connect the second computer to the network

Similar Questions

• Need to connect the network adapter when the ethernet cable is not connected

  Hi all and thanks for reading.  I'm new to the both VMWare Fusion and new on Mac.  I have a new MacBook Pro, I bought a month ago.

  I have software that works only on PC and its license server is linked to the mac address of the NETWORK card.  I am implemented on bridged network mode I use the multiplicity to link the Virtual PC to my other PC and it seems the network mode that works best for this.

  I've set up to work with the virtual address of the NIC card and everything works fine.  The problem comes when I'm traveling and my Mac isn't difficult, connected to an ethernet connection.  When I start the merger, told me that 'the network bridge on/dev/vmnet0 unit does not work"and that she didn't connect the device virtual ethernet0.  Under the terms of the merger, I get this error whenever I try to force the card /virtual machine/network/will connect the network adapter.

  When I'm traveling or not hung, I need to get the virtual running NETWORK card so my license server will take place so that I can run my software.  Any ideas?  Any help is most appreciated!

  Thank you

  Mark

  Change the type of the bridged network to NAT and then start the virtual machine.

• How do I put my modum wireless so that I can connect a second computer to him

  IAM, try to connect a second computer to my dial up modum wireless. my computer has windows vista and the 1 Mei try to hang a windows xp. any help would be greatly appreciated.

  Hi carlsbond,
   
   
  -What is the brand and model of your modem?
   
  -Are you referring to connect wirelessly to a network?
   
  If so, here are some links that might help you.
   
  How to connect to a wireless network in Windows Vista
   
  5 steps: how to set up your network wireless home
   
  Set up a wireless network
   

  Kind regards

  Divya R - Microsoft technical support.

• How to connect a second computer to dynadock U3.0

  How to connect a second computer to dynadock U3.0

  Hey Wayne,.

  For more details on how to connect a computer to the Dynadock U 3.0, contact Toshiba support.

  http://support.Toshiba.com/contact

• Connect a second computer to the wireless printer

  I just installed the Envy 4500 printer software and everything works fine. I would like to be able to print from second computer but have been unable to locate instructions on how to install on a second computer. Can someone direct me to the instructions?

  Hello

  The track is similar to the first computer: place the CD software and drivers that comes with the pronter on the second, third,... computer and run the installation.

  Kind regards.

• Error 800703eb when you try to connect the network printer

  HII guys, can someone help me on this problem?

  I am trying to install the network printer. But I face the error code 800703EB and another description is cause to line 4 and 1 from vbs code tank.

  The following vbs code to connect the computer to the network printer:

  1. '
  2. ' Printers.vbs - Windows Logon Script.
  3. Set objNetwork = CreateObject
  4. objNetwork.AddWindowsPrinterConnection \\printserver\xerox2

  I am very grateful to the response of anyone on this issue, thank you very much.

  Hello

  (1) have you made changes before the start of this issue?

  (2) what is the brand and model of the printer?

  Perform a clean boot and try to connect to the printer:

  Step 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: Try to download and install the latest printer drivers.

  Please visit the websites below:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• How can I connect to another computer in your network? to share photos, music and videos

  I want to connect my computers families so I can share music and pictures they take... but when I click to join their files, it asks me the username and password... is something that someone had put in place or is it in your computer?

  Hello

  1. are you using cable or wireless network?

  2 are all computers that are running Windows 7 on the network?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  No, Windows does not let you to set passwords that limit access to shared folders. However, if you are not on a domain, you can limit network access to the Public folder by turning password protected sharing or disable. This allows only people with a user account and the password for your computer to access the Public folder over the network.

  Whether you are on a domain or not, you can limit access to other folders by choosing to share only with specific people, grant share permissions. Permissions can be granted to an individual or a group of users on the same network, allowing them to access your shared folders. You can also set the level of access, allowing people to just open shared files, or also to change, create, or delete. For more information, see

  Share files via public folders

  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  Sharing files and printers with different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

• Unable to connect the network, it says invalid IP-configuration

  Original title: network problems...

