Connect the wrt54g with wrt160n v2 router

Similar Questions

• How to connect the Ombudsman with several bpel process

  Hi Please someone tell me how to connect the Ombudsman with several processes bpel in soa 11g

  And here

  http://eoracleapps.blogspot.com/2009/11/how-to-call-synchronous-BPEL-process.html

• Problems connecting to the internet with my wireless router

  I have a WRT54GS v7 wireless router that I use with a modem ADSL ZyXEL P-660R-D1. during installation, I was unable to establish a connection to the internet, once my router is properly connected to my desktop computer and my modem. All the correct lights on my modem and router are turned on. Please help, I tried to turn off the two as instructed by the installation wizard, but who failed to make the internet connection works and I continued the installation process after many attempts. At the end of the installation, he said that my router has been set up, but I don't have an internet connection. What should I do to fix this?

  The problem you are experiencing is caused by the fact that you Zyxel and your WRT54GS both try to use the same 192.168.1.x subnet.   Your WRT54GS will not work properly if you try to put the same subnet on the LAN ports and the port Internet (WAN).  Also to note that the installation wizard will not work in your situation, then stop using it.  You will need to manually configure your router.

  There are two ways to solve the problem:

  Option 1) Change the subnet in the WRT54GS.    To do this, follow these steps:

  (a) turn off your network

  (b) disconnect the WRT54GS of other devices.

  (c) connect a single computer via ethernet cable, a LAN on the WRT54GS port

  (d) turn on your computer and the WRT54GS

  (e) point your browser to 192.168.1.1 and connect to your WRT54GS

  (f) change "local IP address" 192.168.2.1, then click the 'Save Settings' button and wait (3 to 60 seconds) of the screen refresh.  You will be probably disconnected from the WRT54GS.  Don't worry about this.

  (g) take out your browser and turn off the WRT54GS and your computer.

  (h) then, using an ethernet cable, connect the Zyxel ethernet port to port Internet (WAN) of the WRT54GS.

  (i) power of your network.  It should work.

  You will now access your pages of configuration WRT54GS to 192.168.2.1

  Option 2) the other way to solve your problem is to change your Zyxel to 'bridge' mode  (You will need to consult your Xyxel user guide, or your ISP website, to find out how to do this).  This will convert the Zyxel a real modem, and then he won't get an IP address.  After that, you need to configure your WRT54GS to your PPPoE connection for you.

  I guess that your Zyxel is a PPPoE connection.  If we perform a PPPoA connection, then does not allow Option 2 because your WRT54GS is unable to make a PPPoA connection.

  Additional notes:

  You don't need to do both options.  Choose one or the other.

  For a more normal web use including browsing, email, downloads, etc., or another option should work fine.  If you are an online gamer, you will probably prefer option 2, because this will make it easier to set up many online games.

• Duplicate name on the network with WRT160N v1

  I get the error "a duplicate name exists on the network" on all my computers.  I just started getting this error about a week ago.  I don't change anything on the network and have had this router WRT160N v1 (with the latest version of the firmware) for about 6 months now.  I spoke with Linksys support and they told me to rename all my computers and reboot the router... which only bypassed the question for 1 day.    In addition to the inconvenience of the error, the only thing it crashes me to connect to any other computer via a mapped network drives.  Print on network printers and internet work very well.

  I wonder if a Windows Update is the cause of this, but not sure.

  Here is my network configuration:

  I have a simple network of peer to peer with 5 workstations and 1 portable wireless.

  All workstations use DHCP except 1 which behaves like a file server with a static IP address.

  All the workstations are XP Pro and laptop is Vista professional.

  WRT160N v1 router DHCP running

  Help or direction would be great!

  I guess when you renamed your computers, you have given a different name to each computer and restarted the entire network after the name change.  If this isn't the case, it is the cause of your problem.

  What LAN IP address static (fixed) do you use for your server?   What is your range of DHCP server?    If you use "DHCP Réservation" to give your server a static LAN IP address, then the address must be within the range of the DHCP server.  However, if you have assigned manually your server an address LAN IP fixed, by entering information in the server, then this fixed LAN IP address must be outside the range of the DHCP server, and it may not end with 0, 1 and 255.

