confirmation fax image

Similar Questions

• OfficeJet Pro 8620 include fax on the confirmation report image

  The manual says I can include a picture of my fax on the confirmation on the 84 page report:

  http://h10032.www1.HP.com/CTG/manual/c04204791.PDF

  To include an image of the fax on the report
  1. in the Control Panel printer displays, touch and drag your finger across the screen, then
  Select Configuration.
  2. press on the configuration of the fax machine.
  3. touch Advanced fax setup and touch Fax of Confirmation.
  4. tap on (fax) or we (send and receive).
  5. press on the Fax Confirmation with the image.

  However when I go into Setup, I don't see any reference to the "Confirmation of fax with the image.

  My only chosen are:

  Off does not print a fax confirmation report when you send and receive faxes successfully.
  On (fax) prints a report fax confirmation for each fax you send.
  Upon receipt of the fax) prints a report for each fax fax confirmation you receive.
  Print a report of fax confirmation for each fax that you send and receive on (Send and Receive).

  My firmware version is FDP1CN1414AR

  Product number: A7F65A

  Hey @darrensweeney ,

  Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

  I understand that you are having problems with the instructions in the manual that explains how 'Touch Fax Confirmation with the image. You have followed the instructions and can not get the same result.

  After completing step 4 and select 'Send of Fax' or 'send and receive', you will come to a new screen that asked 'Touch Fax Confirmation with image' or 'Touch Fax Confirmation'.

  These steps are correct because I have the same version of the firmware and the same printer here at my desk and I followed these steps to get the "Confirmation of fax Touch with image.

  Please try again and let me know what happens. Thanks for posting.

• HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. -Fax Confirmation Page

  I have the HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. It works very well, but how to make a page of confirmation by fax, with the impression of a miniature of the 1st page of the document I sent?  I checked the configuration information, but apparently not have indications confirm that I sent the fax through the confirmation page with a small impression.

  Hi dtaylor569,

  Follow the instructions below.

  To activate the fax confirmation
  1. press the arrow to the right and select Setup.
  2. press on the configuration of the fax, click Fax reports.
  3. press on the Confirmation Fax.
  4. tap to select one of the following options.

  • Discount - does not print a fax confirmation report when you send and receive faxes successfully. It is the default setting.
  • (Fax Send): Prints a report of fax confirmation for each fax you send.
  • On (fax) - prints a report fax confirmation for each fax that you receive.
  • On (Send and Receive) - prints a report fax confirmation for each fax that you send and receive.

  Prints a report of fax confirmation for each fax that you send and receive.
  To include an image of the fax on the report
  1. press Setup.
  2. press on the fax, click Fax of Confirmation reports.
  3. tap on (fax) or we (send and receive).
  4. press on the Fax Confirmation with the image.

• Fax multifunction, MFP 1217 - receipt of confirmation

  Hello, how to set up the fax to print a confirmation by fax with every sent fax?

  Go into your Setup Menu on you before the Panel on the printer.
  1 press Fax
  2. choose Confirmation Fax

• No confirmation of delivery fax Photosmart 7510

  My efax "delivery confirmation" on my Photosmart HP 7510 all-in-one (windows 7) is already set to 'on '. I sent 3 faxes up to now and that you have not yet received a printed delivery confirmation. (faxes show as sent the 'my fax' log on to the printer, but not in my efax account, so I'm still not able to actually print the proof that the fax has been sent.) Something that I missed? Thank you

  Maddyjean, unfortunately, eFax is a company that works closely with HP on some printers, but it's actually a third party company. For this reason, there are some limitations as to what HP is able to control with eFax.

  eFax works this way: your request is sent to our servers ePrint which is then transmitted to the eFax server. From there it is sent to your recipient.

  Because of this configuration, we are only able to confirm that our fax has been received by the servers of eFax, but now eFax didn't put it in place to show that a recipient has received the fax. I would recommend contacting eFax on this limitation, because there is no other alternative for HP to give you right now.

  It is possible that this will change in the future, because the development of this technology is fairly new.

  I hope this helps!

• Can I fax with my equipment?

  Hello.

  I have a HP Pavilion all in one PC and a printer - Scanner - Copier HP Photosmart C4480 all-in-one .

  I am able to send and receive faxes with this equipment, and if so how do I do this?

  Some people say that I need additional software, while others say that there is a "fax facility" in the PC.

  I would appreciate your help. Thank you, bilwardo

  The HP Photosmart C4480 all-in-one printer's specifications indicate that there no fax capability. You may need to click on the tab "card printer" to see the point, that is, the fax is n/a.

  You may be able to scan documents to the C4480 and then send the scanned fax image, If you have a fax on your PC HP Pavilion.

  Log on to the computer and type ctrl + alt + s. A window pop up and you tell the model number. Go to www.hp.com and search for your model number. You should be able to find the software and manuals from here, and you should be able to determine if your Pavilion model has ability to fax.

• HP Officejet 6500 a Plus. How to get a fax received to print in black and white and not the other way around

  I'm using an iMac with OS X 10.6.8.  A fax sent to me is loaded into a folder open on my desktop.  The fax image is white on black al, though the original was black on white paper.  It prints white on black background.  How to reverse the image to black on white?

  Ok. Well I don't believe that you are able to reverse the colors directly on the printer. Once the image has been saved using this color format, you will need to reverse the image on the computer first, then the corrected file printer.

