Configuration of router Hub Tunnel Virtual Interface (VTI)

Similar Questions

• [SOLVED] Error 404 Google + card Tunnel Teredo Tunneling Pseudo-Interface disabled in NetBIOS over TCP/IP

  I realize that it is a long title.  It could be useful describe my problem.

  Recently, I downloaded something (not sure if I can't talk about website) and with download received 4 bad files found by Malwarebytes named: PUP. OfferBundle and PUP. ToolbarDownload.  These 4 files were quarantined and then removed, but this does not solve my problem.  I ran Microsoft and other spyware, but nothing more has been discovered.

  I have Norton Internet Security, which extends constantly and I always have these terrible files.

  I can not access Google search engine.  I get this message: error 404 (not FOUND)! 1

  The address bar reads: cgi-bin/redirect.ha.  I have another computer and am able to access Google since the router same use so I know there are still a few malware rootkit on my computer which may be connected to the Teredo Tunneling adapter, I don't understand.

  I'm not sure how to solve this problem.  I don't know where watch, but ran many scans of data collection.  Here is a part of a single test showing wireless and LAN configurations:

  Windows IP configuration

  Name of the host...: StrikingEagle-HP

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: att.net

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 20-10-7A-1C-AF-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : att.net

  Description...: Realtek RTL8188CE 802.11b/g/n WiFi adapt

  Physical address.... : 20-10-7A-1C-AF-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2602:306:cdb8:5300:b5fc:b411:6df0:e722 (Preferred)

  Temporary IPv6 address...: 2602:306:cdb8:5300:b9d4:2772:d89a:3a5f (Preferred)

  Address IPv6 local link...: fe80::b5fc:b411:6df0:e722% 13 (Preferred)

  IPv4 address...: 192.168.1.73 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, April 22, 2012 23:29:35

  End of the lease...: Monday, April 23, 2012 23:29:34

  ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 13

  192.168.1.254

  DHCP server...: 192.168.1.254

  DHCPv6 IOOKING...: 320868474

  DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

  DNS servers...: 192.168.1.254

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : att.net

  Description...: Realtek PCIe GBE Family Controller

  Physical address.... : 2C-41-38-5C-76-B6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2602:306:cdb8:5300:584d:2ddf:6 a 08: f6a7 (Preferred)

  Temporary IPv6 address...: 2602:306:cdb8:5300:575:56e9:298d:9097 (Preferred)

  Address IPv6 local link...: fe80::584d:2ddf:6 a 08: f6a7% 11 (Preferred)

  IPv4 address: 192.168.1.71 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, April 22, 2012 23:29:32

  End of the lease...: Monday, April 23, 2012 23:29:32

  ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 11

  192.168.1.254

  DHCP server...: 192.168.1.254

  DHCPv6 IOOKING...: 237781304

  DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

  DNS servers...: 192.168.1.254

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {38655146-6231-4777-AB1C-2DC12E0017FD}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft 6to4 card

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter ISATAP.att.NET:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : att.net

  ... Description: Adapter Microsoft ISATAP #2

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:2413:2ee1:3f57:feb8 (Preferred)

  Address IPv6 local link...: fe80::2413:2ee1:3f57:feb8% 14 (Preferred)

  ... Default gateway. :

  NetBIOS over TCP/IP...: disabled

  Server: dsldevice.att.net

  Address: 192.168.1.254

  Name: google.com

  Address: 74.125.227.40

  74.125.227.41

  74.125.227.46

  74.125.227.32

  74.125.227.33

  74.125.227.34

  74.125.227.35

  74.125.227.36

  74.125.227.37

  74.125.227.38

  74.125.227.39

  Please note the last entry.  DHCP is not enabled.  NetBIOS over TCP/IP is disabled.  Now, it's for the Tunnel Teredo Tunneling Pseudo-Interface AND Google map is registered immediately thereafter with a list of IP addresses.

  Would be - why I can't access Google?  How can I fix it?  How can I activate this card Tunnel?  I want to do this?  I did a ping for the Tunnel of the card test and it seemed to work OK.  How do I know if card Tunnel is really on?   Why is the Tcpip BIOS

  people with disabilities in the last list of IP and not on others?  Why are all those Google IP addresses listed?

  Any help is greatly appreciated.  I'm very stuck.  Thank you.

