Configure AP 1200 Series

Similar Questions

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• More HP psc 1200 series (all-in-one)

  MI more HP psc 1200 series all in a no prints porque el sistema reported that no tiene papel. He puesto cantidades of papel, pero continua respond that no papel tiene distintas. MI PC desktop are HP y tiene Windows 7 Ultimate. Gracias.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:

  http://support.Microsoft.com/common/international.aspx

  Gracias.

• Aironet 1100/1200 series and Windows

  Is it possible to use the Windows IAS Radius with Aironet 1100/1200 Series light? If yes are there problems you may need to pay attention to?

  Respectfully

  You can use the server Radius IAS for LWAPP. I'm not aware of any questions.

  Someone else can add to this.

  -> Sushil

• Change BVI subnet on POE 1200 series

  I have a 1200 Series couple I want to find a way to manage remotely. I could go on a plug in a cable, but I just want to know the order of the steps to follow.

  I need to change a vlan existing devices from XX to YY then change the Virgin British Islands up to her also to the AA. The problem I have is that they're POE so when I change the BVI I lose power and they reboot with original settings.

  I thought that the process would be;

  -change the IP BVI so its in the new VLAN YY

  -change of sub interfaces to match

  -change the vlan native on the kernel to match

  The unit stops and restarts before I can finish. Any tips?

  You must put this in config unless you just want to have a basic config.

  Sent by Cisco Support technique iPhone App

• W/Vista I do not find, install and configure the HP PSC 1200 series like on Windows XP utilities

  On my HP Windows Vista laptop I can not install the corresponding HP, printing, copying and scanning utility as on Windows XP.

  The Vista Gallery program supports the scan function. What seems absent, it's diagnosis and maintenance, such as the ability to calibrate the connected (via USB) HP PSC 1205.

  I receive comments and help,

  Mel

  HI Mel,

  The PSC 1200 supported by the basic features of driver that with any what neewer of Windows XP operating system.

  Below you can what functionality is available and the limitations of the software as well:

  http://support.HP.com/us-en/document/c00808543

  Kind regards

  Shlomi

• Aironet 1200 series - power of the weak signal near AP

  I recently bought an access point of the Aironet 1200 (AIR-AP1231G-A-K9) series and the initial setup - IP configuration on the AP, the installer does a SSID and turn on the radio.

  I used my laptop to connect to the SSID that I created, but to my surprise the signal strength of my SSID was only 2 bars and sometimes 1 bar and I'm within 2 feet of the access point. However, the speed of connection/signal quality was varying between 24 Mbps and 36 Mbps.

  Why is the signal strength so low?

  Is is because I did not buy them with external antennas?

  I missed something during the initial Setup?

  Y at - it an option that I have change/fine adjust in the GUI to get the best signal strength?

  Help, please.

  "Is is because I did not buy them with external antennas?

  Yes, that's correct. There is no internal antennas on this model of AP.

  You need at least one, preferably two antennas of the same type for each radio. If you have the old 'A' radio with the paddle antenna, then you only need one or two antennas of radio 2.4 G.

  Good luck

  Scott

• configuration error Windows series 7/labview 9

  I just upgraded to labview 9 and updated upgraded to windows 7 64 bit.

  VI which was working fine, now no longer works, the culprit is to configure the resource name of the series.

  Normally, you click Refresh in the menu dropdown and a list of com ports, but is happening is no longer after updates.

  Even when I manually type in the correct Comm. port, the visa is not capture of data from this port.  Using a terminal like siow program or hyperterminal I can still connect and communicate with my hardware, there seems to be a problem of labview/windows.

  Hello eximo.

  You can see the COM ports in MAX as resource VISA IO question up to check com ports after knowledge bases

  Link1, link2 , and link3 also, I was wondering after the upgrade you re-install all the drivers, otherwise here is the last driverwhich VISA is compatible with Windows 7.

  Thank you and have a great holiday!

  NOR-khil

• Point of access Cisco Aironet 1200 series help

  We have 4 Cisco Aironet 1200 Access Points and they are all set to authenticate with our RADIUS server. However, authentication is hooked and can't understand why. Does anyone have any knowledge/experience with Cisco Aironet 1200 Access Points configuration?

  OK, I do not work with the GUI so although the memory is a little hazy but from the APs home page look on the left hand side and there is an option for something like "Software Setup" or something to that effect. You should be able to find the IOS version of here. This requires that you are indeed runnig IOS code. How old are these APs? If more than a few years ago (and perhaps even more recent) that they could very well be running VxWorks and then we are in a different ball game. If you see what I have described above and the homepage for the AP is often white with a bit of greenish-blue, bluish-green color then IOS, if it is more colorful, yellow stuff and VxWOrks.

