Configuration wireless router 891w

Similar Questions

• Configuration wireless router WRT54G without CD - problems with manual installation

  Hello.  I have a WRT54G Router that I've used over the years, because my former cable provider provided me with the router.  I recently switched to cable operators & they do not provide a wireless routers.  I would use my WRT54G Router, but I don't have the cd.  I thought that it wasn't a problem because I can just do a manual installation using the 192.168.1.1 ip address.  I get the pop up window to enter user name & password.  I followed the instructions & just type in the word admin password field & l left the user name empty, but it does not work.  Can someone please?  I know that I can solve this problem.  It is not sensible to spend money for another router when this can be a simple solution.  Thanks in advance for your help.

  Press and hold the reset on the back for 30 seconds and then release.  Wait 10 seconds and power cycle.  Now, try again.

• the wpa security password configured on my hp printer does not match my wireless router setup

  the wpa security password configured on my hp printer does not match my wireless router

  You will need to go to the menu on the printer control panel and then go to the section wireless/network to change. Sorry for the general response, but without specific identification of your printer I can't advise you with precisely where in the menu to go.

  Thanks for posting the p/n. look on the lower back/side/tray of your printer.

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.

  Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.  I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor

  Hello

  HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.

  This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1

  If you can't make it work, you must decide between a new card or another router.

  Personally, if it's new and I could return it, I'd get a different router model. But YMMV

  ------------

  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Mac Lion will not configure Deskjet 3050 a to the wireless router. Have installed software HP 3 times.

  My Deskjet 3050 series J611j was ooriginally configured with Mac OS Snow Leopard. I have since installed Lion (10.7.3). I inadvertently reset the default printer and it stopped connecting with the wireless router.  I installed the new software HP Lion but when I go through the installation, after that I tell the printer to connect to the router, I get a message saying that the device is not connected to the computer and connect with a USB connection. But it is connected with a USB cable.

  I fixed it by pulling on an old PC and launch the CD. Who got up the printer on the wireless. from there, I could finish and connect with the Mac.  Thank you.

• How to re - configure a Linksys E1200 wireless router after that I got a new Modem

  I just got a new modem.  My E1200 Linksys wireless router no longer works.  Technical support said it should be redefined to work with the router.  How do I do that?  Thank you

  Hi, feibelal ! You don't need to have an active Internet connection on your Mac to be able to access the user interface of the router E1200. The steps in the link provided by Thaddeus_A should do your router works.

  Kind regards

  Ethel_10700

  Linksys technical support

• I need to know how to configure the security settings for my laptop secured with a wireless router & domestic printer on a network in an apt building

  I live in an apartment bldg & want to know if my phone is secured with a wireless router & domestic implementation of a network. I have a laptop HP under Win 7 pro, a desktop computer using XP, & a wireless Canon printer? I use Microsoft Security Essentials for security. Can you tell me the right settings to ensure the safety of my business? And if I use the 'Public' library in documents others may see them outside my home network?

  Hi Tere,

  You can see this Microsoft article to strengthen the security of your computer and your network.

   

  Make your network more secure

  http://Windows.Microsoft.com/en-in/Windows7/making-your-network-more-secure

   

  Personal information and files on your wireless network can sometimes be seen by people to pick up the signal from your network. This can lead to identity theft and other acts of violence. A network security key or password can help protect your network against this type of unauthorized access wireless. Refer to this article for more information:

  Set up a security key for a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-security-key-for-a-wireless-network

  Public folders are a convenient way to share files on your computer. You can share files in the public folders with other people using the same computer and with people using other computers on your network. Any file or folder you put in a folder Public is automatically shared with the people who have access to your public folders.

  Share files via public folders

  http://Windows.Microsoft.com/en-in/Windows7/share-files-using-the-public-folders

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Wireless router is disconnected from the PC (s) during the use of Firefox 37.0.1

  This problem occurred for the last 2 weeks whenever I use Firefox on each of the 2 PC's I use it every day. The problem may occur a few minutes after the start of Firefox, or it may be hours of continuous use before the connection is lost. It's okay if I'm in Firefox by itself or have the background applications running, but without a doubt requires Firefox runs before I see a problem.

  Configuration: WIN 8.1 and VISTA 64. the two latest updates.
  LAN: cable modem and Belkin wireless router; together with the latest firmware.
  Firefox v37.0.1 without add-ins or modules. Start page is 'empty '.

  Symptoms:
  Status bar Windows shows that I'm disconnected from the router.
  Router and the modem status LED shows that I am connected to the internet. Same thing for the VICTORY of the network status app. It shows no connection to router.

  The problem can be temporarily fixed by power cycling the router. Or, in the meantime just a random delay the connection may (or may not) be restored on its own.

  I also use a standalone PC application that streams the text given in short bursts and runs all day (no video or music... just short lines of text) with no problems until I launch Firefox in the background. Then he can go a few hours before the connection to the router is lost. I also often watch videos on my Tablet without the router problems. While typing in this issue on a PC I was disconnected from my router. I'm hoping to get some suggestions as to what to inspect or modify. Thank you!