  Edit = Edit

  has run another scan: MicrosoftSecurity Agent (I think) that produced a VERY long report, CBS.  There are a lot of mistakes in this report, and I don't know which ones were repaired my Microsoft or if errors are related to my problem.  Here are some of the errors.  All t errors are repeated throughout the report. I hope this info is helpful:

  2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

  0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

  0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:07, CBS Session info: 30218206_2956451109 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:07, info CBS doesn't have the package opened internally. [HRESULT = 0X800F0805 - CBS_E_INVALID_PACKAGE]

  2012-04-11 11:20:30, CBS M² info: could not start the download with pattern file: C:\Windows\servicing\sqm\*_std.sqm, flags: 0 x 2 [HRESULT = 0 x E_FAIL 80004005]

  Hello
   
   
  We are pleased to know that the problem is solved.
  We know in the future if you have problems with Microsoft Windows.

• Configure the router linksys on windows vista

  Recently I bought a linksys wireless router and have problems when configuring it on windows vista home.

  I have read many articles that while configuration that I need to connect the DSL modem (DSL in my case) to the router (WAN port) and also a thread more (that came with the router) to the laptop. If I connect my laptop with router then how is the wireless network or if it is required to do the installation?
  Do I need a PC/laptop always connected with wireless router and then only I can take advantage of being wireless (I hope not)? When can I disconnect the cable between the router and the laptop and use internet as well?

  The reason for asking this question, is that my laptop LAN port is not functional. If I use any other laptop for the initial setup and then use my laptop to connect to the router if it works without using b & w computer laptop and router connection?

  I'm really a beginner for this please help.

  Thank you

  Hi, thanks for your answers.

  I had a temporary cell phone to set up my wireless router. The question I m is that I can access internet from my lan from the dsl model cable but I can't access the internet when I connect the LAN to my wireless router and a join cable wireless router to my laptop.

  While the configuration of the wireless router from the cd that I got with router reached the last step to find the internet connection and then pop up msg this router is not able to find the internet connection. What should I do?

  I just saw a thread (http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&thread.id=58742&view=by_date_ascending&page=2) and cloned my mac but coldnt able address to make it work.

  I'll post my ipconfig details in a moment.

  C:\Users\Chakrapani V>ipconfig /all
  
  Windows IP Configuration
  
     Host Name . . . . . . . . . . . . : ChakrapaniV   Primary Dns Suffix  . . . . . . . :   Node Type . . . . . . . . . . . . : Hybrid   IP Routing Enabled. . . . . . . . : No   WINS Proxy Enabled. . . . . . . . : No
  
  Ethernet adapter Local Area Connection:
  
     Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller   Physical Address. . . . . . . . . : 00-21-9B-F1-26-C4   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : Yes   Link-local IPv6 Address . . . . . : fe80::71d3:2386:391a:3d9a%11(Preferred)   IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)   Subnet Mask . . . . . . . . . . . : 255.255.255.0   Lease Obtained. . . . . . . . . . : 22 October 2009 07:24:15   Lease Expires . . . . . . . . . . : 23 October 2009 07:24:15   Default Gateway . . . . . . . . . : 192.168.1.1   DHCP Server . . . . . . . . . . . : 192.168.1.1   DNS Servers . . . . . . . . . . . : 192.168.1.1   NetBIOS over Tcpip. . . . . . . . : Enabled
  
  Tunnel adapter Local Area Connection* 6:
  
     Media State . . . . . . . . . . . : Media disconnected   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : isatap.{314241DB-C984-4A60-A127-7D9246A8A709}   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0   DHCP Enabled. . . . . . . . . . . : No   Autoconfiguration Enabled . . . . : Yes
  
  Tunnel adapter Local Area Connection* 7:
  
     Media State . . . . . . . . . . . : Media disconnected   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface   Physical Address. . . . . . . . . : 02-00-54-55-4E-01   DHCP Enabled. . . . . . . . . . . : No   Autoconfiguration Enabled . . . . : Yes
  
  Tunnel adapter Local Area Connection* 17:
  
     Media State . . . . . . . . . . . : Media disconnected   Connection-specific DNS Suffix  . :   Description . . . . . . . . . . . : isatap.{A1DE9DAE-229D-4929-A91E-F208BB0DCA22}   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0   DHCP Enabled. . . . . . . . . . . : No   Autoconfiguration Enabled . . . . : Yes
  

• Not available in the configuration of the adapter VMNet8 virtual network

  Hi all

  I have HAD the following config:

  Virtual Server 2 on a machine with a physical NIC XP

  Two comments machines two Ent W2K3 running.