  At least part of your problem (drive mapping) sounds like a problem with computer software firewall.  Go to the software firewall for computer on each computer and set it to "trust", other computers on your network.

  Using an unsecured wireless network?  If so, maybe your neighbor put his computer to use one of your computer names, and it connects to your network (accidentally or intentionally).   If you have an unsecured wireless network, secure it.

  In addition, check the MAC addresses on all your cards, ethernet and wireless adapters and see if both is the same.   Surprisingly, some manufacturers do not give MAC addresses unique to their network devices and perhaps is to confuse the router.

  In addition, you use a wireless Repeater in your network?  Sometimes this problem with duplicated names occurs when a wireless Repeater is used.  Yet once, if you have an unsecured wireless network, maybe your neighbor runs the Repeater of fire!

  Do one of the computers that are connected to the router, also have a wireless adapter?  If so, make sure it's off.

  If you would like more information, please state the brand and exact model of the card number wireless laptop.

• Connect the 2 locations using RV016 router to fill 2 different networks.

  I have a RV016 connected to a comcast cable modem to slot 1 with IP 192.168.6.1

  I have a RV016 connected to a comcast cable modem at the 2 with 192.168.10.1 IP location

  I installed a VPN tunnel from gateway to gateway between 2 routers RV016.

  I have a LAN in slot 1 with the IP 192.168.1.1, which connects to the internet through an Adtran router with 4 lines of T1 servile.

  I have a LAN with IP 192.168.5.1 2 location that connects to the internet through an Adtran router with 3 T1 lines servile.

  I like a computer to location 2 to connect to the RV016 in the local Comcast modem to the Comcast modem at location 1 in the RV016 to slot 1 then go out to the local network at location 1 and communicate with an application server on LAN 1.

  Help, please.

  You can't do that with a RV016. The RV016 only supports layer 3 tunnel. This means that the two ends are different networks with different subnets. The traffic between them is not filled.

  If you want to really two bridged networks, i.e. join in a single LAN with a single IP subnet and a single broadcast domain you need a layer 2 tunnel, for example a tunnel L2TPv3. That works on layer 2, which is on the MAC addresses inside your networks. In this way, you can use the same IP subnet at both ends and on each side, it seems that the other side is connected to the same ethernet network.

  The RV016 does not support the tunneling of layer 2. You can create an IPSec tunnel, which is layer 3. If there is really a need for a tunnel layer 2, you get different devices. I recommend that you evaluate if a layer 2 connection is really necessary or not.

• Connect the TV (with sound) and monitor for Optiplex 390

  Here is my system info:

  OptiPlex 390 small footprint

  Windows 7 64 bit

  Intel Chipset H61

  Intel HD 2000 (with HDMI and VGA) graphics card

  Map of AMD Radeon 6350 512 MB video (with 2 DVI splitter)

  I need to connect 1) HD TV with the sound via HDMI and 2) monitor via VGA to this system (no sound).  I did a lot of research on the Internet but can't find a definitive answer if my system will support both views.  Can anyone confirm if one of the three options below does not work, or any other ideas?

  Option 1: remove AMD card, connect the HDMI TV, connect the VGA monitor.  I've seen conflicting information if the HDMI and VGA ports can be connected at the same time.

  Option 2: Connect TV: dispatcher--> DVI HDMI adapter DVI-->--> TV, monitor connect a HDMI cable: dispatcher DVI DVI VGA adapter--> monitor-->.  It should work, but if someone can confirm if the AMD Radeon 6350 supports audio through DVI to TV?

  3rd possibility: buy another video with HDMI and VGA card.  I'd rather not spend more money... I have six systems to connect!

  Thank you in advance for your help!

  Hi Ozone72,

  Intel HD Graphics 2000 which was shipped with OptiPlex 390 supports two independent screens. Which means that you can connect TV for VGA and HDMI monitor, so that AMD card must be removed from the computer.

  Please try it and return back if it worked.