  Fred, I had to leave the House early this morning and had no time to dig a cable long enough to reach my modem to try your suggestion. But, what I did was half of your suggestion. I pushed the reset bit recessed on the modem and left the House around 08:30 with Firefox running on both computers. Seven hours later everything is normal. No router disconnects and I gave a very good workout system.

  I have also now initial notice that connects to the web sites are faster.

  It is obviously a logical explanation for what was going on, but to an outside observer (), I see absolutely no logical link to the 'solution' for the rest of the universe. I won't lose sleep on. And I'm going to ask you more specifically when the next puzzle problem occurs! Thank you, Fred!

• My 6270Z requires a USB adapter in more a wireless router?

  Get an ereader and want to configure wifi. Get a wireless router, but don't know if I need a USB adapter also.

  doc78 wrote: Kindle Touch

  Hello doc78, I checked out the Kindle Touch and the show of specifications:

  Wi - Built-in Fi:
  Connect to Wi - Fi hotspots at home or on the go. Includes free access to Wi - Fi hotspots AT & T through the United States.

  The specifications did not show the version of the wireless device. It could be the published versions to date, version A, B, G or N.

  As you have found a new wireless router, I suggest to get the N version, since it is the most recent and sends and receives a greater distance and speed than the versions A, B and G.

  The Kindle Touch maybe not the wireless version N device, but would still be retro-compatible with the version N router, but only at speeds of wireless Kindle Touch device.

  Router purchase N version assure you that you have later, right now, for future updates wireless.

• do I need a wireless router to print Jet Office 6700

  I'm working on site with no internet connection, I need a wireless router to print Jet Office 6700? I don't have a USB cable.

  Hello

  You get two options: using direct wireless (which isn't reliable) to buy a USB cable for about 10 euros. If you want to use direct wireless, use the following configuration:

  http://support.HP.com/us-en/document/c03353355

  Kind regards.

• A wireless router, without a modem?

  Hello HP Support Forums users,

  I have a question about setting up a wireless router. I was wondering if it was possible to put in place, without going through a modem. Currently, I connect to the internet by plugging a cable Ethernet, CAT5 port on my wall, and then plug the cable on the side of my laptop. Right now I have a disabled and I need my laptop to be able to spend my small office. So, is it possible to configure a WiFi router without a modem?

  TannerJP wrote:
  

  Hello HP Support Forums users,

  I have a question about setting up a wireless router. I was wondering if it was possible to put in place, without going through a modem. Currently, I connect to the internet by plugging a cable Ethernet, CAT5 port on my wall, and then plug the cable on the side of my laptop. Right now I have a disabled and I need my laptop to be able to spend my small office. So, is it possible to configure a WiFi router without a modem?

  Yes, simply plug the CAT5 Ethernet cable into the WAN or Internet port on the wireless router.  That's what Verizon for their FIOS service.

• Wireless router + internet = blu - ray player?

  Is it possible?
  I use the Belkin router 54 + existing as a bridge/access point wireless and get a new N Router for the internet.
  It is possible to configure the wireless ap/bridge G router and connect it with a cable ethernet for the BDV-E370?

  I am answering my own question.
  It is possible.
  I loaded the dd - wrt firmware on both routers and I configured the router that is connected to the Sony Reader as a client bridge or Repeater (acts as an Extender of signal with half of the speed + wap).
  YouTube is a very good video on dd - wrt Repeater bridge Setup.
  http://www.YouTube.com/watch?v=UD-Hq3kgvk4
  I had a router Belkin F5D7231-4, but I've upgraded to a router n, Linksys E2000, which is the Repeater on 5 GHz bridge (main router is a Linksys WRT610n-v2). Both work very well.
  I bought the rebuilt a little more than for ($65+$ 32) then the Sony usb adapter, but at the same time, I upgraded my network 2.4 ghz + 5 ghz n too. So basically I have two simultaneous networs in my house.
  If you use only a router that you add to your existing wireless network, it is much cheaper then buying the Sony adapter and at the same time that you can extend your wireless signal too.

• Need help to connect the old Windows XP to new wireless router, please

  Hello
  I have an old desktop running Windows XP Edition family 2002 version, which has been connected to a Netgear WG311 802.11 wireless router g. I was unable to connect to other computers, so I replaced the Netgear with an E1200 Linksys wireless router. Now, all other computers find the Linksys router, but the older Windows XP desktop will not (because I don't use it to configure the router?).  How to connect your old computer to Windows XP to the new router, please? Thank you very much for your help.
  Walt

  Hello
  I have an old desktop running Windows XP Edition family 2002 version, which has been connected to a Netgear WG311 802.11 wireless router g. I was unable to connect to other computers, so I replaced the Netgear with an E1200 Linksys wireless router. Now, all other computers find the Linksys router, but the older Windows XP desktop will not (because I don't use it to configure the router?).  How to connect your old computer to Windows XP to the new router, please? Thank you very much for your help.
  Walt

  The problem is probably that the Linksys E1200 is a wireless-N Router and your former Office no doubt has a wireless adapter that is only capable of wireless-G (or perhaps Wireless G and B).

  Are adapters wireless in your other computers wireless - n?  If so, it perhaps is the reason why they could not connect to your old G of Netgear wireless router.

  You can get a new wireless-N for the office adapter or configure the E1200 wireless g available.

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway