Configure SSH on Cisco uBR7246VXR? Help, please
I have a file void startup-config on my ubr7. I need activate shh so that I can ssh to the uBR without being physically next to him. IM tells me I should activate RADIUS? Does anyone have an idea how I can do this?
I have never used/configured this particular type of material, but if it runs Cisco IOS, then you can follow this:
http://www.TheGeekStuff.com/2013/08/enable-SSH-Cisco/
Check it out and let me know if you have any questions
Thank you for evaluating useful messages!
Tags: Cisco Security
Similar Questions
-
How to add images to my table and how to configure the Web site? Help, please
I do not understand how to configure the Web site and add images to a table and make hyperlinks.
First, set the folder of your Local Site saying DW where to save the files on your local hard drive. Go to Site > new Site.
I think it is easier to start with a page layout predefined by using one of the appropriate templates to bootstrap that comes with DW.
Go to file > new > (Starter models > models Bootstrap). Select one:
- Bootstrap-Agency
- Bootstrap-eCommerce
- Bootstrap-Portfolio
- Bootstrap-product
- Bootstrap-real estate
- Bootstrap-curriculum vitae
Press the button create.
For pictures, go to insert > Image. Select an image and save it in the folder of your local site.
Nancy O.
-
Help to configure the router Cisco 1941
Help!
I just bought a router cisco 1941, I understand, it came with the Cisco CP, but I don't know how get you to the part where I can use it.
Also, how can I connect to the router directly without using the HyperTerminal console, all I want to be able to do is configure the address IP of the ISP and my IP address so I can use it for surfing the internet.
Help, please.
Hello
Thanks for the screenshots and show the output! You will need a few lines of command for CCP to work:
Configure the terminal
username username privilege 15 secret PASSWORD
IP http server
local IP authentication
Sent by Cisco Support technique iPad App
-
Hello
In fact, I wanted to set up ORACLE with Informatica Power Center (ETL) database connection. But my problem is that I installed the oracle database with grid inside VMWARE with the RHEL operating system. But what INFORMATICA etl software is installed outside VMWARE, which is located in WINDOWS 7 Professional.
I would like to know how I can access and configure oracle database of windows 7 Professional as oracle database is installed inside VMWARE RHEL 6.5 operating system.
Help, please.
HERE'S HOW I SOLVED IT: -.
Here is the url for the NAT that could become useful for other institutions.How to Setup Port Forwarding in VMware Workstation 9 | Virten.NET
-
How can I configure reader adobe XI as one of my printer port? Help, please.
How can I configure reader adobe XI as one of my printer port? Help, please.
Adobe Acrobat (Windows only) comes with a virtual printer that allows you to create PDF files. The free player does not work.
-
I've just upgraded to PSE 12 and first E 12 and tried to installed several times. Pop up says "Configuration Error"; contact Adobe Tech Support (?); and "mention the error code 1"! Help please!
Installation seems to work fine until, and including 'Technologies share '...
I have cleaned all the disk *.tmp files, deleted all the shortcuts and various Adobe programs and he then successfully installed.
Now, if I can get the updates to work. There is always a challenge with the Adobe software.
-
Help please, cannot complete phone ater installation performing a software update by using the link to Blackberry.
Sequence of events;
Recognized by link to Blackberry phone.
Reload the selected device - available 10.0.10.90 updated version software.
Get - software update seems to load correctly then unplugged Z10.
Phone restarts, welcome to Blackberry, English (UK) checked, swupe left.
No available SIM card, slide to WI - Fi.
Password entered for home network and confirmation screen displays connected.
Agree screen - countries changed to United Kingdom (English),
the bottom slot, I agree to the Blackberry ALS...
"I agree" and "I do not accept" buttons cannot be selected and
After a short delay could not connect appears.By pressing "Settings" goes back to the page of the networks Wi - Fi with
confirmation that the connection is good and round, there it is again.Completing the update software several times as indicated above and also of
www.BlackBerry.com/updates by forum next display to
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-
to-Reload-your-Blackberry10-OS/td-p/2187545
and get the same result every time I would appreciate help to solve this problem.
Result, I thank you, using a WiFi hotspot from another phone installation completed perfectly. Now curiously etc.on Z10 browser works perfectly uning home WiFi. Again, thank you for your advice. Best regards, Bob
-
Help please!
CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below
You MUST use the special version and the serial number on the page, not your original drive or serial number
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
NOTE that CS2 will not install on a Mac "modern" with an Intel processor, and when you install the special version of the PPro2 on a Win7 computer Win8 or Win10, you may need to right click on the program icon and select Windows XP compatibility in the popup of option
-
Help, please! Connected to the VPN, but cannot access internal servers.
Hi friends,
I'm a newbie on vpn stuff, I set up a base on a Cisco ASA 5505 vpn by using ASDM, and I was able to connect to it. However, I can't ssh or RDP to one of the servers in the House after that I connected to the vpn. Here is the configuration. Help, please!
ASA Version 8.2 (5)
!
hostname sc - asa
domain abc.com
enable the encrypted password xxxxxxxxx
xxxxxxxxx encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
DNS server-group DefaultDNS
domain OpenDNS.com
sc-pool_splitTunnelAcl-list of allowed access standard 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.96 255.255.255.240
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd dns 208.67.222.222 208.67.220.220 interface inside
rental contract interface 86400 dhcpd inside
dhcpd abc.com domain inside interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4 - md5, rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
WebVPN
abc group policy - sc internal
attributes of the strategy of group abc - sc
value of server DNS 208.67.222.222 192.168.1.3
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value abc-sc_splitTunnelAcl
field default value abc.com
a001 xxxxxxxxxxx encrypted password username
a002 xxxxxxxxxxx encrypted password username
username a003 encrypted password privilege 0 xxxxxxxxxxx
a003 username attributes
Strategy Group-VPN-abc-sc
a004 xxxxxxxxxxx encrypted password privilege 0 username
a004 username attributes
Strategy Group-VPN-abc-sc
a005 xxxxxxxxxxx encrypted password username
a006 xxxxxxxxxxx encrypted password username
username privilege 15 encrypted password xxxxxxxxxxx a007
remote access to tunnel-group abc - sc type
attributes global-tunnel-group-abc - sc
address sc-pool pool
Group Policy - by default-abc-sc
tunnel-group abc - sc ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:e7df4fa4b60a252d806ca5222d48883b
: end
Hello
I would suggest you start by changing the pool VPN to something else than the current LAN network and see if that helps
These should be the configuration required to achieve this goal
- First remove us pool setup VPN VPN
- Then we delete the VPN Pool and create again with an another address space
- When then attach this new Pool of VPN again to the VPN configuration
- In the last step, we add a NAT0 / exempt for this new pool VPN NAT configuration and remove the old ACL line for the former group of VPN
attributes global-tunnel-group-abc - sc
no address-sc-swimming pool
no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0
IP local pool sc-192.168.100.100 - 192.168.100.110 mask 255.255.255.0
attributes global-tunnel-group-abc - sc
address sc-pool pool
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.100.0 255.255.255.0
No inside_nat0_outbound access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.96 255.255.255.240
-Jouni
-
Help, please! Cannot access the web after connected to the VPN
Hello
I'm a newbie on Cisco products. I configured a Cisco ASA 5505 with VPN firewall. However, I can't access the web after I connected to the remote IPSec VPN. I also cannot connect to the bands using the intellectual property. But I can connect to the internal servers in the office with no problems.
Here is my setup, can someone help please? Thank you very much
ASA Version 8.2 (5)
!
host name asa
xxxxxxxxx.com domain name
enable the encrypted password xxxxxxxxxxx
xxxxxxxxxxx encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
area of zone clock - 8 schedule
clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 107.204.233.222
name-server 192.168.1.3
xxxxxxxxx.com domain name
inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal strategy group xxxxxxxx-sc
attributes of xxxxxxxx-sc group policy
value of 107.204.233.222 DNS server 192.168.1.3
Protocol-tunnel-VPN IPSec
XXXXXXXXXX.com value by default-field
xxxxx xxxxxxxxxxx encrypted password username
Strategy Group-VPN-xxxxxxxx-sc
remote access to tunnel-group xxxxxxxx-sc type
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
Group Policy - by default-xxxxxxxx-sc
tunnel-group xxxxxxxx-sc ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02
: end
Hello
Try adding the following commands
permit same-security-traffic intra-interface
NAT (outside) 1 192.168.1.96 255.255.255.240
Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.
