1 Al VDP connect the following appears:

  "The last request was rejected by the POS device."

  refers to the NTP settings.

  There is a difference of 17 minutes.

  2. While the NTP definition for my region cannot add Chile ntp.shoa.cl

  3. I can't change the date and time manually with hwclock

  4. when change Yask time with me, the following message appears:

  "Cannot update the dynamic configuration strategy."

  Please need help with this problem.

  Solution:

  1. check the time zone and NTP ESX resident POS configuration.

  2 (virtual appliance VDP) # vmware-tools service restart

• Configuration of Symantec netbackup for VMware

  Hello

  I try to configure Netbackup 7.0 master server to take backup of all virtual machines. I use Fibrechannel EMC and vmware for VMware 4.0

  Environment.  Now, I want to take backup of the VM by Netbackup.   Please answer below the reference.

  1. do I need to present all LUNS to the Netbackup master server also take san free backup of Vmware.

  2. how it is possible to do the same thing without all of the LUNS to the master/Backup Server.

  3. I have 100 VM and how do I take the free agent complete vmbackup.

  Hello.

  1. do I need to present all LUNS to the Netbackup master server also take san free backup of Vmware.

  I guess you mean "LAN-free backup" above.  You must present LUNS to your NetBackup server, if you want backups without LAN.

  2. how it is possible to do the same thing without all of the LUNS to the master/Backup Server.

  In your strategy, choose something else than SAN for the "transfer type".

  3. I have 100 VM and how do I take the free agent complete vmbackup.

  Choose "Windows FlashBackup" for your type of strategy, and this will get the full virtual machine.

  I don't want the lunns to be present on any other server accept esx.

  Why, or what is the reason for this?  Your NetBackup on Windows servers?  Who has access to the backup servers?

  Can any body step by step document to configure windows backuphost(netbackup server) to take VMware lan free backup using the Vstorage API.

  Everything you need is in the "Symantec NetBackup (tm) 7.0 for VMware Guide"

  Good luck!

• Change according to the instructions of vmware tomcat http port, still gives error

  According to this doc, Centre of Documentation of vSphere 5.5 I should be able to change the tomcat port http.  But once I do, I see the errors below.  I guess there are other conf files to change, but I can't find those who.  I need to change the port to something else than my failure to support another agent of products I need on the vcenter server.

  
  

  Impossible to recover data on the health of https://localhost:443/VSM/health.XML

  Impossible to recover data on the health of https://localhost:443/EAM/eamService-Web/health.XML

  
  

  
  

  Thanks for the reply.  After working with support and troubleshooting a bit to mine, vmware help has found a workaround.

  I stopped the services of vcenter server and Web services.

  I changed the port 8082 to meet my needs in the bio line - vmssl.http.port = 8082 in the file C:\Program Files\VMware\Infrastructure\tomcat\conf\catalina.properties

  VMware support also noted this line in that same case, bio - vmssl.https.port = 8443

  We changed the 8443 port to meet my online " https://localhost:8443/eam/eamService-web/health.xml " present in the section configuration in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.eam\extension.xml

  We changed the 8443 port to meet my online " https://localhost:8443/vsm/health.xml " present in the section configuration in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.vsm\extension.xml

  I changed the port 8082 in line http://127.0.0.1:8082/vsm/ovfConsumer / in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.vsm\extension.xml

  I started the server vcenter and webservices.  Then I start the service in a conflict that also used the port 8081, I have since the change of port 8082 in my configuration of vcenter.  In my case, port 8081 used for communication of McAfee Agent throughout our whole environment.  After all this, no error is reported by the vcenter service monitor, and I can hit the URLS of health via a browser and get a valid answer.

• vCO 5.5 high availability / load balancer configuration

  I do a planning for a new deployment of vCO 5.5 and I would like to take advantage of the new features for high availability, but documentation seems to be a little lacking in Department of load balancer. I hope someone knows the answers to the following questions using zero in on possible configurations for load balancing options:

  Calls to instances of vCO they state or can I use a setting of type stateless round robin for the configuration of lb or what do I need to support sessions?