• Connecting the frames with scroll

  

  I've created a scenario planner of the wall as shown above. The month and the content below are in a floating frame that scrolls back and forth. The problem I have is that when I scroll down, I lose the months. So, I wanted to know if there is a way to connect the 2 frames with scroll separated? Really it pasted it and am sure that's not possible, so thought I would ask experts.

  Thank you very much

  Steve

  I'm sorry but I don't have time for a long answer. If you read my post above, once again, you will see that you need create two moving images.

  1. just below the month set to vertical content.

  2. one that contains the first one grouped with the months set horizontally.

  Try it and tell us.

• How to connect the call with Vmware technical team

  Hi we have a year of SnS with VMWare, suppose if we want to record the call with Vmware for any support issue, who can do. Y at - it of the form to fill out or any other.

  Help, please.

  Kind regards

  Khurram Shahzad

  See the support link at the top of this page? Until it clicks.

  On the support page, bottom left hand side, you can click the link to create the SR

  https://www.VMware.com/support/login.do

  Please consider my response as 'useful' or 'proper' marking

• Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

  I hava a ME Cisco 3400 with physical single port available for a cable connection.

  The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90.

  The host computer is a dual Xeon computer with two NICs for LAN and WAN.

  Fields of application: to install a windows 2008 R2 between public and private network server.

  Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers)

  The desired configuration:

  To have installed with his roles behind a WS2008R2 has RRAS. without a VPN.

  b with VPN

  and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255).

  First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD)

  Network configuration:

  Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing:

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  OK, I can browse the internet.

  Second stage. (Consider DNS and Active Directories)

  DNS instaled role for this computer.

  AD installed as a global catalog.

  NETWORK WAN server that is directly connected to the Cisco router:

  Conection area 3

  Properties:

  Client for Microsoft Netwaork: not verified

  Network Load Balancing: not verified

  File and shared printer: not verified

  QoSPacketScheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: not verified

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: not verified;

  Use this connection DNS suffix in DNS registration: not verified;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: don't check;

  Disable NetBios on TCP IP: checked;

  Connection to the local network 2

  Properties :

  Client for Microsoft Netwaork: checked

  Network Load Balancing: no

  File and shared printer: checked

  QoS Packet Scheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4 checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  NETWORK LAN CARD: 192.168.0.101

  Mask: 255.255.255.0

  Gateway: 192.168.0.1

  under Advanced tab:

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: check;

  Disable NetBios on TCP IP: not verified;

  Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator.

  In any case, for the beginning, I have a fix IP, do not get IP automatically.

  At this point, it gets the configuration simple posible for RRAS follows:

  3, LAN connection that corespond to the WAN interface IP:

  "NAT configured for the following Internet interface: Local Area Connection 3.
  The clients on the local network will assign the IP addresses of the following range:

  network address: 192.168.0.0. netmask 255.255.0.0.

  After Windows RRAS are open:

  The Network Interfaces tab:

  NICs are enabled and connected;

  UAL remotely & policies:

  Launch NPS,

  on the NPS server tab:

  Allow access to successful Active Directory directories:

  Properties: authentication: port 1812,1645

  kept port 1813,1646;

  on the accounting tab: nothing;

  under NPS policies:

  Grant permission for the RRAS server under builin\Administrator of the accounts;

  On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn)

  under the static road: nothing;

  under the IPv4 tab or both are there(there IP) and are up

  under NAT

  Connection to the local network 3: public interface connected to the internet

  enable NAT on this interface:

  under the address pool: ISP addresses public;(two addresses)

  under the terms of service and the ports: Web server: http 80.

  (I have I have a static IP address for the client computer in mind, I set up a single customer).

  At the client computer :

  configured as domain customer and added to the users AD and computer AD

  logon to the domain:

  Local Area Connection

  Properties:

  Client for Microsoft Netwaork: checked

  Network Load Balancing: not verified

  File sharing and printer: checked

  QoS Packet Scheduler: checked;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 192.168.0.101

  Mask: 255.255.0.0

  Gateway: 192.168.0.1

  DNS: (auto-add the same to the local machine).

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: checked;

  Disable NetBios on TCP IP: not verified;

  right now the 192.168.0.101 client cannot connect to internet through RRAS.