  Please, can you help me with this?

  My network connection between my TomTom GPS and my computer says that it is active, but also says that it doesn't have a current or valid configuration IP, what makes this mean and how can I solve this problem?

  Thank you

  Hello

  1. What is the version of the operating system installed on your computer?

  2. you have made no changes to the computer before the broadcast took place?

  3. What is the exact full error message?

  If you are using Windows 7 and Vista follow below mentioned methods:

  Method 1: Try to reset the TCP/IP stack.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357 .

  Method 2:

   

  Windows wireless and wired network connection problems

   

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope the above information is helpful.

• Problem of local connection only. -After a five-minute Internet connection, the network of the changes at the local level only

  I connect to internet at the top 3 mobile broadband using the supplied usb Huawei 3 modem. It was fine for the first 4 days, it was working perfectly until 2 days ago. Now it connects fine but after about 1 minute of connection (sometimes more, up to 5 minutes max) the connection of the changes at the local level only. I searched the forum and website I can find solutions, but nothing seems to work. If I click on diagnose and repair I get an answer that is different each time, such as 'There could be a problem with one or more network adapters on this computer' or "Cannot communicate with the DNS server" or sometimes it says there is no problem even if it doesn't quite work. Sometimes disconnect and then reconnect works but then after a minute it goes to the local level only again. Any help would be appreciated, it gets very annoying to have to disconnect and reconnect every time that I need to go to another page.

  Here is the procedure to empty the DNS: http://www.mydigitallife.info/2008/08/21/how-to-flush-and-reset-dns-cache/ - but even if it's worth a try, I don't know it can solve your problem.

  If this does not work, then I suggest strongly since it's only a week or older that return you it to where you have it for a replacement or a service while it is still covered by the warranty.  There are several possible causes and we could spend a lot of time searching to find that it's a hardware problem.  They also know their systems better than we do, and maybe it's a simple configuration problem that has not been defined in law or has been accidentally changed after the first 4 days. In addition, more you mess with it, you, more likely they will tell you caused the problem and the warranty - and you certainly don't want that.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Automated connection of the network card in the computer asked after that prompted Boote

  Hi Al,.

  I'm under VMWare ESXi 4 Update 1. I use a pair of firewalls Astaro Security Gateway Computers invited in HA mode on my ESXi 4. My problem is that when the two guest computers are running in HA mode, they are fine. However, when I restart one of them with its virtual NICs defined on 'Connect to the market', it is not 'sync' upward with another. Two firewalls Astaro Security Gateway have a separate NETWORK connected between them for the SYNCHRONIZATION of HA.

  However, when I uncheck the 'Connect to light' and allow the guest to start computer and then 'connect' virtual network cards, they work fine.

  Is it possible to automate the connection of the network of machines comments adapter after, say, x seconds once they are turned on?

  You can connect the network card in 60 seconds after the start of your virtual machine with the following script PowerCLI:

  # Get the VM
  $VM = Get-VM YourVMname
  
  # Get the network adapter
  $VMNetworkAdapter = $VM | Get-NetworkAdapter
  
  # Disable "Connected" and "Connect at power on" on the network adapter
  $VMNetworkAdapter | `
    Set-NetworkAdapter -StartConnected:$False -Connected:$False -Confirm:$False
  
  # Start the VM
  Start-VM -VM $VM
  
  # Wait for 60 seconds
  Start-Sleep -Seconds 60
  
  # Enable "Connected" on the network adapter
  $VMNetworkAdapter | `
    Set-NetworkAdapter -Connected:$True -Confirm:$False
  

  Robert

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

• Second computer connection

  Hello;

  You just bought a new HP Photosmart 5520.  I use a Toshiba computer, 32 bit, running Windows 7.  I followed the

  (sometimes confusing) installation instructions, printer is connected to my computer and wireless network. Great!  When I tried

  to add my wife's computer, the software can't find the printer.  He asked the IP address and I gave him good

  address, it just says: printer is not found.  Woman runs computer Toshiba, 64-bit, Windows 8.  Is there a special procedure to connect a second computer, or is it not possible?  The two computers are connected correctly to the

  WiFi network.