  Is there a health control end point which I can query the load balancer to automatically remove service instances in a configuration active / active failure? If there isn't a specific is a good audit can be done to create a service to act as a health check?

  Did he already works with a configuration similar and willing to share their experiences?

  Hello

  You can read the following article which explains how to configure Nginx as the load balancer. I hope it's useful.

  VMware KB: Nginx Configuration load lalancing software VMware vCenter Orchestrator 5.5

  Kind regards

  Radostin

• Generational UCS/VMWare

  Hello

  I'm looking for clarification on how the Palo VIC presents the vNIC, how say/control which card vNIC to which ports physical and how best to configure my environment for VMWare.

  Summary of material:

  Blades (full-width) B250 with 2 cards of Palo VIC

  5108 chassis with double FEX (double uplinks from each FEX)

  2 x 6120 controllers with 2 x 10 Gbit links rising each to a pair of Nexus s 5020

  Summary of the software:

  UCS 1.3.0 boot loader, the kernel/system 4.1 version (3) N2(1.2d)

  VMWare vSphere Enterprise Plus 4.1

  According to my interpretation, Cisco and VMWare recommend against bandwidth limiting the interfaces - but prefer to go with actions and ability to burst.

  Therefore, my desired construction is the following:

  for each of the 4 available in B250 blade 10gbit interfaces, I want to have 2 vNIC (1 for VM distributed vSwitch [6Gbit minimum actions, 802. 1 q trunks], 1 for iSCSI [4 Gbit minimum actions, access port/no 802. 1 q trunk]). This means that my Service profile must define 8 vNIC altogether.

  Q1: How can I make sure that I get 1 'data' and 1 'iscsi' vNIC per physical port?

  Q2: how to set a policy to set the minimum bandwidth on each vNIC?

  Q3: How do I control/make sure the binding order correct so that I can script my configuration of vSphere?

  Generation of VMWare will be vswitch distributed containing all the 'data' vNIC, allowing control of network IO with actions defined to manage the various allowances for groups of data ports, console and VMotion. The vNIC iSCSI will each receive a VMKernel port dedicated.

  Thank you very much in advance for any help.

  Our installation program is not the same, but the principles can be applied as we also CIV.  To make sure that we had the installation of ports properly, I put into service six vNIC in UCSM to each host.  I put in service the first vNIC of fabric and the second vNIC fabric B - do not check the box "Fabric Failover"...  Repeat for other network cards for four.  This will give you 4 vNIC by fabric.  Note MAC addresses and which tissue they are attached.

  Then, in case of VC and to configure your hosts, enter the network cards and line up the vmnic and MAC addresses so that you know how they trace.  When you configure your vSwitches, just make sure you add a vmnic from fabric and a fabric vmnic B.    Do this for the Service Console, vmkernel and VM switches.

  If you make this unique environment of VIC inas, it will ensure that your vswitches are attached to every tissue.  I guess you can do this same thing with two VICs, since each card may appear independently in UCSM.

  As for the bandwidth mgmt and others, check out http://bradhedlund.com/ its recent messages are on the networks of the UCS.

  Adam

• How to strengthen the failure on jobs of the Disqualification

  We execute the Disqualification autosys scheduler jobs (ksh shell script called CLI command) and have the following conditions:

  1. do not the autosys job each time that there is a problem in the execution of the task of the Disqualification (i.e. the Disqualification job failed because of blocking problem)

  2. do not work autosys whenever at least a save fails in the processor business rules

  Currently, the shell script returns a 0 return code (success) on both scenarios.

  Can you advice how Disqualification jobs can be configured to trigger failure to the caller?

  Yes the bug has been checked on 12.2.1. It is the version, and not specific o/s. The bug does not exist in previous versions. We are working on a fix for the fix.

• "Configuration of the Windows updates failed. Restoration of the changes

  Configuration of the failure of the updates are happening all the time and takes a long time to restore updates. Please tell us how can I prevent automatic updates.

  To avoid failure, follow these steps:

  "Configuration of the Windows updates failed. Restoration of the changes