  ;

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Trouble connecting to internet with WRT160N

  I have problems with internet on my mac mini.  The mac mini is connected via ethernet and is really slow.  Sometimes, it works very well.  Other times looks like 3 tries to load a page.  Sometimes it does not.  You never know.  The thing is my macbook is connected wireless and works perfectly.  The mac mini is even when my macbook is disabled.  He didn't get it until I bought the router, and it worked very well the first days of use of the router.  Any suggestions?

  Is your router WRT160N v2 model? Then check if your firmware is build 11. If so, you should downgrade to build 8. We will be happy to help you with that.

• How to connect the cluster with unbundler the help of scripts of VI

  Hello

  I'm not so known in Labview. I am tring do VI script for you to connect to a digital cluster with a unbundler.

  I could create cluster and unbundler. But I am not able to connect.

  I have attached the VI and the image of the code.

  Help, please...

  Thanks in advance...!

  Sharon

  Same VI compiled to 8.6

  Christian

• Error 1073807246 after connect the datalogger with the computer

  I have labview vi to get data from the data logger.

  First of all, it is excutable without error

  

  , but when the data logger is connected to the computer (COM1 serial port), my vi labview error 1073807246 shows.

  I know a little about this error, it means open a visa which was opened, but donot why error occurs when the datalogger connect with the computer.

  I just copy this previous labview vi of the lab computer, it worked well on this computer.

  Thanks much for any help.

  

  It's pretty clear you have some major, major misconceptions. The provider software is not required for a LabVIEW program and in fact is at the origin of the conflict. Windows allows more than a program unique access to com ports and as long as you remain convinced that you have continues to run this program, the LabVIEW program will never run. Certainly, the other pc is configured to use a port com for this program and for LabVIEW.

  If indeed the other program is needed, the program LabVIEW was written not as a comprehensive control program.

• How to connect the worm 4.3 BEFSR41 router to a modem that is always on

  Hi I have a westell modem ATT DSL, it is a new modem, I had one that force me to use PPPoe on my BEFSR41 ver 4.3 router Linksys, I wonder how I have now reconfigure the. He didn't need me use PPPoe because she is always on when it is connected directly to my PC I have 4 video game systems that use static IP that are transmitted through my router and 3 PC windows port & printer using other my network products are by linksys NAS200, BEFSR41, WAP54G and 2 group network 5 & 8-port switches , I lost my CD of AP wireless how do I do that I reconfigure without the CD. Please answer as soon as possible

  That you no longer use the PPPoE settings on the router... On the Configuration tab, select "Obtain an IP automatically" under Internet Connection Type and click on save settings... Now, click the status tab and check the IP address. If the IP 192.168.1.x is then, click the Configuration tab and change address router ip 192.168.2.1 and click on save settings. Now, power cycle the entire network and check your internet connection to computers connected to the router.

  Now for the other devices like WAP54G or computers (for which you have opened the ports on the router), you must assign the static IP address in the range of IP (i.e. 192.168.2.x) of the router.

• Connect the 7610 with USB cable

  Hello

  Try connecting a HP7610 printer to my XP laptop that only has USB ports

  Is it a USB 2.0 has a cable work?

  Thank you

  JF

  Hi @hp7610,

  Welcome to the HP Forums!

  I noticed that you are trying to connect your HP Officejet 7610 to your Windows XP laptop. I'm happy to help you!

  You'll need is a USB 2.0 A to B cable, so that it works correctly with a USB connection.

  Moreover, according to the specifications of your printer, Printer Specifications for series e-all-in-one HP Officejet 7610 Grand Format (H912). You can use an Ethernet cable or a wireless connection as well.

  Hopefully this information is what you are looking for and have a good day!

• Connect the sx20 with polycom endpoint

  Hi guys

  I would like to know if there are special requirements to connect fast sx20 Cisco with other brands of for example, Polycom, Lifesize, Sony telepresence... Customer has 3 locations and now want to replace one with the sx20

  I'm not good in technical issues

  TKS a lot

  You may need the licence Multisite to the Conference, you will also need a public static IP address depends on who's going to make the call.

  other than that just set up the H323 section in the faucet of the configuration and you're ready to go.