Need help Configureing Netgear router so I can connect to Playstation Network.

Similar Questions

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Need help installing BEFSR41 router

  Hello

  I need some help configure a router BEFSR41, that I bought recently.  A year ago, I got a WRT54GS router and was able to set it up to my Siemens modem DSL 4100 b without any problem.  (Maybe I was just lucky before when I set up the wireless router)  Now I have misery BEFSR41 to work.  I tried to replace my BEFSR41 in the same position as my WRT54GS by using the same configuration.  I'm reproducing the setting on my WRT54GS BEFSR41 router to the wired connection. I took the "Automatic Configuration - DHCP" on my WRT54GS, so on the BEFSR41, I choose "obtain an IP address automatically".  I also activate local DHCP server from 192.168.1.100.  This should configure the BEFSR41 as WRT54GS, right?  But I couldn't get on the internet using BEFSR41 with this configuration.

  I checked the routing table for the two router see if it makes a difference and noticed that the only thing different is that the routing table for BEFSR41, the fields of the gateway is 0.0.0.0, but they have correct values on my WRT54GS.

  Another difference between the two routers is that on the screen of my WRT54GS State, he showed entry 192.168.0.1 DNS1 and DNS2 and DNS3 entries are empty.  On the State of BEFSR41 screen, it showed DNS1 as 192.168.0.1, then he repeats DNS1 as 192.168.0.1, and finally another DNS1 entry is empty.  How important is it that on the status of the BEFSR41 display, is to show field DNS1 3 times? (instead of DNS3 DNS1, DNS2)

  Thanks in advance for any help.

  I suspect that the reason the 4100 and the BEFSR41 do not play well together is that both of them use the proxy DNS servers.  DNS proxy on the BEFSR41 servers run 192.168.1.1 and the DNS proxy on the 4100 servers run 192.168.0.1.   My bet is that "double proxy servers" are simply not passing addresses correctly.

  As to why the 4100 b works with your old router, but not with your most recent router, I'm not sure.  Is your 4100 several years old?  Often old modems work with older routers, but not with the newer routers.

  I think that it is best to place your 4100 b in Bridge mode.  It would like to convert it to a real modem.  It therefore would not have an IP address, or make your PPPoE connection.  This would be "Not used PPPoE" (on the modem).

  Your BEFSR41 would have to be configured to your PPPoE connection.

• I need to configure my router once I format my OS is Windows 7?

  I need to configure my router once I format my OS is Windows 7? Thank you! -EIB

  Original title: Windows 7.

  It is not necessary. If you use the WiFi for connectivity, you must type the password, if security is enabled, connecting the first time after reinstalling Windows.

• Satellite A200 - can connect to the network (LAN & WLAN) but no Internet

  Hi all

  I have a problem very annoying and confusing.

  I've just set up my internet connection at home. From the beginning, my Toshiba was unable to properly communicate with the router to set up the connection, I had to use Mac. my partner

  After much time spent talking with the ISP and the manufacturer of the router, I was told that there is a problem with my network card - it is not compatible with the router. I don't think that this is the case, my laptop is fairly new, newer than the router actually. So, it seems a logical explanation. As this laptop was able to connect to every other internet connection as needed. And more importantly, my phone can communicate with the router as I can connect 'local only' but not to the internet. I get an error that can not diagnose Vista.

  Device Manager shows that my wireless and ethernet devices are working properly.

  My network settings are also on the parameters required by the router.

  I'm at a loss total, and personal support from my ISP and DLINK (manufacturer of the router). Any help / advice would be GREATLY appreciated!

  Thank you

  Edward

  Hello, Edward

  This explanation of compatibility is for me nothing else good joke. I use PC Toshiba laptop for years and none of them has a few special network adapter.

  Can you please as first step test the functionality of connecting your laptop to another router? Maybe some friend of you can help.
  When you connect your laptop using the cable LAN is green LED on ONE LAN port?
  You see a flashing orange?

  Do you have access to the settings of the router using internet explore on your Satellite A200?

• can connect to the network but not internet XP

  I use a computer on a local network xp, can connect to the network, ping the DNS server, gateway, etc.  However, I can't not conncet to internet.  When I ping a web address using the address of the site name or xxx.xxx.x.xx I have no success.  Tried to reset winsock, tcp/ip, without success.  Would appreciate any help.

  First course of action:

  1. turn off the PC.

  2. turn off the router.

  3. turn on the router.

  4. turn on the PC.

• I can connect to my network, but with access "local only".

  Access to the "Local" network only
  I can connect to my network, but with access "local only".  Internet became more intermittent (not sure if that is related or if I guess it) and did not work in several weeks.  Desktop computer is plugged into the router, but have the same problem when it is plugged into the DSL modem.  Other computers on the same router (wireless or other) work very well.  Recently, I removed Mcaffee and installed MS security essentials.  I uninstalled mcaffee of programs and settings then used the mcaffee removal tool to lighten the rest.  I uninstalled and reinstalled MS security essentials.  I thought it might be a firewall issue, but I get error 0x6D9 when I try to start it.  I tried all the steps in the following post, nothing helps.  Any other suggestions?

  ______________________

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  ________________

  Thanks for any help!

  Hello

  All changes to the software or hardware of the computer?

  Method 1:

  Visit the link below and follow the steps.

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

  Method 2:

  Update the NIC drivers and check.

