Confused! I need a Proxy?

Similar Questions

• Help! I NEED A PROXY SERVER ADDRESS...

  RECENTLY, I'VE RESTORED MY LAPTOP. NOW MY INTERNET CONNECTION IS VERY SLOW. I NEED A PROXY SERVER ADDRESS. WHERE CAN I GET OR FIND A?

  It is not a matter of getting a proxy server address, it "s a question to configure a proxy server that is not a simple process and usually doesn't do much to increase the speed of the connection (although it improves it little to visit repeat sites).  During installation, an address is created or provided if you follow this path, but I really don't think it will solve the problem with the connection speed, even if it helps a little.  The proxy server must be installed on your own network.

  Here is some general information about Proxy Server: http://windows.microsoft.com/en-US/windows-vista/What-is-a-proxy-server. Note that it says it uses a computer other than the proxy server and that it is for commercial environments and not usually for home networks.

  I hope this helps.

  Good luck!

  Here is some information on wireless networks and wireless internet connections that can help with your problems of connection speed:

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Confusion - I need Fireworks?

  Hello. Our small company is trying the trial version of dreamweaver, we anticipate buying a product to create our own website. In any case, I noticed that there are a lot of programs that you can use to facilitate the creation of Web sites such as photoshop and flash. Fireworks has me a little confused. I watched a few video tutorials about it but did not understand what it actually does. It looks more like an intermediary than anything else. Someone could it explain this newbie? In addition, what advice do you for someone just starting out with these products to learn without having to take a course?

  Fire of artifice is similar to Photoshop, because it comes from an edition of chart
  program. It allows, like Photoshop, edit images or create graphics.
  Photoshop and Fireworks have unique strengths. Photoshop is more
  the industry standard and is ideal for digital photography, image
  surgery, creating computer art, photo-realistic etc... Fireworks excels
  in the graphics of web with features such as master pages, scaling smart.
  and AutoShapes. The two will create the HTML code for you - but you should not
  Use them to create web pages. As they are graphical editors, it is
  where their strength lies. Use them to create "site assets" - things you
  will include on your web page - but use Dreamweaver to create the real
  pages.

  Dreamweaver will likely cause you nothing but frustration if you do not
  have a basis in technologies such as HTML, XHTML web-based, and
  CSS. You must take a few tutorials on HTML/XHTML/CSS to efficiently
  Use DW. Start www.w3schools.com and through their free tutorials.

  --
  Alec
  Adobe Community Expert

• Boring Proxy authentication requests

  In our local network, we use Firefox (various versions, from 8 to 23, also 17 ESR references) on windows (xp and 7 32bits) computers. We need a proxy http (squid) with user name and password authentication. Generally only configure us Internet Options in the windows control panel checking the indicator on 'use automatic configuration script' with a url of type 'http://proxy/proxy.pac '. In this script, we give a list of intranet sites (web applications) that do not require authentication proxy on the internet because what are internal sites on our local network. Done on firefox, it must use the option "use the system proxy settings. The question is: during a session on intranet sites the dialogue window of firefox for proxy authentication often seems boring of the operator who must close each time. We have attempted to alleviate the problem disabling firefox automatic updates, updates of modules, updates of search engines, are not attack sites and updates of the lists of fake web documents, telemetry, queries and reports of health and crashed. It seems not to be enough to solve the problem.
  Are there other settings to set "subject: config" page? workaround solutions? Add - ons?
  Thank you for your help in advance.
  PS: Sorry for my English, I'm still learning.

  I did some more tests and turn off all the settings mentioned above in the section the problem is resolved.
  Good bye

• Office want 700-339: 700-339 RAM - confused as to what to Put in the envy

  Hi - I'm confused and need help. I want to upgrade my RAM 8 GB to 16GB. According to records online for my model, I need 2-204 pin DDR3 DIMM. I have been in contact with Crucial for ordering a couple, but they insist that I need the DIMM 240-pin. They suggest that it is perhaps typo on the HP site because 204 pins are for laptops. I sent them a copy of the sheet of HP and they insist that I need 240 pin.

  Could someone point me in the right direction?

  Greetings,

  banhien and Crucial are correct. 204 pins is the memory of the laptop and there is typo on Memphis B memory specifications...

  It's your motherboard, Memphis B. Watching chipset is an Intel H87. It shows two supports DIMM DDR3 204 pins.

  It is the motherboard HP S of Memphis. Watching chipset is an Intel H87. It shows two supports DDR3 240-pin DIMM.

  See you soon!

• Unable to connect to the Web Services Proxy/unused (a HP 7500 JO)

  Hello

  Here's the situation:

  Previous installer:

  .  I have connected my 7500 for the corporate network (IP = 172... series)

  .  registered the product with ePrintCenter

  .  used a PC under Windows to print (and scan) with the printer

  .  web proxy entry "webproxy.phila.gov".

  .  However, because homeland security rules, I could never work, so I just let it go

  Current situation

  .  has taken the home printer and set up on my home network, i.e.,.

