Connect a line of dashboard to another guest of dashboard

Similar Questions

• Unable to connect to shares SMB a Mac, another Mac can connect normally

  I have a Mac under El Capitan 10.11.2 who years connected easily and normally for a couple of SMB shares on my home LAN. Since arriving at El Capitan (fresh install, bare metal, not an upgrade) that Mac can no longer connect to these shares.

  Another Mac that I (also executed 10.11.2) connects easily and normally these actions.

  The 'Mac problem,' I completely blew my keychain so way aren't saved SMB credentials. Various tricks using cifs: / / or nsmb.conf a few settings do not work, either.

  On this 'Mac problem' I'm never not even invited to the SMB credentials. I get a very "quick fail" and a pop-up that reads:

  There was a problem connecting to the server "".

  Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator.

  I can also "Browse" and see the servers on my home LAN, but when I click on "connect as...". "I get the same non-credential, quick-failed.

  I can connect to none of the user accounts on the 'Mac problem' - same failure mode for all user accounts.

  It's a weird thing. Any tips?

  I have an update with a bit more information.

  I have when I try to install it via the command line...

  $ mkdir/Volumes media

  $ mount_smbfs //raspberrypi/media/volumes/medias

  ... I get the error message...

  mount_smbfs: connection to the server has failed: operation not supported by device

  When I try to climb through the user of Finder interface ('Browse' then ' Connect under... ") ") a single relevant line appear in newspapers, via the Console and All the Messages . This line is:

  16/01/16 12:22:51.297 PM sharingd [309]: 12:22:51.296: SDSharePointBrowser::handleOpenCallBack returned 19

  It's the biggest "stumper" I never treated on a Mac since 1986. I am a computer pretty talented guy. I see that other people have this problem (or variations) and I tried most if not all so-called 'remedies' and nothing has worked.

  Again, my FIRST Mac can connect to all my SMB LAN House just actions. This 'Mac problem' was able to connect to these shares normally prior to my current installation of bare metal to El Capitan, 10.11.2.

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• How can I connect to my database externally from another pc on the network?

  Hi all

  I just install 12 c on my Oracle Linux box and I am able to connect locally to the database, as intended. Now, what would be the first step to connect to my external database from another computer on the network. By example, if the database server is 10.0.0.150 and I want to connect to 10.0.0.151 how can I make this happen? If necessary here are a few references:

  -bash-4, $ 2 cat listener.ora

  listener.ora # Network Configuration file: /ora01/app/oracle/product/12.1.0/db_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oranode1.dba.com) (PORT = 1521))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  -bash-4, $ 2 cat tnsnames.ora

  tnsnames.ora # Network Configuration file: /ora01/app/oracle/product/12.1.0/db_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  ANTHONYDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oranode1.dba.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = anthonydb)

  )

  )

  -bash-4, $ 2 cat/etc/hosts

  127.0.0.1 oranode1 oranode1.dba.com localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  10.0.0.150 oranode1.dba.com oranode1

  Let me know if you need any information. Currently, I am not able to connect to my database using the IP and port (10.0.0.150, 1521) of my 10.0.0.151 pc. Thank you all for your help in advance.

  Hello EdStevens,

  I tried to use the SID with SID = anthonydb and I got the same error message. I believe that we must resolve before listener troubleshoot us this error...  If we look at the file of the listener:

  [oracle@oranode1 admin] $ cat listener.ora

  listener.ora # Network Configuration file: /ora01/app/oracle/product/12.1.0/db_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oranode1.dba.com) (PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.0.0.150)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / ora01/app/oracle

  I have two entries, and I think that I should remove the last entry:

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.0.0.150)(PORT = 1521))

  )

  I created a backup of the file listener and I'm going to give it a shot.

• Is it possible to convert the standard numbered list to the list that appears on the same line a right after another? As indicated in 1. Text goes here, 2. Text goes here, 3. Insert text here

  Is it possible to convert the standard numbered list to the list that appears on the same line a right after another?

  Instead

  1. Insert text here
  2. Insert text here
  3. Insert text here

  This

  1 text goes here, 2. Text goes here, 3. The text here.

  This revised list can take multiple lines.