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• can connect my playstation 2 to my pc, so far I have sound but no visual on my monitor

  can connect my playstation 2 to my pc, so far I have sound but no visual on my monitor

  Hello

  You can post the question on the Playstation to support help forums:
  
  http://community.us.PlayStation.com/T5/PlayStation-2/BD-p/22013

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• Need help configuration IOS IPsec to enable communication between the VPN client

  Hi, I need help with the configuration of IPsec VPN router 2811. I want to allow communication between VPN clients, is that possible? I know that ASA, you can do this by using the command "permit same-security-traffic intra-interface".

  The fact is that each Client IP communicator installed, but when they tried to call each other, he failed. I guess that's because the connectivity between them is not permitted because of the VPN connection.

  Thanks in advance...

  Hello

  Try this: -.

  local pool IP 192.168.1.1 ippool 192.168.1.5

  access-list 1 permit host 192.168.1.2< vpn="" ip="" addr="" of="" client="">

  access-list 1 permit host 192.168.1.3< vpn="" ip="" addr="" of="" client="">

  access-list 1 permit 10.10.10.0 0.0.0.255

  < lan="" behind="" the="">

  ISAKMP crypto client configuration group vpnclient

  key cisco123

  ACL 1< binding="" the="" acl="">

  !

  --------Done-------------

  If you do NAT on the router then you might want to exempt your VPN traffic to be NAt had

  Assuming that the NAT of your router is

  overload of IP nat inside source list 111 interface FastEthernet1/0

  !

  ! - The access list is used to specify which traffic

  ! - must be translated to the outside Internet.

  access-list 111 deny ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

  Above two statements are exempt from nat traffic.

  access-list 111 allow ip 10.10.10.0 0.0.0.255 any<, permits="">

  I would like to know if it worked for you.

  Concerning

  M

• Need help - &#62; configuration of windows 2008 Server

  Hi I need help. I have the subject of a project that I do for my final school certificate and I need enything on windows 2008 Server Configuration / Costomizing. I hope you can help me

  Thank you!

  OB

  Server questions should be asked on the Technet site

  http://social.technet.Microsoft.com/forums/en-us/home

• Need help with my video! Rhapsody can't find my Clip.

  I tried to reinstall the Rhapsody software and formatting my Clip and those which do not solve my problem.  I plug my video on usb and I find the clip in 'my computer '.  I opened Rhapsody with the Clip into the usb port, and the Clip does not appear in sources more.  The Clip used to work 100% good, but no more.  I cancelled the forceps to try to resolve the problem.  So the real problem is that I cancelled the clamp to fix the problem and now I can not find out how to get the Clip appears again in Rhapsody.  Under 'my account' Rhapsody says "no authorized device.  So I need help to get my Clip is displayed in 'my devices allowed' so that I can reactive it.  Any ideas?  I run Vista and also tried to run Rhapsody as an administrator.  Thank you!

  A few simple steps should get your device to communicate in MTP mode again.  It is the most common source of problems with Rhapsody.

  First of all, verify that Rhapsody is running correctly.  Open the 4 Rhapsody client and login.  Select a piece of music in the music guide and see if it reads normally.

  Connect the clamp and take a look at the sources of pand in the upper left corner.  How the Clip appears?

  If it lists as E: SANSA CLIP all in capital letters, with a drive letter, the device is in MSC mode and cannot accept Rhapsody subscription titles.  It can accept purchased securities, that they contain no DRM as MP3 files.  Unplug the unit and switch to MTP mode manually:

  Settings > USB Mode > MTP.

  If the device appears as a Sansa Clip 4 GB for example, with caps and smalls, without a drive letter, Windows recognizes the device as a media device.

  If Rhapsody sees the devivce as shown above, try to right click on the device and select allow.  Transfers should be possible.

  If it does not appear as a MTP device, leave the connected device (after manually select MTP mode) and go to the Device Manager.  [Windows key] + [pause button], then Hardware tab > Device Manager.

  Look for the yellow triangle.  The Clip appears in the portable device, or Bus USB controllers tree.  Select Uninstall (not turn off!), unplug, restart the computer and after it restarts, try to connect again from the PSG.

  Bob

• How can I determine the MACaddress of the Gen 4 Apple TV so that I can connect to my network. Must register on the router MAC address to connect to the internet.

  Security on my network requires that the MAC address of the device must be registered on router or I can't connect to the internet. Does not use a password based security configuration. How to find MAC address before the introduction of Apple TV?

  Contact your ISP

• Need help to determine what caused several outbound connections domain workstation

  Need help to determine why my workstation area all of a sudden (in the last 4 days) seems to be launching many connections coming out of remote addresses of dllhost.exe.

  So far, I scanned the machine in safe mode with Malwarebytes, Malwarebytes Antirootkit, Superantispyware, Rootkit Remover (McAfee) and various other applications of identification or remove malware without success. The machine seems to be clean of malware.

  I use Sysinternals Process Explorer to view the file in question, but I can't determine how it is running. The file at the bottom of the screenshot below is the file in question. I've suspended in this shot, or there could be dozens of dllhost.exe initialized below the first.

  Using tcpview from Sysinternals shows that the process to connect to several remote IP addresses which, in many cases, are not identifiable via whois (or I do something wrong, which is quite possible).

  Is it possible to determine what triggers the executable which, in turn, seems to be calling outbound connections?

  

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home