In this case, these configurations should do the trick
In order from top to bottom, they would do the following things
- First remove the pool VPN and VPN configurations
- Then remove the VPN pool
- Remake of the VPN Pool with different network
- Reattach the VPN pool for VPN configurations
- Configure NAT0 to the new cluster of VPN
- Remove the old line of the ACL of the configuration of NAT0
attributes global-tunnel-group xxxxxxxx-sc
no address-sc-swimming pool
no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0
IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240
Of course you also have the NAT configuration for VPN pools new Internet traffic
NAT (outside) 1 192.168.2.0 255.255.255.0
Please rate if the information has been useful if this resolved the issue as mark responded.
-Jouni
-
I have 3 windows-based devices. Portable... Desktop windows 7, windows 7, windows desktop 8. All these devices connect wireless to my network at home. Currently, none of them can see the wireless network... they see networks (IE my neighbors) but not my network and therefore can not connect to it. I just installed a new router, but it was exactly the same with the old router. New router is Netgear nighthawk... former AC1900 was cisco Linksys EA4500. My devices apple and android phone view all network and are able to connect to it. The network seems to be invisible for that windows devices? Help, please.
Thanks in advance.
Shawn is on the right track if its terminology is misleading. 802.11 g and 802.11n are protocols, not frequencies.
Your router is dual-band, which means that it can use the radio the 2 GHz and 5 GHz bands. It seems that it may only use the 5 GHz band. NICs 802.11n and 802.11ac may support only the 2.4 Ghz band, as is probably the case with your computers, or both. It seems that the router can be configured to use 5 GHz only. Check the settings. The default is to use both, but it is configurable.
-
I lost my iphone and its dead and I can't find on find my iphone help please!
I lost my iphone it also died and find my iphone does not. help please
Nothing we or anyone can do.
If your iDevice is lost or stolen
If enable you find my phone before it was lost or stolen, you can track only when connected to the Internet by Wi - Fi or cellular. What you can't do, is follow your device using a serial number or other identification number. Neither Apple nor anyone else may find your device. You can't recover your loss unless you make your device for the loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen, what do you do? There are things you should have done in advance - until you have lost it or it has been stolen - and things to do after the fact. Here are a few suggestions:
1. declaration of a lost or stolen Apple product
3. AT & t. Sprint and Verizon can block phones stolen/tablets
4. What-To-Do-When-Iphone-Is-Stolen
6. what to do if your iOS device is lost or stolen
7 6 ways to track and recover your lost/stolen iPhone
9 report Stolen iPad | Stolen lost found online
It pays to be proactive in following the advice on the use of find my phone before you lose your device:
2 set up your iDevice oniCloud
3. OS X Lion/Mountain Lion - in regard to my Mac
4 the free configuration find your iPhone (even on unsupporteddevices)
-
My husband reset my firefox and now I've lost all my favorites. Help, please!
There everything resets due to a virus. Now, I have NO favorites. I can't even my registration information because my email address is now different from that of the file. I'm crazy. Everything I needed was in my favorites. Help, please!
Hello
I guess you have Firefox Sync (as you MENTION your email), and your husband used the Reset Firefox feature?
Please make sure you have a folder called "Old Firefox Data" on your desktop. If there is, then in Firefox unsync your current Firefox sync account, save new bookmarks, you can do (please see Firefox export bookmarks to an HTML element of the file for backup or transfer bookmarks) and then go to your profile folder:
- Open the troubleshooting information page using one of the following methods:
- Click the menu button
click Help
and select troubleshooting information. Should open a new tab containing your troubleshooting information.
- If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
- Click the menu button
- Click on the "View file" button by "account profile".
- Closing of Firefox (Menu
>
)
- If you are unable to use Firefox to access your profile for a reason folder, please visit https://support.mozilla.org/en-US/kb/profiles-where-firefox-stores-user-data#w_finding-your-profile-without-opening-firefox
- In your Firefox profile folder, rename the file places.sqlite old places.sqlite
- Go to the "Old data Firefox" folder and copy the file places.sqlite and paste it in your Firefox profile folder where you renamed this file
- Open Firefox again and check if your bookmarks are there.