  -using the 192.168.xx.xx series

  -Router broadband Netgear ' G' (1 years) set up at the 192.168.xx.254

  -SSID & encryption assigned

  -printer, the value 192.168.xx.155 (static IP address, the subnet and the gateway assigned as well)

  -My DNS is identical to the bridge and it works fine for all the internet access to this day

  -with the help of a PC and a Macbook Air to print and scan and everything works fine

  .  HOWEVER,.

  -Initially, 'web services' were active (carried over from when I was on the company neetwork?)

  ..  Are looking for, found and downloaded updates

  -When I went to hp.com ePrintCenter he showed the product as 'registered '.

  ..  He would'nt I would like to connect (with a name and a password I had used previously), or create a new account

  ..  I never remember getting an email address of the printer

  ..  and I had never been able to send anything to the printer to print because of my problem of network security

  -Yes, after trying all sorts of things, I:

  ..  I tried to get another email without success

  ..  tried to re - enable web services, but he said I need to 'proxy', and I discovered that he had always "webproxy.phila.gov."

  ..  I have reset the values by default web services and network values

  ..  I put the static IP address return address in (i.e., printer, subnet and gateway (it has nowhere to put in a DNS one))

  ..  printing and scanning to 192.168.xx.155 works fine

  ..  From my iPad AirPrint works very well

  .  BUT, I still can not online and therefore web server, web services are not enabled, therefore not ePrint

  -everytime I try, it says it needs a proxy

  - but I don't have a proxy installed on my internal home network bit

  -Comcast/Xfinity, my ISP, do not use a proxy

  So, I'm dead in the water.  I can't figure out how to get the web services enabled; I do not use a proxy, so I don't know how to go beyond this issue. How to regenerate address of the printer; and so, how do I connect an account on the ePrintCenter (or get them to send me my old account information).  I'm dead in the water and cannot use a feature most of my printer that I desperately want to be put in place and functional.

  Any help would be greatly appreciated!

  Tommy

  Problem solved, but I don't know exactly how I did it. However, I went back in and let the printer assign the IP address. Then I turned the printer off and on again. Last I kept pressing the button "Printer e-mail address", who has repeatedly failed, but then finally went through and print the 'printer' page, I quickly used to connect to the ePrintCenter and put everything in place.
  
  Now it's working.

• I need assistance with the signing of the app

  So I made an android app and when I heard about the offer of playbook I went and reconditioned using package online Manager. I sent my app for review and I just got an email saying that my application has not been approved because it has not signed correctly. I am so confused, I need help.

  HM, strange. I used the tool to sign several apps (loading of Android applications on my PlayBook is such a pleasure), and it worked very well.

  Open your BAR with WinRar or WinZip file, there should be 2 folders inside. META-INF folder must contain a MANIFEST file, two files RDK and two files of the AUTHOR if the app is signed. If you don't see these files not try once more with the online tool, if you have doubts about the measures, just ask, we will try to help you.

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• LAN > PROXY > PIX > > > Internet. How?

  Hello

  We use PIX 515E (and we are satisfied), but now I need Activate Proxy Server with some restrictions (user can´t download files .exe etc.).

  Current setting: user has in Internet Explorer (for example) on the connection setting is checked "use proxy server" (192.168.1.151, port 3128) and all restrictions are applied successfully. BUT: If the user uncheck this setting - it can connect to the internet and no restrictions are applied on him - he can download whatewer he wanted.

  On the old version of firewall (kerio winroute 4.2.5) I can put the packet filter rule, and only the user who put the proxy can connect to the internet.

  Can you help me how I can configure PIX?

  Thank you, Milan

  Hello.. as the internal DNS is 192.168.1.2, you must allow access to this IP to talk to the DNS servers of the ISP.

  access your lists looks like this:

  access-list outbound01 permit udp host 192.168.1.2 host 194.228.2.1 eq 53

  outgoing access list permit udp host 192.168.1.2 host 194.228.2.61 eq 53

  outbound01 list of access permit tcp host 192.168.1.151 all http eq

  outbound01 list of access permit tcp host 192.168.1.151 all https eq

  make sure you nat the 192.168.1.2 host out.

• Proxy wit h ASA

  I have to apply ASA 5520 with a failover do we really need to proxy server for internet access, ASA. Or only ASA will solve this effect.

  I will not see any reaosn why u need a proxy to access the internet.

  ASA in a failover can still make the nat and access the internet u.?

• Incompatibility of proxy on predefined Ingestion

  I was very pleased with the new automation proxy in Pp, but I ran into a problem right at the beginning. The presets that are available are still larger than I want to work with. I need proxy images about 640 x 360. I exported several smaller presets directly from Media Encoder as .epr files, but whenever I try to add them I get a popup of incompatibility of Proxy error:

  

  All the tips are greatly appreciated.

  My original media is files MOV H.264 1920 x 1080.

  With the update 2015.3, Ingest presets have been added and are needed for Proxy and Ingest workflows. Encoding presets is the same presets that you would create in previous versions of first, SOUL, etc.