  You can invert the colors using the preview. Once you open the image in preview if you select "Tools" then "Color Adjust". Here you will be presented with slidered for black and white levels. To "reverse" all colors, you need to do is the slider level black all the way to the right, then drag the white slider completely to the left.

  Let me know if it works for you!

  -Sean

• HP Officejet Pro L7780 print, copy, Scan, Fax

  We used the HP L7780 as a standalone Copier (not connected to a computer or a network).

  Here we are ready to give the gift of unity, which still works well, but fear that its internal memory (or hard drive) can store images of copied data from sensitive information.

  How can we delete/overwrite this memory without destroying the operating system?

  We want the printer/copier to be functional for the new owner.

  Hi TechUserOKC,

  If you have not used the printer as a standalone Copier without connection to a computer or a network, then you don't have to worry about the images or the data stored in the device. However, if you sent a fax with this machine there is a chance of fax images could be stored and saved in the internal memory. In this case, you will need to restore the default settings of the printer.

  Let us know if that helps.

• Cannot load the image

  Hi, I tried to put an image in an imageview, but got this error. The interesting thing is that there are Images that I previously added to the project. They work fine, the problem is with new images.

  helpRootImage->setImage("asset:///images/help/connecTapp.png");
  

  and I got this error in the log

  libpng warning: iCCP: known incorrect sRGB profile
  "Unable to get asset in (/apps/com.example.ConnecTappTest.testDev_necTappTest93cfa27a/native/assets/): (/images/help/connecTapp.png)."
  Image not found:  "/images/help/connecTapp.png"
  

  the images are in the current folder. And using the system target file browser, I also confirmed that images are there in the current folder of the device also. They are there, they do not load. Any suggestions?

  Well, I had to fix it myself. The solution is quite simple. There was a. assets.index file in the current folder. I deleted and the next time that I built, everything was perfect.

• I can't change my background image to screen.

  I can't change my background image to screen.

  I followed the process of selection of a desktop image and confirming the image I want to save but the program won't save selection and return to another block background color

  Original title: Customizing Office

  I just right-click on an image that I want as my wallpaper (called "wallpaper". Google for lots of choice) and click set as wallpaper.

  Or see the Microsoft way to do (slow) HERE.

• HP 3180 fax

  How can I correct the spelling of my name appearing on my confirmation fax log printing? Any help would be appreciated.

  Thanks a lot for your help. Problem solved.

  37boncz

• Alert Image if JobNumber do not match

  Hi all

  I need to draw the attention of the image, where the operator link in different location (both the need for job number corresponding).

  Condition, path of the file Indesign & Image File Path job number remains the same.

  for example,.

  InDesign file path: _XXX_ULD/volumes/JobProd/Print/01_LIVE/2016_04/Document/185000042refresh TR

  Image path: _XXX_ULD/volumes/JobProd/Print/01_LIVE/2016_04/185000042r TR/SS_LOGOS/5.12_EXR_1_TR.ai

  var myPath = app.activeDocument.filePath.fsName;
  var mJobNumber;  
    
  var reg = /(\/)([0-9]{8})(_)/;  
  if (myPath.match(reg)){  
      mJobNumber = RegExp.$2;  
  }  
  
  alert(mJobNumber)   //Working Fine
  
  var myGr = app.activeDocument.allGraphics;
  for(i=0; i<myGr.length; i++)
  {
      
      //Problem in below line
     if(myGr[i].itemLink.filePath.match(/mJobNumber/) == null)
     {
       app.select(myGr[i].parent)
       var check = confirm("Selected Images Link Path is Wrong\rDo you want to Continue?"+ "\n") 
      if (check == true)
      {  
          //Proceed Further
          }   
         else
         {  
             exit(0);
             }  
      }
  }
  

  Thanks in advance

  Siraj

  Hi Siraj,

  9 place inside the braces and try,

  var reg = /(\/)([0-9]{9})(_)/;)

  Kind regards

  Cognet

• Photosmart C7280 all in one printer copier fax scanner

  How can I activate the fax confirmation print confirmation faxes?

  IIRC, press Setup > Print reports > Fax Confirmation report > on Fax Send > OK.

• Fraud on the iTunes account

  JJust to receive this email about a purchase which by the way I did not, also received by e-mail on the activities suspicious on my account... all seem to be a scam to get my ID and bank details, can you confirm

  < image edited by host to remove personal information >

  Yes. Send emails to [email protected]and then delete them.

• Equium A60: I get the error message using explorer.exe

  Whenever I try to open an image file using paint or Fax/Image viewer, or I try to drag a file to a folder, I get the following error message:

  "Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience ".

  The error report says:

  "AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll.
  "ModVer: 5.1.2600.2180 Offset: 000847a 6.

  Also I can't open Web pages that open in a new window, IE. Norton Internet Security 2005 also does not open, but has claimed to be active in the background.

  Does anyone have advice for me?

  I tried all the help for explorer.exe on helpwithwindows.com problems but nothing suggested worked - as spyware, malaware removal. I ran a few controls on-line virus - given that Norton does not work I have tried the scans online.

  The laptop was bought last year, and we have lost the recovery CD - so if we need them, then where we can get replacements?

  Thank you very much

  Jonathan

  HI Jonathan,.

  It seems to me that if your OS has been corrupted, and I would recommend that you re-install. You can get the replacement of any Toshiba authorized Service partner recovery CD. You can get a list of the asp from the Toshiba web site.

  Kind regards