  IP address 192.168.1.1 and 2.1 default gateway of 192.168.1.5

  Both machines network cards configured to use VMNET8. VMNET 8 configured through the virtual network with IP 192.168.1.5 Editor

  The virtual card configured VMNET8 with 192.168.1.5 address in the host network configuration and the default gateway set as 192.168.0.254, that is the address of the gateway for my network home.

  With this config, I have had my two virtual on the same network and "Native" computers to the internet via my home network.

  Problem now is that somehow my journey becomes stripped on the host. The NIC VMNET8 achieved somehow a metric is lower than the physical host adapter. No problem when accessing the net from virtual methods, but when you try to access the net from the host machine, it attempts to route the internet traffic on the virtual interface on VMNET8 and of course fails.

  In addition, the possibility to connect the virtual machines to VMNET8 is not an option in NIC on each virtual machine settings more. I only have NAT, connected by a bridge and host-only.

  I spent some time on the issue without success so I uninstalled VMware and removed two virtual machines. After you have reinstalled, I am always presented with the same two questions.

  Does anyone have an suggestions?

  Kind regards

  Hamish.

  Welcome to the forums!

  I would say to keep the values by default as long as you have a good reason to change.

  Configure:

  I guess 192.168.1.0/24 is your address for VMnet8 network!

  The adapter VMnet8 host to:

  no gateway 192.168.1.1 by default, it is not necessary here.

  Comments:

  Either DHCP (served by the DHCP of VMware Server) or fixed IP 192.168.1. < starting="" with="" 10=""> , DNS, default gateway: 192.168.1.2
  If you use the VMware DHCP server control if 192.168.1.0/24 is configured as network VMnet8 address.

  Do not connect to the vNIC to VMnet8, choose 'NAT', which is VMnet8.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• Could not load the driver for Teredo Tunneling Pseudo-Interface

  Hello

  Does anyone know how to fix this problem (Vista) Business

  Product
  Teredo Tunneling Pseudo-Interface

  Problem
  Could not load driver software

  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: * TUNMP
  Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 0000000-a
  Driver name: tunmp.sys
  Driver version: 6.0.6000.16386
  Driver date: 02/11/2006
  OS version: 6.0.6000.2.0.0.256.6
  Locale ID: 2057

  Additional information about the problem
  Bucket ID: 12121968

  Concerning
  Dave

  Hi Dave

  Can you please give us more information on your laptop and what is happening exactly?

• Configure L3 routing with different suppliers

  Hello people, I am not used to work with layer 3 switches, so I need your help:  I have two different sites. Each site has one switch L3 and  networks like the example below:
  
  Switch A (power connect 6224):Network 192.168.0.0 /24
  
  Switch B (Cisco 3560)Network 172.19.16.0 /24network 10.10.10.0 /24
  
  I need to configure both sites to comunicate witch each other. I have the following idea:
  
  - Connect a Cable between two switches- Create a vlan on each switch and configure the ips like below:Switch A: interface ethernet 1/g1 - 10.0.0.2Switch B: interface gigabit 1 - 10.0.0.3- Configure static route on each switch like:Switch A: ip route 172.19.16.0 255.255.255.0 10.0.0.3     ip route 10.10.10.0 255.255.255.0 10.0.0.3Switch B: ip route 192.168.0.0 255.255.255.0 10.0.0.2
  
  Is this possible? Is this configuratios right? If so, do I need to improve something else?
  
  A appreciate any help.
  

  The decisive factor here is going to be if the PowerConnect and Cisco have different Broadcast domains from each other. If they have a separate broadcast domain, then the method you mentioned should work fine. If they share broadcast domains, then you want the physical connection to the two switches in general or Trunk mode, allowing the VLANS on the connection.

• Maximum virtual interfaces (VLANS) FWSM latest version

  Hello

  Please someone (perhaps cisco) can tell me for the FWSM for the latest 3.x version that corresponds to the maximum number of virtual interfaces (VLANS)?

  Best regards.

  It depends on the firewall mode, but I think that most of the time, the limit of vlan is related to the routed mode.