  I use InDesign CC2014 - if that makes a difference.

  the only way is to convert numbered in the text (select numbered list > ctrl (or right click) > bulleted & numbered lists > convert numbered text).

  Then, with search - replace, you can change the paragraph returns in space (or in space by commas as in your example)

• I tried a lot of time to download Lightroom on my MacBookPro without success. I already remove the firewall. Perhaps because of a slow connection to the Lebanon? Or another problem?

  I tried a lot of time to download Lightroom on my MacBookPro without success. I already remove the firewall. Perhaps because of a slow connection to the Lebanon? Or another problem?

  Beatricel88978029 you receive specific when errors download Photoshop Lightroom?  For more information on how to resolve errors download please see error download and installation of the creative cloud application.

• Change the Image based on the line of dashboard

  Hello
  
  IM using OBIEE 11 G 11.1.1.5
  
  I need to show a dashboard (Image) the company logo on a line of dashboard. I have 5 companies and each has its own logo. That a company can be selected.
  
  Is there a way to building that?
  
  Thank you
  
  Published by: Andres on 16-ene-2012 12:52

  Hi Andres,

  We can make use of the "conditional display of sections within the dashboard based on the results of the analysis. One option is certainly write different analyses (static text or narrative mode) with your company newspapers and their incorporation in the various sections of their reports in the dashboard. These sections should be displayed conditionally based on the fast one of dashboard. You can create analysis, each read the variable of presentation (associated with the command prompt) and display a record only if you choose a particular company. (Ex: create a business with a single column as @{variables.CompanyPrompt}.) Create a filter on it as "equals 'Oracle'. If this analysis, would post a record only if the presentation variable is set to 'Oracle').

  I would keep you updated if I hit many effective otherwise.

  I hope this helps.

  Thank you
  Diakité

• I need script to remove the line with 2 points, another script to remove next lines

  I need script to remove the line with 2 points, another script to remove next lines of two scripts needed help please

  Thanks in advance

  Concerning

  Lakshmiganth

  Scroll through each pathitem and look at the length of his pathPoints group.  If the length is equal to 2 and then use the remove() method to remove it.  For example (this is rough, off the top of my head):

  var lines = new Array();

  for (i = 0;  I have< app.activedocument.pathitems.length; ="" i++)="">

  If (app.activeDocument.pathItems [i].pathPoints.length == 2) {}

  Lines.push (App.activeDocument.pathItems [i]);

  }

  }

  for (i = 0;  I have< lines.length; ="" i++)="">

  Lines [i]. Remove();

  }

• Guest of dashboard based on another line of dashboard

  Hi all
  
  I try o dashboard guests on columns orgcode and the city.
  
  Ex: If I select orgcode 12345 and then in the drop-down list city it should show only the cities that are in the selected organization.
  
  This means that the choices in the drop down list 'city' should be based on the drop-down list orgcode.
  
  Please let me how can know I achieve this.
  
  Thanks in advance.

  Is not "synchronize", that "force". If you click the 'Restrict' box of the first prompt, it will limit values the second prompt will appear only the values that are related to the value of the user selected in the first prompt.

• How to make a line of dashboard depend on another speedy?

  Hi all. I've seen other similar questions asked but never any clear ANSWERS. I would be very grateful if guru can help me achieve this.

  I'm on OBIEE 11.1.1.6.11.  I have 2 guests of dashboard: FY_Month and FY_Quarter, both based on the same dimension. I use variables to repository as default values for the two guests.

  I want to FY_Quarter to change depending on what users chose to FY_Month.

  Example:

  If the user chooses 'JAN-2014' as FY_Month, then FY_Quarter should change to "Q1" 2014.

  If the user has chosen to 'APR-2014' as FY_Month, then FY_Quarter should change to "Q2" 2014.

  I tried already to have FY_Month to define a variable of presentation, but it doesn't seem to work.

  Thanks much for any help you can give!

  Irene

  Guest-> Options-> limit values by

  Select the quick column

  Thank you

  http://cool-bi.com

• How to connect the line of text from one page to another?

  I'm working on a document with a line of text on the title page that I want to repeat on the footer. My goal is to be able to change the text on the title page and automatically update to match on the footer. Can you please suggest the best way to go about this? I started to try hyperlinks and anchors text, but was not able to find a solution yet.