  Ingets presets have additional functions, and may also include a preset encoding. So, you have already done the first part in creating your desired preset encoding. In the SOUL, you now want to create a pre-defined Ingest new (+ predefined browser button or go to "Preset" menu > Create ingest Preset). In the dialog box settings preset to ingest, check the 'Field to transcode to Destination' box, set a Destination, set the Format to the Format that you have created your encoding preset with and then set Preset in your "Preset" created Encoding.

  Click OK and the preset to ingest it is now ready. Go in first and dialogs settings interfere or create proxies, click on the Add button ingest predefined, select your Preset ingest (found in default predefined location or you can export the preset in SOUL to any desired location).

  This video goes on the bases to ingest and Proxies, in addition to ingest presets (and also goes in the other new features).

  Adobe Premiere Pro CC June 2016 Update (v2015.3) - YouTube

• my printer requires a proxy name and address and a name, where can I find these?

  I do not understand the difference between the wireless and connected web. My printer OfficeJet 6500 said now I need a proxy name and address, who they are and where to find them

  Here is a link to a post that provides a solution to your problem. It covers the steps I'd take that do a reset on the printer and check the EWS (built-in web server) to ensure that the proxy fields are clear. It will then cover how to set a static DNS on the printer via the integrated Web server. It is also an Officejet printer in the other post. Even if it is a different model SAP at foot by steps are the same. Here is the link: http://goo.gl/vMNYD I hope that this ehlps.

• Expose the service as a Web service proxy using the sb Protocol

  Hello world.

  My team and I worked on a project of integration between multiple applications. So we created all the OSB projects necessary to connect applications and now I'm working on a web application that reads several newspapers who leave these integrations in the database in order to watch what happens when they are executed. Right now, I need my web application to be able to reprocess or retry messages that present a problem or are in an error state.

  To this end, we have developed a proxy with a sb protocol that allow us to communicate with other services dynamic proxy just in him passing the name of the proxy, its functioning and the message of the body. And finally, here's my question for you guys.

  How do I expose this last proxy (with the sb Protocol) as a web service so I can consume it for action to reprocess/try again?

  Thank you.

  Don't think that you need a Proxy service with SB Protocol at all. As I understand it, your process will be like this:

  1 web app bed DB logs to see what documents need to be submitted again

  2. web App must call OSB to resubmit the log message to correct the proxy.

  What you can do is create a WSDL based proxy HTTP to OSB for a new presentation, Web application must call this proxy and passes the body, the name of the target (full path) service, target service type HTTP (Proxy or Business), target the operation name (optional, like e-mail or type XML services everything will not associated with surgery). You can add a dynamic routing node in the HTTP proxy that calls the proxy target based on information coming from the Web App.

  SB Protocol should be used in a Proxy service if you want to call a Proxy deployed in a single domain of OSB on another area of OSB or composites Oracle SOA. Here, the consumer will be the Web application, so it needs to be a HTTP proxy and not SB.

  P.S.: You should also consider sending transport/custom headers as well, not only the body for your new design be more reusable.

• Workaround for JRE proxy for local addresses always bypass proxy

  Hi all
  
  I am currently dealing with an issue with the proxy in java configuration.
  
  Situation: I need a proxy server to connect to the internet, and I have a few addresses configured in Internet Explorer that bypass the proxy server.
  example of how I have it set up: *. Google.com; * 212.115; 62.69.179.198
  
  The address at which I am trying to achieve is not in the list of circumvention, or beaches excluded in the bypass list.
  
  Initially, I got java set up using the browser settings. I thought he didn't pick up the settings of the browser at all.
  However after you have configured the proxy manually in java it still did not work.
  
  During the search, I came to the conclusion that as soon as I activate the "bypass proxy server for local addresses" in Internet Explorer, or manually in java.
  Customer JRE automatically bypasses the proxy and always uses "proxy direct =". As soon as I turn off this feature, he began to use the proxy server.
  
  I have no idea why this is happening?

  Why do you need to check this option then? Simply configure Java/browser to use the proxy and add it to your list of exception/bypass. That should do it. "bypass the proxy server for local addresses" is a bit ambiguous and depends on the way your network is configured and what is defined as a local address. Is your LOCAL proxy server as well or you are using an external proxy server?

• Firefox crashes whenever I click on options in tools or customize

  Had to reinstall Firefox after downloading a faster option "make Firefox" appeared Mozilla as it completely crashed my internet access. Message kept saying I needed a proxy server address as Firefox connects through a proxy server. Finally had to resort to ATT me reconnected as update had changed my settings of local network search: all checked.
  Now, if I try to download an add-on on it says is installed, it is not - 41 Add acceptable on - and if I click on tools > Firefox plant wi/no crash report options window appears. need to click the icon. Ditto options menu. And will not accept, click on options in Customizing, a hand appears and zero happens.
  Do not have ability to set my preferences, of course. None of these options from the sidebar appears more. I don't have any ad blocking valer'evne after downloading and not running the ad for 41 block.
  Firefox also crashes repeatedly.
  Have you tried to reboot in Safe Mode, no difference.
  I use XP and that many others have no interest in changing to 7 or 8 so that portable continues to operate.

  Your user agent shows you are running Firefox in compatibility mode for Windows 98 (NT 4.10).

  Check that you are not Firefox running in compatibility mode.
  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.