  Thanks for all the inputs

  alanvaj

  Hi @ALANVAJ

  You shouldn't have these difficulties to add the printer on the second computer. Please use the following document to solve the problem; The printer is not found during a wireless network Installation.

  I hope this helps.

• How to set the password to protect the network, Windows XP Home Edition

  Another PC can directly access my computer on the Windows network, so I want to set a password to protect my computer.

  There are two basic methods to connect to a computer through a network.

  The first is through Remote Desktop connection.  This method requires that a user connect as if they were sitting in front of the computer.  So simply assign a password for each user in the user Panel must control this access road.  If I remember correctly, Remote Desktop connections cannot do XP Home computers, so this may not apply to you.

  The second is through the sharing of files on the network.  With XP Home (forced Simple File Sharing), each connection sharing file valid as long as the user "guest".  So to control this access, you must assign a password for the Guest user.

  "Set up the password for the user in Windows XP"
    <>http://support.Microsoft.com/kb/555520 >

  HTH,
  JW

• Premiere Pro CC - Crash when opening because of the network disk cache

  I had the first fail to open for some time now on one of my secondary PC. This computer has been configured with a network drive as its disk cache and links to projects.

  It's as well as several editors can work outside the same RAID. Works perfectly, except for the fact that irreversible windows somehow the network drive. Once that has happened the first does not start and crashes when starting the program.

  I got the network bound upward at some point drive and first launched again running with zero problems. Yet once foires windows, the network drive and the first does not work.

  I need to reset the parameters of creation (disk cache settings).

  THINGS I'VE TRIED:

  I've tried holding Ctrl + Shift to reset, did not work.

  I already tried uninstalling and reinstalling, but settings are not withdrawn and the program crashes.

  I would just connect the network drive and then once the first spear change the disk cache and never do this again, but unfortunately the computer will not repeat on this disc partical.

  Let me know if you need more details,

  I am running windows 8, latest version of CC (just updated). I have 32gig of Ram, I7 overclocked at 4.4 GHz, Nvidia Graphics processor.

  Thank you very much

  Hey there!

  Well now your post is over a year old, but recently, I had the same problem.

  The solution was what you thought: redirect the path. But where? I searched the registry and there you have it:

  Cache 8.0\Media Computer\HKEY_CURRENT_USER\Software\Adobe\Common

  There is a key named FolderPath. Set it on a drive local and first should do it again.

  BTW adobe: this is really a bad bad bug or bad conduct. If something doesn't work not software should ask another solution instead of just diet...

• Unable to connect to the internet from the second computer to the home network.

  One of my computers on home network has stopped working after a storm in which several circuits in the House have been triggered. The computer seems to work very well, and other computers on the network can access the internet by using IE 8. I replaced the ethernet cable and rebooted. No difference. In addition, I checked the Device Manager, which indicates that the ethernet card works fine. Any ideas on what's going on? Thank you.

  Right-click on command prompt and select run as administrator.  If you are using Windows XP, open the command prompt window.

  Type the following command-

  chkdsk /f /r and press enter

  You will receive a message about the disk must be locked and you want to run the scan on reboot.  Press y and press enter

  Reboot the system and go watch TV or read a book because it will take some time.

  Once the analysis is complete, open the observer Application event log and look for wininet.  The results of the analysis it will be there.

  To open Event Viewer, follow these steps:

  1. Click Startand then click Control Panel. Click performance and Maintenance, then click Administrative Tools, and then double-click computer management. Alternatively, open the MMC containing the snap observer of events.
  2. In the console tree, click Event Viewer.

     Application, security, and system logs are displayed in the event viewer window.

  Windows Vista: right-click on my computer and select Manage

  Start safe mode and check in Device Manager for yellow exclamation marks or brands Questions