  I hope this helps. Let me know if you need anything that anyone else. I will try to answer as soon as POSSIBLE.

• Cisco 1200 Series AP - expand the network?

  Hello

  I have a Cisco AP's 1200 and there are 2 rooms in my house where I do not have enough reception.

  Can I use something like a Repeater or a bridge? I have active encryption LEAP.

  Thanks for your help,

  Concerning

  Bottom

  Not exactly - the second access point in your case would be configured as a Repeater, so nothing would be connected to it except the power cord. It is tuned for the AP main reason for which the flow of this AP will be half of the regular AP among other things.

  What I would do if I were you (because I don't like repeaters) is buy a linksys router and plug the modem cable on it.

  This does two things - you have now the possibility to create a network internal behind this 'physical firewall' using the NAT translation. You have also 4 ports that you can plug stuff in to share a connection.

  So, you plug the two AP in the linksys box and now you have two RF cells that provide flow high with out having to repeat.

  The drawback here is to get a cable to the furthest AP.

  The result is the AP do not have to be next to the cable box and you can now location in more desirable places around your home to maximize coverage without sacraficing flow.

  The added benefit to protect your data from queries ping not allowed and do'ers wrong trying to pop locks easy.

  see the "shields up" pages on www.grc.com who will explain better than I probably...

• Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

  Dear support,

  I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

  Here is the information on the module

  ciscoasa (config) # sh Details of module 1
  The details of the Service module, please wait...
  ASA 5500 Series Security Services Module-10
  Model: ASA-SSM-10
  Hardware version: 1.0
  Serial number: JAF1115066U
  Firmware version: 1.0 (11) 2
  Software version: 1.0000 E1
  MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
  App name: IPS
  App status. : to the top
  App status. / / Desc:
  App version: 1.0000 E1
  Data of aircraft status: Up
  Status: to the top
  Mgmt IP addr: 133.1.9.144
  Web to MGMT ports: 443
  Mgmt TLS enabled: true

  your help is very appreciate.

  Thank you

  Best regards

  Hi Sothengse,

  Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  https://www.YouTube.com/watch?v=FgYU5ZXwk4g

  Concerning

  Knockaert

• The pci configuration 6143 S series for the acquisition of data with the analog trigger level? (say to .5v)

  I am interested in buying a probe voltage signals. I use NIDAQ S-series PCI-6143. My requirement is that I need to acquire only above a certain level. I tried to use the task of triggering NIDAQmx but it fails to give error-200077 code. and the description says im allowed to select only digital edge trigger.

  Help, please.

  Thanks in advance

  HI Maria,

  in fact, the message you get is itself, as NI 6143 specifications indicates that this card supports just digital triggering. You will find the list of material of the series that supports analog triggering here: that S-Series (61xx) Support analog devices triggering?, or you can use an external circuit as comparison of analog signal.

  Kind regards

  s9ali

• Server 2008 R2 installation will not configure on DV7 series laptop

  I installed the Server 2008 R2 on a laptop DV7-7012nr. I upgraded the memory up to 16 GB. I deleted all the partitions, and then divide the hard drive into 2 partitions. Partition 1 is 7 442 Go Windows, Partition 2 is 256 GB server.

  When I install, windows server 2008, in dual boot, it will not complete the configuration for the material. This leaves me the choice either reinstall Windows server 2008 and to come back to the same error or return to windows 7.

  How can I get a dual boot for a full installation of Windows server 2008 R2 Enterprise Edition or Standard on my DV7-7012nr laptop?

  After spending 5 days with installing Server 2008 R2 64-bit on this laptop, I contacted the HP Support. Technical support HP and after 4 hours and 7 different technicians, I was informed that they can not help me with the installation of Server 2008 on this laptop. I know it's possible, and I installed Server 08 several times that I can remember. I'll have to this laptop with the conclusion that although HP says that it will work, it will not return.

  Summary; Windows Server 2008 R2 64-bit Standard or enterprise will not be installed on the HP Pavilion dv7-7012nr laptop.

• LaserJet 1200 series: Laserjet printing problem

  My laserjet 1200 prints a dark line on one side or the paper. Is this a problem of cartridge or something more serious?

  At my new works today, great cartridge. Thanks again once, saved me buying a new printer.

• Update IOS Cisco Aironet 1200 series

  I'm currently running;

  C1200-k9w7 - mx.123 - 7.JA2

  JA version 12.2 (8)

  The search for certain documents or a list on the cisco site that shows the latest versions of IOS and if there is a newer version, I should look to use on them. Any advice would be appreciated.

  Well, it seems that v12.3.8 is later if you have 1200

  http://software.Cisco.com/download/release.html?mdfid=277026213&flowid=7...

  Sent by Cisco Support technique iPhone App