- (Optionally) recover bookmarks you exported by following this link: import bookmarks to an HTML file
You can try to configure sync still once more. Let us know if this helped!
- Open the troubleshooting information page using one of the following methods:
-
Can anyone help please? I am a user of Windows Live Mail for a long time, but I am disappointed with their product, because it crashes regularly and recently wiped a lot of messages, so, after having heard great reports, I think that the time has come to try Thunderbird. I do, however, have a few questions that I would be grateful if someone could advise me on please...
I know how to move e-mail messages in Thunderbird, but is it also possible to move my accounts and their settings from Windows Live Mail to Thunderbird without having to configure each new individually please? The Import Wizard appears to count it is possible, but has nothing more after "import options, account settings, address book, filters and other data of:" even after a click on the next button. I installed the import/export addon, but always without success. Is it indeed possible please?
Also, is it possible to install the views 'fast' section that WLM has on Thunderbird, which was allowed to see all read mail from each account in one place please? This a really useful feature and I want to keep if possible.
Any help much appreciated.
Import of account to Windows live mail never made Thunderbird... partially because there is little demand, and partly because Microsoft not to change.
However if your accounts are with the largest suppliers outlook.com, hotmail, yahoo etc. or the large national ISPS and then set up your account is probably as simple as enter the e-mail address and the password. (There are often problems with poorly reported passwords. It is anti virus firewall clutter it and an adjustment for the firewall to allow the Thunderbird gets things on track)
Your 'quick' view seems unified records of the Thunderbirds.
See Menu (alt + V) > records > unified
-
No internet connection, no dns servers. Help, please!
Hello
I have an Apple Airport Extreme, I had used with internet of Cox for the past 2 years. I recently moved and had to sign with Time Warner Cable. I decided to buy my own modem this time, but were not able to configure my wireless network. I can connect via my wireless hard connection ethernet (via the router) very well. The led is green on the internet connection, but the flashing orange on the Airport Extreme. He said that the problem is not internet connection (which is said to pass the modem which does not work) and not dns servers. I can put in the dns servers (I've tried a few different things to include 8.8.8.8 and 8.8.8.4) who get rid of this message, but I still have the first internet connection. My Version of Airport utility is 6.3.5, my modem is a Motorola Surfboard SB6141.
Help, please!
The Motorola modem will have need of a power extended down with Time Warner service in order to obtain a new valid IP address of the Server Time Warner... and... Ince you have changed providers and modem... AirPort Extreme will be reset to the factory settings and then set it up again, so that it "learn" the new settings he needs.
If you decide you want to try our tips...
Turning off the modem by pulling on the power cord to the back of the unit
Unplug the co - ax cable and Ethernet cable so
Let off for at least 30 minutes the modem... 60 would be better... more won't hurt
While the modem is turned off... and with the AirPort Extreme on for a few minutes... Press and hold the reset button on the back of the airport for 7-8 seconds, then release and allow a minute for the airport restart to a slow status of amber light, flashes.
Then, turn off the AirPort Extreme
Once the modem has been turned off for at least 30 minutes, plug the co - ax cable and Ethernet from the modem into the WAN "O" on the AirPort Extreme port cable
Turn on the modem and let it run for at least 10 minutes by itself
Then, turn on the AirPort Extreme and let it run a few minutes
Set up AirPort Extreme again and check to see if everything is operational
Maybe you are looking for
-
How to go from iPhoto 09 to iPhoto 11?
-
Is there a solution to the print queue do not release?
-
Limits of Panel/window closed vi
I need to get a vi limits Panel and or window but I am unable to do without opening the vi. Right now Im opening the VI for a moment before closing again to insert it in a secondary (resizing of secondary school under the boundaries of the Panel of V
-
Hi all I'm in Torquay in the State of Victoria - Australia. I'm running a 64 bit, Win 7 o/s. I have this PC protected by password that worked fine until yesterday. We have an intermittent failure of wiring that unfortunately seems to affect the circu
-
laptop is no longer connects to the wifi at home
Computer Dell laptop for my son will connect is no longer our home wifi. It's just less than a year and work very well so that there is one month. Other devices (other laptop Windows 7, Windows 8 Wallpapers xbox) connect without problems. It is a Del