  Search on how to use text Variables in the help. In this case, you probably want to get your title paragraph style.

• Airport Express. Connect to a router home without another device from the airport.

  Looking to buy an AirPort Express station. Plan to connect it to my home router to boost connecting devices and to create the network or guests. This work if I just plug my Express in the router with a cable Ethernet or you will take another product I.e. time capsule to work? The router can also activate "Modem Mode"

  What model is the modem?

  Comments wireless is disabled in all apple routers when they are used in bridge mode... This will mess up your idea to connect to main router... the express (or any wireless router) should then be in bridge.

  If you can fill the main modem... It is pure modem and run the express as a wireless router, then it can produce a network of comments as well... However, Express is slow and far from adequate as a main network router... unless you talk real slow ADSL etc.

• FRS: Lines pouring out to another page in PDF format

  I have a FRS (Financial Reporting Studio, v.11.1.2.3.917; EN Server 11.1.2.3.503.) a report that has accounts in its ranks. Problem I faced is that when I run the report to the spill of lines for PDF format to another page without a certain logic. For example, if the report contains 200 lines, the first page would be complete (say 30 rows), then the second page would have only 5 lines, the third might be new, some fortha gain number of lines (not the same as the #2 page) and so on...

  I tried the grid size, change switch Autosize, nothing helps. From FRS has a number of lines that he wants to fill in his logical page size, and because the physical page is shorter, he spills these additional lines to another page.

  Anyone with the same problem and a solution?

  Thank you
  Mr. Sladic

  Hi River.

  We installed the patch 508, and it solves the problem of paging lines.

  The problem is, there's another bug now - when I put my POV (in Premiere POV) guests for alias, the app does not recognize members, says that they do not exist in the database. I tried to use the "pipette" select POV member in a preview area and still the same. Only when I click on "Enter the value" check box, and my mebers change of name, the report opens.

  I tried this in our previous installation (patch 503) and report open regardles of preview POV being the name or alias. did not check if the same thing happens in the prompt box regularly.

  Think I'll open another SR for this

  Kind regards

  Milos

• Connection problems on the dashboard Business Catalyst

  I recently created a Web site and hosting in via Business Catalyst. I put live (with a purchased and registered through Go Daddy domain), but since he disappeared on-line Business Catalyst will not let me connect on my dashboard to display statistics and make changes exc. I get an error message saying "an error an error occurred processing your last request.» Please go back and try again. "when ever try to log in. Any help on how to solve this problem would be greatly appreciated.

  Hello

  If you have problems to connect you can submit a case via this form here - contact us | Adobe Business Catalyst

  This was not made clear in the article 'Get support' I linked - I added this workflow section, sorry about that.

  I created a ticket for you to study this issue.

  Thank you

  Mihai

• no connectivity between the virtual machines on the guest only network

  I have trouble getting the network connectivity between two Windows 7 computers using a guest only network virtual in VMware Player.  Each virtual machine is able to get a (unique) IP address via dhcp and can ping itself and the bridge, but could not reach the other system.  I looked on my host computer adapter VMnet1 in Wireshark and saw incoming icmp packets in, but nothing is returned new.  My vmnetdhcp.conf file is unchanged with the exception to add a line to set the default gateway on my guests.  It was an attempt to solve this problem, and the same behavior was observed before changing anything.  Here are the details for this network segment:

  subnet 192.168.184.0 netmask 255.255.255.0 {}
  range 192.168.184.128 192.168.184.254;            # by default allows up to 125 VM
  option broadcast-address 192.168.184.255;
  option domain-name-servers 192.168.184.1.
  option domain-name "localdomain".
  routers option 192.168.184.1;  # This is the line, I added
  by default-lease-time 1800;
  Max-lease-time 7200;
  }
  host VMnet1 {}
  Hardware ethernet 00:50:56:C0:00:01;
  fixed-address 192.168.184.1;
  option domain-name-servers 0.0.0.0.
  option domain-name ";
  }

  Is there a problem with my configuration somewhere, or is it just a limitation of VMware Player?

  You may need to allow ICMP traffic of WF with Windows 7 as OS.

  André