  Refer to this VLAN 3.1 FWSM features/limit:

  http://www.Cisco.com/en/us/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a0080577c68.html#wp1052995

  HTH

  AK

• How can I configure my router to a new modem?

  I changed my internet provider and I have a new modem. How can I configure my router to work with my modem?

  Hi @Belem,

  You can check out the link below and see if it helps.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/22697

  Kind regards

  Dexter

  The community team

• TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

  My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

  Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

  As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

  I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

  This left me confused.  If there is a problem with this device, no solution seems to exist.

  Any help that will allow my laptop to function normally is welcome.

  I understand that you want to know if the teredo adapter can cause performance problems.

  The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

  This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

  If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

  Furthermore, does this happen that the adapter is connected or not?

• Problem with the HP 430 (bluetooth and teredo tunneling Pseudo-Interface) drivers

  Hello

  recently my bluetooth function cannot to connect to other devices... This is what happens to the Device Manager:

  

  What is teredo tunneling pseudo-interface is for? is it important?
  If so, how to solve this problem?
  How to solve the problem of the bluetooth?

  Generic Bluetooth adapter:
  USB\VID_03F0 & PID_311D & REV_0001
  USB\VID_03F0 & PID_311D

  Teredo tunneling pseudo-Interface:

  * TEREDO

  Go to Device Manager, right click on the device and select Update driver. Path to the .inf file that you downloaded for use.

• Teredo tunneling Pseudo-Interface desintaler

  Teredo tunneling Pseudo-Interface uninstall how to reinstall

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)

  Original title: code10microsoft toledo tunnelling

  We think we've found a driver but we are not sure because he vomits again code.10

  Hello

  1. don't you make changes to your computer before this problem started?

  2. What is the brand and model number?

  If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)

  You can try the following steps and check if that helps you solve the problem.

  Method 1:

  Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.

  a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).

  b. Type "netsh" and ENTER.

  c. Type "int teredo" and ENTER

  d. type 'set disabled state' and ENTER.

  e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".

  f. Open command with administrator credentials prompt once more.

  g. type netsh + ENTER.

  h. Type "int ipv6" + ENTRY

  i. type 'set teredo client' + ENTRY

  j open the Device Manager and the analysis of new hardware.

  k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.

  Method 2:

  If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.

  Follow the steps below to uninstall and reinstall the network card.

  a. click on start

  b. in the type of search box of start of "devmgmt.msc" and press enter

  (c) in Device Manager, expand network adapters

  d. right-click on the network adapter and uninstall.

  e. restart the computer, and then reinstall the network card.

  Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

  I hope this helps.

• Teredo Tunneling Pseudo-Interface

  In my view, that it is a Trojan horse virus. I updated my computer security, Microsoft Security Essentials both Trend Micro Internet security. None of them was able to remove this from my system cards. I even had to put a wireless adapter on my computer because when I tried to connect for updates when you use an Ethernet cable, it could block the updates. anyone with this problem let me know how you got rid of him. Thanks, Ron

  Hello RonBowen,

  Thanks for your post.  It is not a virus, it is also a part of the Windows operating system.  I understood as well a link that contains information to repair the adapter and a link to turn it off if you want.  Please see:

  How to repair Teredo Tunneling pseudo-interface 6to4 adapt

  How to disable Teredo Tunneling pseudo-interface 6to4 adapt

  I hope this helps.

  See you soon

• Need help Configureing Netgear router so I can connect to Playstation Network.

  My playstation 3 says "Failure of Type NAT" and will not sign into the playstation network. I have a router Netgrear that connect PS3 to Internet, but times out when you try to connect to the PS network. How can I configure the router? I use a wired connection.

  Hello

  I suggest you to contact the manufacturer of the playstation for assistance on this issue.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

  I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
  I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.

  Hello

   
   
  1. What is the code that you see under the status of the device and the exact error message?
  2 have you made changes on the computer before this problem?
  As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
  Step 1: first of all, I would say you temporarily disable any security software and then try to install.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Step 2: Now try to install the drivers
  a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. identify the sound card, right-click on it and select Properties .
  c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
  Restart the computer and install the latest driver.
  Reference: Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  Get help with Device Manager errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
  Overview of Teredo

  http://TechNet.Microsoft.com/en-us/network/cc917486.aspx